Providing And Fixing Modular Furniture To Taluka Lavel Administrative Building At Dharni Distt. Amravati , Providing And Fixing Modular Furniture To Taluka Laveladministrative Buildingatdharni Distt. Amravati , Steel Almirah916mm(W)X486mm(D)X1981mm(H) Providing, Supplying And Placing Of Storage Unit. Steel Almirah Storewel Plain As Per Order Steel Almirah Storewel Plain As Per Order Overall Size Of16mm(W)X486mm(D)X1981mm(Hwith Welded Construction. It Should Have The Shelf Thickness Of 0.8 Mm, Back Thickness Of 0.7Mm, Door Thickness Of 0.8Mm (High Yield Strengthand All Other Components Shall Have A Thickness Of 0.5Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength :513. It Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). Plenty Of Colour Options And Shelving Options Shall Be Available. , Public Seating Chairproviding, Supplying And Placing Of Three Seater Waiting Chair. It Should Bemade Up Of Black Powder Coated Rectangular M.S.Erw Tube Having 8.0 ± 0.03 Cm X 4.0 ± 0.03 Cm X 0.2 ± 0.014 Cm Size.It Should Be Powder Coated Made Of Cold Rolled Steel With 0.12 ± 0.013 Cm Thinkness.It Should Bepowder-Coated Perforated Shell Made From Cold Rolled M.S. Sheet 0.14+/-0.013Cm Thickness.The Side Bar Should Bemade Of Powder Coated Solid Steel 3.0+/-0.03Cm * 1.2+/-0.3Cm With Fluting And Plastic Inserts. The Shell Should Beassembled On The Cross Beam With Help Of M8 Bolts (Per Seat - 8 Nos. Seat To Bracket And 4Nos. Bracket To Cross Beam). Overall Dimensionsseat Height - 40.0Cm, Height - 67.5 Cm, Width & Depth Of Chair As- Width-163.0Cm And Depth-57.0 Cm. , Ppo Unitized T25+1 Table Providing, Supplying And Placing Of Ppo Unitized T25+1 Table Size Of Main Table Should Be 1500 Mm In Width, 600 Mm In Depth And 750 Mm In Height With End Return Unit Of 900 Mm Witdth, 450 Mm Depth And 750 Mm Height With Matching Corner Flawless Design. Main Worktop-Made Of 18Mm Thick Pre-Laminated Board (Plbof Highgrade And Approved Shade Confirming From Engineer, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Flap Provided On Work Surface For Wire Management. Return Worktop-Made Of 18Mm Thick Pre-Laminated Board (Plbof High Grade And Approved Shade Confirming From Engineer, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Modesty Panel-Made Of 18Mm Thick Pre-Laminated Twin Board (Pltof High Grade And Approved Shade Confirming From Engineer, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Legs-Cube Legs Are Fabricated From Ms Erw Tube Of 50 Mm X 50 Mm X 1.2Mm Thick And 50 Mm X 50 Mm X 1.2 Mm Thick . At The Top Surface Of Leg, Support Brackets Of 3 Mm Thick Hr Are Welded For Fixing Worktop. These Are Welded Togesther By Argo Shield Welding. This Welded Structure Is Coated With 50 Micron Epoxy Polyester Coating. At The Base, A Plastic Cap With M8 Molded Insert Is Fixed, Cross Members-Cross Members In Unitized T-2 Desk Series Are Made From 50Mm X 50Mm X 1.2Mm Thick Erw Tube . These Are Coated With 50 Micron Epoxy Polyester Coating.Cross Members Are Assembled By Friction Fit Pdc Joinery And Grub Screws. There Are Always Two Cross Members For One Table. Access Flap-Soft Closing Access Flap Is Used In Unitized T-2 Desk Series. Provision For Standard Size Of 8 Module Electrical (Anchor Romais Offered. Access Flap Is Made From Aluminum Extrusion, Pdc Parts Made From Aluminum Alloy And Plastic Parts Are Made From Nylon 6 And Wire Brush With Nylon Bristles. , Table @ 1800Lx 900Dx740ht.Providing, Supplying And Placing Of Main Table Finness 6030 Table Tablesize Shall Be 1800 Width Mm X 900 Depth Mm X 740 Height Mm .Table Top Shall Be 25 Mm Thick Plain Particle Board .Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading.The Modesty Shall Be 18 Mm Thick Plain Particle Boardppb Clad With Both Sides. Edge Sealed With 2 Mm Thick Pvc Beading. , High Back Chairfor N.T. Providing, Supplying And Placing Of High Back Chair Ppo Unitized T25+1 Table Seat/Back Assembly: The Back Is Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood & Seat Is Made Up Of 1.5 ±0.1Cm. Thick Hot-Pressed Plywood Measured And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Foam Lumbar Support. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area.The Recron Filling Done In Seat & Back Executive Chairs Onlyfor Extra Fluffiness And Comfort In Chair.The Chair Seat & Back Size Are High Back Size 51.5 Cm. (Wx 82.0 Cm. (H) Seat Size 53.5 Cm. (Wx 51.0 Cm. (D) High Resilience (Hrpolyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45±2 Kg/M3 And Hardness Load 14 ± 2 Kgffor 25% Compression. Armrests (Thrill Plus Chair: The Adjustable Armrest Is Designed With The Following Features · Up-Downdjustment– 6 Steps (7.2 ± 0.5Cm Range) · Armrest Top Is Mounted On Armrest Structure Made Of Glass Filled Nylon. · Armrest Top Is Pu Moulded Over Glass Filled Nylon Insert. Center Tilt Synchro Mechanism With Multi Lock : The Mechanism Is Designed With The Following Features: ·360° Revolving Type. ·Any Position Locking With Anti Shock Mechanism. ·Tilt Tension Adjustment Pneumatic Height Adjustment : The Pneumatic Height Adjustment Has An Adjustment Stroke Of 9.5 ± 0.3 Cm Pedestal Assembly Thrill Plus: The Pedestal Is Injection Moulded In Black Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.1 ±0.5Cm. Pitch-Center Dia. (76.1 ±1.0Cm With Castors). Twin Wheel Castors : The Twin Wheel Castors Are Injection Moulded In Black Nylon. Width (W): 76.1 Cm. Depth (D): 76.1 Cm. Height (H): 113.5-123.5 Cm. Seat Height (Sh): 46.0-56.0 Cm. , Ppo Aristo Table2350x2350x750 Mm Providing, Supplying And Placing Of Main Table, Eru & Pedestal. Ppo Aristo Table Aristo Tbl 2350 Rh Ru 1200 Pdl 2350X2350x750 Mm Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming From Engineer Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25 Mm Thick Pre-Laminate Board . Modesty Panel Made Of 18Mm Thick Pre-Laminate Board Confirming From Engineer. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board And Approved Shade Confirming From Engineer, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 18Mm Thick Pre-Laminated Twin Boardconfirming , Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Pre-Laminate Board Confirming Pedestal Construction Is Box-Box-File Type Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. , Mid Back Chair For Staff.Providing, Supplying And Placing Of Briyo Mid Back Chair Seat/Back Assembly: The Seat And Back Are Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured.Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area.Mid Back Size 47.5 Cm. (Wx 58.0 Cm. (H).Seat Size 47.0 Cm. (Wx 48.0 Cm. (D) High Resilience (Hrpolyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45±2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrests: The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene.Center Tilt Synchro Mechanism : The Mechanism Is Designed With The Following Features: ·360° Revolving Type. · Upight Position Locking · Tilt Tension Adjustmen. ·Seat/Back Tilting Ratio Of1:3. Tubular Frame : The Powder Coated Dft 40-60 Microns Tubular Frame Is Cantilever Type & Made Of Ø 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. Pneumatic Height Adjustment : The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm. Telescopic Bellow Assembly : The Bellow Is 3-Piece Telescopic Type And Injection Moulded In Black Polypropylene. , Slotted Angle Racksupply And Installation Of Slotted Angle Rack Slotted Angle- Slotted Angle Is Made Up 1.2Mm Thick Crca Sheet Confirming The Is Gradecoated With Final Finish Consisting Of Epoxy Polyester Powder Coat Of Approved Color & Shade With A Dry Film Thickness Of Minimum 50 To 60 Microns. Angle Length Is Equivalent To The Height Of The Storage Which Is Approx. 2100Mm Or 1830Mm Shelf-Is Made Up Of 0.6Mm Crca Sheet Confirming . All The Four Edge Is Having A Bend Of 25Mm. Shelf Is Supported By T-Hat In The Middle Portion. T-Hat Is Made Up Of 0.6Mm Crca Sheet Confirming Each Shelf Is Having Loading Carrying Capacity Of 14Kg Udl And Total Load Carrying Capacity Of Unit Is 30Kg Udl. Finish- The Bodies Including Shelves Are Given Anti-Rust Surface Treatment & Are Powder Coated With Epoxy Polyester Powder. It Involves An Oxsilan Pre-Treatment Consisting Of Hot Water Degreasing, Cold Water Rinse I & Cold Water Rinse Ii, Iron Phosphate, Cold Water Rinse, And Passivation & Dry Off Oven Treatment. Final Finish Consists Of Epoxy Polyester Powder Coating Of Approved Color & Shade With A Dry Film Thickness Of 50 To 60 (+- 5Microns. The Material Is Then Oven Baked With A Controlled Temperature Of 180 Deg.C To 200 Deg.C. Fasteners:- Assembly Is Done With The Help Of M8 Nut Nuts & Hex Bolt M8 X 16. , Mid Back Chair For Auditorium Diasproviding, Supplying And Placing Ofconference Mid Back Chair Legacy Ppo Conference Chair Seat/Back Assembly: The Seat Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot Pressed Plywood And Upholstered With Fabric Or Synthetic Leather And Moulded Polyurethane Foam. The Back Should Bemade Up 1.2 ±0.1Cm. Thick Hot Pressed Plywood Upholstered With Replaceable Fabric Or Synthetic Leather Upholstery Covers And Moulded Polyurethane Foam. The Back Ply And Foam Should Bedesigned With Contoured Lumber Support For Comfortable Seating Posture. Back Size:48Cm.(Wx 64.5Cm.(H) Seat Size:51.0Cm.(Wx 48.0Cm.(D) High Resilience (Hrpolyurethane Foam: The Hr Polyurethane Foam For Seat And Back Should Bemoulded With Density = 45 +/-2 Kg/M³ And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrests:The Armrest Top Should Bemade Of Moulded Polyurethane (P.Uand Mounted On To A Fixed Type Tubular Armrest Support Which Should Bechrome Plated Finish. Front Pivot Synchro Mechanism: The Mechanism Should Bedesigned With The Following Features: •360° Revolving Type Single Point Control. •Front Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort. •Tilt Tension Adjustment. •Any Position Locking With Anti-Shock Feature. •Seat Back Tilting Ratio Of 1:2. Fixed Backrest :The Backrest Consshould Be Ts Of A Fixed Type Mechanism I.E. No Back Up/Down Adjustment. Pneumatic Height Adjustment :The Pneumatic Height Adjustment Has An Adjustment Of 10.0 ±0.3Cm. Pedestal Assembly:The Pedestal Should Befabricated From 0.2 ± 0.02 Cm Thick Hr Sheet, Chrome Plated And Assembled With Injection Moulded Black Polypropylene Hub Cap And 5 Nos. Twin Wheel Castors.The Pedestal Should Be66.0 ±0.5Cm. Pitch-Center Dia. (76.0 ±1.0Cm. With Castors). Twin Wheel Castors: The Twin Wheel Castors Should Beinjection Moulded In Black Nylon. Overall Dimensions Of Chair Seat Height - Min 47.2 To Max 57.2Cm. Height - Min 96.5 To Max 106.5 Cm. Width & Depth Of Chair As Measured From Pedestal - Width-76.0 Cm And Depth-76.0 Cm. , Video Conference Tableproviding, Supplying And Placing Of Conference Table Mingle Conference Table 22Seater Worksurface : Made Of 25Mm Thick Pre-Laminated And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Understructure : It Consist Of 18Mm Thick Pre-Laminated Twin Board Ofgrade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Aluminium Alloy 63400 - Wp Profile Is Used For Connecting Panels Together. The Product Plastic Abs Access Flap Is Provided For Easy Access To Wires And Cables. Work Top Is Available In Various Shapes As Shown Above. Modesty Panel : Made Of 18Mm Thick Pre-Laminated Twin Board Grade And Approved Shade Conformingedge Banded With Matching 2 Mm Thick Pvc Lipping. Powder Coated Accent Metal Strip Provided Below Work Surface To Enhance Aesthetics. It Is Made Of 0.8Mm Crca513,Epoxy Polyester Powder Coated (Dft 40-60 Microns) Wire Management : An Array Of Panels Made Of 0.8Mm Crca Ms Is:513, Epoxy Polyester Powder Coated (Dft 40-60 Micronsis Used For Flow Of Wires And Cables. Provision To Mount Anchor Roma 6 Module Plate Is Provided Below Worktop. Cutout On Top With Two Piece Injection Moulded Plastic Part Polymer Component Is Fitted To Pull Out Audio,Video Cables Onto Worktop And Connect Devices Charger To Power Socket Below Worktop. , Medium Height Partition @ 1800/1200Ht Tile Based Partition System Tile Based Aluminum Partition System Of 1800/1200 Mmht. Made Of 60 Mm Thick Aluminum Frames Having Two Separate Race Ways For Laying Electrical & Computer Wiring.The Wire Management Shall Be Through To The Race Way Tobe Fitted At Bottom Of Partition Other Immediatelybelowofworktopwithhookontyperacewaycoverforeasyaccessofwires.Framestobejoinedbyaluminumconnectorswithm6x16pan-Headmachinescrewandwasherwithaluminumpostcover.Postcoversnaponfashiontobeconnectedonaluminumconnectorvisiblealuminiumtobeinanodized/Powdercoatedfinish.Thetopexposedsidesoftheframeandpostsshouldbecoveredwithhorizontal/Verticaltrimandcapsmadeofaluminuminanodized/Powdercoatedfinishinordertoenhanceitslook.Uppertilesonthepartitiontobeinsoftboardormarkerorprelaminatedparticalboardtileof9mm.Thk.,Prelaminatedparticalboardlowertilesinlaminatefinish9mm.Thk. On Both The Sides .Size :- 1200/1800Mm (H) , Full Height Partitions In Solidf Inish-Providingandfixing80mmto85mmthickfullheightdoubleskinpartitionupto3mtrheightwithallvisiblesectionsinanodized/Powdercoatedfinish.Madeupofframesandtiles.Frameconstructionincombinatonofaluminiumrailsandbottom,Centerandtopmembers,Connectedwith2wayroundshapepost,3Waypost,4Waypostmadeupofaluminiumextrudedandtilesin9mmthk.Prelaminatedparticalboardofonbothside.Withallthejointsinthepartitionscoveredwithpvcextrusionstoprovidebettersoundproofing.Tilestobeseparated55mmfromeachothertoprovideadequatespacefordrawingcablesforelectric,Dataandtelephonewithproperfacilityforfixingelectricalanddataswitchplates.Asperdesignanddrawing. , Fullheightpartitionsinglassfinish-Providingandfixing80mmto85mmthickfullheightdoubleskinpartitionupto3mtrheightwithallvisiblesectionsinanodized/Powdercoatedfinish.Madeupofframesandtiles.Frameconstructionincombinatonofaluminiumrailsandbottom,Centerandtopmembers,Connectedwith2wayroundshapepost,3Waypost,4Waypostmadeupofaluminiumextrudedandtilesin5mmthk.Nontoughenedglassonbothside.Withallthejointsinthepartitionscoveredwithpvcextrusionstoprovidebettersoundproofing.Tilestobeseparated55mmfromeachothertoprovideadequatespacefordrawingcablesforelectric,Dataandtelephonewithproper Facility For Fixing Electrical And Data Switch Plates. As Per Design And Drawing. , Sofa Set 3+1+1 Providing&Fixingsofaset3+1+1Brownandcreamleatherdimensionlength:182.5(Cms)Breadth(Cms):100(Cms)Height(Cms):100(Cms)Weight(Kilograms):66(Kilogram) Seating Capacity: Five Seat , Vertical Blindsproviding And Fixing Vertical Blinds Of Approvedand Shade Of 100Mm Regular Fabric With Powder Coated Aluminium Channel With Telting Pvc Chain & Bottom Weight Plate With All Necessary Fixtures And Fitting Etc. Complete. (Sample To Be Final By Engineer In-Charge Prior Execution Of Work) , Providing And Fixing 20 Mm Thick Superior Veneer Board Pelmet Box 150To200mm Wide Todoorsorwindowframesincluding20mmdia.Aluminiumcurtainrodwithsockets And Finishing With French Polishing (Without Top)Etc. Complete. , Visitor Chair,Sdo And Tahsildar Cabinsproviding, Supplying And Placing Of Visitor Chair Briyoo Visitor Chair As Per Order Seat/Back Assembly: The Seat And Back Are Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressedplywood Measured Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contouredlumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort Topopliteal Area. Mid Back Size 47.5 Cm. (Wx 58.0 Cm. (H). Seat Size 47.0 Cm. (Wx 48.0 Cm. (D) High Resilience (Hrpolyurethane Foam: The Hr Polyurethane Foam Is Moulded Withdensity = 45±2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrests :The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene. Tubular Frame : The Powder Coated Dft 40-60 Microns Tubular Frame Iscantilever Type & Made Of Ø 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. Overall Dimensions Of Chair Width (W): 61.4 Cm. Depth (D): 64.5 Cm. Height (H): 89.5 Cm. Seat Height (Sh): 46.5 Cm.
