Providing Road Safety Items To The B.T Road Over Grb Flood Bank From Muramulla To Pallamkurru In Dr.B.R. Ambedkar Konaseema District., KONASEEMA-Andhra Pradesh

Providing Road Safety Items To The B.T Road Over Grb Flood Bank From Muramulla To Pallamkurru In Dr.B.R. Ambedkar Konaseema District.--105.00 Supplying of hot applied thermoplastic road marking compound, 2.5mm thick including reflectorizing glass beads @ 250gms with Reflectorizing Glass Beads on Bituminous Surface at 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass bead as per IRC: 35. the material should be of BERGER Company/ BERGER Equivalent/ Equivalent brand and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. 54.00 Supplying & Fixing of Molded Shanks Raised Pavement Markers made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97, Dt:11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 700 Kgs. Fixing will be by drilling holes on the road for the twin shanks to go inside, without nails and using epoxy resin-based adhesive as per manufacturers recommendation and complete as directed by the Engineer - in - Charge. 15.00 Providing and fixing Cautionary / Warning sign boards size 600 mm equilateral triangle made out of Type XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White color and letters/logos done by screen printing. in Black color, boarders by screen printing in Red color and fixed over 4MM Aluminum Composite Material sheet having minimum 0.5 mm thick Aluminum skin on both sides with back side painted grey color and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4rnm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White color with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials, equipment machinery and labor with all leads and lift, loading changes necessary for satisfactory completion of the work as directed by Engineer -in-Charge 274.00 Providing and erecting a W metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post. 150X75X5 mm spaced 2m center-to-center, 1.80m high, 1.1m below ground/road level. all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and S: 1364. metal beam rail to be fixed on the vertical post with a spacer of channel section 150X75X5mm, 330mm long complete as pe Clause 810 etc., complete as directed by Engineer -in-Charge

Refer document

INR 10000.0 /-

INR 8.43 Lakhs /-