Tender For Provision Of Certain Minor Works Under Ge Amritsar; 1 Material and labour for point wiring for One light point/Fan point controlled by one switch/regulator complete with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housingswitches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as specified and directed for the following:-NOTE: (i)Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates.(ii)Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item. 2 Supply and fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed. 3 Supply and fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type complete, all as specified and directed. 4 Supply and Fixingceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete, all as specified anddirected. 5 Material and labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 4 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete, all as specified and directed. 6 Supply and Fixing MCB of SP 6 to 32 Amps current carrying capacity, 240V, 10KA C curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site complete, all as specified and directed. 7 Supply and fixing sub main wiring with 2 runs of 2.5 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 2.5 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site complete, all as specified and directed.NOTE: Two runs of 2.5 sqmm copper cable and one run of 2.5 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length 8 Supply, install & testing exhaust fan air fresh fan made out of PVC plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1400 RPM, Copper winding of sweep 250mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan complete all as specified and directed. 9 Cutting of Wall as requirement at site for fixing of Exhaust fan complete all as specified and directed by Engr-in-Charge.Note :- The cost of making good of distributed surface of wall as per existing shall be deemed to be included in the quoted rate 10 Supply and fixing SMD LED panel recess/surface suspended mounting 40 watt 6500K 2x 2 (600x600mm) LED ceiling light with extruded aluminium housing and milky diffuser complete all as specified and directed. 11 Supply, install & testing heavy duty exhaust fan complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1400 RPM, Copper winding of sweep 300 mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan complete, all as specified and directed 12 Supply and fixing sub main wiring with 2 runs of 4 sqmm single core, multi-stranded PVC insulated, FRLS sheathed cable 1100 Volts grade with copper conductor drawn through and including non metalic PVC conduit, medium grade, not less than 25mm dia, ISI marked, with conduit fittings and accessories not less than 25mm dia concealed in wall/ceiling/floor including1 runs run of 4 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete, all as specified and directed.Note :- 2 runs of 4 sqmm copper cable and 1 runs run of 4 Sqmm copper cable alongwith non metallic PVC conduit/conduit accessories not less than 25mm dia will be measured as one unit length 13 Supply and Fixing BEE 5 star rated Storage water heater (Geyser) of 50 litre capacity 230V AC, 50HZas per IS -2082:1993 having 3 KW INCOLOY glass coated element with ABS shock proof and rust proof outer body,high density PUF insulation 35 mm , MS Tank with glasslined coatingfrom insidewhich can sustain pressure of minimum 8 Bar working pressure , class -I , vertical type with adjustable thermostate and thermal cutoutcapillary type , Magnesium anode 150 mm and dia 18mm ,Adjustable temperature control knob, FR garde electric cable with ISI mark plug top and having multifunction safety valve, making electric and water connection complete all as specified and directed by Enrg-in-Charge.Note :-(a) Cost of NRV, check valve end nuts, MS nipples & etc shall be deemed to be included in the quoted rate for smooth functioning of geysers.(b) Cost of nut/ bolts for grouting for shall also be deemed to be included in the quoted rate 14 Supply and fixing of PVC Connection (Hot) of size 15 mm x 600 mm complete, all as specified and directed. 15 Supply and fixing desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size) complete, all as specified and directed. 16 Supply and fixing Brass chromium plated fancy type bib tabs of size 15 mm diabore short body, screwed downfor CPVCpipe or for brass ferruleand fixed complete, all as specified and directed. 17 Supply and fixingof brass chormium plated angle valve, fancy typeof size 15mm dia screwed down for high pressure CPVC pipes, complete, all as specified and directed. 18 Supplying and fixing rotational moulded polythelene water storage tanks(Triple layer) capacity 500 litres(cylindrical vertical with closed top), with and including 20mm dia float valve with brass fittings hoisted, fixed in position and making connection including iron staging for tank complete, all as specified and directed. 19 Supply and fixing CPVC pipes SDR 11 and plain CPVC SDR 11 fittings 20 mm bore with all fitting and fixedto walls, ceiling and laid in floor complete all as specified Note- Quoted rate will include the cost of making water connection from existing supply line and making good of the wall surface etc complete, all as specified and directed. 20 Supply and fixing CPVC pipes SDR 11 and plain CPVC SDR 11 fittings 25 mm bore with all fitting and fixedto walls, ceiling and laid in floor complete all as specified Note- Quoted rate will include the cost of making water connection from existing supply line and making good of the wall surface etc complete, all as specified and directed. 21 Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 32 A complete, all as specified and directed. 22 Material and labour for sub main wiring with 1100 volt grade two single core PVC insulated and unsheathed cable with stranded copper conductor 4.0 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 2.5 sqmm multi - stranded copper conductor as earth wire in green colour complete, all as specified and directed. 23 Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. 24 Removal of excavated material not exc 500m andexceeding 250 m and depositing where directed at a level not exc 1.5m above the starting pointcomplete all as specified and directed. 25 Material and labour for 100mm thick PCC 1:4:8 type D-2(using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed. 26 Material and labour for machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments complete all as specified and directed. (Make: Mehtab tiles, sitco, surya Omega Duracrete, Eurocon) complete all as specified and directed. 27 Material and labour Sand filling under floors or in foundation including watering and consolidation complete, all as specified and directed. 28 Material and labour for brick work using sub class B brick, old size bricks,straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete, all as specified and directed. 29 Providing pre cast cement concrete set in cement mortar 1:4 ofType B1 1:2:4( 20mm graded aggregate) window or door cill,lintels, bresuuumners, steps qoins blocks ( for use with masonary ) string, courses, coping.kneelers apex stones, pies caps, cloumns, posts, boundary pillers, bed plates, pimtle blocks, bonders ( for stone wallin) corbels, brackets etc ( of any section indicated), with plain fair, faces including chamfers, whethering throat-ing etc and setting in mortar complete with joints to match etc complete, all as specified and directed. 30 Providing pre cast cement concrete set in cement mortar 1:4 ofType B1 1:2:4( 20mm graded aggregate) in ladings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain fair, etc and setting in mortar complete with joints to match etc complete all as specified and directed. 31 Mild steel TMT bars 6mm dia to 8mm dia and over cut to length bent to shape require,including cranking,bending spirally for hopping for columns,hook-ing ends and binding ith and including mild steel wire(annealed)not less than 0.9 mm dia or securing with clips quality conforming,complete, all as specified and directed. 32 Material and labour for 100mm bore of reinforced concrete pipes, class NP2, laid and jointer complete with collars complete all as specified and directed. 33 Material and labour for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface complete, all as specified and directed. 34 Supply and fixing hollow PVC wall lining consisting of plain colour PVC sheet inclusive of solvent cement, PVC frame and all necessary items for fixing at site, complete, all as specified and directed. 35 Supply and fixing for Anodised aluminium snap grid frame work of size of grid 600 x 600mm for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting levelall fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete, all as specified and directed. 36 Providing and fixing 10mm thick plaster of paris ceiling (Gypsumanhydrous) to flat surface over aluminium snap grid 600mmx600mm frame work or metal frame work complete, all as specified and directed. 37 Material and labour for 18/19mm thick prelaminated HDMR board, interior grade, with decorative choice lamination fixed with screws as in shelves/shutters complete, all as specified and directed. 38 Supply and fixing continuous (piano) hinges, width of flaps (when open) in 40mm mild steel bright finish or electrogalvanised complete, all as specified and directed. 39 Supply and fixing 100mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws. 40 Supply and fixing 75 to 80mm long brass handle complete all as specified.
