Tender For Sitc Of New 35 Kva Diesel Generator Set At Fsd Koppal At Depot In Financial Year 2024-25; 1 Supply, installation, testingand commissioning of CPCB IV +35kVA DG Set,415V,3 phase, 4 wire, 50Hzat 0.8p.f< &% dBA prime duty diesel generatorincluding with acoustic enclosure andsuitable for Controller, with radiator cooled engine, alternator, 12V batteries charger with battery leads and Residential Silencer with accessories, common base plate, anti vibration mounts, first fill of Lube oil, drip trays etc. as required. The DG set should meet the requirement of CPCB- IV + [Load trials should be planned at the manufacturers / suppliers premises at their expenses] The DG accoustic enclosure shall have inbuilt fuel tank bed. The system shall comply with the norms of the statutory bodiescomplete with connections ,testing and commissioning etc as required. 2 Supply, installation, testing & commissioning of Inbuilt AMF control panel for auto change over in line with specifications of 2Nos. 130 Amps 4 Pole Power Contactor & 2Nos. 125 Amps 4 Pole MCCBand 4 no.s Aluminium bus bar system for internal connection complete with necessaryaccessories .etc as required. 3 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required..(DSR 2022 Item no.5.4) 4 Providing and fixing 25 mm X 5 mm G.I Stip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.(DSR 2022 Item no.5.11) 5 Providing and fixing 25 mm X 5 mm G.I. strip on surface or inrecess for connections etc. as required. (DSR 2022Item No. 5.15) 6 Supply of PVC insulated and PVC sheathed XPLE power cable of 1.1 KV grade armoured UG aluminium conductor cable conforming to IS 7098 part 1 with up-to-date amendment of the following size as required.4 X70 sq.mm 7 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulatedand PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 120 sq. mm (45mm) (DSR 2022 -Item no.9.1.24) 8 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required 90 mm dia (OD-90 mm & ID-76 mm nominal)(DSR 2022 -Item no.14.16.2) 9 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.up to 35 sq.mm.Above 35 sq. mm and upto 95 sq. mm (DSR 2022 -Item no.7.5.2) 10 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25/3mm MS flat clamp) (DSR 2022 -Item no.7.7.2) 11 Supply & installation of Safety Items with First Aid Kit, short Treatment Chart, DCP Type Fire Extinguisher of 2Kgs., Rubber mat , Fire Bucket of 2nos. With Stand etc as reqd 12 Supply and Fixing of 4 pole On load Change-Over switch having Rated Current of 160A and Rated Voltage of 415V along with sheet steel enclosure on wall surface or existing panel board along with connecting existing cables to change-over switch including testing, commissioning etc., at site of work as required 13 Charges towards loading unloading of 35 KVA DG set and AMF panel as required. 14 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil(Item no2.6.1 p-91 of DSR 2023) 15 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m (Item no2.25 p-94 of DSR 2023) 16 Centering and shuttering including strutting, propping etc. and removal of form work for :(item no.5.9.1 of DSR 2023) 17 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( item no. 2.27 of DSR 2023) 18 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (4.1.8 of DSR 2023) 19 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (5.1.3 of DSR 2023 20 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Hot rolled deformed bars (5.22.4 of DSR 2023
