Tender For Purchase of equipment for sports and physical fitness increased - Surfing Board:- Providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly.The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 1. (The cement concrete and excavation work shall be paid separately).3 CROSS TRAINER -Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Widux1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.1. pipe minimum of 80N C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The footrests shall be made of size not less than 130mmX5mm thick. High tensile steel. and bolts shall be used for assembly.[3:32 pm, 25/02/2022] Prasoon: used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete the directions of Engineer-in-charge to fullfill. (The cement concrete and excavation work shall be paid separately).4 THAI-CHISPINNER (2 WHEEL):-Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mm (Height), to increase mobility of shoulder -elbow and hip-knee. The main structure frame shall be made from G.1. pipe minimum of 80NB C class welded with M.S. round base plate at least Ø250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done with pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 3. (The cement concrete and excavation work shall be paid separately).5 Seated Puller Providing and fixing of Seated Puller of size not less than 1900mm (Length) x 740mm (Width) x 1920mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. The main structure frame shall be made from G.1. pipe minimum of 80NB C class welded with MS. round base plate at least 250 mm & 10mm thick. The handle frame shall be minimum of 32NB C class GL. pipe. The seat frame minimum of 32NB C class G.1. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The cement concrete and excavation work shall be paid separately)6 LEG PRESS Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.l. pipe minimum of 80NB C class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to completel the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5. (The cement concrete and excavation work shall be paid separately).7 DOUBLE STANDING TWISTER Providing and fixing of Double Twister Standing of size not less than 1500mm (Length) x 600mm (Width) x 1300mm. (Height), to enhance flexibility of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame is minimum of 25NB shall be made from C class G.L. pipe. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 0300mm and 10mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 9. (The cement concrete and excavation work shall be paid separately)8 SIT UP BOARD DOUBLE Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from C class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately).9 CHEST PRESS Providing and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 250 mm & 10mm thick. The handle frame shall be made up from at least 32NB C class G.I. pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S. Sheet of size not less than 330mm Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately).10 POMMEL HORSE Providing and fixing of Pommel Horse of size not less than 2150mm (Length) x 800mm (Width) x 800mm. (Height), to enhance the flexibility of lower limbs, waist and abdomen. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame be minimum of 32NB shall be made from C Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 8. (The cement concrete and excavation work shall be paid separately).11 CHEST CUM SHOULDER PRESSProviding and fixing of Chest Press Cum Seated Puller of size not less than 2000mm Length) x 710mm (Width) x 2200mm (Height), to enhance the strength of upper limbs and the muscles in chest and shoulder. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S. Sheet of size 330 mm Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts& bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 11. (The cement concrete and excavation work shall be paid separately).12 PUSH UP BARS - Providing and fixing of Push Up Bars of size not less than 1220mm (Length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame minimum of 25 NB shall be made from C Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately).13 FOR SEATER MRG Providing and fixing of For Seater MRG swingof size 4/5 Feet (Diameter), 3 Feet (Height) fabricated with a Center Pipe/ Frame of50NBshall be made from “C” Class G.I. pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, color (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately).14 CIRCULAR SWING FOUR SEATERProviding and fixing ofCIRCULAR SWING FOUR SEATER of size 6.0 X 5.25 Pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 65 NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, color (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately).15 HORSE / DUCK / RABET SPRINGRIDER Providing and fixing ofHORSE SPRINGRIDER of size 3.0 X 2.5 Feet fabricated with a Center Pipe/ Frame of40NB shall be made from “C” Class G.I. material andFRP Material The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 40NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, color (of metal, seat and pedal), and fixing of equipment etc. (The16 FOUR SEATER SEE SAW Providing and fixing of FOUR SEATER SEE SAWof size 5.5 X 6.25 material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately)17 In earth filling work, making a mine on the side of the road and lifting the soil 1.5 meter and carrying it upto 50 meters, breaking the lumps and laying it in 25 cm layers and pressing and leveling it and making a camber. 134 A18 In earthwork, digging a pit on the side of the road and lifting the soil 1.5 m and taking it upto 50 m, breaking the lumps and laying it in 25 cm layers and pressing and leveling and making camber. 134 A19 Laying cement concrete for road foundation and running needle and surface vibrating machine and mixing broken ballast with 40 mm crusher, preparing it in desired grade, camber and super elevation. 141 A20 Under edge block of 80 mm thickness, cement concrete made of 1:1.5:3 or stone block whose thickness will be 20 cm, height 40 cm and the top edge of the block will be rounded. In place of block, a block of same size made on the spot will also be acceptable. In case edge block is not laid on the spot, 0.08 cubic meter per running meter will be required. There should be a deduction in the rate of cement concrete. 146 B
