|
| 1 | saras mela pandhal Light, Sound and allied works. |
| 2 | Trade stallsAs per layout/Direction of district mission- Setting up and erecting up of weather proof/water proof Air Conditioned (A/C) Pandal (German Hanger, white colour) with decoration works and 5 emergency exits. The pandal should be provided with water proof/ weather proof roof covering (fixed with MS wire, coir yarn etc) and also provide wooden floor (using plywood laid 25 cm above the ground level with the support of small wooden post, with floor carpets) and the height of the pandal in centre portion is minimum 10-12 meter and side portion is minimum of 5-6 meter. The pandal roofs should have GI pipe fixed to the top for preventing movement of roof and tying with M. S. wire , coir yarn etc (All Licences from required departments, loading and unloading charges,Lighting and electrical power and all other works included) ect. complete For 13 days Note:-AC facilitiesshould betestedand providedandAC facilitiesmust be available from 10 am to 11 pmin trade fair stall areain every day of the event and propotional rate will be deducted for reducedworking hours or non working properly ). Location for the proposed structure is of beach/sea side. |
| 3 | As per layouts//Direction of district mission- Setting up and erecting up of weather proof/water proof Pandal (Hanger Pandal with GI sheet and white sealing) with decoration works covered with all units including 3 yards for fire engine, ambulance and police vehichle. Sides are covered in suitable partition.The pandals should be provided with water proof/ weather proof roof covering and the height of the pandal in center portion is minimum 4-5 meter. The pandal roofs should have GI pipe fixed to the top for preventing movement of roof and tying with M. S. wire , coir yarn etc (loading and unloading , ,Lighting. and all other works included ect. complete. For 13 days. |
| 4 | food court anf dining area-As per layout//Direction of district mission- Setting up and erecting up of weather proof/water proof pandal (German Hanger, white colour )with decoration works which will coverand Food Court area - Dining Area and cooking and display area wash area etc, and all sides are covered in suitable partition board (acrilic/mica) The pandals should be provided with water proof/ weather proof roof (fixed with MS wire, coir yarn etc) covering and also provide wooden floor, with floor carpets (excluding washing and cooking area) using plywood laid 25 cm above the ground level with the support of small wooden post, MS wire, coir yarn etc, and the height of the pandal in centre portion is minimum 10-12 meter and side portion is minimum of 5-6 meter. Decoration work is to be provided in the stage as per the direction of the officials concerned,. This pandal should have adequate sewage drainage facility and should include a sewage collection pit with sufficient size and maintaining the same, by periodically sanitizing and disinfecting the same. and disposal waste water from time to time in case the pit is full and facility to collect food waste . The pandal roofs should have GI pipe fixed to the top for preventing movement of roof and tying with M. S. wire , coir yarn etc ect. Complete (All licence from equired govt departments, loading and unloading charges and all other works including light and electricity )For 13 days. Note:- Certiain portion of the pandal should be air conditioned as per the directiom of Kudumbashree officials and the rate ofthat portion ofAir conditionedarea may be claimed as same as of item No.1.01 and. AC facilitiessholud betestedand provided andAC facilitiesmust be available from 9 am to 12 pmfor thatareain every day of the event and propotional rate will be deducted for reducedworking hours or non working properly ). |
| 5 | As per layout- Weather proof and fire proof pandal for setting up Kitchen area and pot wash area, Require a roof cover to be installed and also provide wooden floor, 15 ft. Height to the backside of the kitchen. A work area for washing large utensils should be set up near the food court. Dress changing and resting area, store room ar cover with all side with door and must have AC facility. (All license from required govt departments, loading and unloading charges and all other works including light and electricity ) |
| 6 | As per layout- office space/ front office- Setting up and erecting up of weather proof/water proof Pandal (German-Hanger with AC) and the height of the pandal in centre portion is minimum 4-5 meter.Stall will be cover with all side along with Door with lock facility The pandal roofs should have GI pipe fixed to the top for preventing movement of roof and tying with M. S. wire , coir yarn etc. provide wooden floor, with floor carpets (excluding washing and cooking area) using plywood laid 25 cm above the ground level with the support of small wooden post (loading and unloading ,. and all other works included) ect. complete |
| 7 | \"As per layout- main stage- Setting up and erecting up of weather proof/water proof Air Conditioned (A/C) Pandal (German Hanger, white colour) with decoration works and 4 emergency exits. The pandal should be provided with water proof/ weather proof roof covering (fixed with MS wire, coir yarn etc) and alsowith fresh floor carpets) and the height of the pandal in centre portion is minimum 10-12 meter and side portion is minimum of 5-6 meter. The pandal roofs should have GI pipe fixed to the top for preventing movement of roof and tying with M. S. wire , coir yarn etc (All Licences from required departments, loading and unloading charges,Lighting and electrical power and all other works included) ect. complete For 13 days Note:-AC facilitiessholud betestedand providedandAC facilitiesmust be available from 9 am to 10 pmin trade fair stall areain every day of the event and propotional rate will be deducted for reducedworking hours or non working properly ). |
| 8 | \"As per layout- Setting up and erecting up of weather proof/water proofPandal (German Hanger, white colour) with decoration works and 4 emergency exits. The pandal should be provided with water proof/ weather proof roof covering (fixed with MS wire, coir yarn etc) and also provideand the height of the pandal in centre portion is minimum 10-12 meter and side portion is minimum of 5-6 meter. The pandal roofs should have GI pipe fixed to the top for preventing movement of roof and tying with M. S. wire , coir yarn etc (All Licences from required departments, loading and unloading charges,Lighting and electrical power and all other works included) ect. complete For 13 days infront of main stage |
| 9 | \"As per layout- vvip lounge and green room- Setting up and erecting up of weather proof/water proof Air Conditioned (A/C) Pandal (German Hanger, white colour) with decoration works and 4 emergency exits. The pandal should be provided with water proof/ weather proof roof covering (fixed with MS wire, coir yarn etc) and also provide wooden floor (using plywood laid 25 cm above the ground level with the support of small wooden post, with floor carpets) and the height of the pandal in centre portion is minimum 10-12 meter and side portion is minimum of 5-6 meter. The pandal roofs should have GI pipe fixed to the top for preventing movement of roof and tying with M. S. wire , coir yarn etc (All Licences from required departments, loading and unloading charges,Lighting and electrical power and all other works included) ect. complete For 13 days Note:-AC facilitiessholud betestedand providedandAC facilitiesmust be available from 9 am to 11 pmin this areain every day of the event and propotional rate will be deducted for reducedworking hours or non working properly ).\"sea side portion of vip room shall be covered with transperent side wall fabric. |
| 10 | Construction of theme based floodlit gates on German hangar entry( as per theme designed and approve by the Kudumbashree District mission) |
| 11 | Setting up 7 individual stall in front office space.(as per drawing/layout) inside the main pandhal(german hanger. A/C). Stall will be cover with all side along with Door with lock facility.Each stall having minimum area and requirement:• One Main office with power plug with 3 pins - . , should be furnished with 2 table and 10 numbers of chairs(armless), 1 Almirah with safe locker facility should be electrified with power plug with 3 pins, 1 numbers of fluorescent tube• CCTV room- should be furnished with 2 table and 2 numbers of chairs(armless), should be electrified with power plug with 3 pins, 1 numbers of fluorescent tube, CCTV monitors and Storage.• One Reception room - , should be furnished with 2 table with locker and 5 numbers of chairs(armless), should be electrified with power plug with 3 pins, 1 numbers of fluorescent tube• One Medical room -, should be furnished with 1 table and 5 numbers of chairs(armless), 2 cot should be electrified with power plug with 3 pins, 1 numbers of fluorescent tube• OneMedia room - , shall be electrified with power plug with 5 pins, 1 numbers of fluorescent tube• One Finance office with power plug with 3 pins - . , should be furnished with 2 table and 10 numbers of chairs(armless), 1 Almirah with safe locker facility should be electrified with power plug with 3 pins, 1 numbers of fluorescent tube |
| 12 | Straight panel behind the food stalls inside Food court |
| 13 | Almirah with safe locker facility – 2 numbers inside Food court |
| 14 | Round dining tables with cloths cover over the tables in dining area (4 ft radius) inside Food court |
| 15 | Square table with drawers with cloths cover over the tables for billing counter food stalls |
| 16 | Kitchen sinks (2*2 ft.) with water taps with necessary plumbing and drainage arrangements. for Food court |
| 17 | Supplying with Pot wash area sink with water taps with necessary plumbing and drainage arrangements (sink specification - 3*3 ft.) inside Food court |
| 18 | (as per drawing/layout) inside the main pandhal(german hanger. A/C). Setting upand erecting 300 octonorm exhibition stall of size 3m*3m or nearest size using good quality hylum sheet with aliminium standard frame individual stalls/cubicles, face to face or back to back as per lay out or direction of District Mission. -with Passages of 20 feet wide in between face-to-face stalls .Each stall/cubicle should be furnished with 2 tables with cloth frills and 2 numbers of chairs(armless) and should be electrified with 1 numbers of fluorescent tube, 1 number of a plug.The stalls should be provided with boards for providing stall numbers and stall names or unit names |
| 19 | Setting up water proof/weather proof Bio toilet/latrines furnished with buckets, jugs, and maintaining the same, by periodically sanitizing and disinfecting the same (Including removal, treatment and disposal of faecal sludge whenever necessary) and supplying with continuous water supply and readymade septic tank facility, at the venue in consultation with officials concerned. (15 ladies toilets and 10 gents toilet) 1.5M*1.2M( number of total toilet is 25 Nos). septic waste has to be removed on daily basis or in the case of out of capacity. |
| 20 | Setting up water proof/weather proof Bio toilet/latrines furnished with buckets, jugs, and maintaining the same, by periodically sanitizing and disinfecting the same (Including removal, treatment and disposal of faucal sludge whenever necessary) and supplying with continuous water supply and separate readymade septic tank facility at the venue in VIP Lounge area.septic waste has to be removed on daily basis or in the case of out of capacity.1.5M*1.2M ( total toilet 4 nos) |
| 21 | \"As per layout- main stage- Setting up and erecting up of weather proof/water proof Air Conditioned (A/C) Pandal (German Hanger, white colour) with decoration works and 4 emergency exits. The pandal should be provided with water proof/ weather proof roof covering (fixed with MS wire, coir yarn etc) and alsowith fresh floor carpets) and the height of the pandal in centre portion is minimum 10-12 meter and side portion is minimum of 5-6 meter. The pandal roofs should have GI pipe fixed to the top for preventing movement of roof and tying with M. S. wire , coir yarn etc (All Licences from required departments, loading and unloading charges,Lighting and electrical power and all other works included) ect. complete For 13 days. |
| 22 | Providing (loading and unloading included) and layingclothes overfoldable tables at food court |
| 23 | Providing (loading and unloading included) and laying of chairs with arms |
| 24 | Providing (loading and unloading included) and laying of chairs Without arms |
| 25 | Providing (loading and unloading included)and laying of Chair cover with bow (to be replaced with washed clothes every 3 days) |
| 26 | Drinking water coolers (5 no\"s) inside food court area for the guests(to be placed at 2 different places) |
| 27 | Supplying (loading and unloading included) and erecting of 8 Syntex water tanks of 5000 liters with a total capacity 40000 erected on strong stands and necessary plumbing arrangements for setting up with continuous water supply to and from the water tanks to the kitchen/food court and toilets separately, and wherever necessary(total 8 tank of 5000 liter capacity) |
| 28 | Supplying (loading and unloading included) and erecting of 5 Syntex water tanks of 5000 literswith a total capacity of 25000 liters of water with motor and necessary plumbing arrangements at ground level near the raised syntex tank for continuous water supply(total 5 tank of 5000 liter capacity) |
| 29 | Providing and fixing plumbing lines of 25 mm pvc pipes to kitchen, food court , toilet, etc (as per requirement by District Mission) |
| 30 | 560000 liters of clean water per day should be made available every day |
| 31 | Supplying (loading and unloading included) and erecting of hand wash basins of 10 numbers of taps on strong stands and providing the same with continuous water supply for washing and necessary drainage of the used water |
| 32 | Supplying with water taps with necessary plumbing and drainage arrangements |
| 33 | Providing (loading and unloading included) and laying of executive chairs with arms and cushions and seat covering for vip room and stages. |
| 34 | Providing (loading and unloading included) and laying of executive glass tables or teepoys for stage area and vip room |
| 35 | Providing (loading and unloading included)and laying of wooden dias/podium (with branding as per the instructions from District Mission ) for stage area. |
| 36 | Providing (loading and unloading included)and laying of Vilakku (4 feet lamp)For stage area. |
| 37 | Setting up and erecting up of Stages (as per lay out and direction of District Mission) with carpet and stage backdrop (LED wall 40 X 10 feet 1 nos and 20 X 08 feet( 1 nos), and 10x8 (2nos)setting as per the direction of officials concerned. |
| 38 | Stage Decoration with fresh flowers as per direction of District Mission on the day of inauguration ceremony and closing ceremony. |
| 39 | Deferent color Dunglas |
| 40 | Setting up and erecting up of an Entrance Archwith art work - specially designed Art Work as per the direction of District Mission (with materials such as wood, hard board, bamboo, cloth etc - (50 M long wall and Arch) along the main Road, as per the direction of officials concerned12.40 Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundationcomplete as per Drawing and Technical Specifications or instruction. |
| 41 | Designed Art Work as per the direction of District Mission (with materials such as wood, hard board, bamboo, cloth etc - (25 M long wall and Arch) (Inside the main entrance and wall) as per the direction of officials concerned. |
| 42 | Meadia Platform in front of stage to record the programmers |
| 43 | Provide required no. of jute fixed metal frames. 7x2 feet withadequate support system to fix the same for making each food display counter. (as per Direction of district mission) |
| 44 | Provide required no. of jute fixed metal frames. 8x2.5 feet in each food display counter.(as per Direction of district mission) |
| 45 | Provide required no. of jute fixed metal frames. 10x3 feet with adequate support system to fix the same for making each food display counter.(as per Direction of district mission) |
| 46 | Stall name boards of size 3M x0.30 ornearest |
| 47 | Stall name boards of size 3.5M x 0.35 ornearest |
| 48 | Direction boards of size 1.0m x0.50m |
| 49 | Office name boards of size 0.6M x 0.3 M |
| 50 | Barricade ( as per the direction from District Mission) |
| 51 | kitchen area: providing waste bin for food waste (green ) - 25 waste bins with 100 liters capacity , waste bins for plastic waste (red) - 10waste bins with 50ltrs capacity, waste bin for paper waste (yellow) - 10 waste bins with 50 liters capacity |
| 52 | dining area: providing waste bin for food waste (green) - 10 waste bins with 100 liters capacity , waste bins for plastic waste (red) - 10 waste bins with 100 liters capacity , waste bin for paper waste (yellow) - 10 waste bins with 100 liters capacity |
| 53 | providing bio degradable garbage bags (one packets having 50pieces) |
| 54 | Garbage cleaning & collection van (3times a day) with manpower. Waste disposal should be done as per the municipality norms by the concerned agency |
| 55 | providing multipurpose trolley |
| 56 | Security (10 nos day and 8 night) for 13 days |
| 57 | providing of fire extinguishers in exhibition area ABC type cylinders with sand buckets (CO2 water and powder mix with refilling dates) sufficient equipment’s to be placed at various locations as per directions of fire department |
| 58 | facility to remove /suck rainwater from ground and pandal, if necessary with electric motor |
| 59 | labor charges for re-instating the ground (as per the direction of District Mission) |
| 60 | 30 arabian tent 20x20 feet with cover 3 side and also provide wooden floor, and 10gastro restaurant dining umbrellas |
| 61 | Canopy for billing counters in food court ( 2x2 M) |
| 62 | Clearance /License to be obtained from PWD, Electrical Inspectorate and Fire and rescue Department, municipal corporation , police and any other Department, as required, by the Contractor/Tenderer |
| 63 | Providing and fixing vinyl cloth print as per the direction of as per the direction of District Mission |
| 64 | Providing and fixing Teflon Sheet as per the direction ofs per the direction of District Mission |
| 65 | Engaging man mazdoor for dismatling existing sheet fensing across the graound and reinstating the same after the event . |
| 66 | Hiring plastic hose of 20 mtr long having thickness minimum of 2mm with adapter to connect to the tapping point for drawing water with 20mm lever valve for connecting hose |
| 67 | Hire charges for providing ornamental curtain (single layer) using good quality approved curtain material fitted with ornamental frills, louvers including all charges of labour for fixing, material etc complete as per the direction of site engineer in charge for 13 days. |
| 68 | Setting up and erecting theme based installation at the food court including all electrical and illumination works & dismantling after the event. |
| 69 | Providing and fixing hordings of Stage programmes and other kudumba shree advetisement and varities food dishe out side the venue from entrance to sides covering of the stadium |
| 70 | Printing and sitcking and displaying ( ACP bord and venyl printing ) pictures of milestones of Kudumbashree and its various programmes on the back sides of stallas in pathways |
| 71 | Hire and labour charges for steel work in built up GI tubular(round, square or rectangular hollow tubes etc.) trusses for Box arch of Kerala chicken etc Printing and sitcking and displaying in food court and pat ways |
| 72 | Setting up white board, each day replacable flex prints and marker for writing the suggestion and complaints. Message board at Food court of 4x3 ft. |
| 73 | Hiring, providing and placing with required number of water weight for supporting the wooden platform and German hanger structure and to ensure the structural stability and safety. |
| 74 | Rising the height of wooden platform of the food court, as mentioned area in the extra item No.1 by welding steel ‘C’ Channels and steel square tube placed with the support of cement solid bricks for levelling the platform with other portion of the food court as specified (25 cm above the ground level) |
| 75 | Hiring of carpet for the entrance portion of the structure |
| 76 | Inside the food court area (german hanger), setting up and erecting VIPLounge of size 4mx6m or nearest size using good quality hylum sheet with aluminium standard frame individual stalls/cubicles, face to face or back to back as per layout or direction of District Mission |
| 77 | Setting up and erecting Labours Resting Room of 6mx6m or nearest size using good quality hylum sheet with aluminium standard frame individual stalls/cubicles, face to face or back to back as per layout or direction of District Mission. Labour Resting Room - 6mx6m Pagoda with platform, (13 days) |
| 78 | Hire charges for supplying and arranging the queue manager barrier including all labour etc for a period of 13 days as per the direction of engineer in charge |
| 79 | Hire and labour charges for Feeding Room - 6mx6m pagoda with platform, carpet and octonorm panelling for event days (13 days) |
| 80 | Hire charges for supplying and arranging double seated sofa for 13 days |
| 81 | Hire charges for supplying and arranging single seated sofa for 13 days |
| 82 | Hiring and providing mattress set and other furniture and facilities for one unit for fireforce and medical aid |
| 83 | Hire charges for supplying and arranging system table for counter points, for 13 days |
| 84 | Hire charges for supplying and arranging including all plumbing work for washbasin at VIP room |
| 85 | Providing (loading and unloading included) and laying of cocktail tables at food court |
| 86 | Providing (loading and unloading included) and laying of centre tables at food court and VIP area |
| 87 | Hire and labour charges for all days for box type platform of steel hollow tube (rectangular, round or square) with 18mm marine plywood on the top to place the Cameras with all support upto an appropriate height and including cost of all labour charges for fixing, dismantling charges, |
| 88 | Providing water dispensers and 20 litre water cans for delivering towards food court area and stall area on all event days. Transportation, loading and unloading included |
| 89 | Hire charges for supplying and arranging required number of VIP chairs for stage on seminar. Loading and unloading, transportation included. (2 times) |
| 90 | Supplying and providing cold fire works for celebrations |
| 91 | Stage Decoration with fresh flowers as per direction of District Mission on the day of closing ceremony and seminar days (2 times) |
| 92 | Hire and labour charges for steel work in built up GI tubular (round, square or rectangular hollow tubes etc.) trusses etc. Including cutting, hoisting, fixing in position and applying a primer coat of approved steel primer, including welding and bolted with special shaped washers etc. complete for displaying various art and culture form at exterior of venue and with varieties of dishes, programme details etc., as per the direction of the District Mission |
| 93 | Providing Medicine rack for medical committee, as suggested by District Mission |
| 94 | provide wooden floor (using plywood laid 25 cm above the ground level with the support of metal jacky |
| 95 | entire structure and products in the trade stalls have to be insured with insured value of 2 crore. All damages arising out of the flaws and damage in structure and natural calamity, fire etcshall be covered |
| 96 | Hire and labour charges for providing of ceiling fans of 1200 /1400 mm with suitable and safe wiring as per IS specifications and standards to stage, canteen, etc (where ever necessary) and giving connection withELCB |
| 97 | Hire and labour charges for providing of Pedestal fans with suitable and safe wiring as per IS specifications and standards to stage, canteen, etcand giving connection |
| 98 | sky beam light |
| 99 | Hire and labour charges for providing 1200 mm patties single LED tube fitting with 40 W in position and connection as required as per IS specifications with suitable and insulated wiring to all stalls, offices, stage,canteen, open spaces, inside pandal etc. |
| 100 | Providing and fixing of 85 W LED lamps or equivalent as per ISspecifications with suitable and insulated wiring. |
| 101 | Hire and labour charges for erecting and fixing of 400 WATT LED FLOOD LIGHT with GI and Light firmly on ground with of 6 meters height aboveground level at suitable intervals. |
| 102 | Hire and labour charges for providing and fixing of LED lamps of 100W asper IS specifications with suitable and safe wiring. |
| 103 | Hire and labour charges for providing and fixing of LED lamps of 200W asper IS specifications with suitable and safe wiring. |
| 104 | Distribution box with ELR,MCB,&ELCB |
| 105 | LED FLOOD LIGHT (RGB)illuminate venue |
| 106 | LED PIXEL LIGHT & NEON STRIP LIGHT |
| 107 | Hire and labour charges for providing and fixing of LED decorative/illumination lights of strips with minimum 40 bulbs in eachstrip as per IS specifications with suitable and safe wiring . |
| 108 | Hire and labour charges for providing DG set (Diesel Generator) of required capacity with stand by and with operator for the complete period of operation with fuel in to the entire area and for providing power toall power consumptions units/utilities/instruments and machines etc except AC for tradefair stall area. working the entier mela area (Note : Required sets of Generator with allied accessaries having suitable capacities are included) |
| 109 | Hire and labor charges for providing 15A plug point and giving connection with safe wiring and insulation as per Is standards and specifications asrequired. |
| 110 | Hire and labour charges for providing 5A plug point and giving connection with safe wiring and insulation as per Is standards and specifications asrequired |
| 111 | Hire and labour charges for providing 250 A main board with supply , 100 A outgoings HRC, MCB, fuses , change over facility with suitable size angle iron frame work and giving necessary connection to generator and KSEBsupplies and earthling as per IS specifications and standards. |
| 112 | Hire and labour charges for providing ordinary type pipe earthings sufficient as per IS specifications and standards and giving connectionsetc. as required. |
| 113 | Adequate general LED lighting inside the food court hanger (natural whiteLED light |
| 114 | a providing and fixing of 85 W LED lamps or equivalent as per IS specifications with suitable and insulated wiring as per the directionkitchen area |
| 115 | Providing and fixing exhaust fans in cooking area as per IS specifications with suitable and safe wiring |
| 116 | Hire and labour charges for providing vehicle mounted 250 KVA Diesel Generator set including posting of operator staff for stand by for all daysincluding operator and fuel |
| 117 | Providing of coolers at food court dining rooms and required places suggested byauthorities, with electrical supply and installation (150 Ltr ice and water) |
| 118 | DG 500 KVA(DG With Deisel & Labour charge /13hr running) |
| 119 | DG 250 KVA(DG With Deisel & Labour charge /13hr running) |
| 120 | DG 125 KVA(DG With Deisel & Labour charge /16hr running) |
| 121 | DG 82 KVA(DG With Deisel & Labour charge /13hr running) |
| 122 | DG 62 KVA (DG With Deisel & Labour charge /13hr running) |
| 123 | Moving Beam (7R, 10R, 15R) |
| 124 | Moving Head/Wash (MR 700) |
| 125 | Moving Led (RGBW) |
| 126 | Moving Wash (B-EYE) |
| 127 | LED Wall Wash (RGBWA, 2ft, 4ft) |
| 128 | COB LED (200W) |
| 129 | Warm LED Can |
| 130 | LED Can (120, RGB, IP65) |
| 131 | Profile Spot (750W with Iris & Shutter) |
| 132 | LED Zoom Profile (750W with Iris & Shutter) |
| 133 | Fresnel Spot (1000W with Barn Door) |
| 134 | PC Spot (1000W) |
| 135 | Pin Spot (warm) |
| 136 | LED Blinder (2 Way, 4 Way) |
| 137 | Blinder (2 Way, 4 Way) |
| 138 | PAR CAN (cp 60, cp 61, cp 62) |
| 139 | Dimmer Pack (2KW/DMX) |
| 140 | Follow Spot (LDR, CANDO2500) |
| 141 | Smoke Machine |
| 142 | Haze Machine |
| 143 | Fazer Machine |
| 144 | Fog Machine |
| 145 | DMX Desk Console |
| 146 | DMX Digital Light Console |
| 147 | Avolites Control Desk (Pearl 2010) |
| 148 | Avolites Tiger touch 2 console |
| 149 | Grand MA 2 console |
| 150 | Ultraviolet Tubes (UV 4ft) |
| 151 | Lighting Truss Pieces (Designed Type ) |
| 152 | T Tower Lighting Truss (13 ft/17 ft) |
| 153 | Lighting Truss (Goalpost, 40/20) |
| 154 | Hanging lighting Truss (Designed type) |
| 155 | Lighting Truss (box type 60,40,20) |
| 156 | Laser Light as per IS specifications with suitable and safe wiring and stand |
| 157 | Digital Console (S6L) |
| 158 | 48 ChannelDigital Console (SC48) |
| 159 | 32 ChannelDigital Console (BEHRINGER/MIDAS M32/wing 48) |
| 160 | Digico SD Series(SD9,10,12) |
| 161 | DigicoQuantum Series(225,338) |
| 162 | Allen n heath(D live) |
| 163 | 32 ChannelAnalogue Console |
| 164 | 24 ChannelAnalogue Console |
| 165 | Speaker Management System (XTA/DBX360) |
| 166 | StageGear for Musicians(Back Line - Regular) |
| 167 | Twin Reverb (Guitar AMP) |
| 168 | Bass Amp Speaker |
| 169 | KEYBOARDS AMP |
| 170 | Speaker system -Top (D&B/ADAMS/RCF HDL30/EV) |
| 171 | Speaker system -Sub (D&B/ADAMS/RCF HDL30&50/EV) |
| 172 | Pole Mounted Sub & Tops |
| 173 | Normal power Amplification (CROWN XTI 6002) |
| 174 | 31 Band Graphic Equalizer (DBX/CLARKE/BSS) |
| 175 | Delay Effects Unit (YAMAHA/ROLLAND/ALESS) |
| 176 | Reverb Effects unit (LEXICON/YAMAHA) |
| 177 | WirelessI E Monitor (SHURE/SENNHEISER) |
| 178 | Side Fills (RCF/EV/JBL) |
| 179 | Handled Wireless Mic (NORMAL) |
| 180 | WIRELESS CLIP ON MIC (SHURE) |
| 181 | WIRELESS HEAD WORN MIC (SHURE) |
| 182 | DRAMA MIC HANGING (SHURE OR AUDIO TECHNICA) |
| 183 | REGULAR MIC WITH STAND AND CABLE (SHURE OR SENHISER) |
| 184 | PODIUM MIC (DPA OR SENHISER OR SHURE) |
| 185 | CONTACT INSTRUMENT MIC |
| 186 | DRUM KIT MIC (AUDIX OR SENHISER) |
| 187 | SNAKE CABLE (SUNRISE OR KLOTZ) |
| 188 | DI BOX - RADIAL OR BSS |
| 189 | POWER AMPLIFICATION / GROUND STACK |
| 190 | AUDIO SPLITTER (FOR REC AUDIO) |
| 191 | FENDER TWIN REVERB |
| 192 | T TRUSS FOR LINE ARRAY |
| 193 | STAGE MONITOR (RCF-YAMAHA-EV) |
| 194 | Handled Wireless Mic (SHURE OR SENHISER) |
| 195 | PROVIDING AND FIXING OF PA SYSTEM WITH CORDL;ESS MICROPHONE INSIDE THE STALL, PANDHAL WITH PROPER EARTHING AS PER IS SPECIFICATION AND STANDARDS |
| 196 | PROVIDING AND FIXING OF PA SYSTEM WITH CORDLESS MICROPHONE INSIDE THE FOOD COURT |
| 197 | PROVIDING ANF FIXING OF PA SYSTEM WITH CORDLESS MICROPHONE INSIDE THE SEMINAL STAGE WITH 20000 WATTS , VOICE MONITOR -2, |
| 198 | GEGENERAL ANNOUNCEMENT IN PROGRAM AREA |
| 199 | WALKIE TALKIE 20 SET- having atleast 1 km signal |
| 200 | CCTV CAMERA with high resolutionwith provision for sufficient storage and back up of 13 days visual. |
