Tender For Interior Work Furniture Audio Visual Structured Cabling System Networking (Lan), Wi-Fi System - Web Security And Ip Cctv System Etc For Operation Of The Building Of State Disaster Management Authority In Lucknow District, Lucknow-Uttar Pradesh

TDR : 48219403

Tender Notice
Corrigendum Details
BOQ

Expired

Lucknow , Uttar Pradesh

Tender Brief : Corrigendum : Tender For Interior Work Furniture Audio Visual Structured Cabling System Networking (Lan), Wi-Fi System - Web Security And Ip Cctv System Etc For Operation Of The Building Of State Disaster Management Authority In Lucknow District

Document Fees
₹ 2714 /-

EMD
₹ 2220000.0 /-

Tender Value
₹ 12.20 Crore /-

Submission Date
31-03-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	25-03-2025	Extend date and Upload Drawing	Date	31-03-2025

Name of Work: Interior work, furniture,audio visual, structured Cabling System, networking (LAN), Wi-Fi system & web security and IP CCTV system etc. for operation of the building of State Disaster Management Authority in Lucknow district

Sl. No.	Item Description
1	CIVIL WORK Interiror Work (Wooden Flooring, Wall Paneling, Window Blinds, Art & Decore) Providing & Fixing of 10.5 mm thick,7ply construction,top layer 2 mm wood veneer,American exotic bruce,lock & fold locking system,plank size of 120 mm width X 400-1200 mm length,micro bevelled edge,residential/commercial application,floating installation with underlay of foam/polythene duly installed at site with necessary accessories like skirting & profile as per direction of engineer incharge (Make-Armstrong)
2	Providing and fixing of heavy duty tile carpet tile with the fiber of 100% p.p.b.c.f (polypropylene bulked continuous filament ) which s uv rtreated and the way of construction is tufted level loopand the height of pile is 4mm and weight is 580 gsm /m2 +/-5% primary backing is non woven and the secondary backing is bitumen backing standard size of it is 50cm*50cm standard area covered by a box is 5 sq.mtr and area of use is comercial heavy duty and they are it is sound insulstion amd heat insulation and anti static and colorfast and too wearpro ofand fire retardant of hego designer carpet tile
3	Providing and fixing of carpet roll with the faber of 100% nylon which s fire retardant and the way of construction is nylon printed - loop / multi scroll and the gauge ratio of 1/10 gauge the height of pile is 4-5 mm and total height of it is5-6 mm and weight is 500 gsm +/- 5% and total weight is 1300 gsm +/- 5% backing is felt baack and the standard roll width is 4 mtr and the standard length is 30 mtr it is sound insulstion amd heat insulation and anti static and colorfast and too wearproof and fire retardant hego fresco nylon carpetbut Less Vitrified 800x800 mm Rate (1879.95/1.1405/1.01)
4	Same as Above Item No. 3 Add 40 mm C.C Flooring
5	Providing and Fixing Armstrong Channelled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2440 mm or as required by the Architect/ approving engineer, made of a high density fibre board with minimum 830 Kg/M3 density substrate with a laminated facing / wood veneer as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of \ 4mm width and 28mm visible panel each. The panels shall provide a fire reaction of Class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.55. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge.
6	Providing and fixing Armstrong Channelled woodwork perforated panels with ply frame and GI SECTION .5 of width 192mm, thickness of 15mm and length 2440 mm or as required by the Architect/ approving engineer, made of a high density fibre board with minimum 830 Kg/M3 density substrate with a laminated facing / wood veneer as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of \ 4mm width and 28mm visible panel each. The panels shall provide a fire reaction of Class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.55. The panels shall be mounted on special aluminium splines using clipsprovided by Armstrong and approved by the Architect/ Engineer-in-Charge
7	PROVIDING & FIXING OF THERMORY Pine C32 Cladding Panels manufactured by Thermory OU in ESTONIA of size 140 x 20 x 3.0-5.1mtr in conformity with the provisions of the EC Regulation No 305/2011 Construction Product Regulation system of assessment and verification of constancy of performance: System 3 and is in accordance with the requirements of EN 14915:2013 . The Panels should confirm Thermal resistance of 0,12 W/(m K), & Durability Class 2, when thermally modified & reaction to fire is Ds2, d0 (tested according to standard EN14915:2013)
8	The collection, named Dark fantasy, features a high-quality fabric with a width of140cm and is composed of 100% polyester. This fabric is ideal for various end uses, especially T Wash applications, coded as *038. Please note that color shades may slightly vary from dye-lot to dye lots. The fabric quality is a durable black out , designed for lasting appeal. For installation, a silent channel system is included, featuring clips to secure the channel to the wall. The channel measures 7 feet, fitting a window outfitted with four curtains. Each curtain hangs with six runners, totaling 24 runners to ensure smooth movement within the track. The clips in the channel securely hold the curtains, allowing for effortless, silent sliding.
9	The collection, named Erotica, features a highquality fabric with a width of 48 inches and is composed of 100% polyester. This fabric is ideal for various end uses, especially T Wash applications, coded as *038. Please note that color shades may vary between dye lots. The fabric quality is a durable linen plain, designed for lasting appeal.For installation, a silent channel system is included, featuring clips to secure the channel to the wall. The channel measures 7 feet, fitting a window outfitted with four curtains. Each curtain hangs with six runners, totaling 24 runners to ensure smooth movement within the track. The clips in the channel securely hold the curtains, allowing for effortless, silent sliding.
10	Providing and fixing of Marvel make Sunscreen Panel blinds Lucent 5% series. The top channel is extruded by non-rusting Aluminium alloy with 1.25mm thickness and powder coated for long life. The channel is designed with a support beam to keep it straight. The channel is available in 3, 4 and 6 Way. For Decorative channel need to add valance. End caps are also available for good finishing. Property of Marvel make Panel Blinds Lucent 5% series having 0.53 mm fabric thicknness of approved shades. Its material compostion are 70% PVC and 30% PES. The weight of fabric is 430 gsm (±5). The Light fastness of fabric is of grade 8 and green guard approved. The fabric shall be enclosed in the suitably created pocket along with tube. Fabric Coverd Bottom Channel of Panel Blinds is made of non rusting Aluminium powder coated with 2 mm thickness. Extension Brackets are available in Wall and Ceiling option. Metal bracket powder coated for long life with thickness of 2.25mm and ceiling holder of 0.75mm. Exclusive Bottom rail are conjoined with each other. Bottom rail is made of non-rusting Aluminium powder coated with 2.25mm thickness. The bottom rail shall be closed from sides with the end caps to give a neat look. Panels can be moved using a cord. Cord made of Polyester with thickness of 2.5mm. Panels can be moved using a wand. Wand is made of non-rusting Aluminium alloy with thickness of 1.5mm, powder coated for long life and can be hanged through hook. The blind can be stop in desire position with help of stop Autolock System.
11	Same as Item no. 11 but RO CHANSON REVOLUTION PL-A 902
12	Same as Item no. 11 but RO Plant -2000 Lts Capacity
13	Same as Item no. 11 but Supplying,Fixing of Gyser 15ltr capacity.
14	Supply,installation,testingandcommissioningof profilelightinginfalseceing/wallpanelingwith15W/m LED strip light complete with driver, connections etc., as required.
15	Supply,installation,testingandcommissioningof Spotlightinginfalseceing/wallpanelingwith7W/m LED strip light complete with driver, connections etc., as required.
16	Plant with Planters - Areca Palm (3-5 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
17	Plant with Planters- Bonsai Plants (2-3 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
18	Plant with Planters- Raphis Palm (3-5 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
19	Plant with Planters -Agnolima red (3-5 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
20	Plant with Planters- Agnolima green white (3-5 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
21	Plant with Planters- Drecena mahatma (3-5 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
22	Plant with Planters- Drecena masseangena (3-5 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
23	Plant with Planters- Xanadu (3-5 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
24	Plant with Planters- Snowwhite (3-5 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
25	Plant with Planters- Cane Palm (3-5 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
26	Plant with Planters- drecena Victoria (3-5 Feet Height) with 15-20 Inch dia pots (PVC/FRP)
27	Plant with Planters -100 Nos Painting, Texture & 6 Nos Sculpture
28	Furniture Make : Godrej/Geeken/DeliteRhine V3 1Str Recl SLthr Brown Overall Size : Width: 83cm Depth : 74cm Height : 100cm Seating Height : 44cmstitching: thread :nylon 40 tktpitch: gap 2 mm from border + pitch 6 per inch Furniture Make : Godrej/Gekon/Delight leather/pvc/pu/fabric:full pu leatherette. frame material (tropical wood / pine wood/ rubber wood):rubberwood moisture content :12 – 14 % seat foam: (density, type) :24 density foam + pocket spring (49 nos. of dia 50 mm / seat) spring rod dia =1.6 mm+ 24 density foam. back foam: (density, type) :24 density foam + polyester fabric (recron).armrest foam: (density, type) :24 density foam
29	Providing, supplying and placing of three seater sofa. SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.
30	CONFORTO 3 ST SOFA IN SYNLTHCOPPER DUSTOverall Size : Width: 2150mm Depth : 935mmHeight : 940mm Seating Height : 490mm Upholstery • Material : PVC • Shade : Tan Brown • Thickness : 1 mm • Weight (GSM) : 575Frame : • Material : Pine Wood • Moisture content : 10 - 12 %Foam : • Material : Slab stock • Density : Seat - 28 kg/m3 Back - 28 kg/m3 with recron fillerArmrest – Siliconized recron filler Webbing : • Material : Nylon • Thickness : 2 mmLegs : • Material : Rubber wood
31	CONFORTO 2 ST SOFA IN SYNLTHCOPPER DUSTOverall Size : Width: 1450mm Depth : 935mmHeight : 940mm Seating Height : 490mm Upholstery • Material : PVC • Shade : Tan Brown • Thickness : 1 mm • Weight (GSM) : 390Frame : • Material : Pine Wood • Moisture content : 10 - 12 %Foam : • Material : Slab stock • Density : Seat - 28 kg/m3 Back - 28 kg/m3 with recron fillerArmrest – Siliconized recron filler Webbing : • Material : Nylon • Thickness : 2 mmLegs : • Material : Rubber wood
32	Pisa CenterTable Providing, supplying and placing of coffee table. CENTER TABLE GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for focing with understructure.CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762. Width of table= 112.0 cm, Depth=60.0 cm, height=34.9 cm.
33	BloomCoffeeTableWalnutOverall Size : W x D x H - 1000 x 600 x 430mm. 1. Understructure: Legs, top wooden frame & bottom tie members are made out of first quality rubber wood without knots & defects on all faces. Bottom tray is made of 1.2mm thick MS sheet. Metal brackets are used for assembly purpose. 2. Top: 8mm thick toughened glass. 3. Construction: Knock-down assembly. 4. Finish: Bloom_coffee table is in two colour finish option - ÿ Option - 1 : Natural finish ÿ Option - 2 : Walnut finish Wooden members are PU painted with hardness-2H. Metal components are powder coated. Bottom MS metal tray is having floral pattern laser-cut. Top glass is having sand blasted floral pattern on bottom surface.5. Hardware: Knock-down assembly with high quality standard hardware like screws, metal
34	BloomCornerTableWalnut Overall Size : Width : 60cm Depth : 60cm Height : 45cm. 1. Understructure: Legs, top wooden frame & bottom tie members are made out of first quality rubber wood without knots & defects on all faces. Bottom tray is made of 1.2mm thick MS sheet. Metal brackets are used for assembly purpose. 2. Top: 8mm thick toughened glass. 3. Construction: Knock-down assembly. 4. Finish: Bloom_coffee table is in two colour finish option -ÿ Option - 1 : Natural finish ÿ Option - 2 : Walnut finish Wooden members are PU painted with hardness-2H.Metal components are powder coated.Bottom MS metal tray is having floral pattern laser-cut.Top glass is having sand blasted floral pattern on bottom surface.5. Hardware: Knock-down assembly with high quality standard hardware like screws, metalinserts, wooden dowel, plastic leg bush etc..
35	8’ W L-SHAPED DESK 2400W X 1770D X 740H Supplying and placing in position Reception table of the following specifications. Work Surface - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Access Flap along with a Gromett is provided on work surface for wire management Wire Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cut out provision for Anchor Roma) which is fixed with worktop along the width at Access Flap position.Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping TOP shelf - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. Length - 2400mm Depth - 1770,870mm Height - 1080mm This product should be certified by GREENGUARD & Indoor Advantage GOLD.
36	ESCA STD 2ARH SLT Single BedOverall Size :Width: 208cmDepth : 92.5cmBed Height : 38.5cm Bed with Headboard Height : 84cm. Color : Black . bed -metal frame materials & dimensions:(gauge +/- 0.1mm)m.s. pipe 25.4x 50.8 x 1.2 thk.;m.s. pipe 19.05x 19.05 x 0.8 thk.;m.s.angle 20x20x1.6 thk;m.s. pipe dia. 50.8 x 0.9 thk.;m.s. pipe dia. 15.875 x 0.8 thk.
37	Hero Mat 78 36 4 Thickness 50 mm.Quilting Material-PU Foam.Density of Quilting Material (± 2 Kg/m3)-18 Kg/m3.Mattress Top-Box Type.Cover-Fabric Composition-Polyester.MATTRESS COVER-Printe Plw Nice L:425mm W:675mm Size ( in cm) : 43 x 69 Fibres : 15 Dn Conjugated silconized Fabre weight - 650 Fabric- Flower Embossed 90 GSm Polyester Packaging - Nonwoven Fabric Packaging
38	Providing, supplying and placing of Mid Back Chair. SEAT ASSEMBLY: The seat assembly should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D).BACK ASSEMBLY: The back asembly. should bemade of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should beupholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 60.5 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression.ARMRESTS: The one-piece armrests should beinjection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should bedesigned with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre• Upright position locking. • Tilt tension adjustment .PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.TELESCOPIC BELLOW ASSY: The bellow should be3 piece telescopic type and injection moulded in Black Polypropylene.PEDESTAL ASSEMBLY: The pedestal should beinjection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.)TWIN WHEEL CASTORS: The twin wheel castors should beinjection moulded in black nylon.Overall Dimensions of Chair Seat Height - min 43.3 to max 54.3cm. Height - min 89.5 to max 100.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.This product should be certified by Indoor Advantage GOLD & GREEN PRO.
39	Providing, supplying and placing of Visitor Chair. SEAT ASSEMBLY: The seat assembly should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D)BACK ASSEMBLY: The back asembly. should bemade of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should beupholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression. ARMRESTS: The one-piece armrests should beinjection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should becantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube.Overall Dimensions of Chair Seat Height - 46.5cm. Height - 93.5cm. Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm.This product should be certified by Indoor Advantage GOLD & GREEN PRO.
40	SCINTILLA-With Desklet & Arms Providing, supplying and placing of classroom chair with desklet. SEAT / BACK: The seat sub-assembly should bemade up of 1.2±0.1cm thk Plywood upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. The seat can tip-up when not in use and thshould befeature can be used while stacking the chairs horizontally The back sub-assembly should bemade up of injection-moulded polypropylene inner upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. The contoured back with width extension at the bottom should be a should bedesigned to give comfort to lower back. The back flexing features allows the back to tilt by 9c±2\" to aid the user in adopting a comfortable reclining posture. Both these sub-assemblies should befixed to the tubular structure,BACK SIZE: 45.2cm (W) X 44.6cm (H) SEAT SIZE: 47.0cm (W) X 50.0cm (D) TUBULAR FRAME STRUCTURE: The powder-coated 4 leg structure should bemade of 2.2 ±0.03cm dia x 0.25 ±0.02cm thk M.S. E.R.W. Tube front and rear leg welded along with connecting tube made of 1.9 ±-0.02cm dia x 0.2 ±0.016cm thk M.S. E.R.W. Tube to form the tubular frame assembly. The legs should beprovided with injection-moulded adopter bush in black Nylon and brake-loaded castors enabling easy maneuvering while not in use and stable sitting while in use_ The chairs can be stacked horizontally when not in use_ POLYURETHANE FOAM: The Polyurethane foam should bemoulded with density = 70.0 ±8.0 kg/m3 and Hardness = 12 ±2 for Seat & 16 ±2 for back at 25% compression.ARMRESTS: The armrest structure should bemade up of 2.2 ±0.03crn dia x 0.25 ±0.02cm thk M.S. E R.W. Tube welded to the Tubular Frame structure and having a scratch-resistant tant ABS Arm top.FULL DESKLET: The Full Desklet assembly should beFlip-up type and should bemade up of extension tube of 1.9 ±0.02em dia x 0_2 ±0.016cm thk PAS. E.R.W. Tube and a support tube on L.H. side of 1.6 ±0.02cm dia x 0.2 ±0.016cm thk M.S. E.R.W. Tube on which an scratch resistant tant ABS desklet top should befixed and covered on bottom side with a bottom cover. BRAKE-LOADED CASTORS : The brake-loaded castors should beassembled to the chair legs, to give a free movement for maneuvering the chair when not in use and it will brake the movement when load should beapplied (while in use) to give a stable feel. The twin wheel castors should beinjection molded in black Polypropylene. Overall Dimensions of Chair Seat Height - 47.5 cm. Height - 89.0cm. Width & Depth of Chair as measured from base - Width-66.5cm and Depth-84.0 cm.This product should be certified by Indoor Advantage GOLD & GREEN PRO.
41	Supplying and placing in position office table of the following specifications. 1200W X 600D X 750H Worktop-Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Access Flap provided on work surface for wire management.Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm.Cross Members-Cross Members in Unitised T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table.Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles.Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position This product should be certified by GREENGUARD, Indoor Advantage GOLD & GREEN PRO.
42	Orlando P 3str sofa Plthr Brwn Overall Size :Width: 182cmDepth : 92cm Height : 89cm Seating Height : 47.5cm THREAD : Nylon . Material Handling Data Sheet (MSDS) for Glue Standard of Plywood used: IS 303 Commercial Plywood , Thickness 12mm
43	Providing and supplying of Auditorium Chair. SEAT REST ASSEMBLY: The seat rest assembly is 1.5±0.1 cm thk. flat plywood measured and in-situ moulded with polyurethane foam & upholstered with polyester fabric and enclosed by an injection moulded cover. The Seat has an auto-tip up feature making it stay in upright position when not in use enabling clear row passage. The seat profile has a large waterfall edge to help the users get necessary comfort in popliteal region. SEAT SIZE: 45.0 cm. (W) x 50.5 cm (D) x 13.8 cm (T) Approx.. BACKREST ASSEMBLY: The backrest assembly is made up of 1.2±0.1cm thk flat plywood measured and upholstered with polyester fabric and enclosed by an injection moulded back cover. The back foam is designed with contoured back support for extra comfort. HIGH BACK SIZE: 48.7 cm. (W) x 76.9 cm (H) x 12.5 cm (T) Approx. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for Seat and Back is moulded with Density = 45 +/- 2kgs/m³. LEG FRAME ASSEMBLY: The leg frame assly is fabricated from M.S. tube 6.0±0.03cm x 4.0±0.03cm x 0.2±0.016cm thk. welded with grouting member. It is black powder coated ( DFT 40-60 microns ) & grouted to the floor using anchors. ARMREST ASSEMBLY: The armrest is made up of black integral skin polyurethane with 65+/-10 Shore \"A\" hardness and reinforced with M.S. insert fixed with leg frame. The armrests are scratch and weather resistant. The armrest is available in two options- with and without cup holder. ARMREST CLADDING: The armrest cladding is made up of 0.9±0.1 cm thk Plywood & upholstered with polyster fabric. The cladding is fixed to Aisle Side panel Only. All in between panels will not have armrest cladding. POWDER COATING: All steel components are Epoxy Polyester Powder Coated ( DFT 40-60 microns ). FLOORING PRE-REQUISITE : The auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368.
44	Providing, suplying and placing of stoarge unit.Overall Dimensions of SD 4 Single Drive Cover Unit 2 Bay(U/C + Fittings + Cover) shall be 4800mm(W) x 400mm(D) x 2113mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS:513, Gr.D. Each body shall have 1 main unit plus add on units (0,1,2,3 depending on no. of bays 1, 2, 3, 4 respectively) .Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be with 12 bend panel made from CRCA steel 0.7 mm thick IS:513, Gr.D .Uniformly distributed load capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick conforming to IS : 2062. The Movements shall be Drive Type configuration : In case of D2,D3 & D4 movement of units is achieved mechanically through a PU Hand Wheel and Sprocket-Chain arrangement mounted rigidly onto body size. For D3 each movable undercarriage shall be provided with 3 driving rollers and 3 driven rollers.LD understructure has 2 nos. of anti-tilt bearing assembly.The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U-channel of the understructure using machine screws. This wheel-housing is made of engineering plastic material made by injection-molding process. The entire roller assembly is designed to withstand the maximum loads of the body. Fittings shall be centralized locking arrangement through Lock which is operated by spring mechanism mounted onto understructure of last drive unit. The lock is made of 0.8 mm thick conforming to IS:513..The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. The PU handwheel is rigidly fixed at suitable height on side of the body & projects out of cover by another 99.0 mm. Fixed unit (SD) does not have the Drive Unit Cover. When the last Body is Twin Drive, i.e., TD, hinged doors are provided for the last body. In this scenario the centralized locking system is fitted on the last TD body. Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized / Zn Plated.Also total no. of loading levels per understructure shall be 20 for SD4. Label holder - It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted.This product should be certified By GRIHA & SVAGRIHA , GREEN PRO, GREENGUARD, Indoor Advantage GOLD
45	RADIANCE BOOK RACKS RDNC DR2 MTL SW 2400mm 600mm 2400W X 600D X 2078H Overall Size WxHxD - Double Body 2400W : 2400 x 2078** x 600 25mm WILL BE ADDED ON BOTH SIDE FOR WOODEN FRONTBody - a. Side panels, Frame & Cross L bracket are made using 0.8 mm CRCA (IS:513). b. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles in each body. The tie rods are fixed in a shape of ‘X’ The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade. c. Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLT ref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue Under Structure - Under structure is made of 0.8m CRCA (IS:513). b. Sizes of under structure for Double body : 1. 1200W x 595D x 80H 2. 2400W X 595D X 80H Shelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below. c. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit. d. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum.Construction- Completely Knock down construction Finish-All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns.Stackability- The add-on units can be stacked width wise to form a bank of racks having common side panel up to 4800W Shelves back stiffener - At the rear side of the shelves back stiffeners are provided. These act as separators between front & rear books made of 0.8mm THK CRCA (IS:513) Label Holder -It is an aluminum extrusion of length 596mm for double body bookrack , fitted on to front of body. The Paper is 300GSM matt finish, to be inserted into the aluminum extrusion. The length of paper is 596mm for double body bookrack. Optional Accessory - Rollout shelf: Rollout shelf accessory is a pull-out tray which has 2 nos. ‘C shaped brackets of 1.2mm thk. Firmly mounted on shelf support with adjustable height. Slides are then fixed on these C brackets and rollout shelf assembly is mounted on the slides. This shelf opens outwards up to 250mm & has load capacity of 40 KG UDL.b) Book Separator: Book separator is made of 2mm thk. CRCA sheet (IS:513) and is used to as a partition and support for books placed vertically on a shelf.
46	ARISTO TBL 1800 LH RU 1200 PDL Supplying and placing in position Main Table,ERU & pedestal of the following specifications. 1800x2100x750 Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. This product should be certified by GREENGUARD, Indoor Advantage GOLD & GREEN PRO.
47	Supplying and placing in position Back unit of the following specifications.1650x500x750 Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves.Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security This product should be certified by GREENGUARD, Indoor Advantage GOLD & GREEN PRO.
48	Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following features:· 360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustmentHEADREST: The Headrest sub-assembly is made up of injection moulded glass filledPolypropylene which is upholstered with moulded HR polyurethane foam and fabric. Ithas an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair.The complete headrest assembly is retro fit to the main chair.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm.PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 117.0 - 130.0 CM. SEAT HEIGHT (SH): 44.5 - 54.0 CM.This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD,BIFMA Level 2 & GREEN PRO.
49	Providing, supplying and placing of Two seater sofa. SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 135.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.
50	BREAKOUT TABLE(UPBEAT) Suppling and installations of reading table 6 seater with overall size - length 2700 mm X width 1200 mm X worktop height of 750 mm and screen height of 300 mm above the table top, with per seater size of length 900 mm X Depth of 600 mm . The table will be desk-based system with a platform understructure made up of a combination of MS. Tubes and plates. Providing metal powder coated Cube leg for standard workstation height of 750mm which helps to provide a stable and sturdy base for the worktops. Ta ble top is made up of 25 mm thick Pre-Laminated Board conforming to IS: 12823. All the edges of table surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The table top should have the provisions for three numbers of Fabric T- mould shared 19 mm thick screens on work surface of ht 300 mm, which is mounted on Studs. Understructure comprising of metal powder coated cross connectors between legs and legs. which is made up of metal powder coated finish and theentire assembly is fixed to the worktop for extra support. Metal modesty is made with lazer cut perforated metal sheet which are mounted on legs with the help of the modesty mounting brackets. Modesty terminates at 400 mm from ground level. The productshall be GREENGUARD certified by UL LAB, Bifma level 2 by SCS Global services , Indoor Advantage by SCS Global services, GREENPRO by CII (confederation by Indian industry) ; GRIHA & SAVGRIHA Certified the mentioned certificates to be enclosed in bidwhile participation. Buyer can cross verify the same on internet. In case of any deviation found, the offer is liable for rejection. (4 Seater)
51	RECTA WORKSTATION(WISH)WITH KBPT AND CPU TROLLY WITHOUT PEDESTAL900W x 600D X 1200H Providing and placing of pannel based recta workstations of overall size W 900 X D 600 X H 1200 , worktop height is 750 mm with partition thickness as 52.4 mmthk and ht -1200 including powder coated aluminium trims.FIN:out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate or fabric at intermediate level. Top block finished in fabric magneticfinish. Bottom block is finished in metal finish.SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic along with split white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh.Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 900 mm w x 600 mm d. CPU trolley - with castors.KBPTwithout mousetray - metal. This product is certfied with bifma level 2 by SCS global services , Ul greenguard , Inddor advantage gold by SCS global services, Green pro by CII and Griha by griha council, OEM is IGBC platinum certified.
52	NAMASTE 3S Fronttype Choco2044 X 698.5 X 890
53	NAMASTE 3S Midtype Choco2044 X 1080 X 890
54	NAMASTE 3S Reartype Choco2044 X 751 X 890
55	M10 * 165 CAS 12 pcs / pkt ( Chem)
56	FLIP TBL MEM 1800W_750D FR OK 1800 x 750 x 750 Providing, supplying and placing of Foldable, Stackable, Cafeteria Tables.Overall Dimension - 1800 x 750 x 750 Table top should be made of 25min thk. MDF OSR board (Bottom side in white color) as per IS:12406 with membrane finish on top side. Legs should be made by welding the combination of MS ERW round Tube 063.5 x 2mm THK as per IS: 7138, flanges made CRCA sheet of 1.6mm thk. and 1.2mm thk. as per IS 513 and inside plates made of HR 5mm thk. sheet as per IS:2062. The Assembly will be epoxy polyester powder coated of minimum thickness 45 microns. The Table top will fold upside at offset center pivot provided on support bracket which should be Aluminum alloy (ADC12) pressure die cast part coated with epoxy polyester powder coating of minimum thickness of 45 microns. Table top connected with spring loaded mechanism with pull handle made of MS ERW 016x1 2mm thk with an insert tube of 012.7x1.6mm thk tube as per IS:7138 coated with epoxy polyester powder coated of minimum 45 micron thickness to operate table top. Legs should be provided with casters of 065mm lockable type for ease of movement and can be locked when required at any position.
57	SCINTILLA-W/o Arms & W/o Desklet Manual Tip up Seat Providing, supplying and placing of classroom chair. SEAT / BACK: The seat sub-assembly should bemade up of 1.2±0.1cm thk Plywood upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. The seat can tip-up when not in use and thshould befeature can be used while stacking the chairs horizontally The back sub-assembly should bemade up of injection-moulded polypropylene inner upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. The contoured back with width extension at the bottom should be a should bedesigned to give comfort to lower back. The back flexing features allows the back to tilt by 9c±2\" to aid the user in adopting a comfortable reclining posture. Both these sub-assemblies should befixed to the tubular structure, BACK SIZE: 45.2cm (W) X 44.6cm (H) SEAT SIZE: 47.0cm (W) X 50.0cm (D) TUBULAR FRAME STRUCTURE: The powder-coated 4 leg structure should bemade of 2.2 ±0.03cm dia x 0.25 ±0.02cm thk M.S. E.R.W. Tube front and rear leg welded along with connecting tube made of 1.9 ±-0.02cm dia x 0.2 ±0.016cm thk M.S. E.R.W. Tube to form the tubular frame assembly. The legs should beprovided with injection-moulded adopter bush in black Nylon and brake-loaded castors enabling easy maneuvering while not in use and stable sitting while in use_ The chairs can be stacked horizontally when not in use_ POLYURETHANE FOAM: The Polyurethane foam should bemoulded with density = 70.0 ±8.0 kg/m3 and Hardness = 12 ±2 for Seat & 16 ±2 for back at 25% compression. TWIN WHEEL CASTORS: The twin wheel castors should beinjection moulded in Black.Overall Dimensions of Chair Seat Height - 47.5 cm. Height - 89.0cm. Width & Depth of Chair as basel - Width-64.4cm and Depth-64.5 cm. This product should be certified by Indoor Advantage GOLD & GREEN PRO.
58	Time Out 4 Seater PU Coated Time Out 4 Seater PU Coated size shall be 1135 Width mmx 1175 Depth mmx 750 Height mm. Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .
59	Unwind Café Chair-MS Powder Coated Understructure Providing, supplying and placing of Café Chair. The Seat and Back should bemade up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should bemade from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should bemade of indoor grade PolyPropylene compound and snap fitted with tubular frame.Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-52.5 cm and Depth-55.8 cm.
60	Adriana Single Bed Walnut Overall Size :Length - 2060.0 mmWidth - 1131.0 ram Height - 945.0 mm Material:Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it.Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Construction :Knock Down construction.Packets : 1 Bed in 1 packets. Finish :18 mm thick Prelaminated Particle Board is in Walnut shade. Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10).
61	Ortho Plus Mat 78 36 5 Thickness: 10 cm / 12.5 cm As intelligent as a mattress can get. A mix of different foamsprovides support and regularizes pressure points. Convolutedfoam in the topmost layer maintains airflow and enhancesthe comfort level by giving a feeling of acupressure to thebody. A bonded foam in the base provides direct support,while a layer of softy foam in (5” variant) the middle providesindirect support to the reclining body.
62	Adriana 2Dr Wrdrb Wal Overall Size including top cornice : Width - 946.0 mm Depth - 598.0 mm Height - 1941.0 mmMaterial :Body panels are made of 18 mm thick Prelaminated Particle Board.All the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Door are made of 18 mm thick Prelaminated Particle board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panel are made of 18 mm thick Prelaminated Particle board with all the exposed edges are edge banded with 0.8 mm thick PVCedge banding and with imported H.D.F. foil wrapped decorativetrim fixed on to it. Drawer components are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Body back and drawer bottom are made of 8 mm thickPrelaminated particle board.Top cornice is made of imported H.D.F. foil wrapped decorative Trim. Hardware : The high quality hardware used like Roller slides, Hinges , minifix,wooden dowels is of make Hettich.. Lock used for main door is 3 way lock and lock used for drawer is cam lock Construction : Knock Down construction. Packets : 2 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade.
63	Champ Independent table 3 feet wide Providing, supplying and placing of study table.Its size shall be900 Width mmx 600 Depth mmx 745 Height mm. The top shall have desk panel made from 25 mm thick pre-laminated boards with PVC edge banding on all sides . Understructure shall be made of 50.8 mm x 25.4 mm x 1.25 mm thick powder coated ERW tubes at base which are welded to the vertical channels shall be made of 0.6 mm thick powder coated MS \" C \" sections . Footrest and Modesty panels provided for stability . Fabric life and OHSU too can be offered so is the drawer unit either with hinged door or with box filling drawers . The tubes shall be closed with plastic caps . Level adjustors are provided to take care of unevenness in floor .
64	Aero King bed Valigny Oak King Dim-1922 x 2304 x 1030 mm (W X D X H).Bed Structure-Matt-Black powder coated Metal Frames of 25 mm square MS pipes (1.2 mm thick) and MS Channels (1 mm thick) Foot-Board and Side Panels-Made of 2 parts. (A) Lower part in 18 mm PLT while (B) upper part is High-Gloss PU painted 18 mm MDFHeadboard (Cushioned Panels – Caprinova 2 tone Brown)- Side Panels of the Headboard part is High-Gloss PU painted 18 mm MDF while the rest is made in 18 mm PLTHeadboard front has two openable upholstered cushioned panels covering storage area. Middle panel of headboard is also openable upholstered cushioned panel and can be used as coffee tableMattress Panel-18 mm thick PLT boardHinges, KD Fittings-Hettich (Germany)
65	Aero bedside table Valigny Oak Dimensions- 454 x 450 x 503.5 mm (W X D X H) without bush.Back Panel, Drawer Bottom- 9 mm thick PLT. Other Panels- 18 mm thick PLT with 2 mm thick PVC edge banding. Drawer Front- 18 mm Thick PU painted MDF. Minifix, Dowels- Hettich (Germany). Drawer Slides- High-Quality Quadro Slides Hettich-make. FINISH-PU parts: Cream colour (NCS S 0505-Y40R).All PLT Boards in Valigny Oak having matching 2mm thick PVC edge banding.
66	Orlando P 1str sofa Plthr Brwn Overall Size :Width: 92cmDepth : 92cm Height : 89cm Seating Height : 47.5cm THREAD : Nylon . Material Handling Data Sheet (MSDS) for Glue Standard of Plywood used: IS 303 Commercial Plywood , Thickness 12mm
67	Opulent Advance 3sth SytlhBeige/Black Overall Size :Width: 201cmDepth : 94cm Height : 76cm Seating Height : 39.5cmUpholstery:Material :PVC , Shade :Two tone –Beige and Black ,Thickness :1 mm . Frame :Material :SolidWood with ply cross section , Moisture content : 10 -12 % ,Thickness of Plywood used :10mm . Foam : Material : Slab stock .Density: 28 kg/m3atseat and backwith23 kg/m3 softy foam
68	RECTA WORKSTATION(WISH) WITH KBPT AND CPU TROLLY AND PEDESTAL 1500W x 600D X 1200 H Providing and placing of pannel based recta workstations of overall size W 1500 X D 600 X H 1200 , worktop height is 750 mm with partition thickness as 52.4 mmthk and ht -1200 including powder coated aluminium trims.FIN:out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate or fabric at intermediate level. Top block finished in fabric magneticfinish. Bottom block is finished in metal finish.SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic along with split white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh.Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w x 600 mm d.Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors.KBPTwithout mousetray - metal. This product is certfied with bifma level 2 by SCS global services , Ul greenguard , Inddor advantage gold by SCS global services, Green pro by CII and Griha by griha council, OEM is IGBC platinum certified.
69	Impress Main Desk Supplying and placing in position Main table of the following specifications. The Main table shall be of size 1800 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm.
70	Supplying and placing in position Back unit of the following specifications. Its size shall be of 1400 Width mm x 470 Depth mm x 760 Height mm.The top panel size shall be 25 mm thick MFC (Melamine faced chipboard). The door panels and all other panels should be 18 mm thick MFC (Melamine faced chipboard).The handle shall be of metal.
71	MARVEL HIGH BACK LEATHERITE CHAIR The chair comes with an overall size of Back: 47.7 cm. (W) x 76.4 cm. (D) , Seat :47.0 cm. (W) x 48.0 cm. (D),Overall Dimensions of Chair Seat Height -43.1-53.1cm Height -112.7-130.2cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm 1) SEAT ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) 2) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm 3) ARMRESTS: The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. 4) ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360\" revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. 5) SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. 6) ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. 7) PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. 8) PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) 9) TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter. The product is certified with Indoor Advantage Gold by SCS Global Services, UL Greenguard by UL Lab, BIFMA Level 2 by SCS Global Services, Greenpro by CII (Confederation of Indian Industry), and Griha by Griha
72	KAREENA HIGH BACK LEATHERITE CHAIR The chair comes with an overall size of Back: (W)48.0 cm x (H)76.0Cm, Seat :(W)51.0 cm x (D) 48.0 cm. Overall Dimensions of Chair Seat Height - min 47.5 to max 57.5cm. Height - min 103.5 to max 120.5cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. SEAT/BACK ASSEMBLY: The seat should bemade up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should bemade up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should bedesigned with contoured lumber support for comfortable seating posture.BACK SIZE48cm.(W) X 76.0cm.(H)SEAT SIZE51.0cm.(W) X 48.0cm.(D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should bemoulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgffor 25% compression. 3. ARMRESTS :The armrest top should bemade of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height should beadjustable up to 6.5±0.5cm. in 5 steps & also has swivel adjustment of 22º±2° on both sides. 4.KNEE TILT SYNCHRO mechanism WITH SEAT DEPTH ADJUSTMENT mechanism: The mechanism should bedesigned with the following features: •360° revolving type. •Single point control. •Front pivot for tilt with feet resting on ground ensuring more comfort. •Tilt tension adjustment. •4-position locking with anti-shock feature. •Seat back tilting ratio of 1:2•Seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions 5.ADJUSTABLE BACKREST: The backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and can be locked in 5 positions for correct position of lumber support. 6.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 9.0 ±0.3cm. 7.PEDESTAL ASSEMBLY:The pedestal should befabricated from 0.2 ± 0.02 cm thick HR sheet ( should be: DD 1079 / HRskin pass ),chromeplated and assembled with injection moulded black polypropylene hub cap and 5 nos. twinwheel castors. The pedestal should be66.0±0.5cm. Pitch-center dia. (76.0±1.0 cm with castors).8.TWIN WHEEL CASTORS The twin wheel castors should beinjection moulded in black Nylon.
73	Table - T 31 size shall be900 Widthx 590 Depthx 750 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall besq. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mmthick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic. The product is certified with Indoor Advantage Gold by SCS Global Services, UL Greenguard by UL Lab, Greenpro by CII (Confederation of Indian Industry), and Griha by Griha Council.
74	Orlando P 2str sofa Plthr Brwn Overall Size :Width: 125cmDepth : 92cm Height : 89cm Seating Height : 47.5cm THREAD : Nylon . Material Handling Data Sheet (MSDS) for Glue Standard of Plywood used: IS 303 Commercial Plywood , Thickness 12mm
75	Mingle_ MODULAR TABLE(23 seater) MINGLE MODULAR PLT_2 STR MAIN ST MINGLE MODULAR PLT_2 STR SHARED ST MINGLE MODULAR PLT_2 STR END_RH ST MINGLE MODULAR PLT_2 STR END_LH ST 1350 X 600 X 740 MINGLE MODULAR PLT_1 STR SHARED ST 675 X 600 X 740 MINGLE MODULAR PLT 2350W ST 2350 X 850 X 740 Accessories Dsk 2wayNamePlate Tex.B.WHITE Dsk Mod Doc Shelf M.BLACK Dsk HDMI Wire Man. M.BLACK
76	Providing, supplying and placing of Mid Back Chair. SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.Seat SIZE: 45.5cm. (D) x 52.4cm. (W) BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner.HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D)ARMRESTS: The armrest having four range of adjustment· Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. · Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel adjustment- 2 position, 12°±2° swivel inside· Arm top width adjustment - Any position (2.0±0.5cm range each arm top)· Arm top To - Fro Adjustment- any position (4.0±0.5cm range)· Armrest top is made up of high density PU molded over glass filled Poly-amide inner. POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following features: · 360° revolving type. · Forward tilt of sesat and back.· Upright tilt lock.· Tilt tension adjustment can be operated in seating position. · 3-position Tilt limiter.SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia.TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal. WIDTH (W): 74.0 CM. DEPTH (D): 74.0 CM. HEIGHT (H): 112.0 - 132.5 CM. SEAT HEIGHT (SH): 44.5 - 58.0 CM.This product should be certified by GREENGUARD GOLD & GREEN PRO.
77	The executive high back chair comes with an overall dimension of size Back: (W)47.5 cm. (W) x 77 cm. (D) Seat :47.6 cm. (W) x 49.2 cm. (D) Overall Dimensions of Chair Seat Height -44.5 to 54.5 cm. Height -114.0-131.5 cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. 1) SEAT/BACK ASSEMBLY : The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK SIZE : 47.5 cm. (W) x 77 cm. (D) 2) ARMRESTS: The armrest top should bemoulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. 3) ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should bedesigned with the following features: • 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should bemade up of HPDC Aluminium black powder coated. 4 SEAT DEPTH ADJUSTMENT: Seat depth adjustment should beintegrated in the seat through a sliding mechanism. Seat depth adjustment range should beof 6.0±0.5 cm. 5 ADJUSTABLE BACK SUPPORT: Back Frame should beconnected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. 6 PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. 7 PEDESTAL ASSEMBLY The pedestal should beHigh Pressure Die cast polishedAluminium and fitted with 5 nos. twin wheel castors. The pedestal should be65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) 8. TWIN WHEEL CASTORS:The twin wheel castors should beinjection mouldedin Black Polypropylene. The product is certified with Indoor Advantage Gold by SCS Global Services, UL Greenguard by UL Lab, BIFMA Level 2 by SCS Global Services, Greenpro by CII (Confederation of Indian Industry), and Griha by Griha Council.
78	IMPRESS / ARRIVE PREMIUM BACK UNIT VENEER FINISH
79	GRANDEUR TABLE SIZE :- 3000 L X 1050 D X 740 H
80	GRANDEUR 7FT BACK UNIT
81	Supplying and placing in position conference table of the following specifications with followingsize shall be2 STR MAIN - 1350 X 600 X 740. 2 STR SHARED - 1350 X 600 X 740 2 STR END_LH - 1350 X 600 X 740 2 STR END_RH - 1350 X 600 X 740 1 STR SHARED - 675 X 600 X 740 2350W - 2350 X 850 X 740 Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes. Understructure-It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction. Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). Wire Management-An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop. This product should be certified by GREENGUARD, Indoor Advantage GOLD, GRIHA & SVAGRIHA & GREEN PRO.
82	CUBICAL WORKSTATION(WISH) 1500W x 600D MAIN DESK 900W x 450D ERU
83	Electrical work Audio SystemSupply, Testing, and Commissioning of Chairman unit:-Wired Table Top unit, frequency response: 40 to 16 KHz, Sensitivity: -44dB+/-2dB, embedded installation and detachable microphone system, power supply for all the micrphones is provided by main unit, LED-red indicator shows the status of microphone, talk button with dual color LED light- Green Color-On, Red Color Talk, Daisy Chain on CAT 6, with Priority Button, Chairman unit number is unrestricted can join in any position in the conference.
84	Supply, Testing, and Commissioning of Delegate unit:-Wired Table Top unit, frequency response: 40 to 16 KHz, Sensitivity: -44dB+/-2dB, embedded installation and detachable microphone system, power supply for all the micrphones is provided by main unit, LED-red indicator shows the status of microphone, talk button with dual color LED light- Green Color-On, Red Color Talk, Daisy Chain on CAT 6.
85	Supply, Testing, and Commissioning of Digital Conference Controller- Conference Management Software, Conference system is controlled by software and centrally managing all aspects of the conference andmaking the operation easy and efficient.Active microphone limit (1/2/3/4) and speaking time limit. Three operations mode- Limit, FIFO, Apply mode. Built-in video tracking control and ballot processor, high definition switching matrix are availablefor auto video tracking with HD video matrix. Built-in USB, allowing the realizing of recording and monitoring. Ethernet, RS422 and RS232 to match up with different devices. Maximum Output Power: 350W, Frequency Response: 100Hz-15KHz, S/N: >96db, • T.H.D: 0.1%@1kHz.
86	Supply, Testing, and Commissioning of Ceiling-mount loudspeaker- Full range 2.25 inch transducer, Frequency Range (-10 dB): 83 – 19,000 Hz, Coverage, Horizontal: 150°, Maximum SPL at 1 m: 98 dB, Nominal Impedance: 16 Ω (transformer bypass), Power Handling, Continuous: 16 W, Sensitivity (SPL/1 W at 1 m): 86 dB, Transformer Taps, 100V: 2, 4, 8, 16 W, bypass, Coverage, Vertical: 150°
87	Supply, Testing, and Commissioning of 2 Channel Amplifier, Channel Separation (Crosstalk) ≤ -58 dBu below rated power, 1 kHz, Dynamic Range: 88 dB, Frequency Response: 55 Hz – 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference, Class D Amplifier, Rated Power, Symmetrical: 120 W per channel at 70V, 100V, THD+N: 0.3% at rated power, Channels: 2 unbalanced, line + 2 balanced, line + 1 balanced, mic/line (page) + 1 unbalanced, line (auxiliary), Audio Output Channels-2, Nominal Output Level: 2 × 120 W at 70V, 100V / 2 dBu (auxiliary)
88	Supply, Testing, and Commissioning of Digital Signal Processor, 4 balanced mic inputs, 2 balanced Mic/Line inputs and 1 stereo unbalanced input, 1 stereo and 2 mono outputs, 2-channel USB audio interface for soft codec (Skype, WebEx) integration or playback from computer, Full digital processing on inputs and outputs, 8 x 3 audio routing matrix, 6-channel Smart Mix (gate or gain sharing), Onboard acoustic echo canceler (AEC) processing, Front panel direct operation and Web Remote functionality, IP control for third-party CCS administration, Up to 6 mixers can be linked using Cat5e cable.
89	Video SystemSupply, Testing, and Commissioning of 86\"Professional Display, Size- 218.4 cm, Resolution (HxV): 3840(H)x2160(V), aspect ratio- 16:9, Back Light Unit -DLED, Brightness (typ): 500 cd/m², Viewing Angle: 178°, Display Orientation: Landscape & Portrait, Operation Time: 7 daysx24 hours, HDMI IN: 3 (HDMI 2.0), HDMI Output: 1 (HDMI Daisy chain,Up to 3*3), Audio Output: 1 x 3.5mm, USB 2.0: 1 (F/W update / Media Play), USB 3.0 :1 (F/W update / Media Play), RS232-1, LAN(RJ45): ((10M/100M/1000M))2(IN/OUT), USB Type-C: 1 (DP1.2,PD 65W,Network Sharing(100M)), Built in Speaker: 2x12 watt
90	Supply, Testing, and Commissioning of 65\"Professional Display, Size- 165 cm, Resolution (HxV): 3840(H)x2160(V), aspect ratio- 16:9, Back Light Unit -DLED, Brightness (typ): 500 cd/m², Display contrast- 4000:1 Viewing ang 178°（H）/178°（V）,Operation Time: 7 daysx24 hours ,Built -in WIFI: 2.4GHz/5GHz,HDMI IN: 3 (HDMI 2.0), Line Output: 1 x 3.5mm, RJ45: 1 x RJ45 (100/10Mbps), RS232: Yes, Speaker: 10W*2.
91	Supply, Testing, and Commissioning of Trolley for 65\" Display
92	Supply, Testing, and Commissioning of Video Conference System: Premium audio quality and voice clarity, Share content wirelessly from any device, VIDEO STANDARDS AND PROTOCOLS: H.264 AVC, H.264 High Profile, H.264 SVC, H.265, RTV, H.239, H.264 video error concealment, VIDEO INPUT: 1 x HDCI, 1 x HDMI, 1 x USB1, VIDEO OUT: 2x HDMI, Touch Display Compatible, People video resolution: 4K, 30 fps (TX & RX) from 2048 Kbps2, 1080p, 60 fps from 1740 Kbps, 1080p, 30 fps from 1024 Kbps, 720p, 60 fps from 832 Kbps, 720p, 30 fps from 512 Kbps, Content Video Resolution: Input: UHD (3840x2160), HD (1920x1080p), Output: UHD (3840 x 2160), WUXGA (1920 x 1200), Audio Input: Up to 3 1x IP Microphone Arrays, 1 x HDMI, 1 x 3.5 mm stereo line-in, Audio Output: 1x HDMI, 1 x 3.5 mm stereo line-out, Other Interfaces: 3x USB 3.0, 1x USB-C3, 1x RS-232, 8-pin mini-DIN, Bluetooth 5.0, WiFi 802.11a/b/g/n/ac (MIMO), Multichannel Concurrency, Audio standard protocols: 22 kHz bandwidth with Polycom Siren 22 technology, G.719 (M- Mode), 14 kHz bandwidth with Polycom Siren 14 technology, G.722.1 Annex C 7 kHz bandwidth with G.722, G.722.1, 3.4 kHz bandwidth with G.711, G.728, G.729A. Network: IPv4 support, 1 x 10/100/1G Ethernet, Auto-MDIX, 3x 10/100/1G LLN supporting POE+/PSE, H.323 and/or SIP up to 6Mbps
93	Supply, Testing, and Commissioning of Cable Cubby:-2 X power socket and 4 or more passthrough holes for HDMI and LAN connectivity.
94	Supply, Testing, and Commissioning of Matrix Switcher: 8x8 HDMI 2.0 Matrix Switcher, 4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, IR, RS232, & TCP/IP control, Analog and digital de-embedded audio outputs, Audio outputs can follow video or be routed independently, Built in web server control, Supports IR, RS232 and IP control, Manual DIP switch for EDID management, Web control features advanced independent EDID control for each HDMI input, Open telnet API for 3rd party control, Integrated re-clocking circuitry for maximum device compatibility (cable box, streaming players, and other devices).
95	Supply, Testing, and Commissioning of Wireless Presentation-Flexible, high-performing wireless presentation and Unified Communications (UC) platform, Wirelessly present from laptop, tablet or smartphone, Supports Bring Your Own Meeting with ScreenBeam Conference Technology, Easily integrates with existing UC Room solutions, Video H.264 compression, Audio LPCM 2.0, Resolution1 Up to 4K@30Hz, Ethernet 10/100/1000-BASE-T RJ-45 LANWireless Miracast and Local Wi-Fi Mode: 802.11ac dual-band 3x3 MIMONetwork Bridge: 802.11ac dual-band 2x2 MIMO, Authentication WPA-PSK (TKIP). Protocol WPA2-PSK (AES), PEAP-MSCHAP V2, EAP-TLS, Interfaces 1 x HDMI® Input 2 x USB 2.0 Host Type-A, 1 x HDMI® Output 1 x USB 3.0 Host Type-A, 1 x Analog 3.5mm audio Output 1 x DC Power Jack, Content Protection2 HDCP 2.x
96	Control SystemSupply, Testing, and Commissioning of Control Processor- Relay-Two relays configurable to NO, NC or COM,12V Out-Two 12V outputs programmable to turn on/off, momentary toggle Sensor.Four programmable sensor ports, compatible with all URC sensors, Network RJ45 10/100/1000 (gigabit) Ethernet port, IR Eight standard 3.5mm IR emitter ports with variable output level, RS-232 Four RS-232 Serial ports (TX, RX, GND), Indicator LEDs Power and Etherne
97	Supply, Testing, and Commissioning of Touch panel- Attractive, upscale design, Soft-touch finish, diamond polished metal accents 10” high-resolution touchscreen, Colorful, vivid images, menus, icons and backgrounds AV intercom works with all Total Control 2.0 touchscreens Live camera view from door stations and surveillance cameras, Night mode and proximity sensor
98	Supply, Testing, and Commissioning of 16-Port 10/100/1000T + 2-Port 1000X SFP Web Smart Ethernet Switch
99	Cabel and ConnectorsSupply, Testing, and Commissioning of 2 core Speaker Cable.
100	Supply, Testing, and Commissioning of two core sheilded Microphone / Control Cable.
101	Supply, Testing, and Commissioning ofcat6 cable
102	Supply, Testing, and Commissioning of 1.8m HDMI cable
103	Supply, Testing, and Commissioning of 10m HDMI cable
104	Supply, Testing, and Commissioning of 15m HDMI cable
105	Supply, Testing, and Commissioning of 12U Equipment Rack with PDU & two tray & floor wheels .
106	AUDIO VIDEO SYSTEM (classroom-1)Audio SystemSupply, Testing, and Commissioning of Wireless presenter System with lavelier Microphone, single channel receiver, bodypack transmitter, upto 300 feet range, Up to 12 compatible systems per frequency band (region dependent), One-touch QuickScan frequency selection quickly locates the best frequency, 1/4\" and XLR audio outputs.
107	Supply, Testing, and Commissioning of 4-Channel Microphone Mixer, Four transformer-balanced microphone inputs, Transformer-balanced output-switchable mic/line level, Five -10 dB line-level inputs, Six-segment LED output level meter, Built-in 12-volt phantom power, Internal power transformer, Built-in low-cut filter on microphone inputs (below 80 Hz)
108	Supply, Testing, and Commissioning of Mixer Amplifier, min. 80 watt, 2 input, single channel output, Channel Separation (Crosstalk) ≤ -60 dBV below rated power, 1 kHz, Dynamic Range: 88 dB, Frequency Response: 60 Hz – 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference, Number of Channels: 2, class D type, Rated Power, Symmetrical: 90 W at 70V, 100V, THD+N ≤ 1% at full rated power, Audio input Channels- 2 unbalanced, line + 1 balanced, mic/line + 1 balanced, mic (page) + 1 unbalanced, line (auxiliary).
109	Supply, Testing, and Commissioning of Ceiling-mount loudspeaker- Full range 2.25 inch transducer, Frequency Range (-10 dB): 83 – 19,000 Hz, Coverage, Horizontal: 150°, Maximum SPL at 1 m: 98 dB, Nominal Impedance: 16 Ω (transformer bypass), Power Handling, Continuous: 16 W, Sensitivity (SPL/1 W at 1 m): 86 dB, Transformer Taps, 100V: 2, 4, 8, 16 W, bypass, Coverage: Vertical: 150°
110	Video & Control SystemSupply, Testing, and Commissioning of 86\" Intractive Display, Screen Size: 218.4cm, Brightness (typical):450cd/m² Resolution: 3840 x 2160, Viewing Angle: 178 x 178, Surface Hardness: Toughened Glass with Level 7 of MOHS Standard, Operating System: Android 11, CPU: Octa core processor and with 2.2Ghz (A73×4 + A53×4) Memory: 8GB, Storage: 128, WiFi and Bluetooth: Wifi 802.11ac/b/g/n/a/ax, BT 5.2, Input Ports: 3 x HDMI (4K upto 60Hz), HDCP 2.1, CEC, ARC (HDMI1), 1 x USB 2.0, 4 x USB 3.0 (Front 2, Rear 2) with autoswitching function, 1 x USB (C Type) Touch, PD65W & LAN network sharing, 1 x Audio IN, Output Ports: Audio Port -1 (SPDIF), 1 x Audio out, 1 x HDMI Out /2 x Touch Out, External Control: RS-232, RJ 45. IR Receiver: Yes, Speakers Built in: 2×25W, Pen: 2 x Writing pens, Plug In: Yes, Type of Touch Technology: 40 touch points, Accuracy: ±1.5mm, Writing, Pen, Palm Eraser, Save, Screen Capture, Storage and Tool Bar. Supports 3rd party applications, recording feature, USB WEB Cam Compatible, Support PPT, Word, PDF, Image, Video Play, Built-in 48M camera, supports Android 4K photo & video,Auto framing, Built-in 8 array microphones, support intelligent noise reduction, sound localiza, Support 2.1 channel stereo
111	Supply, Testing, and Commissioning of 55\"Professional Display, Size- 139.7 cm, Resolution (HxV): 3840(H)x2160(V), aspect ratio- 16:9, Back Light Unit -DLED, Brightness (typ): 500 cd/m², Display contrast- 4000:1, Viewing angle: 178°（H）/178°（V）,Operation Time: 7 daysx24 hours ,Built -in WIFI: 2.4GHz/5GHz,HDMI IN: 3 (HDMI 2.0), Line Output: 1 x 3.5mm, RJ45: 1 x RJ45 (100/10Mbps), RS232: Yes, Speaker: 10W*2.
112	Supply, Testing, and Commissioning of Matrix Switcher: 4x4 HDMI 2.0 Matrix Switcher, 4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, IR, RS232, & TCP/IP control, Analog and digital de-embedded audio outputs, Audio outputs can follow video or be routed independently, Built in web server control, Supports IR, RS232 and IP control, Manual DIP switch for EDID management, Web control features advanced independent EDID control for each HDMI input, Open telnet API for 3rd party control, Integrated re-clocking circuitry for maximum device compatibility (cable box, streaming players, and other devices).
113	Supply, Testing, and Commissioning of Interactive podium- Digital podium which comes with a 21.5\" Sub Monitorprovision to place AV connectivity wall plate with Gooseneck Mic
114	Supply, Testing, and Commissioning of Control Processor- 3.5mm IR Emitter Ports: 6, RS-232 Serial Ports (TX, RX, GND): 2, Relays Configurable to NO, NC, or COM: 1, 12 Volt Outputs: 1,Programmable Sensor Ports: 2, Ethernet Port RJ45:10/100/1000 Gbps
115	Supply, Testing, and Commissioning of Touch panel-In-wall touch screen with 7” high-resolution color LCD, Sleek, premium design with matte black frame and sculpted metal side panels A/V intercom, camera, microphone and speaker, Ideal for door station and surveillance camera integration, Features Night Mode, Proximity Sensor, Rooms Menu and Power Menu, Installs in standard dual-gang wall box, powered through POE
116	Supply, Testing, and Commissioning of 4 port USB hub
117	Supply, Testing, and Commissioning of 8-Port 10/100/1000T 802.3at PoE + 2-Port 1000X SFP Web Smart Ethernet
118	Cable and ConnectorsSupply, Testing, and Commissioning of 2 core Speaker Cable.
119	Supply, Testing, and Commissioning of 1.8m HDMI cable
120	Supply, Testing, and Commissioning of 10m HDMI cable
121	Supply, Testing, and Commissioning of 15m HDMI cable
122	Supply, Testing, and Commissioning of USB Cable A to A 1.8 mtr
123	Supply, Testing, and Commissioning of USB Cable A to A 15 mtr
124	AUDIO VIDEO SYSTEM (classroom-2)Audio SystemSupply, Testing, and Commissioning of Wireless presenter System with lavelier Microphone, single channel receiver, bodypack transmitter, upto 300 feet range, Up to 12 compatible systems per frequency band (region dependent), One-touch QuickScan frequency selection quickly locates the best frequency, 1/4\" and XLR audio outputs.
125	Supply, Testing, and Commissioning of 4-Channel Microphone Mixer, Four transformer-balanced microphone inputs, Transformer-balanced output-switchable mic/line level, Five -10 dB line-level inputs, Six-segment LED output level meter, Built-in 12-volt phantom power, Internal power transformer, Built-in low-cut filter on microphone inputs (below 80 Hz)
126	Supply, Testing, and Commissioning of Mixer Amplifier, min. 80 watt, 2 input, single channel output, Channel Separation (Crosstalk) ≤ -60 dBV below rated power, 1 kHz, Dynamic Range: 88 dB, Frequency Response: 60 Hz – 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference, Number of Channels: 2, class D type, Rated Power, Symmetrical: 90 W at 70V, 100V, THD+N ≤ 1% at full rated power, Audio input Channels- 2 unbalanced, line + 1 balanced, mic/line + 1 balanced, mic (page) + 1 unbalanced, line (auxiliary).
127	Supply, Testing, and Commissioning of Ceiling-mount loudspeaker- Full range 2.25 inch transducer, Frequency Range (-10 dB): 83 – 19,000 Hz, Coverage, Horizontal: 150°, Maximum SPL at 1 m: 98 dB, Nominal Impedance: 16 Ω (transformer bypass), Power Handling, Continuous: 16 W, Sensitivity (SPL/1 W at 1 m): 86 dB, Transformer Taps, 100V: 2, 4, 8, 16 W, bypass, Coverage, Vertical: 150°
128	Video & Control SystemSupply, Testing, and Commissioning of 86\" Intractive Display, Screen Size: 218.4cm, Brightness (typical):450cd/m² Resolution: 3840 x 2160, Viewing Angle: 178 x 178, Surface Hardness: Toughened Glass with Level 7 of MOHS Standard, Operating System: Android 11, CPU: Octa core processor and with 2.2Ghz (A73×4 + A53×4) Memory: 8GB, Storage: 128, WiFi and Bluetooth: Wifi 802.11ac/b/g/n/a/ax, BT 5.2, Input Ports: 3 x HDMI (4K upto 60Hz), HDCP 2.1, CEC, ARC (HDMI1), 1 x USB 2.0, 4 x USB 3.0 (Front 2, Rear 2) with autoswitching function, 1 x USB (C Type) Touch, PD65W & LAN network sharing, 1 x Audio IN, Output Ports: Audio Port -1 (SPDIF), 1 x Audio out, 1 x HDMI Out /2 x Touch Out, External Control: RS-232, RJ 45. IR Receiver: Yes, Speakers Built in: 2×25W, Pen: 2 x Writing pens, Plug In: Yes, Type of Touch Technology: 40 touch points, Accuracy: ±1.5mm, Writing, Pen, Palm Eraser, Save, Screen Capture, Storage and Tool Bar. Supports 3rd party applications, recording feature, USB WEB Cam Compatible, Support PPT, Word, PDF, Image, Video Play, Built-in 48M camera, supports Android 4K photo & video,Auto framing, Built-in 8 array microphones, support intelligent noise reduction, sound localiza, Support 2.1 channel stereo
129	Supply, Testing, and Commissioning of 55\"Professional Display, Size- 139.7 cm, Resolution (HxV): 3840(H)x2160(V), aspect ratio- 16:9, Back Light Unit -DLED, Brightness (typ): 500 cd/m², Display contrast- 4000:1, Viewing angle: 178°（H）/178°（V）,Operation Time: 7 daysx24 hours ,Built -in WIFI: 2.4GHz/5GHz,HDMI IN: 3 (HDMI 2.0), Line Output: 1 x 3.5mm, RJ45: 1 x RJ45 (100/10Mbps), RS232: Yes, Speaker: 10W*2.
130	Supply, Testing, and Commissioning of Matrix Switcher: 4x4 HDMI 2.0 Matrix Switcher, 4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, IR, RS232, & TCP/IP control, Analog and digital de-embedded audio outputs, Audio outputs can follow video or be routed independently, Built in web server control, Supports IR, RS232 and IP control, Manual DIP switch for EDID management, Web control features advanced independent EDID control for each HDMI input, Open telnet API for 3rd party control, Integrated re-clocking circuitry for maximum device compatibility (cable box, streaming players, and other devices).
131	Supply, Testing, and Commissioning of Interactive podium- Digital podium which comes with a 21.5\" Sub Monitorprovision to place AV connectivity wall plate with Gooseneck Mic
132	Supply, Testing, and Commissioning of Control Processor- 3.5mm IR Emitter Ports: 6, RS-232 Serial Ports (TX, RX, GND): 2, Relays Configurable to NO, NC, or COM: 1, 12 Volt Outputs: 1,Programmable Sensor Ports: 2, Ethernet Port RJ45:10/100/1000 Gbps
133	Supply, Testing, and Commissioning of Touch panel-In-wall touch screen with 7” high-resolution color LCD, Sleek, premium design with matte black frame and sculpted metal side panels A/V intercom, camera, microphone and speaker, Ideal for door station and surveillance camera integration, Features Night Mode, Proximity Sensor, Rooms Menu and Power Menu, Installs in standard dual-gang wall box, powered through POE
134	Supply, Testing, and Commissioning of 4 port USB hub
135	Supply, Testing, and Commissioning of 8-Port 10/100/1000T 802.3at PoE + 2-Port 1000X SFP Web Smart Ethernet
136	Cable and ConnectorsSupply, Testing, and Commissioning of 2 core Speaker Cable.
137	Supply, Testing, and Commissioning of 1.8m HDMI cable
138	Supply, Testing, and Commissioning of 10m HDMI cable
139	Supply, Testing, and Commissioning of 15m HDMI cable
140	Supply, Testing, and Commissioning of USB Cable A to A 1.8 mtr
141	Supply, Testing, and Commissioning of USB Cable A to A 15 mtr
142	AUDIO VIDEO SYSTEM (classroom-3)Audio SystemSupply, Testing, and Commissioning of Wireless presenter System with lavelier Microphone, single channel receiver, bodypack transmitter, upto 300 feet range, Up to 12 compatible systems per frequency band (region dependent), One-touch QuickScan frequency selection quickly locates the best frequency, 1/4\" and XLR audio outputs.
143	Supply, Testing, and Commissioning of 4-Channel Microphone Mixer, Four transformer-balanced microphone inputs, Transformer-balanced output-switchable mic/line level, Five -10 dB line-level inputs, Six-segment LED output level meter, Built-in 12-volt phantom power, Internal power transformer, Built-in low-cut filter on microphone inputs (below 80 Hz)
144	Supply, Testing, and Commissioning of Mixer Amplifier, min. 80 watt, 2 input, single channel output, Channel Separation (Crosstalk) ≤ -60 dBV below rated power, 1 kHz, Dynamic Range: 88 dB, Frequency Response: 60 Hz – 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference, Number of Channels: 2, class D type, Rated Power, Symmetrical: 90 W at 70V, 100V, THD+N ≤ 1% at full rated power, Audio input Channels- 2 unbalanced, line + 1 balanced, mic/line + 1 balanced, mic (page) + 1 unbalanced, line (auxiliary).
145	Supply, Testing, and Commissioning of Ceiling-mount loudspeaker- Full range 2.25 inch transducer, Frequency Range (-10 dB): 83 – 19,000 Hz, Coverage, Horizontal: 150°, Maximum SPL at 1 m: 98 dB, Nominal Impedance: 16 Ω (transformer bypass), Power Handling, Continuous: 16 W, Sensitivity (SPL/1 W at 1 m): 86 dB, Transformer Taps, 100V: 2, 4, 8, 16 W, bypass, Coverage, Vertical: 150°
146	Video & Control SystemSupply, Testing, and Commissioning of 86\" Intractive Display, Screen Size: 218.4cm, Brightness (typical):450cd/m² Resolution: 3840 x 2160, Viewing Angle: 178 x 178, Surface Hardness: Toughened Glass with Level 7 of MOHS Standard, Operating System: Android 11, CPU: Octa core processor and with 2.2Ghz (A73×4 + A53×4) Memory: 8GB, Storage: 128, WiFi and Bluetooth: Wifi 802.11ac/b/g/n/a/ax, BT 5.2, Input Ports: 3 x HDMI (4K upto 60Hz), HDCP 2.1, CEC, ARC (HDMI1), 1 x USB 2.0, 4 x USB 3.0 (Front 2, Rear 2) with autoswitching function, 1 x USB (C Type) Touch, PD65W & LAN network sharing, 1 x Audio IN, Output Ports: Audio Port -1 (SPDIF), 1 x Audio out, 1 x HDMI Out /2 x Touch Out, External Control: RS-232, RJ 45. IR Receiver: Yes, Speakers Built in: 2×25W, Pen: 2 x Writing pens, Plug In: Yes, Type of Touch Technology: 40 touch points, Accuracy: ±1.5mm, Writing, Pen, Palm Eraser, Save, Screen Capture, Storage and Tool Bar. Supports 3rd party applications, recording feature, USB WEB Cam Compatible, Support PPT, Word, PDF, Image, Video Play, Built-in 48M camera, supports Android 4K photo & video,Auto framing, Built-in 8 array microphones, support intelligent noise reduction, sound localiza, Support 2.1 channel stereo
147	Supply, Testing, and Commissioning of Matrix Switcher: 4x4 HDMI 2.0 Matrix Switcher, 4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, IR, RS232, & TCP/IP control, Analog and digital de-embedded audio outputs, Audio outputs can follow video or be routed independently, Built in web server control, Supports IR, RS232 and IP control, Manual DIP switch for EDID management, Web control features advanced independent EDID control for each HDMI input, Open telnet API for 3rd party control, Integrated re-clocking circuitry for maximum device compatibility (cable box, streaming players, and other devices).
148	Supply, Testing, and Commissioning of Interactive podium- Digital podium which comes with a 21.5\" Sub Monitorprovision to place AV connectivity wall plate with Gooseneck Mic
149	Supply, Testing, and Commissioning of Control Processor- 3.5mm IR Emitter Ports: 6, RS-232 Serial Ports (TX, RX, GND): 2, Relays Configurable to NO, NC, or COM: 1, 12 Volt Outputs: 1,Programmable Sensor Ports: 2, Ethernet Port RJ45:10/100/1000 Gbps
150	Supply, Testing, and Commissioning of Touch panel-In-wall touch screen with 7” high-resolution color LCD, Sleek, premium design with matte black frame and sculpted metal side panels A/V intercom, camera, microphone and speaker, Ideal for door station and surveillance camera integration, Features Night Mode, Proximity Sensor, Rooms Menu and Power Menu, Installs in standard dual-gang wall box, powered through POE
151	Supply, Testing, and Commissioning of 4 port USB hub
152	Supply, Testing, and Commissioning of 8-Port 10/100/1000T 802.3at PoE + 2-Port 1000X SFP Web Smart Ethernet
153	Cable and ConnectorsSupply, Testing, and Commissioning of 2 core Speaker Cable.
154	Supply, Testing, and Commissioning of 1.8m HDMI cable
155	Supply, Testing, and Commissioning of 15m HDMI cable
156	Supply, Testing, and Commissioning of USB Cable A to A 1.8 mtr
157	Supply, Testing, and Commissioning of USB Cable A to A 15 mtr
158	Audio Video System (Meeting Room)Audio SystemSupply, Testing, and Commissioning of Chairman unit:-Wired Table Top unit, frequency response: 40 to 16 KHz, Sensitivity: -44dB+/-2dB, embedded installation and detachable microphone system, power supply for all the micrphones is provided by main unit, LED-red indicator shows the status of microphone, talk button with dual color LED light- Green Color-On, Red Color Talk, Daisy Chain on CAT 6, with Priority Button, Chairman unit number is unrestricted can join in any position in the conference.
159	Supply, Testing, and Commissioning of Delegate unit:-Wired Table Top unit, frequency response: 40 to 16 KHz, Sensitivity: -44dB+/-2dB, embedded installation and detachable microphone system, power supply for all the micrphones is provided by main unit, LED-red indicator shows the status of microphone, talk button with dual color LED light- Green Color-On, Red Color Talk, Daisy Chain on CAT 6
160	Supply, Testing, and Commissioning of Digital Conference Controller- Conference Management Software, Conference system is controlled by software and centrally managing all aspects of the conference andmaking the operation easy and efficient.Active microphone limit (1/2/3/4) and speaking time limit. Three operations mode- Limit, FIFO, Apply mode. Built-in video tracking control and ballot processor, high definition switching matrix are availablefor auto video tracking with HD video matrix. Built-in USB, allowing the realizing of recording and monitoring. Ethernet, RS422 and RS232 to match up with different devices. Maximum Output Power: 350W, Frequency Response: 100Hz-15KHz, S/N: >96db, • T.H.D: 0.1%@1kHz.
161	Supply, Testing, and Commissioning of Ceiling-mount loudspeaker- Full range 2.25 inch transducer, Frequency Range (-10 dB): 83 – 19,000 Hz, Coverage, Horizontal: 150°, Maximum SPL at 1 m: 98 dB, Nominal Impedance: 16 Ω (transformer bypass), Power Handling, Continuous: 16 W, Sensitivity (SPL/1 W at 1 m): 86 dB, Transformer Taps, 100V: 2, 4, 8, 16 W, bypass, Coverage, Vertical: 150°
162	Supply, Testing, and Commissioning of Mixer Amplifier, min. 80 watt, 2 input, single channel output, Channel Separation (Crosstalk) ≤ -60 dBV below rated power, 1 kHz, Dynamic Range: 88 dB, Frequency Response: 60 Hz – 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference, Number of Channels: 2, class D type, Rated Power, Symmetrical: 90 W at 70V, 100V, THD+N ≤ 1% at full rated power, Audio input Channels- 2 unbalanced, line + 1 balanced, mic/line + 1 balanced, mic (page) + 1 unbalanced, line (auxiliary).
163	Supply, Testing, and Commissioning of Digital Signal Processor, 4 balanced mic inputs, 2 balanced Mic/Line inputs and 1 stereo unbalanced input, 1 stereo and 2 mono outputs, 2-channel USB audio interface for soft codec (Skype, WebEx) integration or playback from computer, Full digital processing on inputs and outputs, 8 x 3 audio routing matrix, 6-channel Smart Mix (gate or gain sharing), Onboard acoustic echo canceler (AEC) processing, Front panel direct operation and Web Remote functionality, IP control for third-party CCS administration, Up to 6 mixers can be linked using Cat5e cable.
164	Video SystemSupply, Testing, and Commissioning of 55\"Professional Display, Size- 139.7 cm, Resolution (HxV): 3840(H)x2160(V), aspect ratio- 16:9, Back Light Unit -DLED, Brightness (typ): 500 cd/m², PIXEL PITCH: 429.6(H) ×429.6(V), Viewing angle: 178x178,Operation Time: 7 daysx24 hours ,Built -in WIFI: 2.4GHz/5GHz,HDMI IN: 3 (HDMI 2.0), Line Output: 1 x 3.5mm, RJ45: 1 x RJ45 (100/10Mbps), RS232: Yes, Speaker: 10W*2.
165	Supply, Testing, and Commissioning of 75\"Professional Display, SCREEN SIZE: 189.3 cm diagonal, ASPECT RATIO: 16:9, RESOLUTION 38402160（UHD), DISPLAY AREA(H x V): 1649.664(H) × 927.936(V), PIXEL PITCH: 429.6(H) ×429.6(V), VIEWING ANGLE (HORIZONTAL / VERTICAL): 178°(H)/178°(V)((Typ.), DISPLAY COLOURS: 1.07G, RF IN: 1Side, AV IN: miniAV 1Side, USB INPUT (2.0 SUPPORT): 2Side（USB2.0, HDMI INPUT 3Side, SPDIF OUT YES, RJ-45-1Side, USB DEVICE SUPPORT-FAT16/FAT32/ NTFS(Read only), built in speaker- 10+10 watt
166	Supply, Testing, and Commissioning of Video Conference System: Premium audio quality and voice clarity, Share content wirelessly from any device, VIDEO STANDARDS AND PROTOCOLS: H.264 AVC, H.264 High Profile, H.264 SVC, H.265, RTV, H.239, H.264 video error concealment, VIDEO INPUT: 1 x HDCI, 1 x HDMI, 1 x USB1, VIDEO OUT: 2x HDMI, Touch Display Compatible, People video resolution: 4K, 30 fps (TX & RX) from 2048 Kbps2, 1080p, 60 fps from 1740 Kbps, 1080p, 30 fps from 1024 Kbps, 720p, 60 fps from 832 Kbps, 720p, 30 fps from 512 Kbps, Content Video Resolution: Input: UHD (3840x2160), HD (1920x1080p), Output: UHD (3840 x 2160), WUXGA (1920 x 1200), Audio Input: Up to 3 1x IP Microphone Arrays, 1 x HDMI, 1 x 3.5 mm stereo line-in, Audio Output: 1x HDMI, 1 x 3.5 mm stereo line-out, Other Interfaces: 3x USB 3.0, 1x USB-C3, 1x RS-232, 8-pin mini-DIN, Bluetooth 5.0, WiFi 802.11a/b/g/n/ac (MIMO), Multichannel Concurrency, Audio standard protocols: 22 kHz bandwidth with Polycom Siren 22 technology, G.719 (M- Mode), 14 kHz bandwidth with Polycom Siren 14 technology, G.722.1 Annex C 7 kHz bandwidth with G.722, G.722.1, 3.4 kHz bandwidth with G.711, G.728, G.729A. Network: IPv4 support, 1 x 10/100/1G Ethernet, Auto-MDIX, 3x 10/100/1G LLN supporting POE+/PSE, H.323 and/or SIP up to 6Mbps
167	Supply, Testing, and Commissioning of PTZ Camera- Mechanical Pan/Tilt/Zoom: 12x optical zoom with pan range ±170° and tilt ±30°. LED lights: LED for standby and power.AI lens: Enables automatic tracking and framing, within 107° HFOV, Remote Control
168	Supply, Testing, and Commissioning of Cable Cubby:-2 X power socket and 4 or more passthrough holes for HDMI and LAN connectivity.
169	Supply, Testing, and Commissioning of Matrix Switcher: 8x8 HDMI 2.0 Matrix Switcher, 4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, IR, RS232, & TCP/IP control, Analog and digital de-embedded audio outputs, Audio outputs can follow video or be routed independently, Built in web server control, Supports IR, RS232 and IP control, Manual DIP switch for EDID management, Web control features advanced independent EDID control for each HDMI input, Open telnet API for 3rd party control, Integrated re-clocking circuitry for maximum device compatibility (cable box, streaming players, and other devices).
170	Supply, Testing, and Commissioning of Wireless Presentation-Flexible, high-performing wireless presentation and Unified Communications (UC) platform, Wirelessly present from laptop, tablet or smartphone, Supports Bring Your Own Meeting with ScreenBeam Conference Technology, Easily integrates with existing UC Room solutions, Video H.264 compression, Audio LPCM 2.0, Resolution1 Up to 4K@30Hz, Ethernet 10/100/1000-BASE-T RJ-45 LANWireless Miracast and Local Wi-Fi Mode: 802.11ac dual-band 3x3 MIMONetwork Bridge: 802.11ac dual-band 2x2 MIMO, Authentication WPA-PSK (TKIP). Protocol WPA2-PSK (AES), PEAP-MSCHAP V2, EAP-TLS, Interfaces 1 x HDMI® Input 2 x USB 2.0 Host Type-A, 1 x HDMI® Output 1 x USB 3.0 Host Type-A, 1 x Analog 3.5mm audio Output 1 x DC Power Jack, Content Protection2 HDCP 2.x
171	Control SystemSupply, Testing, and Commissioning of Control Processor- Relay-Two relays configurable to NO, NC or COM,12V Out-Two 12V outputs programmable to turn on/off, momentary toggle Sensor.Four programmable sensor ports, compatible with all URC sensors, Network RJ45 10/100/1000 (gigabit) Ethernet port, IR Eight standard 3.5mm IR emitter ports with variable output level, RS-232 Four RS-232 Serial ports (TX, RX, GND), Indicator LEDs Power and Etherne
172	Supply, Testing, and Commissioning of Touch panel- Attractive, upscale design, Soft-touch finish, diamond polished metal accents 10” high-resolution touchscreen, Colorful, vivid images, menus, icons and backgrounds AV intercom works with all Total Control 2.0 touchscreens Live camera view from door stations and surveillance cameras, Night mode and proximity sensor
173	Cables and ConnectorsSupply, Testing, and Commissioning of 16-Port 10/100/1000T + 2-Port 1000X SFP Web Smart Ethernet Switch
174	Supply, Testing, and Commissioning of 2 core Speaker Cable.
175	Supply, Testing, and Commissioning of 22-24 AWG two core sheilded Microphone / Control Cable.
176	Supply, Testing, and Commissioning of cat6 cable
177	Supply, Testing, and Commissioning of 1.8m HDMI cable
178	Supply, Testing, and Commissioning of 15m HDMI cable
179	Supply, Testing, and Commissioning of 12U Equipment Rack with PDU & two tray & floor wheels .
180	Audio Video System (Briefing Hall)Audio SystemSupply, Testing, and Commissioning of Dual Channel Wireless handheld mic,upto 300 feet range, Up to 12 compatible systems per frequency band (region dependent), One-touch QuickScan frequency selection quickly locates the best frequency, 1/4\" and XLR audio outputs.
181	Supply, Testing, and Commissioning of Wireless presenter System with lavelier Microphone, single channel receiver, bodypack transmitter, upto 300 feet range, Up to 12 compatible systems per frequency band (region dependent), One-touch QuickScan frequency selection quickly locates the best frequency, 1/4\" and XLR audio outputs.
182	Supply, Testing, and Commissioning of 4-Channel Microphone Mixer, Four transformer-balanced microphone inputs, Transformer-balanced output-switchable mic/line level, Five -10 dB line-level inputs, Six-segment LED output level meter, Built-in 12-volt phantom power, Internal power transformer, Built-in low-cut filter on microphone inputs (below 80 Hz)
183	Supply, Testing, and Commissioning of Mixer Amplifier, min. 80 watt, 2 input, single channel output, Channel Separation (Crosstalk) ≤ -60 dBV below rated power, 1 kHz, Dynamic Range: 88 dB, Frequency Response: 60 Hz – 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference, Number of Channels: 2, class D type, Rated Power, Symmetrical: 90 W at 70V, 100V, THD+N ≤ 1% at full rated power, Audio input Channels- 2 unbalanced, line + 1 balanced, mic/line + 1 balanced, mic (page) + 1 unbalanced, line (auxiliary).
184	Supply, Testing, and Commissioning of Ceiling-mount loudspeaker- Full range 2.25 inch transducer, Frequency Range (-10 dB): 83 – 19,000 Hz, Coverage, Horizontal: 150°, Maximum SPL at 1 m: 98 dB, Nominal Impedance: 16 Ω (transformer bypass), Power Handling, Continuous: 16 W, Sensitivity (SPL/1 W at 1 m): 86 dB, Transformer Taps, 100V: 2, 4, 8, 16 W, bypass, Coverage, Vertical: 150°
185	Video & Control SystemSupply, Testing, and Commissioning of 86\" Intractive Display, Screen Size: 218.4cm, Brightness (typical):450cd/m² Resolution: 3840 x 2160, Viewing Angle: 178 x 178, Surface Hardness: Toughened Glass with Level 7 of MOHS Standard, Operating System: Android 11, CPU: Octa core processor and with 2.2Ghz (A73×4 + A53×4) Memory: 8GB, Storage: 128, WiFi and Bluetooth: Wifi 802.11ac/b/g/n/a/ax, BT 5.2, Input Ports: 3 x HDMI (4K upto 60Hz), HDCP 2.1, CEC, ARC (HDMI1), 1 x USB 2.0, 4 x USB 3.0 (Front 2, Rear 2) with autoswitching function, 1 x USB (C Type) Touch, PD65W & LAN network sharing, 1 x Audio IN, Output Ports: Audio Port -1 (SPDIF), 1 x Audio out, 1 x HDMI Out /2 x Touch Out, External Control: RS-232, RJ 45. IR Receiver: Yes, Speakers Built in: 2×25W, Pen: 2 x Writing pens, Plug In: Yes, Type of Touch Technology: 40 touch points, Accuracy: ±1.5mm, Writing, Pen, Palm Eraser, Save, Screen Capture, Storage and Tool Bar. Supports 3rd party applications, recording feature, USB WEB Cam Compatible, Support PPT, Word, PDF, Image, Video Play, Built-in 48M camera, supports Android 4K photo & video,Auto framing, Built-in 8 array microphones, support intelligent noise reduction, sound localiza, Support 2.1 channel stereo
186	Supply, Testing, and Commissioning of 55\"Professional Display, Size- 139.7 cm, Resolution (HxV): 3840(H)x2160(V), aspect ratio- 16:9, Back Light Unit -DLED, Brightness (typ): 500 cd/m², Display contrast- 4000:1, Viewing angle: 178°（H）/178°（V）,Operation Time: 7 daysx24 hours ,Built -in WIFI: 2.4GHz/5GHz,HDMI IN: 3 (HDMI 2.0), Line Output: 1 x 3.5mm, RJ45: 1 x RJ45 (100/10Mbps), RS232: Yes, Speaker: 10W*2.
187	Supply, Testing, and Commissioning of Ceiling mount for 55\" Display
188	Supply, Testing, and Commissioning of Matrix Switcher: 4x4 HDMI 2.0 Matrix Switcher, 4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, IR, RS232, & TCP/IP control, Analog and digital de-embedded audio outputs, Audio outputs can follow video or be routed independently, Built in web server control, Supports IR, RS232 and IP control, Manual DIP switch for EDID management, Web control features advanced independent EDID control for each HDMI input, Open telnet API for 3rd party control, Integrated re-clocking circuitry for maximum device compatibility (cable box, streaming players, and other devices).
189	Supply, Testing, and Commissioning of Interactive podium- Digital podium which comes with a 21.5\" Sub Monitorprovision to place AV connectivity wall plate with Gooseneck Mic
190	Supply, Testing, and Commissioning of Control Processor- 3.5mm IR Emitter Ports: 6, RS-232 Serial Ports (TX, RX, GND): 2, Relays Configurable to NO, NC, or COM: 1, 12 Volt Outputs: 1,Programmable Sensor Ports: 2, Ethernet Port RJ45:10/100/1000 Gbps
191	Supply, Testing, and Commissioning of Touch panel-In-wall touch screen with 7” high-resolution color LCD, Sleek, premium design with matte black frame and sculpted metal side panels A/V intercom, camera, microphone and speaker, Ideal for door station and surveillance camera integration, Features Night Mode, Proximity Sensor, Rooms Menu and Power Menu, Installs in standard dual-gang wall box, powered through POE
192	Supply, Testing, and Commissioning of 4 port USB hub
193	Supply, Testing, and Commissioning of 8-Port 10/100/1000T 802.3at PoE + 2-Port 1000X SFP Web Smart Ethernet
194	Cable and ConnectorsSupply, Testing, and Commissioning of 2 core Speaker Cable.
195	Supply, Testing, and Commissioning of 1.8m HDMI cable
196	Supply, Testing, and Commissioning of 10m HDMI cable
197	Supply, Testing, and Commissioning of 20m HDMI cable
198	Supply, Testing, and Commissioning of USB Cable A to A 1.8 mtr
199	Supply, Testing, and Commissioning of USB Cable A to A 10 mtr
200	Audio Video System (Lecture Hall)Audio SystemSupply, Testing, and Commissioning of Dual Channel Wireless handheld mic,upto 300 feet range, Up to 12 compatible systems per frequency band (region dependent), One-touch QuickScan frequency selection quickly locates the best frequency, 1/4\" and XLR audio outputs.
201	Supply, Testing, and Commissioning of Wireless presenter System with lavelier Microphone, single channel receiver, bodypack transmitter, upto 300 feet range, Up to 12 compatible systems per frequency band (region dependent), One-touch QuickScan frequency selection quickly locates the best frequency, 1/4\" and XLR audio outputs.
202	Supply, Testing, and Commissioning of 4-Channel Microphone Mixer, Four transformer-balanced microphone inputs, Transformer-balanced output-switchable mic/line level, Five -10 dB line-level inputs, Six-segment LED output level meter, Built-in 12-volt phantom power, Internal power transformer, Built-in low-cut filter on microphone inputs (below 80 Hz)
203	Supply, Testing, and Commissioning of 2 Channel Amplifier, Channel Separation (Crosstalk) ≤ -58 dBu below rated power, 1 kHz, Dynamic Range: 88 dB, Frequency Response: 55 Hz – 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference, Class D Amplifier, Rated Power, Symmetrical: 120 W per channel at 70V, 100V, THD+N: 0.3% at rated power, Channels: 2 unbalanced, line + 2 balanced, line + 1 balanced, mic/line (page) + 1 unbalanced, line (auxiliary), Audio Output Channels-2, Nominal Output Level: 2 × 120 W at 70V, 100V / 2 dBu (auxiliary)
204	Supply, Testing, and Commissioning of Ceiling-mount loudspeaker- Full range 2.25 inch transducer, Frequency Range (-10 dB): 83 – 19,000 Hz, Coverage, Horizontal: 150°, Maximum SPL at 1 m: 98 dB, Nominal Impedance: 16 Ω (transformer bypass), Power Handling, Continuous: 16 W, Sensitivity (SPL/1 W at 1 m): 86 dB, Transformer Taps, 100V: 2, 4, 8, 16 W, bypass, Coverage, Vertical: 150°
205	Video & Control SystemSupply, Testing, and Commissioning of Projector- LCD Projector, 16:10 aspect ratio, pixels- 2304000 (1920x1200) pixels x 3, light source-laser diode, 8000 lumens, resolution- WUXGA (1920x1200), Contrast Ratio: 3000000:1, lens- short zoom lens, HDMI IN, Computer IN, Monitor Out, Serial/Multi Sync IN, Audio IN/OUT.
206	Supply, Testing, and Commissioning of Ceiling mount for Projector
207	Supply, Testing, and Commissioning of Motorized Screen-Size:diagonal 100\", Modern Minimalist Design. Fully Enclosed casing. Screwlessend caps, patented spring - sealed system withLimiter for over retraction. Fiber Glass Fabric. Gain 1.0.Motor : TubularMotor.All Motorized Screens are equipped withRF / IR remote control.(Any one you can choose.) Viewing angle : 160 °.
208	Supply, Testing, and Commissioning of 55\"Professional Display, Size- 139.7 cm, Resolution (HxV): 3840(H)x2160(V), aspect ratio- 16:9, Back Light Unit -DLED, Brightness (typ): 500 cd/m², Display contrast- 4000:1, Viewing angle: 178°（H）/178°（V）,Operation Time: 7 daysx24 hours ,Built -in WIFI: 2.4GHz/5GHz,HDMI IN: 3 (HDMI 2.0), Line Output: 1 x 3.5mm, RJ45: 1 x RJ45 (100/10Mbps), RS232: Yes, Speaker: 10W*2.
209	Supply, Testing, and Commissioning of Ceiling mount for 55\" Display
210	Supply, Testing, and Commissioning of Matrix Switcher: 4x4 HDMI 2.0 Matrix Switcher, 4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, IR, RS232, & TCP/IP control, Analog and digital de-embedded audio outputs, Audio outputs can follow video or be routed independently, Built in web server control, Supports IR, RS232 and IP control, Manual DIP switch for EDID management, Web control features advanced independent EDID control for each HDMI input, Open telnet API for 3rd party control, Integrated re-clocking circuitry for maximum device compatibility (cable box, streaming players, and other devices).
211	Supply, Testing, and Commissioning of 1x4 HDMI 2.0 Splitter / DA, 18G 4K60 4:4:4 1x4 HDMI splitter with auto down scaling, Each output can independently support automatic down‐scaling from 4K to 1080P, Supports multiple HDR formats including HDR10 and Dolby Vision, Supports PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS‐HD Master Audio and DTS:X audio formats, Input/output HDMI cable length up to 15m for 1080p, 10m for 4K@30Hz and 5m for 4K@60Hz
212	Supply, Testing, and Commissioning of Interactive podium- Digital podium which comes with a 21.5\" Sub Monitorprovision to place AV connectivity wall plate with Gooseneck Mic
213	Supply, Testing, and Commissioning of Control Processor- 3.5mm IR Emitter Ports: 6, RS-232 Serial Ports (TX, RX, GND): 2, Relays Configurable to NO, NC, or COM: 1, 12 Volt Outputs: 1,Programmable Sensor Ports: 2, Ethernet Port RJ45:10/100/1000 Gbps
214	Touch panel-In-wall touch screen with 7” high-resolution color LCD, Sleek, premium design with matte black frame and sculpted metal side panels A/V intercom, camera, microphone and speaker, Ideal for door station and surveillance camera integration, Features Night Mode, Proximity Sensor, Rooms Menu and Power Menu, Installs in standard dual-gang wall box, powered through POE
215	Supply, Testing, and Commissioning of 8-Port 10/100/1000T 802.3at PoE + 2-Port 1000X SFP Web Smart Ethernet
216	Cable and ConnectorsSupply, Testing, and Commissioning of 2 core Speaker Cable.
217	Supply, Testing, and Commissioning of cat6 cable
218	Supply, Testing, and Commissioning of 1.8m HDMI cable
219	Supply, Testing, and Commissioning of 10m HDMI cable
220	Supply, Testing, and Commissioning of USB Cable A to A 1.8 mtr
221	Supply, Testing, and Commissioning of USB Cable A to A 10 mtr
222	Supply, Testing, and Commissioning of USB Hub
223	AuditoriumAudio and Microphone SystemSupply, Testing, and Commissioning of Loud speaker for FOH ( Left & right ), Frequency Range (-10 dB): 60 Hz – 20,000 Hz, Coverage, Horizontal: 110°, Maximum SPL at 1 m: 121 dB continuous, 131 dB peak, both passive & bi-amp averaged, Nominal Impedance: 8 Ω, passive; 8 Ω (low frequency) + 8 Ω (high frequency), bi-amp, Power Handling, Continuous: 300 W, passive; 300 W (low frequency) + 45 W (high frequency), bi-amp, Power Handling, Peak: 2800 W, passive; 2800 W (low frequency) + 720 W (high frequency), bi-amp, Sensitivity (SPL/1 W at 1 m): 96 dB, passive & bi-amp averaged, Coverage, Vertical: 60°, High-Frequency Transducer Quantity and Size: 1 × 3 in (76 mm compression driver Low-Frequency Transducer Quantity and Size: 1 × 12 in (305 mm) woofer
224	Supply, Testing, and Commissioning of Mounting/ Hanging arrangements for the above FOH loudspeaker
225	Supply, Testing, and Commissioning of Loudspeaker for delay fill - Left & right, Frequency Range (-10 dB): 75 Hz – 20,000 Hz, Coverage, Horizontal: 110°, Maximum SPL at 1 m: 116 dB continuous, 128 dB peak, Nominal Impedance: 8 Ω, passive,Power Handling, Continuous: 150 W, Power Handling, Peak: 2400 W, Sensitivity (SPL/1 W at 1 m): 94 dB, Coverage, Vertical: 60°, High-Frequency Transducer Quantity and Size: 1 × 1.7 in (43 mm compression driver Low-Frequency Transducer Quantity and Size: 1 × 8 in (203 mm) woofer
226	Supply, Testing, and Commissioning of Mounting/ Hanging arrangements for the above Delay loudspeaker
227	Supply, Testing, and Commissioning of Loudspeaker for Front Fill, Frequency Range (-10 dB): 90 Hz – 16,000 Hz, Coverage, Horizontal: 100°, Maximum SPL at 1 m: 110 dB free field, 112 dB wall/ceiling, Nominal Impedance: 8 Ω,Power Handling, Continuous: 100 W, Power Handling, Peak: 400 W, Sensitivity (SPL/1 W at 1 m): 90 dB, Coverage, Vertical: 100°, Transformer Taps, 100V: 10, 20, 40, 80 W, Tranducer Quantity and Size: High frequency: 1x2 in, Low Frequency: 1x5.25 inch.
228	Supply, Testing, and Commissioning of 15 inch Sub woofer, Frequency Range (-10 dB): 35 Hz – 130 Hz, Coverage, Horizontal: Omnidirectional, Maximum SPL at 1 m: 117 dB (free field), 123 dB (half-space) continuous / 124 dB (free field), 130 dB (half-space) peak, Nominal Impedance: 8 Ω, Power Handling, Continuous: 500 W, Power Handling, Peak: 2800 W, Sensitivity (SPL/1 W at 1 m): 90 dB (free field), 96 dB (half-space), Coverage, Vertical: Omnidirectional, Low-Frequency Transducer Quantity and Size: 1 × 15 in (381 mm) high-excursion woofer
229	Supply, Testing, and Commissioning of Ceiling-mount loudspeaker- Full range 2.25 inch transducer, Frequency Range (-10 dB): 83 – 19,000 Hz, Coverage, Horizontal: 150°, Maximum SPL at 1 m: 98 dB, Nominal Impedance: 16 Ω (transformer bypass), Power Handling, Continuous: 16 W, Sensitivity (SPL/1 W at 1 m): 86 dB, Transformer Taps, 100V: 2, 4, 8, 16 W, bypass, Coverage, Vertical: 150°
230	Supply, Testing, and Commissioning of Studio Monitor to be used in control room for monitoring the Audiotorium sound.
231	Supply, Testing, and Commissioning of Amplifier for FOH Speaker & Subwoofers, Channel Separation (Crosstalk): -70 dB typical at 1 kHz, Frequency Response: 20 Hz – 20 kHz (±1.0 dB), 1 W at 8 Ω, Gain, Low-Impedance: 26 dB, 29 dB, 32 dB, 35 dB, selectable, Maximum Peak Power, Asymmetrical: 2200 W at 2 Ω, 4 Ω, 8 Ω, 70V, 100V, Maximum Peak Power, Symmetrical: 800 W at 2 Ω / 600 W at 4 Ω, 8 Ω, 70V, 100V, Number of Channels: 4, class D type, Rated Power, Asymmetrical: 1100 W at 2 Ω / 1100 W at 4 Ω in 70V mode / 1100 W at 8 Ω in 100V mode / 1100 W at 70V, 100V, Rated Power, Symmetrical: 400 W per channel at 2 Ω / 300 W per channel at 4 Ω, 8 Ω, 70V, 100V, SNR: > 104 dB (A-weighted), THD+N: < 0.1% (< 0.05% typical, from 0.1 W to half-power), Audio Input- 4 channels
232	Supply, Testing, and Commissioning of Amplifier for Delay Speaker & Front Fill, Channel Separation (Crosstalk): > 80 dB at 1 kHz, > 65 dB at 20 kHz, Dynamic Range: ≥ 100 dB at rated power, A-weighted, Frequency Response: 20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100V, Gain, High-Impedance: 35 dB, 70V mode / 38 dB, 100V mode, Gain, Low-Impedance: 32 dB, Maximum Peak Power, Symmetrical: 600 W, number of channels:4, class D type, Rated Power, Symmetrical: 300 W, THD+N: < 0.04% at 1 kHz, 4–8 Ω, 70V/100V, 4 nos. of Audio Input
233	Supply, Testing, and Commissioning of Amplifier for Green Room Speaker, Channel Separation (Crosstalk): ≤ -60 dBV below rated power, 1 kHz, Dynamic Range:88 dB, Frequency Response: 40 Hz – 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference, nos. of channels: 2, class D type, Rated Power, Symmetrical: 50 W per channel at 4 Ω / 25 W per channel at 8 Ω, THD+N: ≤ 0.3% at full rated power, analog inputs: 2 unbalanced, line + 1 balanced, mic/line + 1 balanced, mic (page) + 1 unbalanced, line (auxiliary).
234	Supply, Testing, and Commissioning of Active Speaker to be used as stage Monitor, 2 combo XLR – ¼\" inputs, 3.5 mm input, Bluetooth input, ¼\" TRS line output, Wireless range up to 30 ft (9 m)
235	Supply, Testing, and Commissioning of Digital Signal Processor with min. 8 AEC enabled Mic/Line inputs, 8 Line outputs,
236	Supply, Testing, and Commissioning of 20-channel Analog Mixing Console, High-Performance 22-input small format analogue mixers with onboard effects, EQ, Effects, preamps, limiters, 2-in/2-out USB audio playback and recording, Switchable Hi-Z inputs for guitars, basses and other instruments, Hi-Pass Filters (low-cut) and 48V Phantom Power on all mic channels.
237	Supply, Testing, and Commissioning of Dual Channel Wireless Handheld Microphone system, Transparent 24-bit digital audio Extended 20 Hz to 20 kHz frequency range (microphone dependent), 118 dB dynamic range, Digital predictive switching diversity, 44 MHz tuning bandwidth (region dependent), 32 available channels per frequency band (region dependent), Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band, Easy pairing of transmitters and receivers over scan and IR syncAudio Output: Gain Adjustment Range –18 to +42 dB in 1 dB steps Configuration 1/4\" (6.35 mm): Balanced (Tip=audio +, Ring=audio –,Sleeve=ground) XLR: Balanced(1=ground, 2=audio +, 3=audio –) Impedance 1/4\" (6.35 mm): 1.3 kΩ (670 Ω Unbalanced) XLR (line): 400 Ω (200 Ω Unbalanced) XLR (mic): 150 Ω Full Scale Output 1/4\" (6.35 mm): +15 dB differentially (+9 dBV single) XLR (LINE setting): +15 dBV XLR (MIC setting): –15 dBV Mic/Line Switch 30 dB pad Phantom Power Protection 1/4\" (6.35 mm): Yes XLR: Yes
238	Supply, Testing, and Commissioning of Dual Channel Wireless Lapel system, Transparent 24-bit digital audio Extended 20 Hz to 20 kHz frequency range (microphone dependent), 118 dB dynamic range, Digital predictive switching diversity, 44 MHz tuning bandwidth (region dependent), 32 available channels per frequency band (region dependent), Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band, Easy pairing of transmitters and receivers over scan and IR sync, Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
239	Supply, Testing, and Commissioning of Wireless Microphone antenna distribution system with complete set
240	Supply, Testing, and Commissioning of Dynamic Vocal Microphone, Cardioid (unidirectional) dynamicFrequency response: 50 to 15,000 Hz, Pneumatic shock-mount system cuts down handling noise, Supplied with break-resistant stand adapter which rotates 180 degrees.
241	Supply, Testing, and Commissioning of Customised long arm heavy duty microphone stand with provision of adjust the length
242	Supply, Testing, and Commissioning of Customised Short arm heavy duty microphone stand with provision of adjust the length
243	Supply, Testing, and Commissioning of Customised Floor Plate having 2 XLR input/2 XLR Output, HDMI
244	Supply, Testing, and Commissioning of 4 sqmm 2 core speaker cable
245	Supply, Testing, and Commissioning of 2.5 sq mm2 core Speaker cable
246	Supply, Testing, and Commissioning of 1.5 sq mm 2 core speaker cable
247	Supply, Testing, and Commissioning of Microphone Cable with 2 core sheilded PVC insulated microphone cable
248	Audio Video System (Digital Signage)Supply, Testing, and Commissioning of 55\"Professional Display, Size- 138.7 cm, Resolution (HxV): 3840(H)x2160(V), aspect ratio- 16:9, Panel Type -DLED, Brightness (typ): 400 cd/m², response time: 6ms, Viewing angle: 178°（H）/178°（V）,HDMI out, Display Orientation: Landscape/Potrait
249	Supply, Testing, and Commissioning of Software License for Each Display
250	Supply, Testing, and Commissioning of PC for managing the signage software
251	Video Projection, Switching and Control SystemSupply, Testing, and Commissioning of Projector- LCD Projector, 16:10 aspect ratio, pixels- 2304000 (1920x1200) pixels, light source-laser diode, 16500 lumens, resolution- WUXGA (1920x1200), Contrast Ratio: 3000000:1, lens- long throw lens, HDMI INx2,Serial/Multi Sync IN.
252	Supply, Testing, and Commissioning of Mounting kit for Projector as per site requirement
253	Supply, Testing, and Commissioning of 4-channel HD switcher, recorder and live streaming media processor , 4-input video processor (with HDMI and IP) , Source scaling switching and vision mixing, Supports RTMP, RTMPS, MPEG-TS, TCP and UDP streaming protocols , On-board disk storage with network storage support
254	Supply, Testing, and Commissioning of Full HD PTZ Camera, Flexible 1080p 60fps PTZ camera with 20x zoom, 3G-SDI, HDMI and IP streaming, Professional Sony image sensor, Supports 1080p at 60fps, Versatile 20x optical zoom, Delivers HD video output via Ethernet, HDMI, and 3G-SDI simultaneously
255	Supply, Testing, and Commissioning of Interactive podium- Digital podium which comes with a 21.5\" Sub Monitorprovision to place AV connectivity wall plate with Gooseneck Mic
256	Supply, Testing, and Commissioning of Matrix Switcher: 8x8 HDMI 2.0 Matrix Switcher, 4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, IR, RS232, & TCP/IP control, Analog and digital de-embedded audio outputs, Audio outputs can follow video or be routed independently, Built in web server control, Supports IR, RS232 and IP control, Manual DIP switch for EDID management, Web control features advanced independent EDID control for each HDMI input, Open telnet API for 3rd party control, Integrated re-clocking circuitry for maximum device compatibility (cable box, streaming players, and other devices).
257	Supply, Testing, and Commissioning of HDMI 2.0 HDBaseT Extension Set, 4K60 4:4:4 / HDR 18G 70m HDMI extender set with IR & 2 way flexible PoC, Extends bi-directional IR. Flexible PoC (Power on either end), Supports HDR10, HDCP 2.2 compliant Flexible power design (use power supply at TX or RX), Includes re-clocking circuitry for maximum device compatibility, Locking power connector (power supply included)
258	Supply, Testing, and Commissioning of 43\" Display for Green Room and Control Room, size- 109cm, panel technology- IPS, aspect ratio: 16:9, Resolution: (3840*2160)UHD, Brightness: 400 nits, viewing angle: 178x178, response time: 8ms, contrast ratio: 1200:1, 24/7 operations, 3 nos. HDMI input, HDCP 2.2-yes, RJ-45-1nos., 10+10 watt inbuilt speaker.
259	Supply, Testing, and Commissioning of 55\"Professional Display, Size- 139.7 cm, Resolution (HxV): 3840(H)x2160(V), aspect ratio- 16:9, Back Light Unit -DLED, Brightness (typ): 500 cd/m², Display contrast- 4000:1, Viewing angle: 178°（H）/178°（V）,Operation Time: 7 daysx24 hours ,Built -in WIFI: 2.4GHz/5GHz,HDMI IN: 3 (HDMI 2.0), Line Output: 1 x 3.5mm, RJ45: 1 x RJ45 (100/10Mbps), RS232: Yes, Speaker: 10W*2.
260	Supply, Testing, and Commissioning of 65-inch Smart TV for Chairman\"s & CEO rooms
261	Supply, Testing, and Commissioning of 1.8m HDMI cable.
262	Supply, Testing, and Commissioning of 10m HDMI cable
263	Supply, Testing, and Commissioning of UTP Cat6 cable for Extender connectivity.
264	Supply, Testing, and Commissioning of 36U equipment Rack with 3 X plate and 2 X PDU.
265	Supply, Testing, and Commissioning of Control Processor- Relay Six relays configurable to NO, NC or COM12V Out Four 12V outputs programmable to turn on/off, momentary toggle, Sensor Six programmable sensor ports, compatible with all URC sensors, Network RJ45 10/100/1000 (gigabit) Ethernet port, IR Twelve 3.5mm IR emitter ports with variable output level, RS-232 Six RS-232 Serial ports (TX, RX, GND), Indicator LEDs Power and Ethernet
266	Supply, Testing, and Commissioning of Touch panel- Attractive, upscale design, Soft-touch finish, diamond polished metal accents 10” high-resolution touchscreen, Colorful, vivid images, menus, icons and backgrounds AV intercom works with all Total Control 2.0 touchscreens Live camera view from door stations and surveillance cameras, Night mode and proximity sensor
267	Supply, Testing, and Commissioning of 24-Port 10/100/1000T + 2-Port 1000X SFP Web Smart Ethernet Switch
268	Stage Lighting andFurnishing SystemSupply, Testing, and Commissioning of CE Certified LED PARCAN Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Single COB LED Source• Power Factor : >0.95 @ 230V AC 50Hz• Color Temperature : 3200K with CRI & TLCI Value > 90• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1/2 DMX-512 Channel Modes• Beam angle: 9°/15°/20°/25°/30° Manually Selectable • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• LUX @ 2m: > 40,000 @ 9° Beam Angle• Flickering Rate : more than 10000 FPS • Dimming: 0 - 100% Electronic Dimming• Function: Strobe, Dimming• Housing : Spun Aluminium Housing with black epoxy polyster powder coated finish.• Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected.• Power and DMX: Loop in and loop out compulsary• DMX in & Out Through : 5 Pin XLR connectors• Certification: CE / BIS
269	Supply, Testing, and Commissioning of CE Certified LED Blinder Effect Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Quad LED COB Source• Power Factor : >0.95 @ 230V AC 50Hz• Color Temerature : 3200K, CRI & TLCI Value > 95• R9 Value > 94• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 4/8 DMX-512 Channel Modes• Beam Angle : 40°• Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• Lux output at 2 Mtr : > 10,000 Lux@ 40°• Flickering Rate : more than 10000 FPS • Dimming: 0 - 100% Electronic Dimming• Power and DMX: Loop in and loop out compulsary• DMX in & Out Through : 5 Pin XLR connectors• Certification: CE / BIS
270	Supply, Testing, and Commissioning of CE Certified LED PAR Light with latest RDM technology for user friendly operation with below specifications: • Base Color RGBW Color Mixing• LED Configuration : Multiple Nos Individual RGBW LED Configuartion• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 8 DMX-512 • Beam angle: 15° • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run, Sound Active• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• LUX @ 2m: >10,500 @ 15° Beam Angle• Dimming: 0 - 100% Electronic Dimming• Function: strobe, dimming, sound active and Master slave.• Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish.• Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected.• Power and DMX: Loop in and loop out compulsary• DMX in & Out Through : 5 Pin XLR connectors• Certification: CE / BIS
271	Supply, Testing, and Commissioning of CE Certified LED Profile Spot Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Single LED COB Source• Power Factor : >0.95 @ 230V AC 50Hz• Color Temerature : 3200K, CRI & TLCI Value > 95• R9 Value > 94• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1/2/3 DMX-512 Channel Modes• Beam Angle : 19° or 15°• Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• Lux output at 2 Mtr : > 20,000 Lux@ 19° or 15°• Flickering Rate : more than 10000 FPS • Dimming: 0 - 100% Electronic Dimming • 4 Beam shaping shutters• Accessory slot for Gobo and gobo holder, Iris & Color Frame should be available or else fixture will be rejected.• Housing: Metal Housing with black epoxy polyster powder coated finish or PVC Body with matt black finish• Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 5 Pin XLR connectors • Certification: CE / BIS
272	Supply, Testing, and Commissioning of CE Certified LED PAR Light with latest RDM technology for user friendly operation with below specifications: • Base Color 3200K Color Mixing• LED Configuration : Multiple Nos Individual 3200K LED Configuartion• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1 DMX-512 • Beam angle: 15° • Control mode: RDM, DMX512 & Manual• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• LUX @ 2m: >7,500 @ 15° Beam Angle• Dimming: 0 - 100% Electronic Dimming• Function: strobe, dimming, sound active and Master slave.• Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish. • Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected.• Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 5 Pin XLR connectors • Certification: CE / BIS
273	Supply, Testing, and Commissioning of CE Certified LED RGBW Cyclorama Wash Light with RDM protocol and Laser cut aluminium body duly epoxy polyester powder coated in black matt texture finish with following specifications -• LED : 480x0.5W RGBW LED (120R + 120G + 120B+ 120W) Nichia or Lumiled Make LED • Beam Angle : 96°• Detachable Assymmetric reflector with 64°, 62° for uniform wash. • Light Out put : 3000 Lux at 1 Mtrs without assymmetric reflector. • User Interface : 4 Nos High Precision Tactile type selector switch with Seven Segment Display • Fully RDM Compliant when in DMX mode • Dimming : 0 to 100% 8 Bit Linear Dimming • DMX data IN / OUT: 5 pin locking XLR • Natural Cooling System. No fan, No noise.• 2.5 m Power In + 0.5 m Power out or 3 Mtr 3 core 1 mm² FRLS & ISI mark cable with 3pin IEC Male Plug • 3 mtr DMX loop cable with cable mount 5 pin locking XLR • CE Certificate should be enclosed to ensure the required quality and safety of the products.
274	Supply, Testing, and Commissioning of CE Certified 150W LED HYBRID MOVING (Beam, Spot & Wash Effect) Light with RDM protocol and Hi grade plastic body black color with following specifications - • LED : 150WCool White LED.• Beam Angle : 3°~4°, Zoom Angle : 8°~15°• Power Consumption : 150W ± 10%• Light Out put : >20,000 Lux at 2 Mtrs• Color Wheel : Minimum 8 Colors and open or More• Fixed Gobo Wheel : Minimum 9 Fixed Gobos or More • Rotating Gobo wheel : Minimum 7 Rotating Gobos or More • User Interface : 4 Nos High Precision Membrane type selector switch with LCD Display • Fully RDM Compliant when in DMX mode• Dimming : 0 to 100% 16 Bit Linear Dimming• DMX data IN / OUT: 5 pin locking XLR • Cooling system with low noise fan for forced ventilation • 3 Mtr 3 core 1 mm² FRLS & ISI mark cable with 3pin IEC Male Plug with proper earthing• 3 mtr DMX loop cable with cable mount 5 pin locking XLR • CE Certificate should be enclosed to ensure the required quality and safety of the products.
275	Supply, Testing, and Commissioning of Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications.• Lock - MS threaded Galvanized lock key, • Plastic Glass filled nylon moulded M6 key. • Receptacle - 28mm standard TV spigot. • Safety - MS Galvanized chain with pin. • Finish - Pretreated and black epoxy polyester powder coated. • Self-weight - 0.54Kg
276	Supply, Testing, and Commissioning of Safety bond with lock clip 1.5 Mtr Long made with twisted pair of GI wire rope, 2mm or 3mm Thickness with sleeve to be fixed around the grid to avoid fall of the material in case if the \"C\" clamp is not locked properly. SWL 150Kgs.
277	Supply, Testing, and Commissioning of 79mm Round Identification name plate duly epoxy polyester powder coated in matt texture finish.
278	Supply, Testing, and Commissioning of Stage Light Bar, length 9 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications:• Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Frill Bar attachement.• Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch.
279	Supply, Testing, and Commissioning of Front of house Light Bar, length 12 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications:• Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch.
280	Supply, Testing, and Commissioning of MS Side Lighting Ladder of suitable length and Width (Min 2400 mm Height & 600 mm Width)• Made using 40NB, 48MM OD, 2mm thickness MS Pipe • Suitable suspender and clamps made with MS Angle of size 40x40x5 mm thick or higher size• Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp, • Heavy duty Ladder Track to be laid throughout the depth of the stage.• 360° Rotatable and can move in unidirectional• All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.
281	Supply, Testing, and Commissioning of Main Valance Bar, length 15.5 Mtrs made using 40NB, 48mm OD construction arrangement 2mm Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders.
282	Supply, Testing, and Commissioning of Main Curtain track system 15.5 Mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish. • 1.0 HP Motor, 3 Phase Motor. • GI wire ropes with steel core at center. • Curtain holding trolliesplaced uniformly at specific interval of 200mm /250 mm throughout the track. • Diverter pulley • MS yellow passivized Routing pulleys with ball bearing for smoother noiseless movement 165mm for outer diameter, 145mm diameter at groove base with 12mm pulley thickness. • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.
283	Supply, Testing, and Commissioning of Rear Curtain track system 14 Mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish. • 1.0 HP Motor, 3 Phase Motor. • GI wire ropes with steel core at center. • Curtain holding trolliesplaced uniformly at specific interval of 200mm /250 mm throughout the track. • Diverter pulley • MS yellow passivized Routing pulleys with ball bearing for smoother noiseless movement 165mm for outer diameter, 145mm diameter at groove base with 12mm pulley thickness. • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.
284	Supply, Testing, and Commissioning of MS, Wing frame made out of 25X25mm or higher size made of MS square pipe with 2mm in thickness undergone through various chemical treatment to keep them rust free and duly powder coated in black matt texture finish with Below Specifications:• Wing Frame Size 5 x 1.5Mtr • 1.5meter wing track of 48x84mm with grid mount brackets made of40X50X40mm C track,• Pivotable 4 wheeled suspension trolley,• Adjustable floor locking screw jacks with rubber grips, • Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp, • Heavy duty wing track to be laid for minimum length of 1.5mtr, along the width of the stage. • 360° Rotatable and can move in unidirectional • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.
285	Supply, Testing, and Commissioning of Cyclorama frame arrangement of size 11 Mtr x 4.5 Mtr undergone through various chemical treatment to keep them rust free and duly powder coated in black matt texture finish with Below Specifications:• Heavy duty Cyclorama track duly epoxy polyester powder coated inblack matt texture finish to use as straight cyclorama track• MS fabricated Grid/wall mount bracket constructed of C track of dimension 40X50X40mm duly powder coated to hold the Cyclorama track,• MS fabricated Tie down railing cut length 3 mtr duly powder coated to keep the cyclorama in drumtight arrangement,• 2 wheeler trolley placed uniformly at specific interval of 200mm/250mm throughout the track to hold the cyclorama screen• MS powder coated Leading edge pipe of 25NB, 33.4MM OD, 2mm thickness to keep the cycloramain drum tight arrangement.• All the MS materials under gone through 7 tank process with various chemical treatment to keepthem rust free with and duly epoxy polyester powder coated in black matt texture finish.
286	Supply, Testing, and Commissioning of MS Fabricated 4 way 10A, 250V A.C, IEC, Lighting Junction box made up of 22SWG CRCA for LED lighting fixtures with Pipe clamp arrangement for fixing on pipe grid or Raul plug arrangement for wall/floor fixing, duly black epoxy polyester powder coated texture finish.
287	Supply, Testing, and Commissioning of MS Fabricated 2 way 10A, 250V A.C, IEC,Junction box made up of 22SWG CRCA with rocker switch to power up splitter and console with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, duly black epoxy polyester powder coated texture finish.
288	Supply, Testing, and Commissioning of MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX Male socket, junction boxmade up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish.
289	Supply, Testing, and Commissioning of MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX female socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish.
290	Supply, Testing, and Commissioning of Fabricated 5 pin DMX Signal loop Junction box fitted with 5 pin DMX Male & Female socket with 0.3 Mtr DMX Loop cable fitted with 5 pin DMX cable mount plug, junction boxmade up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish
291	Supply, Testing, and Commissioning of Well designed 21 Way Direct Lighting Distribution Board made up of CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt texture finish consists of R, Y, B Indicator lamp, 50A TPN incomer, SP Mcb\"s and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and Hingable door with magnetic door lock complete.
292	Supply, Testing, and Commissioning of Auxiliary marshalling box for power and signal cable termination in grid level and in Motorised Light bar• CE Marked FC/PG cable entry gland required Nos as per cable entry.• MS channel arranging to fix terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. • Grey terminal connector with each line having P, N, E Indication for each line incoming and out going cable connectors.• Box door must be made with Hingeable door with screw lock. • Made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish.
293	Supply, Testing, and Commissioning of Motor Cable Termination box for power cable termination at grid level.• CE certified FC/PG 11 & 13.5 cable entry gland required Nos as per cable entry.• MS channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. • Grey terminal connector with each line having L1, L2, L3, E, 6 , 2 , 4 Indication for each line incoming and outgoing cable connectors (L1, L2, L3, E for Power supply & 6 , 2 , 4 for Limit Switch connection)• Box door must be made with Hingeable door with screw lock. • Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing• MS Boxe made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish.
294	Supply, Testing, and Commissioning of MS Fabricated Combined 2 Way Motor Control Center panel cum Remote Controlpanel for Curtain system made up of 14SWG / 16SWG / 18 SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt seaman’s grey texture finish with following specifications.• 16A TP or TPN Incomer.• Main Contactor of 9A 240V 4 pole contactor with 04 -06A Over Load relay for safety• 24V 4 pole Low Voltage Contactors• 240V / 24 V Step-down transformer for Low voltage Contactors • All the FRLS PVC ISI Marking cables inside the panel routed through PVC gray color cable trough. • Red Color Mushroom head push button for emergency stop • Yellow color reset push button • Master sector actuator switch with 3 Position UP, DOWN & OFF • Spring return selector switchfor each hoist with UP & DOWN indication. • All the cables inside the panel routed through PVC gray color cable trough. • Panel Including wiring with proper earthing.
295	Supply, Testing, and Commissioning of RDM Compatible DMX Splitter unit with Minimum following specifications.● 1 Nos 5 Pin DMX In socket and 8 Nos 5 Pin DMX Out socket● In and out signal Optically Isolated● LED Indicator for check the signal flow in output.●Suitable for standard 19” cabinet● Duly black epoxy polyester powder coated texture finish.
296	Supply, Testing, and Commissioning of Digital Lighting console with Minimum following specifications.● 512 Channel, 2 Output● No. Of Direct Fixture Control : Atleast 200 or more● No. Of Faders : Atleast 12 ● Atleast 4 Encoder Wheels● 7\" Touch screen display for navigation● Backlight Keyboard● Numeric Key Board
297	Supply, Testing, and Commissioning of 5 pin XLR male / female connectors of made up of Extra high temperature resistant insulator material, Larger solder contacts for easier termination.
298	Supply, Testing, and Commissioning of 5 Pin XLR Termination plug made up of extra high temperature resistant insulator material, Larger solder contacts for easier termination with 120 Ohm resister with 0.25Watt for signal termination.
299	Supply, Testing, and Commissioning of Main Valance Fabric : Fire retardant velvette fabric100% (2 times of the finished dimension) gathering as per the approved patern and colour, not less than 300 GSM, duly stitched along witheyelets. Size : 16 x 1.3 Meter
300	Supply, Testing, and Commissioning of Main Curtain Fabric : Fire retardant velvette fabric with lining 100% (2 times of the finished dimension) gathering as per the approved patern and colour, not less than 300 GSM, duly stitched along witheyelets. Size : 16.5 x 5 Meter
301	Supply, Testing, and Commissioning of Rear Curtain Fabric : Fire retardant cotton fabric 50% gathering for as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. Size : 15 x 5 Meter
302	Supply, Testing, and Commissioning of Frill Fabric : Fire retardant cotton fabric 50% gathering for as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. Size : 9 x 1.3 Meter
303	Supply, Testing, and Commissioning of Wing Fabric : Fire retardant cotton fabric 0% gathering for as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. Size : 5 x 3.1 Meter
304	Supply, Testing, and Commissioning of Cyclorama : Perforated plastic Cyclorama screen with zero gain, off white, with eyelets along all four sides, perforated plastic screen with eyelets.Size : 11 x 4.5 Meter
305	Supply, Testing, and Commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm.
306	Supply, Testing, and Commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 4cx 4 sq mm.
307	Supply, Testing, and Commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 7cx1.5 sq mm.
308	Supply, Testing, and Commissioning of FR Grade DMX Signal 4 core + Ground shieldingCable with CE mark for the Signal network.
309	Supply, Testing, and Commissioning of MS perforated tray of Size 40 x 75 x 40mm & 1.6 mm Thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement.
310	Supply, Testing, and Commissioning of Internal earthing copper bare conductor of size 14 SWG for power network related to work coming under our scope.
311	Supply, Testing, and Commissioning of Installation hardware’s such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work.
312	RO CHANSON REVOLUTION PL-A 902
313	RO Plant -2000 Lts Capacity
314	Supplying,Fixing of Gyser 15ltr capacity.
315	SECTION - I- STRUCTURED CABLING SYSTEM PASSIVESupply, Testing, and Comissioning of (12 Port) 24 Fiber Splices should be accomodated in 1U Rack Mount LIU, should be 1U (1.75”), 19 Inch Rack Mount, 24 Fiber Splices should be accomodated in 1U Rack Mount LIU, compatible with LC Type Connectors, 24 Molded Fiber Splice trays should loaded in panel with Pigtails, Splice Tubes, ABS injection, PG13.5 water joint Gland, Blankers(in case of 12/24 fiber panel), Cable Ties and Velcro Straps, Couplers/adapter should be Blue Colored for Singlemode, Couplers/adapter should be Erika Violet Colored for Multimode OM4, and as per EU Directive 2011/65/EU (ROHS II).Approved Makes:Panduit/Belden/Commscope/Leviton
316	Supply, Testing, and Comissioning of (24 Port) 48 Fiber Splices should be accomodated in 1U Rack Mount LIU, should be 1U (1.75”), 19 Inch Rack Mount, 48 Fiber Splices should be accomodated in 1U Rack Mount LIU, compatible with LC Type Connectors, 48 Molded Fiber Splice trays should loaded in panel with Pigtails, Splice Tubes, ABS injection, PG13.5 water joint Gland, Cable Ties and Velcro Straps, Couplers/adapter should be Blue Colored for Singlemode, Couplers/adapter should be Erika Violet Colored for Multimode OM4, and as per EU Directive 2011/65/EU (ROHS II).Approved Makes:Panduit/Belden/Commscope/Leviton
317	Supply, Testing, and Comissioning of LC-LC Singlemode OS2, Yellow Colorfiber patch cord 2mm Duplex Zipcord, outside dia (duplex) 2 mm, LSZH (IEC 60332-1/3, IEC 60754-2, IEC 61034-2), Should be available in Plenum and Riser if required, insertion loss ≤ 0.3 dB , return loss ≥ 55dB , compatible to the cable standards IEC 60794-2-50, IEC 60332 IEC 60754, IEC 61034, ANSI/UL 1666 NFPA 262, and Should be tested from ETL/Intertek in fiber channel . Approved Makes:Panduit/Belden/Commscope/Leviton
318	Supply, Testing, and Comissioning of CAT6 information outlet (I/O) for Data, Voice, Camera & Wi-Fiat Both Side. As per technical specification. Approved Makes:Panduit/Belden/Commscope/Leviton
319	Supply, Testing, and Comissioning of Unloaded CAT6 jack panel with following specificationCategory: CAT-6 Size: 19” rackmount 1 Rack Unit Number of ports: 24Accepts all RJ45 keystone jacksAccepts 23-26 AWG solid or stranded cable copper conductor50-um gold plated on the plug contact area RJ45 Jack’s Performance should be ETL Verified, cULus listed and tested with the latest standards from Intertek/ETL/3P – Not applicable to panel only applicable to RJ45 jacks. Approved Makes:Panduit/Belden/Commscope/Leviton
320	Supply, Testing, and Comissioning of CAT6 UTP patch cord 1 Meter with the following specifications.Type: - CAT6 U/UTP Pair:- 4 pairs 24 AWG Stranded wire Pre-terminated with RJ45 plugs Slim clear anti-snag slip-on boots Suitable for EIA 568A or 568B wiring applications PVC/LSZH sheath . Approved Makes:Panduit/Belden/Commscope/Leviton
321	Supply, Testing, and Comissioning of CAT6 UTP patch cord 2 Meter with the following specifications.Type: - CAT6 U/UTP Pair:- 4 pairs 24 AWG Stranded wire Pre-terminated with RJ45 plugs Slim clear anti-snag slip-on boots Suitable for EIA 568A or 568B wiring applications PVC/LSZH sheath . Approved Makes:Panduit/Belden/Commscope/Leviton
322	Supply, Testing, and Comissioning of 1, 2 and 4 port face plate white for I/O fixing at user side. As per technical specification. Approved Makes:Panduit/Belden/Commscope/Leviton
323	Supply, Testing, and Comissioning of 42 U (800W/1000D) floor mount rack with four fans and side panels, IP20, 1 NosFront Glass Door - 42U - 800W - Cam Lock - Ventilation - Black Fine Tex. - Assembly, 1 Nos Rear Door - 42U - 800W - Cam Lock - Square Slot Ventilation - Black Fine Tex. - Assembly, 3 Nos Mounting 1 Nos. Hardware Packet { Containg 1 Nos Each Of 3 } - 20 Set, 1 Nos. 3 Inch Castor Set, 10 Nos. Metal Cable Manager - 01U - Plastic Cable Loop\"s Mountable - Black Fine Tex. - Assembly, 1 Nos. Power Distribution Unit - 06/16 Amp Indian-Standard - 12 Socket - Single Pole / Screw Mountable / 32 Amp MCB / Alternating Current - Industrial Plug 32A with Power Cable 6 sq.mm 3 meter Length, 1 Nos. Monitor Tray - Ventilation - 495W - 700D - Black Fine Tex.- Assembly, and 1 Nos. EARTH STRIP BARE BF 483 A.Approved Makes: Valrack/Netrack/Rittal/APC/APW
324	Supply, Testing, and Comissioning of 24U (600W/800D)floor mount rack with 1 Nos. Front Glass Door - 24U - 600W - Cam Lock - Ventilation - Duscky Fine Tex. - Assembly, 1 Nos. Rear Door - 24U - 600W - Cam Lock - Square Slot Ventilation - Duscky Fine Tex. - Assembly, 1 Nos. 3 Inch Castor Set, Four Fans, 4 Nos. Metal Cable Manager - 01U - Plastic Cable Loop\"s Mountable - Black Fine Tex. - Assembly, 3 Nos. Mounting Hardware Packet { Containg 1 Nos Each Of 3 } - 20 Set, 1 Nos. Power Distribution Unit - 06/16 Amp Indian-Standard - 10 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 2 Nos. Metal Cable Channel - 100 mm Width - 800 mm Height - Pastal Fine Tex. - Assembly, 1 Nos. Earthing Strip - 150mm - Nickel Plating - Assembly, and IP20.. Approved Makes: Valrack/Netrack/Rittal/APC/APW
325	Supply, Testing, and Comissioning of 17U 600 x 800 floor mount network rack with front Glass dooe of 5mm, side panels without perforation, rear perforated panel with sqaure slot vetilation, 2 Fans Kits, 2 Nos Brush Cable entry, Castors (Set of 4 pivoting castors, 2 of which have breaks, 4 Nos. Metal Cable Manager - 01U - Plastic Cable Loop\"s Mountable - Black Fine Tex. - Assembly, 2 Nos Power Distribution Unit - 06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 2 Nos Mounting Hardware Packet { Containg 1 Nos Each Of 3 } - 20 Set, 5 Nos Metal Steel Blank Panel - 01U - Black Fine Tex. - Assembly, and IP20. Approved Makes: Valrack/Netrack/Rittal/APC/APW
326	Supply, Testing, and Comissioning of Wall Mount - 09U - 600W - 600D - Double Fan Provision - Pastal Fine Tex, Double Fan For WallMount, 3 Nos Metal Cable Manager - 01U - Plastic Cable Loop\"s Mountable, 1 Nos Mounting Hardware Packet { Containg 1 Nos Each Of 3 } - 20 Set, 1 Nos Power Distribution Unit - 06/13 Amp Multi-Standard - 06 Socket - Single Pole / Screw Mountable / 06 Amp MCB / Alternating Current - 06 Amp 3 Pin Plug with Power Cable 0.75 sq.mm 3 meter Length, and Metal Steel Blank Panel - 01U - Pastal Fine Tex. Approved Makes: Valrack/Netrack/Rittal/APC/APW
327	SECTION - III- LOCAL AREA NETWORK( LAN )Supply, Testing, and Comissioning of Core Switch 1RU chassis with 48 25G SFP28 ports and 8 100G QSFP28 ports. SFP28 ports operate as 1/10/25GE. QSFP28 ports operate as 100GE/40GE/4x25GE/4x10GE. Front to back cooling. Includes dual AC PS units,cord,manuals access card and rack mounts. Approved make - Cisco / Alcatel/Juniper/Arista
328	Supply, Testing, and Comissioning ofDistribution switch with 1RU chassis with 24 SFP+ users, 2 SFP+ uplinks or VFL and 2 QSFP28 ports. QSFP28 ports operate as 40/100G-4x10/25G. Front to back cooling. Includes dual AC power supplies, country specific power cord, manuals access card and rack mounts. Approved make - Cisco / Alcatel/Juniper/Arista
329	Supply, Testing, and Comissioning of UTM Firewall with 8 x 10/100/1000and 16 x 1G SFP ports, should have 4GB RAM and 8GB internal storage,The device should have 4000Mbps of Firewall throughput (1518 B Packet size) and300 Mbps of NGFW throughput. 300 Mbps IPS througput, 800 Mbpsof IPSec VPN with 1900 VPN tunnels support. Should have internalredundant power supply, should be EAL 3/NDPP/ NDcPP certified under Common Criteria. As per technical specification. Approved make - Cisco / Juniper /Impulse/DLink / Nexxus/Arista
330	Supply, Testing, and Comissioning of 24 Port PoE Access Switches fixed 1RU chassis 24 PoE 1G BaseT, 2 fixed RJ45/SFP+ combo (1G/10G), 2 fixed 1G/10G SFP+ uplink/VFL ports. Internal AC PSU (380 budget), includes country specific power cord, guides and 19\" rack mount kit. Approved make - Cisco / Alcatel/Juniper/Arista
331	Supply, Testing, and Comissioning of 48 Port PoE Access switches with fixed 1RU chassis 48 PoE 1G BaseT, 2 fixed RJ45/SFP+ combo (1G/10G), 2 fixed 1G/10G SFP+ uplink/VFL ports. Internal AC PSU (760W budget), includes country specific power cord, guides and 19\" rack mount kit.. Approved make - Cisco / Alcatel/Juniper/Arista
332	Supply, Testing, and Comissioning of 24 Port NoN PoE Access Switches with GigE fixed chassis24 RJ-45 10/100/1G BaseT, 2 fixed SFP (1G), 4 fixed SFP+ (1G/10G) uplink/stacking ports. 1RU size, internal AC power supply. Includes United States power cord, guides, and 19\" rack mount hardware. . Approved make - Cisco / Alcatel/Juniper/Arista
333	Supply, Testing, and Comissioning of 48 Port NoN PoE Access switches with GigE fixed chassis48 RJ-45 10/100/1G BaseT, 2 fixed SFP (1G), 4 fixed SFP+ (1G/10G) uplink/stacking ports. 1RU size, internal AC power supply. Includes a country specific power cord, guides, and 19\" rack mount hardware.. Approved make - Cisco / Alcatel/Juniper/Arista
334	Supply, Testing, and Comissioning of fiber Modules 10 Gigabit optical transceiver SFP+). Supports multimode fiber over 850nm wavelength nominal) with an LC connector. Typical reach of 300m. Approved make -Cisco / Alcatel/Juniper/Arista
335	Supply, Testing, and Comissioning of fiber Modules Four channel 40 Gigabit optical transceiver (QSFP+). Supports single mode fiber. Typical reach 10 km. Duplex LC receptacles.. Approved make - Cisco / Alcatel/Juniper/Arista
336	SECTION - IV- Wi-Fi SYSTEMS & WEB SECURITY Supply, Testing, and Comissioning of OmniAccess Stellar Indoor AP1321. Dual radio 5GHz 4x4:4 / 2.4GHz 2x2:2 802.11ax, integrated omni antenna. 1x1 scanning radio and BLE radio. 1x 2.5GbE, 1x 1GbE, USB, 48V DC. AP mount order seperately including 1 Yr Partner Support Plus . Approved make - Cisco / Juniper /Impulse / Nexxus/Arista
337	Supply, Testing, and Comissioning ofWirelss controller to support Min 512 AP in future , ready to support min 60 AP from from Day1 .Min 2x USB ports , Min 16 K Wirelss client support , Min 4 GB RAM ,Min 32 GB Storage , Same make as switch.WLAN Controller should be Hardware appliance 1U Rack mountable .As per technical specification. Approved make - Cisco / Juniper /Impulse / Nexxus/Arista
338	SUB-HEAD -V- IP CCTV SYSTEMSupply, installation, testing and commissioning of 5 MP Domecamera ,ONVIF profile S , G& T ,UL , CE , FCC Certified ,1/2.7” Progressive Scan CMOS ,2.7 mm to 13.5 mm motorized varifocal lens , Quad stream with each stream support H.265 compression simultaneously ,min illumination : Color 0.05lux @ F1.2(AGC ON) ; B/W 0 lux @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,WDR , Compression : H.265/H.265+/H.264/H.264+ .SD card supportupto 256GB , Alarm trigger - 1 input / 1 output, frame rate : Main stream should support 25 fps@5MP ,Edge analytics : Customer Flow staistics, Cross COunt, Heat Map, Human & Vehicle Detection, Pedestrian Intrusion Detection & Line cross Detection. Queue length detection, Regional population statistics, SOD-Stationaary Object Detection. , In built IR LED , IR Distance upto 45 meters , IP 66,IK10,POE.Audio -1 input/1 outputApproved Makes : Allgovision/ Impulse / Avigilon / Cisco/ Axis
339	Supply, installation, testing and commissioning of 5 MP Bulletcamera ,ONVIF profile S ,G & T . UL , CE , FCC Certified ,1/2.7” Progressive Scan CMOS ,2.7 mm to 13.5 mm motorized varifocal lens , Quad stream with each stream supportH.265 compression simultaneously ,min illumination : Color 0.05lux @ F1.2(AGC ON) ; B/W 0 lux @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,WDR , Compression : H.265/H.265+/H.264/H.264+/MJPEG .SD card support up to 256Gb, Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP , Edge analytics : Customer Flow staisticsCross Count, Heat Map, Human & Vehicle Detection, Pedestrian Intrusion Detection & Line cross Detection. Queue length detection, Regional population statistics, SOD-Stationaary Object Detection. , IR Distance upto 45 meters , IP 66, POE. Audio -1 input/1 outputApproved Makes : Allgovision/ Impulse / Avigilon / Cisco/ Axis
340	Supply, Testing, and commissioning of MINIMUM 5 MP Fixed Bulletcamera with 1/2.7\" CMOS, 0.05 Lux, f=2.8mmH.264/H.265 (Baseline / Main / High): main stream 5Mp@25fps, 2Mp@25fps, sub stream 1Mp@25fps Night Vision Range - 30m (IR + White LED + Smart Detection), 24/7 Full Colour, OEM Defined MAC protocol, ONVIF, ONVIF, RTSP, AWB, AGC, BLC, DWDRSD-card support up to 256Gb (not included), built-in microphone,IP66 rating, Anti-cut bracket, ONVIF 2.6+ (Profile S, Profile G, Profile T), DC12V, 0.5А/PoE, Operating temperature, °C -40 - +60, 3-Axis mounting, and supporting smart functions like Perimeter Intrusion Detection, Line Crossing Detection, Face Detection . Approved Makes : Partizan/ Panasonic / Pelco / Avigilon
341	Supply, Testing, and Commissioning of ANPR MINIMUM 5 MP Bulletcamera with 1/2.8\" CMOS image sensor 5MP ANPR camera with Varifocal motorized lens with autofocus, Dynamic range WDR 120dB, 0.01 lux, Focal length 5-50 mm, Iris, ONVIF 2.6+ (Profile S, Profile G), H.264/H.265 (Baseline / Main / High) compression, F1.8, Built-in IR LED, 8, Array, distance ≤80, BLC, HLC, True WDR, AGC, Slow Shutter, Privacy Masks, Micro SD support ≤128Gb), PoE, Temperature -40 °C to +60 °C, IP66, anti-cut bracket, and Smart functions support. Approved Makes : Partizan/ Panasonic / Pelco / Avigilon
342	Supply, Testing, and Commissioning of ANPR license per camera
343	Supply, Testing, and Commissioning of Software for ANPR database and whitelisting features with VI Base license
344	Supply, Testing, and Commissioning of64 Channel NVR with Rec speed: 64 channels 8.0Mp@25fps, 2xEthernet 10/100/1000Mbit. Audio in: 1xRCA. Alarm in: 16, Output: Video out: 1xHDMI, 1xVGA. Audio out: 1xRCA. Alarm out: 4, 8xSATA up to 8Tb (not included), 2xUSB 2.0, 1xUSB 3.0, RS-485, ONVIF, H.264/H.265, FTP, Accessories: built-in power adapter AC220V, mouse, and Smart Functions: Perimeter Intrusion Detection, Line Crossing Detection, Stationary Object Detection, Pedestrian Detection, Face Detection, Cross Counting, Face Recognition. Approved Makes : Partizan/ Panasonic / Pelco / Avigilon
345	Supply, Testing, and Commissioning of 8TB Surviellance Hard Disk.As per technical specification. Approved Makes : WD/Segate/ Toshiba
346	Supply, Testing, and Commissioning of Full HD 55\" LED Professional Display Panel.As per technical specification.Approved Makes : Panasonic / LG/ Sony/ Samsung
347	Supply, Testing, and Commissioning of 24 Port PoE Access Switches fixed 1RU chassis 24 PoE 1G BaseT, 2 fixed RJ45/SFP+ combo (1G/10G), 2 fixed 1G/10G SFP+ uplink/VFL ports. Internal AC PSU (380 budget), includes country specific power cord, guides and 19\" rack mount kit. Approved make - Cisco / Alcatel/Juniper/Arista
348	Supply, Testing, and Commissioning ofWindows 10 pro 64 bit, i-7 Intel processor 8 core, 3 GHZ, 512 GB SSD for OS,1 TB HDD for storage, 16 GB RAM,8 GB Graphic card ( NVIDEA).Approved Makes: HP / CoreIP / IBM
349	Supply, Testing, and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5\" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest.As per technical specification. Approved Makes: HP / CoreIP / IBM
350	Providing & Fixing 12meter GI Pole.

Also Visit

Tenders

Uttar Pradesh Tenders

Services Tenders

Space Planning and Designing Tenders

Interior Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Interior Work Furniture Audio Visual Structured Cabling System Networking (Lan), Wi-Fi System - Web Security And Ip Cctv System Etc For Operation Of The Building Of State Disaster Management Authority In Lucknow District, Lucknow-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Interior Work Furniture Audio Visual Structured Cabling System Networking (Lan), Wi-Fi System - Web Security And Ip Cctv System Etc For Operation Of The Building Of State Disaster Management Authority In Lucknow District, Lucknow-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us