Tender For Internal /External Water Supply In Sector -164, Noida (Electrification On Tube Well And Ugr) - Painting Of The Electric Pole & Channal With 2 Coats Of Aluminium Paint Over Red Oxide Primer Complete In All Respects. 2 S/L Of Al. Conductor Pvc , noida-Uttar Pradesh

Tender For Internal /External Water Supply In Sector -164, Noida (Electrification On Tube Well And Ugr) - Painting of the electric pole & channal with 2 coats of Aluminium paint over red oxide primer complete in all respects. 2 S/L of Al. conductor PVC insulated annoured served, sheathed cable 1100 V grade at a depth of below ground level over a cushion of 750 mm below ground level over a cu hion of 75 nun thick sand alround protected with burnt brick on sides and on top. On sarface·face the cable run shall be fixed on MS clamps etc. of suitable size or as directed by Ell complete in all respect. The am10uring of the cable shall be properly connected with the earth conductor by clamps etc. 3 10 Sqmm. 2 core. 4 16 Sqrnm. 2 core 5 70 Sqmm 3 1/2 core. 6 240 Sqmm 3 1/2 core. 7 400 Sqmm 3 1/2 core. 8 S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respect as per direction ofE/I. 9 10 Sqmm 10 16 Sqmrn 11 35 Sqmm 12 70 Sqmm 13 240 sqmm 14 400 sqmm 15 S/F of earth elctrode for lighting conductor of 600mm x 600mm x 6mm GI plate ve11ically with its top at least 3.0m below ground level complete with 20mm GI pipe for watering funnel, 30 cm square C. I. bolt with cover rnasonary housing alternate layers of cl Jrcoal/coke and salt at least 150mm thick alround etc. as per dirvction of E/l. 16 S/L of 25mm x 3mm GI strip from each electrode directly in the grvund complete in all respect. 17 Supplying and laying of OD/ID-63/51 DWC HDPE pipe TSI marked along with all acces:;ories like socket, bend, couplers etc. conforming to IS 14930, Part 11 complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 18 S/F of LED Street light Fitting having die cast aluminium body nd diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to I P66 Protection Complete in all respect. Cat-AA 19 S/F of Recess/Surface/Pendent mounting round 24 Watt LED Down Lighter having Powder Coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. Cat-AA 20 S/F of LED Tube Light with Batten suitable for upto lx22 Watt LED Tube Light complete i/c Tube etc. on surface complete in all respect. Cat-AA 21 S/F of 200 Amp. 415 V metal clad TPN CFS complete with HRC fuse set etc. on angle iron frame complete in all respects Cat B. 22 Wiring point for light with 1.5 sqmm FR PVC inslulated multistrand single core copper conducter cable as earth wire rawn inside the conduit in heavy gauge PVC conduit pipe in the , all parriily concealed in wall & paiiialy laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire and piano type switch & celling rose/angle/batten holder on 3mm. thick phenolick laminated backelite sheet etc. complete in all respects, as directed, i/c matching colour wash. 23 Wiring point for Plug with 1.5 sqmm FR PVC inslulated multistra_nd single core copper conducter cable as earth wire drawn inside the conduit in heavy gauge PVC conduit pipe in the wall parrtily concealed in wall & partialy laid in slab along with the reinforcement before conrceting, complete with 14 SWG opper earth continuity wire and piano type switch & socket etc. ornplete in all respects, as directed, i/c matching colour wash. · 24 Wiring point for H.V.M.V./Sodium Vapour lamp with 1.5 sqmm FR PVC inslulated multistrand single core copper conducter cable as earth wire drawn inside the conduit in heavy gauge PVC conduit pipe in the wall parrtily concealed in wall & parti_aly laid in slab along with the reinforcement before conrceting, complete with 14 SWG copper earth continuity wire and piano Jype switch etc. complete in all respects, as directed, i/c matching colour wash. 25 Supply and laying of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality. 26 S/F of steel tubular pole 11 Mtrs. Long Designated 410 SP 36 complete in all respect 27 S/E of straight MS channel top 100x5x2240mm (9.2 Kg.) 2.50 m. long as per direction of E/I. 28 S/F overhead line with ACSR conductor RABBIT/ RECON category one pole service bracket including bindng etc. complete in all respects. 29 S/F of 11 KV pin 12 long with insulator of jay Shri make fixed on cross arm on HT pole I/c all T&P. 30 S/F of 11 KV disc insulater 70 KN and fitting B & S heavy duty with clamp of cros arm fixed on HT poles 31 S/F/ of 11 KV TPMO ralko/azad/rama make 9 nos. isulators of jai shree/bhel/rama/rashtriya makecomplete in all respect as poer direction of E/I ( Jai shri make) 32 S/F of IOOA/415V metal clad TPHRC type switch fuse unit complete with HRC fuse on on angle iron bracket complete in all respects. 33 S/F of stayset stleast 3.5M away from the pole complete with glavanised 19mm dia x 1.80M long stay rod 30 cm x 30 cm x 6.3 mm anchor plate. stay insulator 19 mm x 60 mm double screw, tightener 7/3165 mm GI stay wire etc. in 1:3:6 cement concrete complete in all respects. 34 Supply, Installation, testing and commissioning of 63 KVA transformer aluminium wounded paramax/ P.M. Make on double pole structure duly complete connection with existing TPMO etc. as per direction of E/I. This job will also inc. the arrangment for inspection by Asstt. Electrical Inspector Govt. of U.P. including inspection fees etc. complete in all respect. 35 Supply, errection, testing and commissioning of 250 KVA copor wound out door type distribution transformer power make on double pole structure duly complete connection with existing TPMO etc. as per direction of E/I. This job will also included the arrangment for inspection by Asstt. Electrical Inspector Govt. of U.P. including inspection fees etc. complete in all respect. Kirloskar make 36 Supply and laying of3 core standered aluminium conductor XLPE(Cross linked polyethylene)insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connectedwith earth conductor by clamps etc. 37 b) 120 sqmm 3 core 38 Supplying and making indoor/outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required : 39 a) 120 sqmm (Indoor) 40 b) 120 sqmm (Outdoor) 41 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal) 42 Brick work with F.P.S.bricks of class designation 100 in foundation and plinth in; cement mortar 1:4 (1cement:4 C.Sand) 43 12 mm thick cement plaster of mix 1:3 (1cement :3 c sand) with a floating coat of neat cement. 44 P/L in position Cement Concrete of specified grade excluding the cost of centering and shuttering – all work up to plinth level 1:4:8 (1 Cement : 4C. Sand : 8 graded ston agg. 40 mm N.S.) 45 P/L in position Cement Concrete of specified grade excluding the cost of centering and shuttering – all work up to plinth level 1:2:4 (1 Cement : 2 C. Sand : 4 graded ston agg. 20 mm N.S.) 46 Steel work welded in builtup section/frame work I/c cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel eyc. As required. 47 In grating,frame ,guarders, ,radders, railings, bracket,Gate and similar works. 48 S/f of the top MS cap cum clamp with 11 KV 12 long pin with insulator on HT pole the clamp should be made 50x6mm MS flat.

INR 2124 /-

INR 79700.0 /-

INR 39.80 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB