}

Tender For Nagla Electric Light Installation Work Of Bhagwan Singh From Sumbars House In Nagla Bhandari - Supply & Fixing Supply Of Steel Tubular Pole 9.50 Mtr Long Desidnaled 410 Sp-39 In 1:3:6 Cement Concrete Foundation Complete (Soh No.619) Supply And, kasganj-Uttar Pradesh

Rural Development Department has published Tender For Nagla Electric Light Installation Work Of Bhagwan Singh From Sumbars House In Nagla Bhandari - Supply & Fixing Supply Of Steel Tubular Pole 9.50 Mtr Long Desidnaled 410 Sp-39 In 1:3:6 Cement Concrete Foundation Complete (Soh No.619) Supply And. Submission Date for this Tender is 28-03-2025. Electric Pole Tenders in kasganj Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

48365423
Tender For Nagla Electric Light Installation Work Of Bhagwan Singh From Sumbars House In Nagla Bhandari - Supply & Fixing Supply Of Steel Tubular Pole 9.50 Mtr Long Desidnaled 410 Sp-39 In 1:3:6 Cement Concrete Foundation Complete (Soh No.619) Supply And
Open Tender
Indian
Uttar Pradesh
Kasganj
28-03-2025

Tender Details

Tender For Nagla Electric Light Installation Work Of Bhagwan Singh From Sumbars House In Nagla Bhandari - Supply & Fixing Supply of Steel Tubular Pole 9.50 Mtr Long desidnaled 410 SP-39 in 1:3:6 cement concrete foundation complete (Soh No.619) Supply and fixing of 6 way steel frame arm for fabricated round pipe heavy duty bracket for 06 nos. of 180 watt LED lamp with NC lacquer, acrylic lacquer and 2k PU paint, painting and fitting complete all respect(market rate) 2 Supply and fixing ofsteel frame arm for fabricated round pipe heavy duty bracket for 100 watt LED llamp with NC lacquer, acrylic lacquer and 2k PU paint, painting and fitting complete all respect(market rate) 3 Painting of electric pole with 2 coats of aluminium paint over red oxide primer.. Complete in all respect (Sch 634) 4 Supply and burring of Safe Earthing Electrode T-19 (Hot DipGalvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12. mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated so3 (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing SI No. 725A 5 Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laId in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. 6 Supply and fixing of factory wired integral LED flood light luminaireswith die cast aluminium housing built with dirver set suitable for 75 to 100 Watt. Confirming to IP 66 protection complete in all respect. S.I. No. 1455 Cat AAA 7 Supply and fixing following capac;ty of 15A SPN automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. SI No. 807 a (ii 8 Supply and laying of 10 sqmm 2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete In all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SI No. 501 b 9 Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc complete in all respect. SI No. 409 Cat AAA • 10 Supply and wiring of submain with two number 2.5 sq.mm. PVC insulated 1100 V grade single core aluminium conductor cable in 20 mm dia. Pvc conduit with 1.5 sqmm earth continuity wire etc.,complete in all respect. S.I No. 1301 C 11 Supply and fixing of 6 Amp to 32 Amp SPMCB (10Ka) C Curve S.I. No. 1002 Cat A 12 Supply and fixing of radium sign board with lettering & numbering on pole with photography each pole (2ft x 3.0 ft)

Key Value

Document Fees
INR 1000 /-
EMD
INR 42100.0 /-
Tender Value
INR 21.05 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail