Tender For Electrification Work In Meeting Hall Toilet Block And Parking Near Jail Compound At Meerut - Wiring Point For Lightwith 1.5Sq. Mm Frlsh Pvc Insulated Multistrand Copper Conductor Cabelin Pvc Conduit Concealed In Wall Complete With 1.5 Sq -Mm Fr, meerut-Uttar Pradesh

Tender For Electrification Work In Meeting Hall Toilet Block And Parking Near Jail Compound At Meerut - wiring point for lightwith 1.5sq. Mm FRLSH PVC insulated multistrand copper conductor cabelin PVC conduit concealed in wall complete with 1.5 sq -mm FRLSH PVC multistrand single core copper conductor as earth wire drawn inside the condut with GP box Modular type switch and celling rose / Batten holder complete in all respect as directed in ENC including matching colour wash complete in all respect 2 wiring point for fan/fresh air fan with 1.5sq. Mm FRLSH PVC insulated multistrand copper conductor cabelin PVC conduit concealed in wall complete with 1.5 sq -mm FRLSH PVC multistrand single core copper conductor as earth wire drawn inside the condut with GP box Modular type switch and celling rosecomplete in all respect as directed in ENC including matching colour wash complete in all respect 3 Supply & Fixing 5/6A modular switch and socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 4 Supply & Fixing 5/6A modular switch and socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5 S/F of suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing two nos. 3 pin 5/6 A modular socket outlet and two nos. 5/6 A modular switch, connections etc. as required. 6 S/F of suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket and 15/16A modular switch, connections etc. as required. 7 Add for Invertor Wiring in wiring Point for light/ Fan/ Plug with 1.5 mm Cu Wire 8 S/F of 125A3P MCCB 36 KA @ CAT- A 9 S/F of 63A4 Pole MCB 10KA @ CAT- A 10 S/F of 40/63A DPMCB 10KA @ CAT- A 11 S/ f of 6A-32A SP MCB 10 KA @ CAT- A 12 S/ Burrying600x600x3mmGI plate vertically for with its top at least 3 meter below ground level with 20 mm dia G.I. Pipe and funnel for watering and twoearthingleadwith 30 cm sq cast iron frame with hinged cover measonary housing alternate layer of charcol/coke and salt at least 150 mm thick around complete in all respect. 13 S/F OF 25x 5 mm GI strip for earthingon G.I clamps on surface complete in all respect 14 S/f surface mounting 4 wayTPN DB with additional metal door without MCB complete in all respect @ cat-A 15 S/F following way, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconncetions, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 6 way SPN DB 16 S/f of surface/Flush mounting 4 way VTPN DB with additional metal door withoutMCCB 160A complete in all respect. 17 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground levelover a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in allrespect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 70 Sq mm x3.5 core 18 same as above but for 6 Sq.mm x 2 Core Aluminium PVC armoured grade U/G cabel 19 Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required. Size 70 sq.mm x 3.5C 20 Installation fo exhaust fanin the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Up to 450 mm Sweep. 21 Supplying and fixing call bell/buzzer suitable for single phase, 230 V complete as required. 22 Supply and wiring of submain with 2 Nox6sq-mmFRLSH PVC Insulated 1100 VGrade single core Multi strand copper conductor cabel in 25 mm dia heavy duty PVC conduit Conceled in wall complete with 1 NO 4 Sq mm as a earth copper wire drawn conduit 23 Same as above but for submain 2Nox4Sq.mm with 1 No. 2.5 sq.mm conductor cable as earth wire drawn in concieled conduit including matching colour wash etc complete in all respect 24 Same as above but for submain 2Nox2.5sq.mm with 1 No. 1.5 sq.mm conductor cable as earth wire drawn in concieled conduit including matching colour wash etc complete in all respect 25 Same as above but for submain 4NoX 6 Sq.mm with 2 No. 6 sq.mm conductor cable as earth wire drawn in concieled conduit including matching color wash etc complete in all respect 26 Same as above but for submain 4NoX 16Sq.mm with 2 No. 6 sq.mm conductor cable as earth wire drawn in concieled conduit including matching color wash etc complete in all respect 27 Supply and fixing and concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction ofEngineer in charge. 28 Supply and fixing of G.P. Modular switch box for 1 / 2 Module of approved make made up of 1.0 mm thickISI Marked G.P.sheet including adjestable Nakkaandholes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. 29 S/F ofT,V, socket point modular complete in all respect. 30 Supply and drawing co-axial TV cable RG-6 grade, 0.7mm. Solid copper conductor PE insulated, shielded with fire tinned copper braid and procted with PVC seath in the existing pipe complete in all respect. 31 S&F of 125 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. 32 S&F of 63 A 4 pole. 415 V Heavy Duty change over switch on angle iron frame complete in all respect. 33 S/f DP sheet steel enclosure on surface/recess along with 25/32 A 240V C curve DP MCB complete with connections, testing and comissioning etc. as required. 34 s/f of LED street light fittingwith mandatory driver set having die cast aluminium body and lense suitale for 90 W and confirming to IP 66 protection having company LOGO Engraved complete in all respect including labour CAT-AAA 12100-14300system lumans High Power LED with lenses 110 lm@W PF 0.95 THD 10% at full load CRI 70, Potted driver set (Not Circuitory), Phase to Phase Protection at 440 V & 300 V auto cut and restart feature with 5 year warranty. make-crompton/phillips/havells 35 Supply and fixing of 36 Watt to 46 Watt indoorRecess mounting (2X2) LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body withextended heat sink and diffuser of SpecialPolycarbonatemeterialanddriverset complete in all respect. CAT-AAA 36 S/FLED Tube light with metal heavey duty Box type Batten light fitting 1x22 W Suitable for upto 1x22 W LED poly Carbonate tube light complete including Tube suitable for both surface & suspended complete in all respect cat-AAA2420 system lumens, 110lm/W, PF0.95 THD 10%CRI80Sheet thickness .8 mm tubewith aluminium heat sink with5 year warrantee. Make- Crompton/Havells/ Phillips 37 Supply and fixing ofwater tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in allrespect. CAT-AAA S/f of Bulk Head 10W 38 S/F Recess/Surface Mounting Round 12-15 W LED Down Lighter Powder Coated Die Cast Aluminium Housing with Heat Sink Diffuser/Reflector anddriver setcompletein all respect CAT-AAA 1980-2200 system lumens, 110lm/W, PF0.95 THD 10% at full load,CRI 80 with 5 year warrantee. 39 Supplyandfixingof 3Wattto 6WattLEDMirrorlightluminaireConfirmingtoIP 66 Protection complete in all respect. CAT-AAA 40 S/ fixing of ceiling fan 1200mm sweep size (BLDC) 5 star including all accessories. 41 S/F of Fresh air fan 300mm sweep size Light duty complete in all respect 42 S/F of fire extinguisher CO2 type 4.5 Kg capacity complete in all respect. 43 S/F of fire extinguisher ABC type 4.0 Kg capacity complete in all respect.

INR 854 /-

INR 160000.0 /-

INR 15.94 Lakhs /-