|
| 1 | OUTDOOR CIVIL WORK |
| 2 | Cleaning grass and removal of rubbish up to a distance of 30 m out side the periphery of the area as per technical specification clause 201 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 4 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 |
| 5 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. |
| 7 | Providing & laying of Surkhi, Carriage for 5.0 km lead by Mechanical Transport including loading, Unloading and stacking |
| 8 | BrickworkM-150 in 1:4 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all materiall, labour and tools and plants, ect required for proper completion of work |
| 9 | 12 mm cement plaster on plinth of mix : 1:4 (1 cement: 4 coarsesand). F.M.-1.25 |
| 10 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. asrequired. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 11 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 13 | Supply & fixing of 0.9mx0.6m (approx) signage of the park installed at ht of 0.75m above ground. Retro reflective printed board on ACP sheet mounted on SS frame |
| 14 | INAUGRATION STONE GRANITE SIZE WITHING WRITUP 1200X750 MM ALONG WITH BRICK PEDESTAL |
| 15 | Providing and laying 15mm thick full synthetic Walking track with 6mm Spray coat EPDM and 9mm SBR surface bonded together including lane separator lines and marking all complete as per the requirements specification laid down. |
| 16 | Providing and fixing BRICK CLADDING on façade with adhesive and filing joints with grouting complete |
| 17 | Chequered terrazo tiles 22 mm thick with graded marble chips of sizeup to 6 mm in floors, jointed with neat cement slurry mixed with pigmentto match the shade of the tiles, including rubbing and polishing complete,on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : |
| 18 | Providing and fixing dry cladding upto 10 metre height with 30 mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Red sand stone work for wall lining etc. 30 mm thick saw cut stone |
| 19 | Supply and fixing of Sand Stone Bench (Size 1500x450x450) mm including grouting in R.C.C Block etc. all complete in direction of Engineer in charge. |
| 20 | Supply & fixing of 3.0 mm MS sheet with CNC cutting work Design as per drawing |
| 21 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade include in grubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab color of Black, Cherry/Ruby Red or equivalent |
| 22 | PROVIDING & LAYING OF SKATING RINK |
| 23 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. All kinds of soil |
| 24 | Providing and laying in 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 25 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete of M30 grade with minimum cement content of 350 kg /cum |
| 26 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 |
| 27 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 29 | Brickworkwith common burnt clay modular bricks of class designation 7.5 in foundation and plinth in 1:4 cement including supply of all materiall, labour and tools and plants, ect required for proper completion of work |
| 30 | Providing and fixing dry cladding upto 10 metre height with 30 mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Red sand stone work for wall lining etc. 30 mm thick saw cut stone |
| 31 | SCULPTURES |
| 32 | SUPPLY & FIXING OF BOOK SCULPTURES WITH INFORMATION ON LIFE OF PANDIT RAVIDAS IN FRP MATERIAL WITH 6 LAYERS |
| 33 | SUPPLY & FIXING COLOR FULL FISH KIDS PLAY SCULPTUREIN FRP MATERIAL WITH 6 LAYERS |
| 34 | SUPPLY & FIXING BEGAMPUR DUCKIN FRP MATERIAL WITH 6 LAYERS |
| 35 | SUPPLY & FIXING BEGAMPUR MUSHROOM SCULPTUREIN FRP MATERIAL WITH 6 LAYERS |
| 36 | SUPPLY & FIXING HAPPY TORTOISE SCULPTUREIN FRP MATERIAL WITH 6 LAYERS |
| 37 | SUPPLY & FIXING Statue of Sant Ravidas preaching along with 3 followers . IN HUMAN SCALEIN FRP MATERIAL WITH 6 LAYERS |
| 38 | SUPPLY & FIXING YOGA BUNNY OR CATIN FRP MATERIAL WITH 6 LAYERS |
| 39 | SUPPLY & FIXING BABY ELEPHANT SCULPTURE FOR KIDS PLAYIN SOLID FRP MATERIAL |
| 40 | SUPPLY & FIXING BOOK SCULPTURE ON BENCH IN FRP MATERIAL WITH 6 LAYERS |
| 41 | SUPPLY & FIXING Book sculpture to highlight Adi Granth and other literary contributionsIN FRP MATERIAL WITH 6 LAYERS |
| 42 | SUPPLY & FIXING DOG KIDS PLAY SCULPTUREIN FRP MATERIAL WITH 6 LAYERS |
| 43 | SUPPLY & FIXING Statue of Sant Ravidas practecing leather works.IN HUMAN SCALEIN FRP MATERIAL WITH 6 LAYERS |
| 44 | CHILDRENS PLAY AREA |
| 45 | 1.Kids Can Slide from the height of 3ft. 2.Roto Moulded LLDPE Slides are produced from UV stabilised virgin material. 3.Powder CoatedPaint is done on Platforms which is made of Galvanised Sheet with precision punched hole of 10mm.4.42, 33.3, 20& 28mm Galvanisedpipe are used for Ladder Railing with further treatment of powder coating.5. Platform Sizes used in this Slide - Mini Square platform 650X500X40MM 6.Powder Coating is done on Ladder which is made of Galvanised sheet with Triangle steps. 8. The giraffe outer structure is made 10/15 mm HDPE Sheet which is protected from colour fading and deterioration up to 5 years.14. TUV Certificated for HDPE Component15. Imported Equipment having EN 1176 Compliances.16. European Rope - Imported Equipment having EN 1176 Compliances.17. All equipment are ISO Certified. |
| 46 | 1. Diameter of this Merry-Go-Round: 4 ft.2. 33mm galvanized pipes are used for the side railing, and an 89mm middle pipe is used, with further treatment of powder coating.3. Powder coating is applied to the Merry-Go-Round base, which is made of galvanized sheet with a wall thickness of 2mm and precision punched holes of 10mm & further coating the base is covered with EPDM Flooring.4. Bearings used in the structure are made by KCI/ARB and are smoothly movable. Fixing rod diameter: 50mm.5. All nuts will be covered with nylon caps.6. The main base frame is made of MS square pipe and MS angle (40x40x2mm).7. All nuts and bolts used in the structure are made of stainless steel.8. The entire metal frame is further treated with powder coating.9. TUV Certificated for HDPE Component10. Imported Equipment having EN 1176 Compliances.11. European Rope - Imported Equipment having EN 1176 Compliances.12. All equipment are ISO Certified. |
| 47 | 1. Diameter of this Merry-Go-Round: 4 ft.2. 33mm galvanized pipes are used for the side railing3. Powder coating is applied to the Merry-Go-Round base, which is made of galvanized sheet with a wall thickness of 2mm and precision punched holes of 10mm.4. Bearings used in the structure are made by KCI/ARB and are smoothly movable. Fixing rod diameter: 50mm.5. All nuts will be covered with nylon caps.6. The main base frame is made of MS square pipe and MS angle (40x40x2mm).7. All nuts and bolts used in the structure are made of stainless steel.8. The entire metal frame is further treated with powder coating.9. European black rope (TUV certified)(16mm diameter) has aluminium connectors.10. The upper Go Round Base is made by HDPE Sheet which is protected from colour fading and deterioration up to 5 years. HDPE sheet thickness is 19mm.11. TUV Certificated for HDPE Component12. Imported Equipment having EN 1176 Compliances.13. European Rope - Imported Equipment having EN 1176 Compliances.14. All equipment are ISO Certified. |
| 48 | 1. Diameter of this Merry-Go-Round: 4 ft.2. 33mm galvanized pipes are used for the side railing, and an 89mm middle pipe is used, with further treatment of powder coating.3. The Go Round Base is made by HDPE Sheet which is protected from colour fading and deterioration up to 5 years. HDPE sheet thickness is 19mm.4. Bearings used in the structure are made by KCI/ARB and are smoothly movable. Fixing rod diameter: 50mm.5. All nuts will be covered with nylon caps.6. The main base frame is made of MS square pipe and MS angle (40x40x2mm).7. All nuts and bolts used in the structure are made of stainless steel.8. The entire metal frame is further treated with powder coating.9. European black rope (TUV certified)(16mm diameter) has aluminium connectors.10. TUV Certificated for HDPE Component11. Imported Equipment having EN 1176 Compliances.12. European Rope - Imported Equipment having EN 1176 Compliances.13. All equipment are ISO Certified. |
| 49 | 1.Roto Moulded LLDPE Horse are produced from UV stabilised virgin material. 2.89MM Galvanised pipe are used for frame with Powder CoatedPaint is done. 3.28MM Galvanised pipe are used for Handle Pipe. 4.Bearing 2 NOS OF SKF MAKE 6203 IS FIXED FOR SMOOTH FUNCTIONING5.All pipe ends will be covered with NYLON CAPS.6. TUV Certificated for HDPE Component7. Imported Equipment having EN 1176 Compliances.8. European Rope - Imported Equipment having EN 1176 Compliances.9. All equipment are ISO Certified. |
| 50 | 1.76.8MM Galvanisedpipe are used for Swing structure post with further treatment of powder coating 2.60MM Galvanisedpipe are used for Swing toppipe with further treatment of powder coating3.Durable rubber flap with triangular hook & PVC Coated chains for the safety of hands. 4. Imported Equipment having EN 1176 Compliances.5. European Rope - Imported Equipment having EN 1176 Compliances.6. All equipment are ISO Certified. |
| 51 | 1.76.8MM Galvanisedpipe are used for Swing structure post with further treatment of powder coating 2.60MM Galvanisedpipe are used for Swing toppipe with further treatment of powder coating3.33.3MM Galvanised pipe are used for Swing seat frame with Durable rubber mom seat & bucket rubberised seat for kids. 4. Imported Equipment having EN 1176 Compliances.5. European Rope - Imported Equipment having EN 1176 Compliances.6. All equipment are ISO Certified. |
| 52 | 1.47MM Galvanisedpipe are used for Swing structure post with further treatment of powder coating 2.60MM Galvanisedpipe are used for Swing toppipe with further treatment of powder coating3.42,28,33.3MM Galvanisedpipe are used for circular ring with further treatment of powder coating4.Durable rubber flap with triangular hook & PVC Coated chains for the safety of hands. 4. Imported Equipment having EN 1176 Compliances.5. European Rope - Imported Equipment having EN 1176 Compliances.6. All equipment are ISO Certified. |
| 53 | 1.Roto Moulded LLDPE Horse are produced from UV stabilised virgin material.2.Spring Base plate is of MS sheet with further treatment of powder coating3.Rider fixing with MS U Shape bracket sheet & spring.4.Rider is fixed with grouting fixing Rod.5. Imported Equipment having EN 1176 Compliances.6. European Rope - Imported Equipment having EN 1176 Compliances.7. All equipment are ISO Certified. |
| 54 | 1.Roto Moulded LLDPE Sea Horse are produced from UV stabilised virgin material.2.Spring Base plate is of MS sheet with further treatment of powder coating3.Rider fixing with MS U Shape bracket sheet & spring.4.Rider is fixed with grouting fixing Rod.5. Imported Equipment having EN 1176 Compliances.6. European Rope - Imported Equipment having EN 1176 Compliances.7. All equipment are ISO Certified. |
| 55 | 1.Roto Moulded LLDPE Cat are produced from UV stabilised virgin material.2.Spring Base plate is of MS sheet with further treatment of powder coating3.Rider fixing with MS U Shape bracket sheet & spring.4.Rider is fixed with grouting fixing Rod.5. Imported Equipment having EN 1176 Compliances.6. European Rope - Imported Equipment having EN 1176 Compliances.7. All equipment are ISO Certified. |
| 56 | 1.Roto Moulded LLDPE Dolphine are produced from UV stabilised virgin material.2.Spring Base plate is of MS sheet with further treatment of powder coating3.Rider fixing with MS U Shape bracket sheet & spring.4.Rider is fixed with grouting fixing Rod.5. Imported Equipment having EN 1176 Compliances.6. European Rope - Imported Equipment having EN 1176 Compliances.7. All equipment are ISO Certified. |
| 57 | 1. The Turtle spring rider is made 15 mm HDPE Sheet which is protected from colour fading and deterioration up to 5 years 2. Spring Base plate is of MS sheet with further treatment of powder coating 3. Rider fixing with MS U Shape bracket sheet & spring.4. The rider is fixed with a grouting Rod.5. TUV Certificated for HDPE Component6. Imported Equipment having EN 1176 Compliances.7. European Rope - Imported Equipment having EN 1176 Compliances.8. All equipment are ISO Certified. |
| 58 | Air WalkerJindal GI Pipe with GI AccesseriesSingle Main Frame:100 Nb Gi B Class Pipe. Arm Handle/ Leg Frame 25/32Nb Gi B Class Pipe.Bottom Cover:Base Cover For 100 Nb-Nylon 47 Injection Moulded. Foot Rest (Perphorated) : Galvanised 2Mm Thickness.Stopper:Pu Rod.42Mm Diapipe Cap:Nylon 47 Injection Moulded.Bearing Cap:Nylon 47 Injection Moulded Bearing Housing And Pin:Seamless Pipe & Round Bar.Nut Bolts Cap:Nylon 47 Injection Moulded WithFastners.Bearing:Permanent Sealed Of Reputed Make(Fag/Skf). Nut Bolts:M8 X 25Mm Zinc Coated Allen Bolts. We Do Pure Polyester Powder Coating (50-60 Microns) For Attractive Looks Which Is Meant For Outdoor Usage.All equipment are ISO Certified. |
| 59 | Elliptical Cross TrainerJindal GI Pipe with GI AccesseriesMain Frame:100 Nb Gi B Class Pipe.Arm Handle / Leg Frame 25/32Nb Gi B Class Pipe.Handle Cover :Tpee Injection Moulded. Foot Rest (Perphorated) : Galvanised 2Mm Thickness.Handle:L-125Mm,W-55Mm). Bottom Cover:Base Cover For 100 Nb-Nylon 47 Injection Moulded.Stopper:Pu Rod.42Mm Diapipe Cap:Nylon 47 Injection Moulded. Bearing Cap:Nylon 47 Injection Moulded Bearing Housing And Pin:Seamless Pipe & Round Bar.Nut Bolts Cap:Nylon 47 Injection Moulded WithFastners.Bearing:Permanent Sealed Of Reputed Make(Fag/Skf). Nut Bolts:M8 X 25Mm Zinc Coated Allen Bolts.We Do Pure Polyester Powder Coating (50-60 Microns) For Attractive Looks Which Is Meant For Outdoor Usage. All equipment are ISO Certified. |
| 60 | Big Shoulder WheelJindal GI Pipe with GI AccesseriesMain Frame:100 Nb Gi B Class Pipe.Arm Handle/ Leg Frame 25/32Nb Gi B Class Pipe.Bottom Cover:Base Cover For 100 Nb-Nylon 47 Injection Moulded.Wheel-Galvanised Pipe, Stopper:Pu Rod.42Mm Diapipe Cap:Nylon 47 Injection Moulded. Bearing Cap:Nylon 47 Injection Moulded Bearing Housing And Pin:Seamless Pipe & Round Bar. Nut Bolts Cap:Nylon 47 Injection Moulded WithFastners.Bearing:Permanent Sealed Of Reputed Make(Fag/Skf). Nut Bolts:M8 X 25Mm Zinc Coated Allen Bolts. We Do Pure Polyester Powder Coating (50-60 Microns) For Attractive Looks Which Is Meant For Outdoor Usage.All equipment are ISO Certified. |
| 61 | Leg Press Cum Pushup BarJindal GI Pipe with GI AccesseriesMain Frame:100 Nb Gi B Class Pipe.Arm Handle/ Leg Frame 25/32Nb Gi B Class Pipe.Handle Cover :Tpee Injection Moulded. Seat & Back (Perphorated) :Galvanised 2Mm ThicknessHandle:L-125Mm,W-55Mm). Bottom Cover:Base Cover For 100 Nb-Nylon 47 Injection Moulded.Stopper:Pu Rod.42Mm Diapipe Cap:Nylon 47 Injection Moulded.Bearing Cap:Nylon 47 Injection Moulded Bearing Housing And Pin:Seamless Pipe & Round Bar.Nut Bolts Cap:Nylon 47 Injection Moulded WithFastners.Bearing:Permanent Sealed Of Reputed Make(Fag/Skf). Nut Bolts:M8 X 25Mm Zinc Coated Allen Bolts.We Do Pure Polyester Powder Coating (50-60 Microns) For Attractive Looks Which Is Meant For Outdoor Usage. All equipment are ISO Certified. |
| 62 | CycleJindal GI Pipe with GI AccesseriesMain Frame:100 Nb Gi B Class Pipe. Arm Handle/ Leg Frame 25/32Nb Gi B Class Pipe.Handle Cover :Tpee Injection Moulded.Seat : (Perphorated) :Galvanised 2Mm Thickness. Bottom Cover:Base Cover For 100 Nb-Nylon 47 Injection Moulded. Stopper:Pu Rod.42Mm Diapipe Cap:Nylon 47 Injection Moulded.Bearing Cap:Nylon 47 Injection Moulded Bearing Housing And Pin:Seamless Pipe & Round Bar.Nut Bolts Cap:Nylon 47 Injection Moulded WithFastners.Bearing:Permanent Sealed Of Reputed Make(Fag/Skf). Nut Bolts:M8 X 25Mm Zinc Coated Allen Bolts. We Do Pure Polyester Powder Coating (50-60 Microns) For Attractive Looks Which Is Meant For Outdoor Usage.All equipment are ISO Certified. |
| 63 | Sitting Cum Standing TwisterJindal GI Pipe with GI AccesseriesMain Frame:100 Nb Gi B Class Pipe.Arm Handle/ Leg Frame 25/32Nb Gi B Class Pipe. Round Sitting & Standing (Perphorated) : Galvanised 2Mm Thickness.Bottom Cover:Base Cover For 100 Nb-Nylon 47 Injection Moulded.Stopper:Pu Rod.42Mm Diapipe Cap:Nylon 47 Injection Moulded. Bearing Cap:Nylon 47 Injection Moulded Bearing Housing And Pin:Seamless Pipe & Round Bar. Nut Bolts Cap:Nylon 47 Injection Moulded WithFastners.Bearing:Permanent Sealed Of Reputed Make(Fag/Skf). Nut Bolts:M8 X 25Mm Zinc Coated Allen Bolts.We Do Pure Polyester Powder Coating (50-60 Microns) For Attractive Looks Which Is Meant For Outdoor Usage. All equipment are ISO Certified. |
| 64 | FISH MAZE :Materials and Construction- Made from Manalapene HDPE sheets- Thickness: 15mm/19mm- Dual-color sandwich system for attractive designDimensions- Length: 800mm- Width: 734mmFeatures and Benefits- Fire/heat retardant- Waterproof- UV protected- Weather resistant- Termite resistant- Chemical resistant- Impact resistant- Safe for childrenCertifications and Compliance- TUV certified for HDPE component- EN 1176 compliance (European safety standard)- ISO certified- Meets European and American safety standards |
| 65 | SPIN TO PLAY: Materials and Construction- Made from Manalapene HDPE sheets- Thickness: 15mm/19mm- Dual-color sandwich system for attractive designDimensions- Length: 800mm- Width: 734mmFeatures and Benefits- Fire/heat retardant- Waterproof- UV protected- Weather resistant- Termite resistant- Chemical resistant- Impact resistant- Safe for childrenCertifications and Compliance- TUV certified for HDPE component- EN 1176 compliance (European safety standard)- ISO certified- Meets European and American safety standards |
| 66 | HANDLING WASTE GAME: Materials and Construction- Made from Manalapene HDPE sheets- Thickness: 15mm/19mm- Dual-color sandwich system for attractive designDimensions- Length: 800mm- Width: 734mmFeatures and Benefits- Fire/heat retardant- Waterproof- UV protected- Weather resistant- Termite resistant- Chemical resistant- Impact resistant- Safe for childrenCertifications and Compliance- TUV certified for HDPE component- EN 1176 compliance (European safety standard)- ISO certified- Meets European and American safety standards |
| 67 | ELECTRICAL LIGHTING WORK |
| 68 | S/F of 3mtr, Long decorative tree pole outdoor type complete with cdecorative pole in 3 step 100mm dia × 1.524 mtr, 80 mm dia × 1.524 mtr, and 3 nos. 50 mm dia× 0.61mtr. Long and 3 nos. aluninium leaf 0.61 mtr, long in 3 shades with 3 mps/ Suitable size hole for Water ProfLED Sport Light on leaf as given and design specification as E/I. |
| 69 | S/F of decorative pearl leaf Sculpture with leaf like slitly boul type making ofMS or al leaf in given Shades Total no ofpear leaf Sculpture6 nos, the hight should be 18 fit, 7.5 fit and widht leaf 5 fit to 2.5 fit. Leaf Mancufechring with Different type Round bar and hole for water prof LED Sport lightfixing on leaf complete with wiring with 1 Sqm Coper Cable total 6 nos. LED sport light required. designe and drawing, specification as E/I. |
| 70 | S/F of decorative metal Sun flower with 1 nos.leaf size 3 fit and width 2 fit on 80 mm dia MS pipe Structer the sun flower size 4 fit and yellow colour and red colour in midlle and Suitable size hole for water prof LED in flower or side the MS Structure and leaf pented with green colour total 3 Nos. Structure and lightes in one set Complete with wiring etc.design and drawing, specification as E/I. |
| 71 | S/F of decorative flowering sculpteure with 1 nos. one set lotus transperent and coloured perfex sheet on100 mm diaMS pipe Structer 3mtr long andthe folwers width 1.2 fit complite with Suitable size hole forwater prof LED in middle of flowerStructure and lightes in one set Complete with wiring etc.design and drawing, specification as E/I. |
| 72 | Supply &fixing of 60 watt LED Spot light with water prouf housing Die cost complete with Suitable Capicity diver set (make philips) |
| 73 | Supply & fixing of LT cable armored served sheathed cables 1100 V grade depth of 750mm below ground or cable shall be run on surface fixed on MS clampSOR 2018 SI No.501 |
| 74 | 25 Sqmm × 3.5 core |
| 75 | 10 Sqmm × 4 core |
| 76 | Supply and burring of safe earthing electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonry housing (from electrode terminal to switch board, cost of 25 × 3 GI. Strip will be extra) Make : As approved in U.P.P.W.D., & C.P.R.I. CertifiedSOR 2018 SI No. 725 (A) |
| 77 | Supply and fixing of plain or pin type copper tin plated cable socket (lug)SOR 2018 SI No. 504 |
| 78 | 25 Sqmm |
| 79 | 10/16 Sqmm |
| 80 | S/B of pole earthing with 20mm die × 2000mm long M/S Rod connected with pole by 6 to 4 swg GI wire complete.As per UPPCL |
| 81 | S/F of HDPE Pipe 4Kg./Cmsq size 63mm die.PSR at Rajghat Bridge file |
| 82 | S/F of HDPE Pipe 4Kg./Cmsq size 50mm die.PSR at Rajghat Bridge file |
| 83 | HDD Drilling by manual of mechanical method PSR at Rajghat Bridge file |
| 84 | S/F of GI wire as continuity wire.SOR 2018 SI No.628 |
| 85 | S/F of GI strip 25mm × 3mm size.SOR 2018 SI No. 716 |
| 86 | S/F of MCB DP 6 to 32 amp. CAT - ASOR 2018 SI No. 1009 |
| 87 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.Rate based on SOR 2018 SI No. 807 |
| 88 | 40 A TPN |
| 89 | S/F of 4mtr, Long decorative pole outdoor type complete with decorative pole & 60 watt LEDlight with water prouf housing Die cost complete |
