Tender For Construction Work Of Drain And Road (Interlocking) In Anandlok Colony Ward No. 03 Girdharpur - Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Dispos, mathura-Uttar Pradesh

Tender For Construction work of drain and road (interlocking) in Anandlok Colony Ward No. 03 Girdharpur - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge: DSR 2023 I.NO 2.1 2 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). DSR2023 I.NO 4.1.8 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 2023 I.NO 6.1.1 4 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR 2023 I.NO 13.4.1 5 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 2023 I.NO 4.1.3 6 Providing, laying spreading & compacting of granular sub base by providing close graded (Fr-1) materials, sprading in uniform layers with Mortor Graded on prepared surface, mixing by mix in placed method with Rotovater at OMC and compacting with in layers with smooth wheeled Vibratory Roller to achieve the desired density, complete as per MoR &H clause 401& as directed by Engineer Incharge including all machine charges & including all labour, T& P etc req for proper completion of work. Analysis rate.(As per MORTH 502 and PWD SOR 2022-23) 7 Supply & Laying ofprecast concrete Block ( Interlocking tiles) for paving of thickness 80mm rubber mould grey (Compressive strength not less then 30Mpa as specified in IS:15658 and weight 4.50kg)as jindal,naval or equivalant Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work as specified in IS 15658:2006. as directed by E/I. SN0.16 New item page 52 chapter 20 UPPWDSOR 2022-23 8 Supply & Laying ofprecast concrete Block ( Interlocking tiles) for paving of thickness 80mm rubber mould coloured(Compressive strength not less then 30Mpa as specified in IS:15658 and weight 4.50kg)as jindal,naval or equivalant Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work as specified in IS 15658:2006. as directed by E/I. SN0.16 New item page 52 chapter 20 UPPWDSOR 2022-23 9 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) dsr 2023 i.no 5.1.2 10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. dsr 2023 i.no 5.22A.6

INR 1180 /-

INR 157000.0 /-

INR 15.76 Lakhs /-