Tender For Regarding Running Contract For Various Works Under Full Deposit Scheme Under Electricity Distribution Section-I, Bareilly - The Work Of Safe Carriage Of The Following Material From Cb Ganj Store Center To Work Siteunder The Jurisdiction Of Edd-, Bareilly-Uttar Pradesh

Tender For Regarding running contract for various works under full deposit scheme under Electricity Distribution Section-I, Bareilly - The work of safe carriage of the following material from CB Ganj store center to work siteunder the jurisdiction of EDD-I, Bareilly. Approx. distance upto 80 Km. Including safe loading and unloading. 2 PCC Pole 8.5 meter long. 3 STP 9 Mtr Long 4 STP 11 Mtr Long 5 11 KV Incoming Panel (VCB) 6 11 KV Outgoing Panel (VCB) 7 LT Cable1x240 sq mm 8 LT Cable1x400 sq mm 9 Line material i.e., cross arm/ conductor/ pin insulator/stay/earthing rod/Disc Fitting/Disc Insulators/11 KV XLPE Cable etc 10 11/0.4 KV 1 Phase 10/16 KVA T/F 11 11/0.4 KV 3 Phase 25 KVA T/F 12 11/0.4 KV 3 Phase 63 KVA T/F 13 11/0.4 KV 3 Phase 100 KVA T/F 14 11/0.4 KV 3 Phase 250 KVA T/F 15 11/0.4 KV 3 Phase 400 KVA T/F 16 11 KV Pilfer proof Metering cubical and CT PT Unit 17 33 KV Pilfer proof Metering cubical and CT PT Unit 18 Erection of new PCC Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms 19 PCC Pole 8.5 Mtr Long Single Pole 20 PCC Pole 8.5 Mtr Long Double Pole 21 ST Pole 9 Mtr Long Single Pole. 22 ST Pole 9 Mtr Long Double Pole. 23 ST Pole 11 Mtr Long Single Pole. 24 ST Pole 11 Mtr Long Double Pole. 25 Grouting with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms 26 PCC Pole 8.5 Mtr Long Single Pole 27 PCC Pole 8.5 Mtr Long Double Pole 28 ST Pole 9 Mtr Long Single Pole. 29 ST Pole 9 Mtr Long Double Pole. 30 ST Pole 11 Mtr Long Single Pole. 31 ST Pole 11 Mtr Long Double Pole. 32 The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms 33 Erection/Installation of following new panel (VCB) in control room including grouting of Anchor bolt of Panel and making/repairing of pocket for cable to insert in panel from trench and fixing, taping of bus bar with wiring for PT. AC, DC connection including providing of AC & DC Supply. 34 11 KV Incoming Panel (VCB) 35 11 KV Outgoing Panel (VCB) 36 Providing cutting, fixing and welding of MS Strip from existing, earthing to new 11 KV VCB Complete in all respect, all material shall be arranged by the Contractor. 37 Dismantling of Old and damaged conductor complete in all respect 38 Dismantling of PCC/ST Pole due to line shifting/damaged complete in all respect 39 Dismantling of Existing Distribution Transformer for increasing capacity/Shifting complete in all respect 40 11/0.4 KV 3 Phase 25 KVA T/F 41 11/0.4 KV 3 Phase 63 KVA T/F 42 11/0.4 KV 3 Phase 100 KVA T/F 43 11/0.4 KV 3 Phase 250 KVA T/F 44 11/0.4 KV 3 Phase 400 KVA T/F 45 Laying, Stringing & Sagging of Following Conductor complete in all respect 46 ACSR Weasal Conductor 47 ACSR Rabbit Conductor 48 ACSR Dog Conductor 49 3 Phase Arial Bunched Conductor 50 1 Phase Arial Bunched Conductor 51 LT Cable1x240 sq mm 52 LT Cable1x400 sq mm 53 After Mounting of CT PT unit on double pole, laying of 50 Mtr 11 KV 3cx70 sq mm cable in single circuit on river sand formDouble Pole to metering room complete in all respect. Alongwith filling of 04 nos cable jointing kits 54 After Mounting of CT PT unit on double pole, laying of 50 Mtr 33 KV 3cx120 sq mm cable in single circuit on river sand formDouble Pole to metering room complete in all respect. Alongwith filling of 04 nos cable jointing kits 55 Under ground laying of Following cable in Single circuit on river sand to Double pole situated at both sides of road complete in all respect. Minimum depth should be 0.75 Mtr and cable should be covered by bricks from three sides. Alongwith filling of 04 nos cable jointing kits 56 11 KV XLPE Cable Size 3x70 sqmm 57 11 KV XLPE Cable Size 3x120 sqmm 58 11 KV XLPE Cable Size 3x185 sqmm 59 33 KV XLPE Cable Size 3x120 sqmm 60 33 KV XLPE Cable Size 3x185 sqmm 61 33 KV XLPE Cable Size 3x300 sqmm 62 Under ground laying of Following cable in Single circuit by drill method to Double pole situated at both sides of NH/SH/Railway Crossing complete in all respect.Alongwith filling of 04 nos cable jointing kits 63 11 KV XLPE Cable Size 3x70 sqmm 64 11 KV XLPE Cable Size 3x120 sqmm 65 11 KV XLPE Cable Size 3x185 sqmm 66 33 KV XLPE Cable Size 3x120 sqmm 67 33 KV XLPE Cable Size 3x185 sqmm 68 33 KV XLPE Cable Size 3x300 sqmm 69 Hoisting of Following size 11 KV & 33 KV XLPE Cableon double pole with GI pipe of size 6 dia 4 Mtr long including the jumpering complete with clamps , nut and bolts. 70 11 KV XLPE Cable Size 3x70 sqmm 71 11 KV XLPE Cable Size 3x120 sqmm 72 11 KV XLPE Cable Size 3x185 sqmm 73 33 KV XLPE Cable Size 3x120 sqmm 74 33 KV XLPE Cable Size 3x185 sqmm 75 33 KV XLPE Cable Size 3x300 sqmm 76 Supply & Laying of 6 dia G Pipe at various places i.e road crossing & Hoisting etc. complete in all respect ((ISO certified GI pipe 150 NB 3 mm thick dia 6 would be Provided by contractor at his own cost) 77 Construction of T/F plinth 1.5x1.5x2 m3 for mounting 250/400 KVA T/F including foundation work (below ground 0.5 M), Brick work, RCC slab of 4” thickness and plastering in 1:6 ratio with 02 Nos channel pieces of 1.5 mtr long of size 100x50x6 mm compete in all respect All manpower, material and T&P provided by the contractor to complete the work. 78 Cage fencing of 250/400 KVA Plinth mounted transformer in Town areas to avoid electrical human/cattle accidents by fabrication of cage (1 Inch Sq wiremesh) made of 10 No gauge in suitable size angle iron frame of size 7.5(L)x5(W)x8’(H) by strengthening of wire mesh 20x3 mm M.S. flat horizontally as well as vertically, Grouting the panel with 1:2:4 cement/coorse send/brick ballast. The Frame should be bolted on angles at the four corners so that frame may be un-bolted/bolted at the time of replacement of the transformer. Provision of 1 gate should be there for maintenance of the transformer. Painting (1 coat of red oxide + 2 coat of Bus green enamel paint). The wire mesh should be earthed with 50x6 mm MS earthing strip with existing earthing of Transformer Body. All manpower, material and T&P provided by the contractor to complete the fabrication, transportation and installation. 79 Pipe Earthing of Transformer (By boring of 4 inch diameter 20 m deep, 40 mm diameter A class GI pipe is inserted to a depth of 20 m and a holed pipe of 1.5 m length is inserted at the bottom. Tighten one end of the MS strip of size 50x6mm with the nut bolt with the neutral of the converter and weld the other end with the GI pipe inserted in the boring for earthing. Putting a socket on the upper part of the pipe (mouth) so that water can be poured into it to retain moisture.To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite.Above work will be carried out under supervision of concerned JE/SDO/EE) 80 The work of digging of pits, erection of Stay Clamp, Insulator etc. 81 Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms. 82 Installation of 11 KV Pilfer Proof Metering Cubicle in metering room complete in all respect 83 Installation of 33 KV Pilfer Proof Metering Cubicle in metering room complete in all respect 84 Mounting of Following Capacity Transformers as per norms complete in all respect - 85 10/16 KVA T/F 86 25 KVA T/F 87 63 KVA T/F 88 100 KVA T/F 89 250 KVA T/F 90 400 KVA T/F 91 Fixing of Distribution Box complete in all respect 92 Guarding at road crossing complete in all respect 93 Supply & Fixing of Following Items to complete the work (If Not available in stores) 94 LT Clamps as per RESSPO Norms for PCC/ST pole 95 Nut & Bolt off size 96 F Clampas per RESSPO Norms 97 Shackle Insulatoras per RESSPO Norms 98 Holding Clampas per RESSPO Norms 99 Stay Clampsas per RESSPO Norms 100 11 KV Composite Polymer Disc insulatoras per RESSPO Norms 101 Top Channel of size 100x50x2240 mmas per RESSPO Norms 102 T off Channelas per RESSPO Norms 103 11 KV Polymer Pin Insulator as per RESSPO norms 104 Battery & Battery Charger 24 V 105 Aluminium Lug 240 sqmm with Nut&Bolt 106 Aluminium Lug 400 sqmm with Nut&Bolt 107 Safe back carriage of Scrap (if any) from work siteto C.B. Ganj store Bareilly approx distance upto 80 Km including safe loading & unloading. 108 Safe back carriage of Distribution Transformer from work siteto C.B. Ganj store Bareilly approx distance upto 80 Km including safe loading & unloading. 109 11/0.4 KV 3 Phase 25 KVA T/F 110 11/0.4 KV 3 Phase 63 KVA T/F 111 11/0.4 KV 3 Phase 100 KVA T/F 112 11/0.4 KV 3 Phase 250 KVA T/F 113 11/0.4 KV 3 Phase 400 KVA T/F

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	02-04-2025	26/EDCB/2024-25_1	Date	07-04-2025
2	27-03-2025	26/EDCB/2024-25	Date	02-04-2025

INR 3540 /-

INR 20000.0 /-

INR 20 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB