Tender For Renovation Of Kushappally Kulam At Thalavoor Gramma Panchayath - Renovation Of Kusappalli Kulam 2 50.2.3.1 Pumping Or Bailing Out Water And Removing Slush Etc By Using Pump Set Including Cost Of Labour, Oil Hire Charges Of Pumpset, Etc Comple, thalavoor-Kerala

Tender For Renovation Of Kushappally Kulam At Thalavoor Gramma Panchayath - RENOVATION OF KUSAPPALLI KULAM 2 50.2.3.1 Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete 3 OD866/2024-2025 DISMANTLING DR- Dismantling,clearing away and carefully stacking materials usefulfor reuse for any thickness of walls in DR masonry including disposal of debris within a distance of 150 m. 4 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 5 2.26.1. Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil 6 OD867/2024-202560.7.1. DRY RUBBLE MASONRY_ DRY rubble without concrete levelling course masonry with good quqlity blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site. 7 OD868/2024-202560.7.8DR with Departmental stone - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site 8 5.9.1Centering and shuttering including strutting, etc. and removal of formfor:Foundations, footings, bases of columns, etc for mass concrete 9 5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo Mechanically Treated bars of grade Fe-500D or more 10 5.1.2.Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 11 7.1 1Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(1 cement:6 course sand: 12graded stone aggregate 20 mm nominal size)upto plinth level with cement mortar 1:6 (1 cement:6 course sand ) 12 4.1.3.Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 13 10.26.3 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes 14 16.70.2 Providing and fixing G.I chain link fabric fencing of required width in mesh size 50x50 mm inciluding strengthening with 2mm dia wire or nuts bolts and washers as required complete as per the direction of engineer -in -charge . Made of G.I wire of dia 4mm .PVC coated to achieve outer dia .not less than 5mm in required colour and shade. 15 13.61.1 Painting with synthetic paint of approved brand and manufacture to give an even shade :Two or more coats on new works 16 16.8 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction ,of approved size ,design & shape ,laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand ,filling the joints with fine sand etc..all complete as per the direction of Engineer - in -charge 17 13.3.1 20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand) 18 4.3.1 Centering and shuttering including strutting ,propping , etc.. And removal of form work for Foundations,footings,bases for columns

INR 2000 /-

INR 25000.0 /-

INR 9.29 Lakhs /-