Tender For Furniture Works At Multi Storey Super Speciality Hospital Building At Sir Jj Hospital Campus, Byculla, Mumbai.- 1 Low Height StorageTYPE-1Providing and fixing 60cm Deep Low Height storage cabinet at required location made by using 19 mm thick marine Ply including shelf of 40 cm to 45cm centre to centre of requisite manufacture viz Anchor/century/kenwood or equivalent generally confirming to IS 710-1980 BW-P 710for frame, internal verticals, horizontal divisions & openable shutters. 12 mm thick BWP-710 grade ply for drawers at top(as shown in drawing) with back and drawer base covered with 6mm thick BW P- 710 grade ply. The total shall be finished with 1 mm thick white laminate for internal finish and 1.25 mm thick laminate for external finish with necessary fixtures and fastenings viz., Hinges, handles, locks, magnets etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts) 2 Low Height StorageTYPE-2Providing and fixing 60cm Deep Low Height storage cabinet at required location made by using 19 mm thick marine Ply including shelf of 40 cm to 45cm centre to centre of requisite manufacture viz Anchor/century/kenwood or equivalent generally confirming to IS 710-1980 BW-P 710for frame, internal verticals, horizontal divisions & openable shutters. 12 mm thick BWP-710 grade ply for drawers of 12.5 cm depth fitted at top (as shown in drawing) with back and drawer base covered with 6mm thick BW P grade ply. The total shall be finished with 1 mm thick white laminate for internal finish and 1.25 mm thick laminate for external finish, necessary fixtures and fastenings viz., Hinges, handles, locks, magnets etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts) 3 Low Height StorageTYPE-3 Providing and fixing 60cm Deep Low Height storage cabinet at required location with combination ofshelf at 40 cm to 45cm c/cwith 1 drawers at top, 8 drawers at other end with provision of openable solid/ louvered shutters as shown in drawing with 19 mm thick ply of viz Anchor/century/kenwood or equivalent generally confirming to IS 710-1980 BW-P 710 for frame, internal verticals, horizontal divisions & for openable shutters of size 40 cm to 45cm centre to centre. 12 mm thick BWP-710 grade ply for drawers. 6mm thick BW-P ply for cabinet back and drawer base. The total shall be finished with 1 mm thick white laminatefor internal finish and 1.25 mm thick laminate for external finish, necessary fixtures and fastenings viz., Hinges, handles, locks, magnets etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts). 4 Overhead Storage CabinetProviding and fixing 45cm Deep overhead storage cabinet at required location made by using 19 mm thick 710 BW-P grade ply of requisite manufacture viz Anchor/century/kenwood or eqivalent generally confirming to IS 710-1980 for frame, internal verticals,horizontal divisions, openable shutters with shelves provided at 40cm to 45cm centre to centre.Back covered with 6mm710 BW-P grade ply.The total shall be finished with 1 mm thick white laminate for inernal finish and 1.25 mm thick laminate for external finish andnecessary fixtures and fastenings viz., handles, locks, etc as per detailed design and drawing and instructions of Enginner in charge etc. complete (Including all leads and lifts) 5 Executive Tables Providing and fixing in position Different size Executive tables (As shown in drawing)made out of 19mm thick 710 BW-P grade plywood of the requisite manufacture i.e. Anchor/ Century/ Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for top , vertical and other sides and 12mm thick 710 BW-P gradeplywood for key board trayalong with electronic storage and wire manager (as shown in drawing).The total shall be finished with 1 mm thick white laminatefor internal finish and 1.25 mm thick laminate for external finish with necessary fixtures and fastenings etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts). 6 Executive Tables (With side Runner)Providing and fixing in position Different size Executive tables with runner (As shown in drawing)made out of 19mm thick 710 BW-P grade plywood of the requisite manufacture i.e. Anchor/ Century/ Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for top , vertical and other sides and 12mm thick 710 BW-P gradeplywood for key board trayalong with electronic storage and wire manager (as shown in drawing).The External shall be finished with 3.5mm to 4mm thk veneer sheets including melamine polish and internal shall be finished with 1mm thk white laminate withnecessary fixtures and fastenings etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts). 7 Reception TableProviding and fixing in position Reception Table of different sizemade out of 25mm thick 710 BW-P plywood of the requisite manufacture i.e. Anchor/ Century/Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for table top &vertical side , 19mm thick 710 BW-P ply for standing desk , 12 mm710 BW-P plywood for keyboard sides , for vertical file storage & keyboard base .Total is finished with 2mm thick acrylic sheet for table top & inverted desk andwith 1 mm thick white laminatefor inernal finish and 1.25 mm thick laminate for external finish with all necessary hardware viz., drawer channels, handles, locks,cable manager etc as per drwaing,specifications and instructions of Engineer In- Charge etc. complete. (Including all leads and lifts) 8 Nurse Station/Workstation Providing and fixing in position Nurse station/Workstation Table of different sizemade out of 25mm thick 710 BW-P grade plywood of the requisite manufacture i.e. Anchor/ Century/Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for table top &vertical side , 19mm thick 710 BW-P grade plywoodfor standing desk , 12 mm marine plywood for keyboard sides , 6 mm marine plywood for vertical file storage & keyboard base.Total is finished with1 mm thick white laminate for internal finish and 1.25mmlaminate sheet for all externalsides .necessary hardware viz., drawer channels, handles, locks,wire manager etc as per drwaing, specifications and instructions of Engineer In- Charge etc. complete. (Including all leads and lifts) 9 Pin Up board - Providing and fixing of pin -up board having Good Quality Fabric with lamination of 3mm Foam, core matrial of Good Quality Soft Board 12mm thick,Framing: Anodized extruded aluminum in round shape with plastic ABS corner.(Including all leads and lifts) 10 Mobile TrolleyProviding and fixing in position mobile trolley 50 mm deep made out of 19mm thick 710 BWP Plywoodof the requisite manufacture i.e. Anchor/ Century/ Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for top , front, back & vertical sides ,12 mm thick 710 BWP plywoodfor drawer sides and 6mmthick710 BWP plywoodfordrawer base along with four table caster wheels at bottom.All sides shall be finished with 1 mm white laminate internally and 1.25 mm thick laminate for external finish necessary fixtures and fastenings viz., handles, locks, magnets etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete. (Including all leads and lifts) 11 Meeting Room Table Providing and fixing in position meeting table ofDifferent sizemade out of 25 mm thick 710-BW-P grade Marine plywood of the requisite manufacture i.e. Anchor/ Century/ Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for top ,70 x 45 mm TW battens for vertical legs .The total shall be finished with 3.5- 4mm thick veneer sheet internally and externally with grooves & two coats of melamine polish along with electronic storage tray ,aluminium flip up & concealed junction box etc.As per detailed design and drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts) 12 Conference Table Providing and fixing in position Conference table ofDifferent sizemade out of 25 mm thick 710 BW-P grade Marine plywood of the requisite manufacture i.e. Anchor/ Century/ Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for top , 19mm thk 710 BW-P gradeply for supporting Vertical sides.Table has thick panel legswith veneer finish. It also includes in built wire management boxes with power and data ports.The total shall be finished with 3.5- 4mm thick veneer sheet internally and externally including melamine polish over itas per detailed design and drawing and instructions of Enginner in charge etc. complete.The manufacturer shall have quality and safety assurance like ISO‐9001:2015, ISO‐14001:2015 and ISO‐18001:2007, BIFMA membership and AIOTA certification. (Including all leads and lifts) 13 Wooden Cladding on Wall with laminate Providing and fixing Plywood Wall Claddingusing 1.25 mm thick laminate Sheet on one side, 6 mm thick 710- BWP gradeplywood, including C.C.T.W. 50x 25 MM frame600 mm centre to centre includingfinishingwithetc. complete as per drwaing,specifications and instructions of Engineer In- Charge etc. complete.(Including all leads and lifts) 14 Wooden Cladding on Wall with Veneer Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition coveredby6mmthickmarineplywoodofthegenerallyconfirimingtoI:S710-1980 finishedwith3.5to4mmthickmatchingVeneerofapprovedcolorandinsatinwallnut groovmatchedveneerpatternanddesignincludingmelaminepolishing&designwith antitermitetreatmentetc.toplywoodandwoodworkwithtenyearsguaranteebondetc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge.(Including all leads and lifts) 15 Bison Board PanellingProviding and fixing 8mm thick Bison board Panelling with overall minimum thickness of 66mm of Aluminium pipe frame size 50x50mmat 600mm centre to centre. etc as per detailed design ,drawing and instructions of Enginner in charge complete (Including all leads and lifts) 16 HIPS Panelling: Providing and fixingHIPS panelling 8 x 5,12 mm thick, EuroPratik or similar make, wooden louvered look or as per selection stuck on 12mm thick marine ply backingof the requisite manufacturer Viz Anchor/Century/Kenwood/Greenlam/Duro/ Jet or equivalent generally Confirming to IS 303/ IS710-1980 etc as per detailed design and drawing and instructions of Enginner in charge etc. complete with guarantee of 10 years. (Including all leads and lifts) 17 Wallpaper Providing and pastingwall paper of Marshalls or similar make on existing surface of walls/ partition by preparing the surface in smooth and level including pesting the wall paper of approved colour/ shade and design in proper cutting shade by using required adhesive to pesting the paper etc. complete.(Including all leads and lifts) 18 Toughened glass 8mm Supplying glass table top 8 mm thick in required size and shape including finishing the all side edges machnically smoothly etc. complete As per d instructions of Enginner in charge etc. complete (Including all leads and lifts) 19 Aluminium full ht Partition Wall with Laminate finish Providing and fixing 6 mm thick 710 BW-P grade plywood(Century/ Anchor/ kenwood/ Duro/ jet or equivalent make) partitions wall using 1.25 mm thick laminate Sheet on both side with or without grooves externally,overall minimumthickness of partition 70mm using 50x 50 mm aluminum framing at 600 mm centre to centre includingfinishing with wooden Moulding to plywood and wood work andas per drwaing,specifications and instructions of Engineer In- Charge etc. complete.(Including all leads and lifts) 20 Aluminium Partition Wall with VeneerProviding and fixing 6 mm thick 710 BW-P grade plywood(Century/ Anchor/ kenwood/ Duro/ jet or equivalent make) partitions wall using 3.5-4mm thk veneer Sheet on both side with or without grooves externally,overall minimumthickness of partition 70 mmthick,using50x 50 mm aluminum framing at 600 mm centre to centre including finishing with wooden Moulding to plywood and wood work andas per drwaing,specifications and instructions of Engineer In- Charge etc. complete.(Including all leads and lifts) 21 Wooden Partition Wall with Partly vennered and partly glazed Providing and fixing Country cut teak wood partly veneered and partly glazed partition with 75mmx50mmframeat60cmcenterand9mmthickcommercialplyonbothsides, decorative veneer of 4 mm thick and plain glass 5 mm thick, including French polishing etc.complete (Including all leads and lifts) 22 Aluminumpartitions,partlyglazedand partly laminatedProvidngandfixinginpositionanodisedextrudedaluminumpartitions,partlyglazedand partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixedwithaluminum glassclips12mm x12mm andrubbercushioningbeadingtoglass partitions as per approved drawing etc. compete (Including all leads and lifts) 23 Toughened Glass PartitionProviding and fixing Toughned glass partition having more than 1.34m at required location by using 12mm thk clear/plain glass including edge polishing with necessary stainless steelheavy typepatch fitting to hold the glass as per drwaing,specifications and instructions of Engineer In- Charge etc. complete.(Including all leads and lifts) 24 Frost filmProviding & Fixing frosted film manufactured by 3 M approved equivalent on glass partition wherever required as per the instruction of Architect.etc complete as per instruction of enginner in charge etc. complete. (including all leads and lifts) 25 Wooden flooringProviding and fixing 18mm thk solid wood (strips)18mm thk flooring with V Grooved of approved shade on built up floor including fixing ,finishing with 50mm skirting etc complete. As per detailed design and drawing and instructions of Enginner in charge etc. complete (Including all leads and lifts) 26 PU Polishing Providing and applying PU polish to new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed 27 Melamine polish Providing and applying melamine polish of required finish to the woodwork by spray machine including knotting and preparing the even surface by scraping, applyingFrench polish , scaffolding if required etc. complete. 28 High back chair (A+C )Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholster etc complete as per approval of engineer in charge 29 Medium back chair (B) supplying on site medium back chair ofSEAT/BACK ASSEMBLY: The seat is made up of 1.2 cm. thick hot pressed plywood upholstered with fabric and moulded Polyurethane Foam. The back is made up 1.2-cm. thk. hot pressed plywood upholstered with replaceable fabric upholstery covers and moulded polyurethane foam. The back ply and foam is designed with contoured lumber support for comfortable seating posture. SEAT SIZE : 51cm. (W) X 48cm. Mid back Size 48cm. (W) X 64.5cm (H) etc complete as per approval of engineer in charge 30 Medium back chair (D) Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery etc complete as per approval of engineer in charge 31 Auditorium chairBack: (W)47.5 cm x (H)80.0cm x 12.5cm(T),Seat : (W)45.0cm x (D) 48.5cm x 14.5(T), Overall Dimensions Seat Height - 43.0 cm. The seatrest assembly shall be 1.2±0.1 cm thk. flat plywood measured as per QA method described in OCP-QLTA-P14-18 and insitu-moulded with polyurethane foam & shall be upholstered with 3 layered foam laminated fabric and injection moulded cover. The seat shall be auto tip-up type and folds when not in use. The Seat profile shall be developed to help the users to get necessary comfort in popliteal region. The size of seat shall be: 45.0 cm. (W) x 48.5 cm (D) x 14.5 cm (T) Approx. The backrest assembly shall be made up of 1.2±0.1cm thk flat plywood measured as per QA method described in OCP-QLTA P14-18 upholstered with 3 layered foam laminated fabric and injection moulded back cover. The back foam shall be designed with contoured lumbar support for extra comfort.The size of back shall be: 47.5 cm. (W) x 80.0 cm (H) x 12.5 cm (T) Approx. The HR polyurethane foam for Seat and Back shall be moulded with Density= 48 +/- 2kgs/m3. The leg frame assy shall be fabricated from M.S. tube 6.0±0.03cmx4.0±0.03cmx 0.2±0.016cm thk. welded with grouting member. It shall be black powder coated (DfT40-60 microns) & grouted to the floor using anchors. It shall consists of the following:a) P.U. ARMREST: The armrest shall be made up of black integral skin Polyurethane with 65+/-10 Shore A hardness and reinforced with M.S. insert fixed with leg frame. The armrests shall be scratch and weather resistant. The armrest shall be available with cup holder. b)ARMREST CLADDING: The armrest cladding shall be made up of 0.9±0.05cm thk particle board & upholstered with fabric.All steel components are Epoxy Polyester Powder Coated (DFT 40-60 microns). The 3 layered foam laminated fabric shall be available in two shades - Ruby Red and Azure Blue - so as to create desired patterns in the layout. The auditorium chair shall be designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368.Overall Dimensions shall beSeat Height - 43.0 cm, Height - 107.0cm, armrest c/c - 54.6 cm, Width & Depth as measured from pedestal - Width-64.0cm and Depth-67.5 cm. etc complete as per approval of engineer in charge 32 Attendent couch Supplyingattendent couch on site made up of solid wooden frame of size 1890 x 660 x 600 mm or equivalent area.couchmade up of sheesam wood fully uphostered with high density foam and soft comfartable fabricwith cushion back and seatingas per reference design and as per approval of engineer in charge etc complete as per approval of engineer in charge 33 Play Area Sitting Supplying Play area Set up with chairs, on site Puffies & Cubes , crawling mat flooring, Kids area toys like slider, horse swing etc.(Color as/app)as per design, drawing and instructions given by Engineer in charge 34 Side Table 450 x 450 x 450H mmSupplying Side Table on site of top 24mm thkmade up of HIGH DENSITY PLYWOOD with sturdy rubberwood underframe with curved legs and walnut finishetc complete as per reference design & as per approval of engineer in charge.size 450 mm x450 x450 mm (P) 35 Side Table 450 Dia x 450H mm (P1) 36 Side Table 600 x 600 x 450H mm (P2) 37 Training Room chairSupplying training room chair Back: (W)38.5 cm x (H)27.0cm, Seat :(W)38.5cm x (D) 39.5cm Overall Dimensions of Chair Seat Height - 48.0 cm. Height - 85.5cm. Width & Depth of Chair as - Width-54.0cm and Depth-67.5 cm.The seat and back shall be made from seasoned wood and plywood. The same shall be upholsteredwith black synthetic leather and polyurethane foam. The Backsize shall be:38.5cm. (W) X 27.0cm. (H). and Seat size shall be:38.5cm. (W) X 39.5cm. (D). Cane shall be produced from blends of High and Low Density Polyethylene. The Cane high tensile strength at break shall be = 1400 Kg/cm2 (min.) & Elongation at break 54% maximum. The wooden desklet shall be made of 1.8 ±0.05cm. thk. solid marine plywood with 0.15 ±0.03cm. thk. P.V.C lipping all around. Size of desklet shall be 54.0±0.1cm. (W) X 29.0±0.1cm. (D). The one-piece armrests shall be made of blackintegralSkin polyurethane foam with 50-70 Shore hardness and reinforced with M.S. insert. The armrests shall be scratch and weather resistant. The assembly shall be a frame made of dia 2.54 ±0.03cm. x 0.2 ±0.016cm. thk. M.S. E.R.W. tube. and a welded leg tube forming the armrest tube made of dia 2.54 ±0.03cm. x 0.2 ±0.016cm. thk. M.S. E.R.W. tube to the form the completeassembly, which shall be powder coated (DFT 40-60 microns). The desklet shall be fitted on the right hand side armrest-cum leg tube. The paper tray shall be made of dia 0.4 +0/-0.005cm. M.S. wire spot welded to form a mesh.It shall be black powder coated ( DFT 40-60 microns ).Size of paper tray shall be: 35.0±1.0cm. (W) X 36.0±1.0cm. (D). X 12.5±1.0cm.(H). Overall Dimensions of Chair shall beSeat Height - 48.0 cm, Height - 85.5cm, Width & Depth of Chair as measured from pedestal - Width-54.0cm and Depth-67.5 cm.etc complete as per approval of engineer in charge 38 Centre table of different sizes Supplying centre Table of different sizes top 24mm thkmade up of HIGH DENSITY PLYWOOD with sturdy rubberwood underframe with curved legs and walnut finishetc complete as per reference design & as per approval of engineer in charge. size 1200 mm x 600 x 450H mm (R) 39 size 1200 mm x 1200 x 450H mm (R1) 40 size 1500 mm x 750 x 450H mm (T) 41 Centre tableSupplying Center Table on site of size 900 x 450 mmGlass Top supported on SS spacer as per reference design & as per approval of engineer in charge.etc all complete.(Color as/App.) 42 Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length:182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seatas per approval of engineer in charge.etc all complete.(Color as/App.) 43 Single seater patient easy sofa 152x84x76(H) CmSupplying single seater sofa cum bed on site fully upholstered with leatherite of size 914 D x 978 w x 864 H mm seat depth 635 mm made up of steel frame and sturdy wooden legs with high density foam and soft comfortable fabric with wheels for smooth slidingwith cushion back and seat as per reference design and as per approval of engineer in charge 44 Double seater sofaSupplying double seater sofa on site offully upholstered with leatherite/fabric of size 1360 W x 850 D x 890 H x 420 seat ht. frame made up of solid sheesam honey finish with padded arm and cushion back as per drawing and instructions of Engineer in charge etc all complete(Color as/App.) 45 Waiting chair with cushion SEAT/BACK SHELL: It is powder-coated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness with circular perforations.The Side Bar is made of cold rolled M.S.sheet 0.12 ± 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts.SEAT SIZE : 50.0 cm (W) x 45.5 cm (D) as per drawing and instructions of Engineer in charge etc all complete(Color as/App.)BACK SIZE : 50.0 cm (W) x 56.0 cm (H)CROSS BEAM: It is made up of cold rolled steel with 0.2 ± 0.02 cm thickness. The crossbeam is powder coated. It is covered with plastic end capsLEG: It is made up of cold rolled steel with 0.12 ± 0.013 cm thickness. It is powder coated. The legs are fitted with leveller cups covered with SS304 sheet.ARMREST: It is made of SS304 round tube of Ø 3.175 ± 0.03cm x 0.12 ± 0.013 cm thick formed to make an oblong shape.WIDTH (W): 173.5 CM. DEPTH (D): 74.0 CM.HEIGHT (H): 91.0 CMSEAT HEIGHT (SH): 44.0 CM. as per drawing and instructions of Engineer in charge etc all complete(Color as/App.) 46 Bunker bed Supplying Bunker bed on site 2056(W)X940(D)X1600(H), Bed Stead Ht (H1) 400, Tier Height (H2) 850 as per reference design & as per approval of engineer in charge.etc all complete. 47 Four seater dining table with chairs Dining table- Supplying FOUR SEATER DINING TABLE on site squarish1060x 1060 x 760mm or equivalent areatop marble finishsupported by solid wooden frame in melamine polish and legs are attached with nylon buffers at the bottom along with 4 chairs made of solid wood of size 450 x 400 x 950mm .in melamine polish and cushioning at back and seat etc all complete as per referencedesign & drawing and directed by Engineer in charge 48 Dining Café table with chairsDining table- Supplying FOUR SEATER DINING TABLE on site squarish1500x 900 x 760mm or equivalent areatop marble finishsupported by solid wooden frame in melamine polish and legs are attached with nylon buffers at the bottom along with 4 chairs made of solid wood of size 450 x 400 x 950mm .in melamine polish and cushioning at back and seat etc all complete as per reference design & drawing and directed by Engineer in charge 49 Café table Relish Table With SS Top 1200 W size shall be1180 Width mmx 750 Depth mmx 750 Height mm.The top shall be in Stainless Steel brushed finish with PLB insert for Durability . Easy to clean and maintain hygiene . The Understructure shall have side frames shall be made from 30 mm x 30 mm x 1.5 mm thick MS Powder Coated tubes at base which are welded and are fixed to top with screws . The bottom ends are closed with plastic bottles .MS Shade : S/G Metallic DarkGrey . The Cross Member shall be made from 30 mm x 30 mm x 1.5 mm thick MS powder coated tube , which is welded and bolted to side frames . etc all complete as per reference design & drawing and directed by Engineer in charge 50 Café table chair Supplying cafe chair ofSEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H).The Seat and Back should bemade up of injection moulded indoor grade PolyPropylene compoundThe powder coated ( DFT 50±10 microns ) welded tubular frame should bemade from 0 2.22 ± 0.03 cm x 0.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm stainless steel 202 grade tube. The shoes should bemade of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of ChairSeat Height - 45.0 cm.Height - 84.5cm.Width-52.5 cm and Depth-55.8 cm. etc all complete as per reference design & drawing and directed by Engineer in charge 51 two seater Waiting chair Public Seating Chair. - 2 SeaterProviding and Fixing 2 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finishetc all complete as per reference design & drawing and directed by Engineer in charge 52 Three seater waiting chairPublic Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. etc all complete as per reference design & drawing and directed by Engineer in charge 53 StoolStool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. As directed by Engineer-in-charge One Number 2617 0 1889 Furniture 51.52 Alluminium foldable ladder for store etc all complete as per reference design & drawing and directed by Engineer in charge 54 Café high stoolSupplying on site Cafe High Stool Fiber with SS Legs as approved as per reference design & as per approval of engineer in charge.etc all complete. 55 Cup Board for Apparatus Providing and supplying steel cupboard of 20 guage of size 78Hx36wx90D having adjustable shelfs and two steel doors with glass panelling with three way bolting device built in lock with 2 keys and full body double powder coated finish etc. complete as per referance drawing and Instructions on Enginner in charge etc complete (including all leads and lifts) 56 2 door PLU (personal locker unit) Supplying Locker unit of Overall size of 2 - Door PLU + Lkr (Base)=380mm(W)x450mm(D)x1830mm(H).DMX Drg.- PL 13-A4-33797,R1 - 4 Sheets(Cam Lock)DMX Drg.- PL-13-A4-36467,R1-4 Sheets(Hasp.)Overall size of 2 - Door PLU + Lkr (Base) shall be 380mm(W)x450mm(D)x1830mm(H).DMX Drg.- PL 13-A4-33797,R1 - 4 Sheets(Cam Lock) DMX Drg.- PL-13-A4-36467,R1-4 Sheets(Hasp.) Stackability shall have add- on units that can be stacked width wise to form bank of lockers having common side panel. Locking shall have 10 Lever cam lock with lock lever plus option of hasp arrangement . Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid Knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Handle/Label holder shall be Aesthetically appealing Snap fit ABSplastic handle . Ventilation shall be attractive punched pattern for ventilation . 1 Hanging rod in both compartment as per reference design & as per approval of engineer in charge.etc all complete. 57 4 door PLU (personal locker unit) Supplying Locker unit of Overall size of 4 - Door PLU + Lkr (Base)=380mm(W)x450mm(D)x1830mm(H).DMX Drg.- PL 13-A4-33797,R1 - 4 Sheets(Cam Lock) DMX Drg.- PL-13-A4-36467,R1-4 Sheets(Hasp.) Overall size of 4 - Door PLU + Lkr (Base) shall be 380mm(W)x450mm(D)x1830mm(H).DMX Drg.- PL 13-A4-33797,R1 - 4 Sheets(Cam Lock) DMX Drg.- PL-13-A4-36467,R1-4 Sheets(Hasp.) Stackability shall have add- on units that can be stacked width wise to form bank of lockers having common side panel. Locking shall have 10 Lever cam lock with lock lever plus option of hasp arrangement . Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid Knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Handle/Label holder shall be Aesthetically appealing Snap fit ABSplastic handle . Ventilation shall be attractive punched pattern for ventilation as per reference design & as per approval of engineer in charge.etc all complete. 58 M.S. Angle storage rackSupplying& ProvidingM.S. metal slotted angle rack on site of size 2 x 1m with adjustable GI sheet metal shelves fitted with nuts and boltsas approved as per reference design & as per approval of engineer in charge.etc all complete. 59 Door mat Supplying and providing Foot Matt of size 2.5 x 1.5/ required size etc complete as per instructions of enginneer in charge 60 Coir foot matSupplying and providing Coir foot matt of size 3x2/ required size etc complete as per instructions of enginneer in charge. 61 Rolling Dust binWHEEL DUSTBIN 120 LTR. Capacity120 Ltr. Made from superior material quality and workmanship, low dead weight, user friendly. These are the outstanding features of the wheel plastic container. Wheels are made from solid rubber tyres 62 Small mesh Dust bin Providing and supplying 19ltr metal mesh open top dust bin of size 235 x265 x 3190mm or of equivalent size made up of strong durable ,corrossion resistant metal as approal and as instructions of engineer in charge 63 Waste bin Providing and supplying 80 ltr dry , wet waste bin set(2 nos.) made up of strong durable plastic as approval and as instructions of engineer in charge 64 Towel ring Supplying and providing Towel Ring Brass CP of required size with necessary fasternes and fixturesetc complete as per instructions of enginneer in charge. 65 Stainless steel Grab BarProviding and fixing Stainless steel 304 grab bar heavy duty for bathroom handrailing and safety for elderly 12 inchwith necessary fasternes and fixtures etc completedetc complete as per instructions of enginneer in charge. 66 Roller blinds of FabricksMaking and providing by fixing roller blinds fabricks curtains for window in approved sample by using powder coated rod and machinical system with chain for opening / closing moments of the blinds and fixing properly at sites and at director Engineer in charge. 67 Roller blinds of wooden Making and providing by fixing roller blinds of wooden with corded connection type in solid patternsfor window in approved sample by using powder coated rod and machinical system with chain for opening / closing moments of the blinds and fixing properly at sites and as directed Engineer in charge etc complete 68 Mirror Providing and fixing 6mm extra clear mirror of Saint Gobain/ Asahi or equivalent make on 12mm marine ply of Greenlam/Century or eqivalent make backing fixed with invisible studs of reputable brand with approval of engineer in charge.all commplete 69 Acrylic desk Providing and Supplying Acrylic Desk for Tables (Material supplied should be standard company)on site etc complete as per instructions of enginneer in charge. 70 Hydraulic door closerProviding and Supplying Hydraulic door closer (Material supplied should be standard company)on site with necessary fasternes and fixturesetc complete as per instructions of enginneer in charge. 71 foot rest Providing and supplying foot rest below table as per approved typical drawing size and height using commercial plywood 18 mm thick with french polishing and finishing etc complete 72 Brass corner profile Providing & Fixing Brass corner profile of required size approx 25 mm X 25 mm with adhesive All complete as per instruction of architect and Engineer In charge. 73 Pigeon Hole RackProviding and fixing in position baggaging rack of size 300Wx3070Lx2100H model name Pigeon hole having side, top, bottom and shelf panel made up of 19mm thick Pre-laminated marine ply of Century or Anchor make (BWP710 grade) and back panel made up of 19mm thick Pre-laminated marine ply and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The compartment size shall be approx. 275mm X 275mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality. Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. .etc all complete as per instructions of engineer in charge 74 Notice board Providing and fixing on site notice board made out of 6 mm marine ply of the requisite manufacture generally confirming to I.S.310/I.S.710-1980 backing and 12 mm thick soft board covered with tapestry/up to Rs. 200 per meter including necessary lipping (BTC), moulding, hardware, polishing etc. and Antitermite treatment to plywood and woodwork with ten years guarantee bond etc. including all leads & lifts etc. complete as per Architect Drawing and instructions of Engineer in Charge 75 PodiumProvding & fixing Podium where ever required of size 600x600x1275mm height with following specification table top,side & bottom-18mm thick plywood with Fomica laminated sheet & CCWT battens 25x12mm moulding ,including all leads and lift setc.complete as per drawing and as directed by engineer in charge 76 Inaugaration stoneProviding and fixing inaugaration Plate/stone of size 750*1500 mm/or of required size With pelmet and Curatin as per approved design etc all complete as per instructions of Engineer in Charge 77 Letters for namingProviding and supplying letters for naming on Out Side Wall - Name in English and Marathi Made in form of 25mm depth 900mm high box type of requiredMetal and finish with necessary light arrangement including all fixtures and fittings as per instruction of Enginner in charge.e.g b) SUPERSPECILITY HOSPITAL SIR J J GROUP OF HOSPITALS BYCULLA MUMBAI. 78 Stone VeneerProviding and fixing stone veneerof 2mm thk in required size and required position as per arch drawing and instructions of enginner in charge etc complete including all leads and lits. 79 Double step stool Providing and supplying Bed side double step stool of size 50 x 45 x40 cm made of heavy duty metal with pretreated epoxy powder coated anti corrossive metal with stiff rubber legs base. The height of single step of around 20cm with anti slippery/Anti skid metal finish and as per design and instructions of Engineer in charge.etc complete
