Tender For Signages Work Of Village Holipura At Block Bah In Distt. Agra (U.P) - Cantilever Structuresteel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applyin, agra-Uttar Pradesh

Tender For Signages Work Of Village Holipura At Block Bah In Distt. Agra (U.P) - CANTILEVER STRUCTURESteel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted withspecial shaped washers etc. complete. (DSR 10.16.2) X 0.735 X 109/107 2 FMM (Flexible Median Marker) 3 Paintingwith Glow Radium Paint through stencil to give an even shade. Two or more coat over an under coat of primer appliedof approved brand and manufacture. 4 AFP (Alluminium Backed Flexible Prismatic Sheet) 5 Transportation charges 6 Erection Charges(including charges of crane) 7 FOUNDATIONEarth work in Excavation in trenches for foundation pipe cable etc in ordinary soll (Loam, clay or sand) including lift up to 1.50M and lead upto 50M and dresing of sides and ramming of bottom and disposal of surplus excuvated earth and directed by the Engineer I.c. within a lead of 30m. 8 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived fromnatural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). 9 R.C.C. works with cement approved coarse sand and 20 mm gauge approved stone grit in the proprotion 1:2:4 cement c/sand & stone grit in Foundation excluding supply int fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labours, tools and plant etc required for proper comletion of the works. Binding wire cost being included in the item. 10 Mild steel or iron work of plain work such as reinforced concrete or reinforced brick work (when not wrought to including in over all rates) wrought to requird shape as necessary including beding for proper completion of the work and including supply of steel its wastage bend hooks and authoriesd overiapping shall be measured upto floor two level. 11 Place Identification MS Structure Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 12 Hybrid cast aluminum Pole dulyprimer coated & Polyester/Polyurethane painted, including cutting, hoisting, fixing in position including welding and bolted with special shaped washers etc. complete. 3000MM height. (MR- Twinkle Lite-CYPRUS-H or as approval of architect in charge) 13 Cost for CNC work in M.S. Sheet with Logo engraved. 14 Foundation and Installation of Sign Boards complete with foundationwith 18mm 600 Mm Long 4 nos foundation BoltFoundation Size 450x450x900mm (0.182 cu.mtr) as per drawing per post. 15 Providing & fixing of reflective signs made out of made out of retro reflective sheeting of micro prismatic grade conforming to IRC-67: 2022 & TypeXI standards of ASTM D4956-09 specifications with2mm aluminium sheet/ 4 mm thick aluminium composite panelwith back frame MS angle of 35x35x5 mm, Special Inks used for printing letters/ legends/ directions/ theme shall be certified for low volatile organic compound emission & shall be water based ink (non solvent & non eco solvent ink) with durability of 10 years atleast. The reflective sheeting signage facia shall be covered with ultra voilet overlaminate transparant film 10 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an government test lab report of 3 year conducted in India condition for the product offered shall be submitted by the contractor. Technical specification along with test report, PQ must be submitted along with the tender of all the quoted item and same should be issued via OEM in the name of the bidder.proper completion of work as per direction of Engineer in Charge 16 G.S.T Extra as per applicable

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	21-03-2025	Date Extended	Date	25-03-2025

INR 3540 /-

INR 19000.0 /-

INR 9.48 Lakhs /-