Tender For Construction of stadium in Nagar Palika Parishad Chhibramau - Excavation work by mechanical means (Hydraulic excavator)/ manualmeans in foundation trenches or drains (not exceeding 1.5m in width or10 sqm on plan), 2 1:4:8 ( 1Cement :4 Coresand (Zone -III) derived frome natureal sources :8 graded stone aggregrate 40 mm nominal size derived from natural sources 3 R.C.C.workwithcementapprovedcoarsesandand20mm. guageapproved stone grit imthe proportionof 1:1.5:3 insupply of reinforcementthe concrete shall not beless than M-20 Footing 4 R.C.C.workwithcementapprovedcoarsesandand20mm. guageapproved stone grit imthe proportionof 1:1.5:3 insupply of reinforcementthe concrete shall not beless than M-20 Footing 5 Extrafor additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decenter.ing at all level 6 Providingandfixingstainlesssteel(Grade304)railing madeofHollowtubes,channels,platesetc.,including welding,grinding,buffing,polishingandmaking curvature(whereverrequired)andfittingthesamewith necessary stainless steel nuts and bolts complete, i/c fixing therailingwithnecessaryaccessories&stainlesssteel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangementasperapprovalofEngineer-incharge,(for paymentpurposeonlyweightofstainlesssteelmembers shallbeconsideredexcludingfixingaccessoriessuchas nuts, bolts, fasteners etc.). 7 Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundaction and plinth in 8 Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in superstracture above plinth level up to v level in all shapes and sizes in. 9 12mm cement plaster of mix: 1:4 ( 1 cement : 4 coarse sand ) 10 20mm cement plaster of mix: 1:4 ( 1 cement : 4 coarse sand ) 11 Distempering with first quailty acrylic distemper (readey mixed ) having VOC content less than 50 gram/litre , of approved manufacturer and of reuqired shade and all colour all complete to achieve even shade and colour. 12 finshing walls with acrylic smooth exterior paint with silicone additives of requried shade. 13 painting with synthetie enamel paint of approved brand and manufacture of requried colour to give an even sade . Two or more coats on new workover an under coats of suitable shade with ordrinary paint of approvel brand and manufacture. 14 Cement concrete pavement with 1:2:4( 1 cement :2 coarse sand :4 graded stoneaggregate 20mm nominal size ) includingfinishing complete. 15 Kota stone slab flooring 20 mm thik in risers of steps, skirtind , dado and pillars laid on 12 mm thick cement ,mortar 1:3 and jointed with gray cement slurry mixed . 16 Provinding and laying vitrified floor tiles in all colours and shades laid on 20mm thick cementmortar 1:4 jointing with gray cementslurry @3.3kg /sqm including grouting the jointing with white cement and matching pigment etc. 17 Steel reinforcement for RCC works ready to use cut and bend rebars of approved make from factory / work shop to construction site including placing in position and binding all complete upto plinth level . Thermo- mechanically treated bars of grads Fe-500D. 18 Steel work welding in built up section , frame work including cutting hoisting , fixing in position and applying a primer coats of approved steel. In grating, frame, guard bar, railling, bracket, gates etc. 19 Providing and fixing 1 mm thick M.S sheet door with frame of 40x40x6 mm angle iorn and 3 mm M.S gusset plates at the junctions and corners all necessary fitting complete, including applying a primer coats. 20 Providing and fixing glass panes with putty and glazing cilps in steel door windows cleerstory windows all complete with. 21 Steel work welding in built up section , frame work including cutting hoisting , fixing in position and applying a primer coats of approved steel. In grating, frame, guard bar, railling, bracket, gates etc. 22 Providing and fixing 1 mm thick M.S sheet door with frame of 40x40x6 mm angle iorn and 3 mm M.S gusset plates at the junctions and corners all necessary fitting complete, including applying a primer coats. 23 Marking connection of G.I distribution branch with G.I main of following sizes by providind and fixing tee, including cutting andthreading the pipe etc. complete. 24 Marking connection of G.I distribution branch with G.I main of following sizes by providind and fixing tee, including cutting andthreading the pipe etc. complete. 25 Providing and fixing Sanitary Materal something amount 26 Providind and fixing 15 cm wide , 45 cmoverall semi-circular plain G.S sheet gutter with iron brackets 40x3mm size , boltnuts and wasers ect. Including making neessary connection with rain water pipes complete. 27 Structural steel work riveted, bolted or welding in built up sections, trusses and framed work including , cutting hositing ,fixing,in position and applying a primer coats of approved steel primer all complete. 28 Turbo Roof Ventiletur 29 seating chair in holl 30 Betmintion Pole and Net 31 Wiring for light point fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. asrequired.Group A 32 Wiring for light/ power plug with 4X4 sq. mmFRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable (ot loop earthing as required. 33 Wiring for circuit submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in Surface/recessed medium class PVC conduit asrequired. (2x1.5 sq. mm + 1x1.5 sq. mm earth wire) 34 Wiring for circuit submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in Surface/recessed medium class PVC conduit asrequired. (2x2.5 sq. mm + 1x2.5 sq. mm earth wire) 35 Wiring for circuit submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in Surface/recessed medium class PVC conduit asrequired. (2x4 sq. mm + 1x2.4sq. mm earth wire) 36 Wiring for circuit submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in Surface/recessed medium class PVC conduit asrequired. (2x6 sq. mm + 1x6 sq. mm earth wire) 37 Wiring for circuit submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in Surface/recessed medium class PVC conduit asrequired. (2x10 sq. mm + 1x6 sq. mm earth wire) 38 Supplying and fixing of following sizes of medium CIass PVC conduit along with accessories in rface/recess including cutting the wall and naking good the same in case of recessed conduit as required (25 mm) 39 Supplying and fixing of following sizes of medium CIass PVC conduit along with accessories in rface/recess including cutting the wall and naking good the same in case of recessed conduit as required (32 mm) 40 Supplying and fixing of following sizes of medium CIass PVC conduit along with accessories in rface/recess including cutting the wall and naking good the same in case of recessed conduit as required (40 mm) 41 Supplying and fixing of following sizes of medium CIass PVC conduit along with accessories in rface/recess including cutting the wall and naking good the same in case of recessed conduit as required (50 mm) 42 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.(200 mm X 150 mm X 75 mm deep ) 43 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.(250 mm X 300 mm X 100 mm deep ) 44 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (5/6 amps SwÍtCh) 45 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (15/16 amps SwÍtCh) 46 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (3pin 5/6 Socket) 47 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (6pin 15/16 Socket) 48 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 49 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. 50 Installation, testing and commissioning of pre-wired, fluorescentfitting / compact fluorescent fitting of all types, complete with allaccessories and tube/lamp etc., including supplying and fixing balland socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mmthick steel conduit upto 30 cm length, painting and wiring the downrods and connections with 1.5 sq. mm FRLS PVC insulated, copperconductor, single core cable and earthing etc. as required. 51 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. 52 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 32 A TP&N 53 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 150 A, 16 KA,TPMCCB 54 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door 55 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single poll 56 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 57 Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/W) minimum 6.00, Air deliveryminimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 58 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and for all lift, as directed by Engineer-in-charge. 59 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived fromnatural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 60 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 61 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 62 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: 6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 63 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 64 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 65 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 66 Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) 67 Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete 68 Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts
