Tender For Repair Upgradation Of Electric Items At Tulip Garden Srinagar In View Of Upcoming Tulip Show - 2025- 1 Supply/Laying/Testing and Commissioning of 2 Core 25 mm sq. Al armored XLPE Insulated,PVC cable Havells/Paramount/RR Make. Including Supply/Laying of HDPE PipeISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench of standard make as approved.The cable shall include end termination lugs with its crimping /taping. (For Entry-Exist gate) 2 Design,Supply, Installation, Testing and Commissioningof CPRI Approved (IS/IEC:61439) Main LT Control single Door feeder panel outdoor type with sloped roof fabricated out of 16 gauge sheet steel. The feeder panel should have standing rain/ dust & vermin proof with gasket lockable door of 16 gauge sheet steel. The Panel should be painted with Electro static powder coated colour, Siemens grey structural with proper chemical pre-treatment with film thickness 35-40 Microns,duly fitted with Voltmeter,Phase-indicators etc& angle iron stand of 2.5 feet height above ground level and underground 1.5 ft to be grouted in cement concrete block of suitable size with the cc ratio of 1:2:4 mix. (However the angle iron stand overall height 4 ft shall be increased or decreased upto 1.5 foot depending upon site conditions)The feeder shall be suitable size in length breadth and height to be fitted inbuilt the following items:-Incoming: 63 Amp-2 pole,10kA C-CURVE MCCBHavells/L&T/Legrand/Schneide rmake as approved-01 No.Outgoing: 1) 100 Amp Suitable (P+N) Al. Bus bar2) 02 No. 32 Amp Solution with Insulated Plug & Socket P+N+E Havells/L&T/Legrand/Schneider Make as approved 3) 02 No. 16-25 Amp C-Curve DP-MCB Havells/L&T/Legrand/Schneider MakePanel shall have provision for MCB’S/entry of cables from the bottom as required. 3 Providing & Fixing of IK08 IP-66 protected high powerLED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 m/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety Power Factor >0.95 , THD(I) <10% , driver current <=750mA driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.(Philips/LT/Wipro Make)The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. 4 200 Watt 5 150 Watt 6 120 Watt 7 50 Watt 8 Supplying of IK10 IP65 protected 600 mm height (8-10)Watt LED Bolard Luminarie with base plate made of powder coated die cast aluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy ≥ 90 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal /external surge protection device of min. 4KV(L-N) and efficiency >85%, PF>0.9, THD<20% and input Voltage range of 90-270V AC at 50Hz. System life of 30000 Burning hours with 70% of Initial Lumens maintained Light output in Cool white or Warm White Colour as per engineers choice, driver current < 750mA. Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in al respect.OEM Must have its own in house NABL lab setup for al testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product /accessories from OEM shall be submitted. Al as per pre approved by Engineer in charge. (Jaguar/Havells/Equivalent Make) & Shall be approved. 9 Supply/Fixing of following wattage LED Lamps of Plain/E-14/27 Lamp of Anchor/Polycab/HG/Halonix /Jaguar Make etc complete with all sorts of carriage complete 10 12 Watt 11 18 Watt 12 Supply of 1x2.5 Sq.mmFRLSH PVC Insulated Multi Strand copper wire of Havells/Salzer/Anchor Make. 13 Supply of self-adhesive PVC electrical insulation tape of 15-20m length, fire retardant & water proof ISI Marked of Bajaj/Le-Figaro/Finolex/Equivalent Make. 14 Supply of 1.5 Sqmm 2 Core Twin Flat Speaker Cable Havells/Salzer/Anchor/Paramount Make 15 Servicing of RO Water Purifier from authorised service centre (Kent or Equivalent) b.w.o Replacement of damaged/Serviciblefollowing parts as per site requirement :- 16 Activated Carbon filter upto 20 17 RO Membranes 18 Sediment Filter Cartridge upto 20 19 FRT (Flow Restrictor Tube) 20 Hollow Fibre Membrane 21 Post Carbon Filter-Blue 22 UV Lamp 23 Booster/Diaphragm Pump 150 DP 24 SV (Solenoid Valve) 25 SMPS / Adopter 26 Elect CC Ballast Auto Flush 27 UF Membrane 28 Supply/Installation/Testing and Commissioning of 15W + LED Surface Mounted Panel light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fixtures of H.G/Jaguar/Bajaj Make.(On Existing Points) 29 Supply of IP-65 LED Strip Warm light with following Specifications: Input Wattage: 10W / Mtr,Input Voltage: 220 - 240VAC,Input Frequency: 50 Hz, Input Current (Max): 50mA, Power Factor:. > 0.95,Surge Protection:2.5KV, High Voltage Protection:300V,HI-POT:1.5KV,IP Rating:IP 65,Working Temperature:-10°C to 50°C, LED:Bridgelux,Lumen Maintenance:70% After 50000 BH,Rated CCT: 3000K, 4000K, 6500K,Rated CRI:> 80,System Efficacy:100lm/W,Housing:Silicon Pipe covers the LED Strip Light of Bajaj/Hansagreen/ Jaguar/Equivalent Make. 30 Supply of Adoptor (CV DRIVER LED STRINGS 12 V 2 A IP44)Bajaj/Hansagreen/ Jaguar/Equivalent Make.& shall be approved, 31 Restoration of existing motorized 12.5 Mtr High Mast Pole by way ofrepairing double drum type self sustaining winch, integral power tool accesible(winch motor with control circuit) and other services,making reverse/forward motor operational and resolving the jamming of ( 3 no. rope for lantern carrage & 2 no. rope for winch assembly).The Job further includes utilizing the service of crane if required at site.
