Supply, Installation, Testing And Commissioning (Sitc) Of Electro. Mech. Machineries At Mahila College Ub Pumping Station With 05 Years Comprehensive Operation And Maintenance.-1 MECHANICAL WORK SEWAGE SUBMERSIBLE NON CLOG PUMPMOTOR SET Supply, installation, testing and commissioning of non clog sewage submersible pump with SS CF8M Impeller, CI Casing to Gr 260 ,SS 410 shaft suitable for 3 Phase, 415 V, 50 Hz., AC supply submersible motor having Class F insulation and IP-68 protection.The pump shall be operated at 1450/1500 RPM speed. The scope shall include all required accessories pump vize. If req. Check valves, sluice valves,pressure gauge, automatic coupling device, guide pipes, chain with shackle,thrust block , round submersible cable upto starter panel through suitable size GI pipe (6mm, 12 core round copper counductor, PVC insulated power cable of reqd size for each pump motor set) with necessory electrical connections as per specification. The pump set shall be provided along with automatic shut down arrangement when water level in sump go down to the minimum water level (MWL)The scope also includes providing civil foundation for duck foot bend(if Required other wise Sutaible Stand) for auto coupling etc & any other required minor civil modification /rectification /thrust blocks/finish work to completethe work. Overall Efficiency at Duty : 82 %.delivery pipe size 200mm dia Pump Capacity : Discharge 360 m3/hr , Head: 12 m, ( 5W + 1S ) Motor Rating: 30 HP / 22.50 kW , Over all Efficiency at Duty : 70 % ,Make: KIRLOSKAR, KSB, JASCO, KISHOR, GRUNDFOSS, AQUA. 2 MOTOR CONTROL PANEL OR STARTER Motor control panel or fully automatic star-delta starter with necessary electrical connections and electrical control panel with starter overload relay range 28-42 ampere including individual MCB , analog volt meter with selector switch, analog ampere meter with selector switch, SPP, PMU, capacitors, phase indicators, as well as digital meters as per GWSSB standard specification for 30 HP non- clog pump motor set. make :L&T ,Siemens, ABB. schniders, switchgears. 3 MCCB 315A 4 pole MCCB with micro processor release with sheet steel enclosure , make :L&T ,Siemens, schniders,C&S. 4 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (1) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) 5 Supplying & erecting XLPE (IS:7098) (I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. (1) 4 core 16 Sq. mm 6 Supplying & erecting XLPE (IS:7098) (I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. (1) 12 core 4/6 sq.mm 7 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (1) 2 to 4 core 25 Sq. mm 8 Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (1) 3 & 1/2 core 185 Sq. mm 9 Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 1.5/2.5 to 6 Sq.mm (1) 16 Sq.mm. (2) 185 Sq.mm. 10 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (1)63A. 11 providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. With metal Enclosure 12 Providing & erecting capacitor duty contactor 3 phase, 415 V with proper connection for following rating:(1) 15 KVAR 13 Supplying & erecting approved make Four Pole 415V change over switch with operating mechanism A.C.23 duty confirming to IS for with Enclosure (1) 400A 14 Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete. 15 MONORAIL WITH Manual CHAIN HOIST Supply, installation, testing, commissioning of Manually Operated Chain Hoist & Electrically operated Trolley, suitable to operate on Mono Rail Girder, complete with Manually operated chain hoist & Manually operated geared trolley, brake, chain-gear, Note: Capacity of CPB hoist shall be minimum as specified or min.1.5 times the weight of single heaviest component to be lifted at Pump location whichever is higher. Capacity : min. 1 Ton. As required Lift : 12.50 m. (min) Make:- Morris / Indef / Safex / WH Brady /Anker / Max / Japs 16 Manufacture supply and delivery, lowering & laying of submerged arc welded M.S pipe out side coated with best quality Bituminus Paint with Epoxy coating to inside pipeline with two parts of Solvent free high build liquid epoxy lining as per AWWA C210-07 suitable for portable water application & shall be approved by CFTRI India/BS 6920-UK/international standard/NSF/ANSI/-61 2004 to be fit for contact with portable water for consumption with 406 micron thickness, having a beveled ends plate and coil conferming to is 3589-2001 or its latest revision /ammendment for following thickness including all taxes , transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to Departmental stores/ site, stacking, etc. including specials and wastage etc.; complete Tender Specifications: Make:- Essar / Tata Jindal / SAIL / Zenith / Asian (1) 150mm OD, 4.85 mm Thickness 17 M.S. specials plain/ Flanged ended Erection, Installation, Testing & Commissioning of M.S. Specials for Delivery, By Pass & Header Piping with Flanges, eccentric Nozzles, Nut-Bolts, Y –tee connection, puddle flanges etc. Complete. Up to 200mm dia 18 Ultrasonic Level Sensor. 1 Plant / Pump Operator Semi Skilled person. ( 1 person x 3 Shift = 3 Person per day) (June-November) 2 Plant / Pump Operator Semi Skilled person. ( 1 person x 1 Shift = 1 Person per day) (December-May) Total Manpower cost for 1 Month of entire package
