Tender For Supply & Errection Of Street Light Pole With Fixing Of Street Light - Supply & Fixing Of 9 Mtr Gi Octagonal Pole Of Approved Make (Top Dia 70Mm, Bottom Dia 155 Mm And Base Plate 12Mm Thik) Having 3Mm Thikness With Single Arm Bracket (1 Mtr Leng, Hathras-Uttar Pradesh

Tender For Supply & Errection of street light pole with fixing of street light - Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 2 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.16 sq. mm 2 core 3 fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. 4 S&F of 63 Amp. DP MCB 5 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. 6 Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. 7 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 2 core 8 Supply and laying of 50mm dia heavy guage 14 SWG (2 mm thick) rigid steel conduit complete with bend and other acessories as required and 14 SWG fish steel wire etc. in slab alongwith reinforcement before concreting, and plastering etc,complete in all respect 9 S/F of 50mm dia B class G.I pipe 10 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 11 S&F of 63 Amp. four pole change over switch on a angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work 12 Dismentling existing C.Conc Road & Interloking road. i/c all comp. of work 13 Laying &compacting dry O.B.B 40cm gauge in foundation in layer. Thickness including local sand. 14 laying oldinterloking labour rate only 15 Supply of 90 W LED Street light Fitting havingdie cast aluminium body and diffuser with driver setsuitable for 75 to 90 Watt. Confirming to IP 66 andabove Protection complete in all respect. CAT- AAA, with LM 79-08 & LM 80-08 report of NABL, 5 years replacement guarantee/ warranty, BIS certificate & AAA catagary certified by pwd.as per pwd schedule no. -1423 16 Supply of 150 W LED Street light Fitting havingdie cast aluminium body and diffuser with driver setsuitable for 75 to 90 Watt. Confirming to IP 66 andabove Protection complete in all respect. CAT- AAA, with LM 79-08 & LM 80-08 report of NABL, 5 years replacement guarantee/ warranty, BIS certificate & AAA catagary certified by pwd 17 Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect 18 Supply and Laying of 80mm thick precast cement concrete i- shaper pavers block Vibratour Madewith top layer of minimum 8mm thickness ,smooth high gloss ginish , skid reditant ,compressive strength shall not be less than 30mpa and weight 5kg , with i/c joints filling with local sand i/c supply of all materials labour and T&P Proper Completion of Work. 19 GST 18 %

INR 3658 /-

INR 310000.0 /-

Refer document