Tender For Plumbing Maintenance & Overhead Tank In Buland City Centre Residential Floor, Electrical Fitting Work In Basement - Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including, bulandshahr-Uttar Pradesh

Tender For Plumbing Maintenance & Overhead Tank In Buland City Centre Residential Floor, Electrical Fitting Work In Basement - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 2 80 mm nominal dia pipes 3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4 In cement mortar 5 Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. 6 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 7 110 mm diameter 8 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 9 Coupler-110mm 10 Single tee with door-110x110x110mm 11 Single tee without door-110x110x110mm 12 Bend 87.5-110mm bend 13 Wiring an elctrical tubelights along with necessary installation in first basement.Note:- Payment will be done as per actual 14 GST

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	24-03-2025	Date_Extend	Date	28-03-2025

INR 2950 /-

INR 44320.0 /-

INR 22.16 Lakhs /-