}

Tender For Lighting Work In Various Nazul Parks Under Lucknow Development Authority (Dr.) Ram Manohar Lohia Park, Raja Ram Pal Park, Suraj Kund Park And Lemon Park) - Supply & Fixing Of 9 Mtr Gi Octagonal Pole Of Approved Make (Top Dia 70Mm, Bottom Dia 15, lucknow-Uttar Pradesh

Lucknow Development Authority has published Tender For Lighting Work In Various Nazul Parks Under Lucknow Development Authority (Dr.) Ram Manohar Lohia Park, Raja Ram Pal Park, Suraj Kund Park And Lemon Park) - Supply & Fixing Of 9 Mtr Gi Octagonal Pole Of Approved Make (Top Dia 70Mm, Bottom Dia 15. Submission Date for this Tender is 17-03-2025. Decoration Work Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

48154122
Tender For Lighting Work In Various Nazul Parks Under Lucknow Development Authority (Dr.) Ram Manohar Lohia Park, Raja Ram Pal Park, Suraj Kund Park And Lemon Park) - Supply & Fixing Of 9 Mtr Gi Octagonal Pole Of Approved Make (Top Dia 70Mm, Bottom Dia 15
Open Tender
Indian
Uttar Pradesh
Lucknow
17-03-2025

Tender Details

Tender For Lighting Work In Various Nazul Parks Under Lucknow Development Authority (Dr.) Ram Manohar Lohia Park, Raja Ram Pal Park, Suraj Kund Park And Lemon Park) - Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. As per PWD schedule 2018 SI No 645 2 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. As per PWD schedule 2018 SI No. 1454 CAT AAA 3 Supply and fixing of M/S Bracket 9 circular/square shape for fixing of four number LED flood light on Top of pole complete of work with labour T&P etc 9PSR) 4 Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in charge complete in all respect. As per PWD schedule 2018 SI No. 703 5 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc As per PWD schedule 2018 SI No. 501 6 10 sqmm 4 core 7 35 sq. mm 3-1/2 core 8 Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, nstrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer in Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only As per PWD Schedule 2018 SI No. 801 (b)Incoming 100 AMP TPN-1 Nos32 Amp TPN-3 Nos. 9 Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light onsurface complete in all respect. As Per PWD schedule 2018 SI No. 1413(A) Cat AAA 10 Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earth continuity wire, GP Box, piano type switch and ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed. As per PWD Schedule 2018 SI No. 121(B) 11 Supply and fixing of 1200 mm ceiling fan complete in all respect as per direction of E/Ic (PSR)

Key Value

Document Fees
INR 767 /-
EMD
INR 40500.0 /-
Tender Value
INR 8.09 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail