Name of Work: Upgradation of existing apartment 04 on the ground floor of mallige into a conference centre - Interior works
Sl. No.
Item Description
1
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine,necessary support runners for frame work to hold concealed hinges for shutters etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)
2
Providing and fixing stainless steel fancy type consealed 4\"\" handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.
3
Providing and fixing stainless steel soft closing hettich spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
4
Providing and fixing stainless steel normal heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per direction of Engineer- in-charge
5
Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-incharge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)304 grade 1nos thale,1nos plane,1nos cutlary.
6
Providing and fixing Pull out dustbin with necessary support screws as per approved drawing.
7
Providing and fixing wooden Wall panelling with water proof ply wood finished with 4mm thick veneer on externaly as per approved pattern and a coat of wooden promer for internal surface , supported by wooden frame work as required at site/drawing with keln/sal wood runners applied withwood primer etc., as directed by EIC.Note: 1.thickness of ply wood/veneer for coping and paneelingshould be as per drawing. 2. thickness and shade of veneer should be got it approved. 3.Support frame work should be as per drawing/site conditions.4.The finished wall painting/flooring should not be disturbed during course of work.Green Ecotech ply inside plywoodframe and 4mm teekwood or bechwood venner with malament polish finished
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
