Tender For Providing And Fixing Hospital Accessories And Fitment At Ward No. 10 St George Hospital, Mumbai, mumbai-Maharashtra

Tender For Providing And Fixing Hospital Accessories And Fitment At Ward No. 10 St George Hospital, Mumbai=1 . Providing and Suppling APO Motorized bed having Overall dimensions: (L)2241 mm X (W)1050 mm X(H) Adjustable from 440 mm to 770 mm. Five Electric operated features are Backrest, Leg rest, High-Low, Trendelenburg, Reverse Trendelenburg(Only one handset will be Provided). Min ht: 440 mm; Max ht: 770 mm without mattress. Back rest angular movement: 65 deg Knee rest angular movement: 30 deg. Trendelenburg 13.5 degree and Reverse Trendelenburg, 13.5 degree. Safe working load should be 200 kg Patient load bearing capacity: 135 kg. All edges in contact with patient to be rounded safely. The bed has Manual CPR lever on both sides in case of emergencies. Head & Foot board should be made of blow molded Poly polypropylene. Head board and foot board should be with metal inserts to mount it on bed frame. Removable PP head board and foot board should have cut out, for better gripping. Bed frame should be made of MS ERW tube of size 50mmx25mm of 2 mm thick supported with ERW square tube with 25 mm x 25 mm and 1.2 mm thick. All comers of bed frame are Provided with bumper mounting holders and it should have Provision for iv pole holders. Base frame made of MS ERW tube of size 30mmx60mm of 2mm thick. Base frame have ground clearance of greater than 150 mm to avoid any obstruction during bed movement. Base frame have Provision to mount oxygen cylinder cage as optional accesory. It has Trendelenburg indicator guide Bed lying surface be made of PP injection mould. These lying surface has sections for bed profiling i.e. back adjustment, fixed pelvic section, upper and lower leg adjustment. Lower leg rest section is Provided with Ratchet for leg rest adjustment with a single hand operation to achieve the position. Backrest is X-Ray permeable with casette holder. Mattress platform is strengthened by frame of size 25 mm x 25 mm and 1.2 mm thick. Under bed clearance should be greater than 150 mm.4 TPE rotating bumpers of dia 92mm height 69mm with 40-50 shore hardness are Provided at four comers to protect the bed and patient from impact and avoid damages to wall. The bed is provided with 125mm dia, twin wheel plastic polymer with metal insert castors. Out of 4 castors two with brake, mounted at diagonally opposite position. The bed should be provided with PP molded side boards of 4 nos providing full coverage to bed. These side boards should be integrated with drop down mechanism for easy operation. The side boards should be provoded with angle indicators The bed has powder coated urine bag holder on both side of the bed for ease ofaccessibility.. All metal components are pretreated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating. Electrical details: Supply Voltage: 100-240VAC +/-10%; Current: 2.5A max, Electric Shock Protection: Class 1, Type B, Liquid Ingress protection IPx4, Four Electric operated features are Backrest, Leg rest, High-Low, Trendelenburg/Reverse-Trendelenburg(Only one handset will be Provisioned). The bed has Provision for front loading medium sized ms made oxygen cylinder cage as optional accessory. Thebed has provision of Telescopic IV pole made of Stainless steel to mount saline bags, the bed is designed as per following standards. IEC 60601-2-52 Medical Electrical Equipment Particular requirements for safety and essential performance of medical beds. IEC 60601-1-4 General Requirements for Safety: Programmable electrical medical systems. ISO 14971 Medical Devices: Application of risk management to medical devices, the bed has following certificates like ISO 13485:2016 Medical Devices: Quality Management Systems -Requirements for regulatory purposes, bed should have followicertificates: CE Certificate from European certifying agency with 4 digit registration code. USFDA registration ISO 13485 certificate from NABCB accredited agency and etc. completed. Providing and fising APO Mattress having Overall dimension (L)1950mm (W)853mm*(H)100 mm. The mattress is provided with 40 density 100 mm thick PU foam mattress with ridges for easy bending. It is covered by heavy helium material which is water proof, flame retardant, vapour & X-Ray permeable with Bacteriostatic properties. The zip & stitches for the mattress cover is concealed and etc. completed. Providing and fixing APO Fixed tube assembly of SS 304 tube with dia. 31.75mm and 1.6mm thickness. Heavy duty height adjustable IV pole with SS 304 make mounting on bed. It has glossy mirror finish. The maximum sale working load is 3Kg per hook for saline bag. 9KG including syringe pump 7 infusion pump, device mounted on fixed tube. Hook Arm Arm PCD Dia. 366mm and the overall height is from 855 mm to 1358min. The knob is made up of Nylon with threaded stem and etc. completed. Providing and fixing APO Oxygen Cylinder case is fitted at base frame on head side of ICU bed and Provides the safe housing to oxygen cylinder. (L)840 mm X (W)213 mm X (H) 165 mm and etc. completed. Providing and fixing APO Overall Sizes (L)464 mm X (W)137 mm X (H) 344 mm. Wire mesh made of MS rod of dia 6mm & front cover. MS sheet of thickness 0.6mm. Pre treated and powder coated with epoxy polyester powder coat and etc. completed. (Godrej make as approved by user dept.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	17-03-2025	FeesCorrigendum	Fee	20-03-2025

INR 590 /-

INR 39000.0 /-

Refer document