Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-03-2025 | Corrigendum-II | Date | 07-04-2025 |
| 2 | 22-03-2025 | Addendum and Corrigendum-I | Technical Bid | 27-03-2025 |
| Sl. No. | Item Description |
| 1 | Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). |
| 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 3 | Depth of excavation not exceeding 1,500 mm. |
| 4 | Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. |
| 5 | Depth of excavation for additional depth beyond 3000 mm. upto 4000mm. excluding cost of shoring as necessary. |
| 6 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)With earth obtained by fresh excavation (including cost of excavation upto 1,800 mm. depth) from land arranged by the Deptt. within a lead of 100 m. |
| 7 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)by fine sand |
| 8 | Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%. |
| 9 | Anti-termite treatment to the outside of foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight, drilling 12mm. dia holes in concrete or masonry apron at an interval of 300mm. to a depth,of 300mm or more as close to the plinth wall as possible and the chemical emulsion pumped into those holes to soak the soil below at a rate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981. |
| 10 | Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para 4.3.1.4 of code I.S.-6313 (Part-III)- 1981. |
| 11 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur Variety |
| 12 | Ordinary Cement concrete (mix 1:1.5:3)with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety |
| 13 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) -Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work |
| 14 | 25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency] |
| 15 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 16 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3coarsesand:6gradedstoneaggregate20mm nominalsize)over75mmthickbedofdrybrickballast40mm nominal size, well rammed and consolidated and grouted with finesand, including finishing the top smooth. |
| 17 | Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work, compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier] Without approved concrete pump.Supply of concrete pump including all tools, machine, operator and fitting fixing complete. |
| 18 | All works upto plinth level |
| 19 | All works above plinth level upto 1st floor |
| 20 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works.25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge. |
| 21 | Provide Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 mTor steel/Mild steel. JSW/JSPL/SHYAM/ SRMB/BMASL /ELECROSTEEL /SSL |
| 22 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 23 | Brick work with 1st class bricks in cement mortar (1:6) In foundation & plinth |
| 24 | In superstructures, ground floor. |
| 25 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 26 | Extra forprovidingand placing in position 2 Nos. 6 mm dia. M.S. barsateverythirdcourseofhalfbrickmasonry(withF.P.S. bricks). |
| 27 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. [White cement and Pigment to be supplied by the Agency]Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding 0.6 sq.m.With Makrana plain pink / Adranga Pink / Garbh Gulabi/ Udaypur pink / Udaypur Green / Black Bhaslana |
| 28 | Extra cost of labour for prefinished and premoulded Nosing totreads of steps, railing, window sill etc. of Marble Stone. |
| 29 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps.Sal: Local |
| 30 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:35mm thick shutters (single leaf) |
| 31 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:150mm long x 10mm dia. Bolt |
| 32 | Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete.(ii) 175mm plate x 12mm dia rod x 60mm hexagonal / fluted. |
| 33 | Providing and fixing bright finishing brass door latch with necessary screw etc, complete.250x16x5 mm |
| 34 | M.S. structural works in columns, beams etc. with simple rolledstructural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initial 8m. or part thereof.For built up sections / srtuctural members of specified sectionsweighing not less than 22.5 Kg./m |
| 35 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in ground floor (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. (Add extra @ 1% for each addl. floor upto 4th floor and @1.25% for each addl. floor above 4th floor) |
| 36 | Providing and fixingIst quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer),ofapprovedmake,inallcolours,shadesexcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mmthickbedofcementmortar1:3(1cement:3coarsesand) andjointingwithgrey cementslurry @3.3kgpersqm,including pointinginwhitecementmixedwithpigmentofmatchingshade complete.(Tilesof sizeshallbeused 300x450mmof Somany/Johnson/Kajaria) |
| 37 | ProvidingandlayingMatt/AntiskidfinishVitrifiedtilesinfloorin different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will bedonewiththenotchtrowel,plier,wedge,clipsofrequired thickness,levelingsystemandrubbermalletforplacingthe tiles gently and easily. |
| 38 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorptionlessthan0.08%andconformingtoIS:15622,of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles most be cut with the zero chipping diamond cutter only. Laying of tiles will bedonewiththenotchtrowel,plier,wedge,clipsofrequired thickness,levelingsystemandrubbermalletforplacingthe tiles gently and easily.Glazed vitrified floor tiles polished finish of size |
| 39 | Size of Tile 600 x 600 mm |
| 40 | Size of Tile 600 x 1200 mm |
| 41 | Providingandlayingfullbodyvitrifiedtileinfloorofminimum thickness15mmwithwaterabsorptionlessthan0.06%and conformingtoIS:15622,ofapprovedmakebrandand manufacturer,laidon20mmthickbasecementmortar1:4(1 cement:4coarsesand)[email protected] kg/sqmincludinggroutingthejointswithwhitecementand matchingpigmentsetc.Theslabmustbecutwiththezero chipping diamond cutting only. Laying of slab will be done with the help ofnotch trowel,wedge, clip ofrequiredthickness,vaccume cupsoflifting,levelingsystemandrubbermalletforplacingthe slab gently andeasily.Sizeoftile800x 2400mmofall colours and shades, |
| 42 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:110 mm. Dia. |
| 43 | Providingandfixingonwallfaceunplasticised-PVCmoulded fittings/accessories forunplasticised Rigid PVC rain waterpipes conformingtoIS: 13592 TypeA includingjointing withseal ringconforming to IS:5382leaving10mmgapforthermalexpansion. |
| 44 | Coupler 110 mm |
| 45 | Single tee withoutdoor110x110x110 mm |
| 46 | Bend 87.5° 110 mm |
| 47 | Shoe(plain) 110 mm |
| 48 | Providingandfixingunplasticised-PVCpipeclipsofapproved designtounplasticised-PVCrainwaterpipesbymeansof 50x50x50mmhardwoodplugs,screwedwithM.S.screwsof required length, includingcuttingbrick workand fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm |
| 49 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortarincluding rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excludingcost of chipping over concrete surface] |
| 50 | With 1:6 cement mortar15 mm thick plaster |
| 51 | With 1:3 cement mortar10 mm thick plaster |
| 52 | Extraforplasteringdoneonmoulding,cornicesorarchitraves including neat finish to line and level : |
| 53 | In one coat |
| 54 | In two coats |
| 55 | Applyingone coatofwaterthinnable cement primerofapproved brand and manufacture on wall surface :Water thinnable cement primer |
| 56 | Wallpaintingwithacrylicemulsionpaintofapprovedbrandand manufacture to give an even shade :Two or more coats on new work |
| 57 | Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 Sqm). |
| 58 | FinishingwallswithPremiumAcrylicSmoothexteriorpaintwith Silicone additives of required shade at all height:Newwork([email protected]/10sqmover [email protected]/10 sqm) |
| 59 | Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc.(This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) |
| 60 | Provide and paint with best quality synthetic enamale paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.Two coats (with any shade except white on steel surface.Withhi-gloss of approved quality |
| 61 | Providingandlayingatorneargroundlevelfactorymadekerb stoneofM-25gradecementconcrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement:3coarsesand),includingmakingjointswithorwithout grooves(thicknessofjointsexceptatsharpcurveshallnotto morethan5mm),includingmakingdrainageopeningwherever requiredcompleteetc.asperdirectionofEngineerin-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 62 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 63 | Providing and laying factory made chamfered edge Cement Concretegrasspaverblocksinfootpath,parks,lawns,drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over50 mmthick compacted bed of sand,compactingandproperembedding/layingofinterlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction ofEngineer-in-Charge. |
| 64 | 80 mm thick C.C. paver block of M-35 grade with approved colourdesign and pattern. |
| 65 | Providing and laying factory made chamfered edge Cement Concretepaverblocksinfootpath,parks,lawns,drivewaysor lighttrafficparkingetc,ofrequiredstrength,thickness&size/ shape,madebytablevibratorymethodusingPUmould,laidin requiredcolour&patternover50mmthickcompactedbedof sand,compactingandproperembedding/layingofinterlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approved colourdesign and pattern. |
| 66 | Providingandplacinginposition100mmthickfactorymade machinebatched&machinemixedPrecastRCCRectangular Coversondrainsoffootpathofvarioussizes,ofM-25grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads&lift,handlingatsiteetc.allcompleteasperdirectionof Engineer-in-Charge. |
| 67 | Providing andfixingaluminiumworkfordoors,windows, ventilatorsandpartitionswithextrudedbuiltupstandardtubular sections/appropriateZsectionsandothersectionsofapproved make conformingtoIS:733andIS:1285,fixingwithdash fastenersofrequireddiaandsize,includingnecessaryfillingup thegapsatjunctions,i.e. attop,bottomand sideswith required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading forglazing/paneling,C.P.brass/stainlesssteelscrews,all completeasperarchitecturaldrawingsandthedirectionsof Engineer-in-charge.(Glazing,panelinganddashfastenerstobe paid for separately) : Anodisedaluminium(anodisedtransparentordyedtorequired shadeaccordingtoIS:1868,Minimumanodiccoatingofgrade AC 15). |
| 68 | Forshuttersofdoors,windows&ventilatorsincludingproviding and fixing hinges/ pivots and making provision for fixing of fittings whereverrequiredincludingthe ofEPDMrubber/neoprene gasket required (Fittingscost shall be paid for separately). |
| 69 | Providingandfixingwhitevitreouschinapedestaltypewater closet(EuropeantypeW.C.pan)withseatandlid,10litrelow level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. |
| 70 | ProvidingandfixingwashbasinwithC.I.brackets,15mmC.P. brasspillartaps,32mmC.P.brasswasteofstandardpattern, includingpaintingoffittingsandbrackets,cuttingandmakinggood the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar. |
| 71 | Providing and fixing mirror of superior glass (of approved quality) andofrequiredshapeandsizewithplasticmouldedframeof approved make and shade with 6 mm thick hard board backing:Rectangular shape 453x357 mm |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermalstabilityforhot&coldwatersupply,includingall CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 73 | 15 mm dia nominal bore |
| 74 | 32 mm dia. nominal bore |
| 75 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 76 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 77 | Providingandfixinggunmetalnon-returnvalveofapproved quality (screwed end) : |
| 78 | 25 mm nominal boreHorizontal |
| 79 | 25 mm nominal boreVertical |
| 80 | 32 mm nominal bore Horizontal |
| 81 | 32 mm nominal boreVertical |
| 82 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :15 mm nominal bore |
| 83 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, withC.I.surfacebox100mmtopdiameter,160mmbottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab1:1.5:3mix(1cement:1.5coarsesand:3gradedstone aggregate 20 mm nominal size), including necessary excavation, foundationconcrete1:5:10(1cement:5finesand:10graded stoneaggregate40mmnominalsize)andinsideplasteringwith cementmortar1:3(1cement:3coarsesand)12mmthick, finishedwithafloatingcoatofneatcementcompleteasper standard design :WithcommonburntclayF.P.S.(nonmodular)bricksofclass designation 7.5 |
| 84 | ProvidingandfixingC.P.brassbibcockofapprovedquality conforming to IS:8931 : 15 mm nominal bore. |
| 85 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. cement :300 mm dia. R.C.C. pipe |
| 86 | Diggingholesinordinarysoilandrefillingthesamewiththe excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% :1partofstackedvolumeofmanureafterreductionby8%) floodingwithwater,dressingincludingremovalofrubbishand surplusearth,ifany,withallleadsandlifts(costofmanure, sludge or extra good earth if needed to be paid for separately) : Holes 60 cm dia, and 60 cm deep |
| 87 | Supplying and stacking of good earth at site including royalty and carriage up to 5 km (earth measured in stacks will be reduced by 20% for payment). |
| 88 | Uprootingrankvegetationandweedsbydiggingtheareatoa depth of60 cm,removing allweeds andothergrowthwith roots byforkingrepeatedly,breakingclods,roughdressing,flooding with water, uprooting fresh growths after 10 to 15 days and then finedressingforplantingnewgrass,includingdisposalofallrubbish with all leads and lifts. |
| 89 | Supplying andstackingatsitedumpmanurefromapproved source,includingcarriageupto5kmleadcomplete(manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 16 mm |
| 90 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness ofexistingground prepared with properlevel andrammingwithtoolswooden(Dhurmos)andthanrollingthe surfacewithlightrollermakethesurfacesmoothenandlight waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 91 | SupplyofPalms-welldeveloped,welldeveloped,diseasefree (Poly bag size - 18\"x 18\") Palms shall have heights as either 2.5m 3.0m.Forsinglestemmedpalms,the cleartrunkheightshall be atleast 80% of specified height, and stem girth shall be of dimensionnormallyfoundforpalmsforthestemheightand speciesspecified.Acceptabletolerancestovariationsinstem heightshallbe+200mmor-200mmfromtheheightspecified in the Bills of Quantities. The heads of palms shall be well balanced with at least 7 leaves and a healthy growing apical shoot all free frompestanddisease.Rootballdimensionsshallbe450mm diameter x 450mm depth. Supply shall include labour & equipment cost of loading, unloading, transport to site, storage & stackingwithinsiteinareaprotectedfromdustusingtemporary agronet, watering & maintenance at stacking area until planted as directed by EIC Botanical Name (CODE) [Height metres] Roystonea regia. |
| 92 | Dracaena (Mahatma) of height 30 cm to 90 cm inearthen pots of size 20 cm. |
| 93 | Providing and stackingofFicus panda ofheight45-60 cm.with 6-7 branchesand healthy foliage in p.bag ofsize 25 cmasper direction of the EIC. |
| 94 | Bougainvillea (mix variety) of height 30cm-90cm inpolybag of size 10cm-15cm. |
| 95 | Dracaena (Song of India) of height 30 cm to 90 cm in earthen pots of size 20 cm. |
| 96 | Supply & fixing in ground with pcc 1:4:8 metallic information sign boardmadeof3mmthickACPsheet,finishedwithapproved metallic colour as back ground (colour approved by department) & fixed on M.S. structure. The all side fabricated with 20mmx 3mm square bar with required fixing arrangement as frame(size:900x1200) |
| 97 | Supply & fixing Cast Iron Bench made up of 13 MS square tubes (50 mm X 25 mm) in length of 1500 mm size Decorative Stand / Legs |
| 98 | Supply & fixing FRP baluster with MS structure as per design with all complete. |
| 99 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.In ground floor including roof.upto 150 mm. thick |
| 100 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. |
| 101 | Wiring for light point/ fan point/ exhaust fan point with 1.5 Sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc as required. (Recessed below true ceiling and surface on true ceiling). (2 × 1.5 Sq.mm for P&N + 1.5 Sq.mm as ECC).Make: Conduit:precision/NorepackWire:KEI/Finolex/Havells/GlosterSwitch & socket: LK(FORMERLY L&T)/Legrand(Myirus)/schneider-Zenclo/Panasonic(vision)/ABB |
| 102 | Supplying and fixing two module step type electronic fan regulator on the existing modular plate switch box including connections etc. as required.Fan regulator: LK(FORMERLY L&T)/Legrand(Myirus)/schneider-Zenclo/Panasonic(vision)/ABB |
| 103 | Supplying and fixing suitable size GI box with modular plate and cover in front in recess (flushed in wall with mending good), including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connections etc. as required.Make:- LK(FORMERLY L&T)/Legrand(Myirus)/schneider-Zenclo/Panasonic(vision)/ABB |
| 104 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.Make-KEI/Finolex/Havells/Gloster |
| 105 | 2X2.5 + 1X2.5 sqmm FRLS Cu wire(for Light plug circuit wiring) |
| 106 | 2X4 + 1X4 sqmm FRLS Cu wire(for power plug & SPN DB submain) |
| 107 | Supply, Installation, Testing and Commissioningofsurface Mounted Led battern with integral driver with the following technical specifications:- Color temp - 6500K, minimum 40000 burning hrs life @ L70, System lumen output = 1920 Lm, System lumen efficacy > 120 lm/W , LED driver with PF 0.95 & THD < 20%, The colour rendering index of LED light should be more than 70. LM 80 Report with TM21 projection for LED Chip to be submitted .LM79 Report from NABL approved lab is required to be submitted. BIS Certificate of Luminaire to be submitted.Make-Philips (Signify)/LT/Wipro/KLITE/HAVELLS |
| 108 | Supply, Installation, Testing and Commissioningof SurfaceMounted Led Down Lighter with integral driver with the following technical specifications:- Color Temp- 6500 K, minimum 30000 burning hrs life @ L70, System lumen output = 1210 Lm,System lumen efficacy > 110 lm/W. LED driver with PF 0.9 & THD < 20%. The colour rendering index of LED light should be more than 70. LM 80 Report with TM21 projection for LED Chip is to be submitted .LM79 Report from NABL approved lab is required to be submitted. BIS Certificate of Luminaire to be submitted. Make-Philips (Signify)/LT/Wipro/KLITE/HAVELLS |
| 109 | Supply, Installation, Testing and Commissioning ofwall Mounted Mirror light comprising of LED with integral driver, 6500K/4000K/3000K color temp having minimum 20000 burning hrs life @ L 70, System lumen output =1000 Lm , System Lumen efficacy > 100 lm/W. LED driverPF 0.9 & THD < 20%. The colour rendering index of LED light should be more than 70. LM 80 Report with TM21 projection for LED Chip is to be submitted .LM79 Report from NABL approved lab is required to be submitted. BIS Certificate of Luminaire to be submitted.Make-Philips (Signify)/LT/Wipro/KLITE/HAVELLS |
| 110 | Supply, Installation, Testing and Commissioningof Track mounted Track Lighting comprising of LED withintegral driver, 3000K color temp, having minimum 40000 burning hrs life @ L70B50, System lumen output = 2000 lm,System lumen efficacy > 95 lm/W. LED driverPF 0.9 & THD < 20%. The colour rendering index of LED light should be more than 70. LM 80 Report with TM21 projection for LED Chip is to be submitted .LM79 Report from NABL approved lab is required to be submitted. BIS Certificate of Luminaire to be submitted.Make-Philips (Signify)/LT/Wipro/KLITE/HAVELLS |
| 111 | Supply, Installation, Testing and Commissioning of Pendant Light LED 7w-10w , Color Copper Finish, integral driver, 6500K/3000K/4000K color temp. The colour rendering index of LED light should be more than 70. BIS Certificate of Luminaire to be submitted.Make-JAQUAR/Philips/Havells/Wipro/KLITE. |
| 112 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B,3 nos. blades, 30 cm long down rod,2 nos.canopies, shackle kit, safetyrope, copperwinding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00,Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 megaohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.(Make : Crompton/ Orient/ Havells/Bajaj/Khaitan).1200 mm sweep |
| 113 | Supplying, installation, testing and commissioning of Exhaust fan / Fresh air fan with louvre . This is inclusive of fixing of exhaust fan after making a hole in the wall and making good damages and smooth cement finish etc. as required and providing necy. Length of PVC insulated copper wire for making the connection for Exhaust fan / Fresh air fan. (Make -Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells) 250 mm sweep fibre/sturdy engineering plastic body fresh air fanMake-Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells |
| 114 | Enclosure Box with MCBSupplying and fixing 25A MCB with IP65/66 Enclosure, 240 V, on surface/ recess, complete with din bar, interconnections, body metal with powder painted/PS (Polystyrene)/Polycarbonate/SMC including earthing etc. as required.Make-Legrand/ABB/LT/Schnider/Sintex/Hensel |
| 115 | Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.Make: Conduit:precision/Norepack20 mm |
| 116 | Post Top Lamp for Area Lighting |
| 117 | Supply, Installation& Commissioning of LED Post Top Latern with the following technical specifications:-Housing material: Pressure die cast aluminum with diffuser, IP66, IK08, Mounting device Pole Mounting,Luminous Flux 5,000 lm , Correlated Color Temperature 5700 K/3000K, Color rendering index (CRI) ≥70, Luminous Efficacy (rated) (Nom) 110 lm/W, Surge Protection (Common/Differential) Surge protection level until 4 kV, Median useful life L70B50 50,000 hour(s), System Wattage :45 watt to 60 Watt , Mounting: Pole mounting. LM 80 Report with TM21 projection for LED Chip is to be submitted .LM79 Report from NABL approved lab is required to be submitted. BIS Certificate of Luminaire to be submitted. Supply, Installation& Commissioning of 4 meter high pole for mounting the LED post top luminaire, aluminum, Pole color RAL color. This is inclusive of all internal wiring and connection required inside the pole. MAKE: Havells/LT/ Wipro/Philips/Crompton/Klite). |
| 118 | Construction of the suitable RCC civil foundation (M20) for the above pole. The foundation should be exposed above ground level.The design of the foundation should be as per site conditions. 02 nos flexible PVC Pipe of suitable diameter to be kept inserted inside the RCC foundation for cable entry. |
| 119 | Supply, Installation & Commissioning of LED Bollard with following technical specifications:- Luminous Flux 200 lm, Correlated Color Temperature (Nom) 4000 K/3000K, Luminous Efficacy (rated) (Nom) 28 lm/W, Housing Material Aluminum extruded ,Optical cover material Polycarbonate, IP65 , IK08, Surge protection, with foundation and all fixing acessories.LM79 Report from NABL approved lab is required to be submitted. BIS Certificate of Luminaire to be submitted. Make: Havells/LT/Philips/Klite/Wipro/Crompton |
| 120 | Supply, Installation & Commissioning of 12W Led Bush/Spike light with Aluminium Die Cast housing, IP66/65,(Embankment in grass area), Surge protection, IK07, 3000 K.BIS Certificate of Luminaire to be submitted.Make-LT/Havells/wipro/Jaquar/Philips/Crompton/Klite |
| 121 | Supply, Installation & Commissioning ofLED Step Light with the following technical specifications:- Luminous Flux 55 lm, Correlated Color Temperature (Nom) 4000 K/3000K, Luminous Efficacy (rated) 20 lm/W, Color rendering index (CRI) >70, fitting duly powder coated ,IP-67, IK08.LM79 Report from NABL approved lab is required to be submitted. BIS Certificate of Luminaire to be submitted.Make- Philips/LT/Havells/Wipro/Cromption/Klite |
| 122 | 7 METRE STREETLIGHT |
| 123 | Supply & Installation of 7mtr high Octagonal Pu painted GI pole . It shall be designed to withstand wind speed as per IS 875 Part III : 2015 . The shaft should conform to IS 2026 /BSEN 10025. The flange /Gussets /Door Stiffener as per IS 2026 /BSEN 10025. Foundation bolts of EN 8 grade. The door opening of the pole should be water proofed, with locking arrangement & arrangement of inbuilt junction box with 2 nos 6 Amp MCB& terminal block with provision for connection of phase, neutral & earth on insulating plate which will be kept inside the pole for termination of cable & wire. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. Finishing Hot dip galvanized to BS EN ISO 1461. The poles shall be hot dip galvanized with average coating thickness of 70 micron. (Make-Bajaj/Transrail/Calcutta Poles/Subham Pole/Crompton). |
| 124 | Supply & fixing of Single arm galvanised Pu painted highly furnished sword type special designed bracket length of 1500 mm width. Design will be as per direction of Engineer in Charge. |
| 125 | Erection of pole and construction of suitable civil foundation for above 7-meter High Pole.The RCC foundation (M20) for above Pole/Post should be exposed above ground level. 02 nos flexible PVC Pipe ofsuitable diameter to be kept inserted inside the RCC foundation for cable entry. The Pole/Post should beerected on the aforesaid RCC foundation. The design ofthe foundation should be as per site conditions and as approved by EIC. Details of Civil Foundation: SBC 10T/m^2 (Minimum), Grade of Steel Reinforcement Fe415/Fe 500. |
| 126 | Supply, Delivery, Installation and Commissioning of LED Pole mounted lighting fixture with the following technical specifications:-i) Surge protection of 4kv , ii) Housing Material Aluminium pressure die cast , iii) IP66 , iv) Optic material Polycarbonate , v)Luminous Flux 8,400 lm , vi)Luminous Efficacy (rated) (Nom) 140 lm/W, vii)Color rendering index (CRI) >70 , viii)Correlated Color Temperature (Nom) 5700 K ix) IK10 x) Median useful life L70B50 50,000 hour(s) for pathways/Road with all fixing acessories. Warranty period 5 years.LM 80 Report with TM21 projection for LED Chip is to be submitted .LM79 Report from NABL approved lab is required to be submitted. BIS Certificate of Luminaire to be submitted. Make: Bajaj/Lighting Tech/Philips/Crompton/Wipro/Havells |
| 127 | 4 METER SOLAR AIO POST TOP |
| 128 | Supply, installation and commissioning of 50W LED All in one integrated POST TOP UFO Shape solar street lights with two day back up with 4000 mm long 89mm dia steel pole having compact, aesthetic, ecofriendly & modernlook in extruded aluminium construction with high efficiency monocrystaline silicon photo voltaic panel, high efficiency SMD LED 5700K having secondary lens optics for street lighting distribution, high performance lithium battery, MPPT charger controller and inteligent control module/sensor with higher reliability, long service life. The cost including installation with RCC foundation and all accessories. Make:- PHILIPS/K-Lite/ Wipro/Panasonic/ Havells/Halonix/LT. |
| 129 | Main LT PanelSupply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrinkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required.Make of Switchgear-LK(FORMERLY L&T)/Schneider/ABB/Legrandi)Busbar -100 Amp Al busbar with SC rating of 25 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply ii)INCOMER One (1)- 100 Amp Moulded Case Circuit Breaker, FP, Breaking capacity – 25 KAwith 3 Nos Indicating lamp for ON/OFF/Tripwith control fuse/ MCB,One(1) set of –100/5A , 15VA , CL 1.0, CT One(1)Multifunction meter (V,A,KWHr, KW, P, F)One Set ON/OFF Indicating lamp with control fuse/ MCBiii)Three (3)- Outgoing feeders forElectrical room, Toilet Block & 01 nos spare,each comprising of1 Nos-25Amp, Miniature Circuit Breaker, DP, Breaking capacity – 10 kA iv)Four (4)- Outgoing feeders for External Lighting Feeder panel, PHE pump & 02 nos spare,each comprising of1 Nos-32Amp, Miniature Circuit Breaker, FP, Breaking capacity – 10 kA |
| 130 | EXTERNAL LIGHTING PANEL Supply, installation, testing and commissioning of cubicle type sectionalised, front operated bottom entry dust and vermin proof M.V..Panel Boards suitable for IP 54,operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required.Make of Switch Gear -L&T/Schneider/ABB/LegrandBusbar -32A ALbusbar with SC rating of 25KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.Incomer feeder consisting ofa)One (1)32 Amp,10kA,FP,MCB,C-CURVEb)1 Nos - TIMER WITH CONTRACTORc)Six(6) - Outgoing Feeders each comprising ofd)One (1) 10 Amp,SP,MCB,C-CURVEPANEL AS ABOVE |
| 131 | Cable, Cable Tray,End Termination & Cable JointingSupplying & Testing of 1.1 KV grade Copper XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.Make: Polycab, KEI, Gloster, Havells. |
| 132 | 4C X 25 sqmm A2XFY CABLE FOR MAIN INCOMER |
| 133 | 3C X 4 sqmm A2XFY CABLE FOR LIGHTING CIRCUIT |
| 134 | Supplying & Testing of 1.1 KV grade XLPE Armoured power Copper cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.Make: Polycab, KEI, Gloster, Havells. |
| 135 | 4C x 4 2XFY cable for PHE and External lighting Panel |
| 136 | 2C x 4 2XFY Cable for Electrical & Toilet block incomer |
| 137 | Cable layingLaying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade through existing RCC/HUME/METAL /HDPE pipe.upto 35 Sqmm |
| 138 | Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade on cable tray/surface.upto 35 Sqmm(clamped with 1mm thick saddle) |
| 139 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming toIS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground(75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required63 mm dia(OD-63 mm & ID-51 mm nominal) |
| 140 | TERMINATION OF CABLES :-Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) |
| 141 | 4C X 25 sqmm A2XFY CABLE FOR MAIN INCOMER |
| 142 | 3C X 4 sqmm A2XFY CABLE FOR LIGHTING CIRCUIT |
| 143 | 4C x 4 2XFY cable for PHE and External lighting Panel |
| 144 | 2C x 4 2XFY Cable for Electrical & Toilet block incomer |
| 145 | Cable traySupplying instalaltion hot dip galvanized perforatedtype cable traywith perforation not more than 17.5% of following size including installation along wall/ suspended from ceiling with brackets/ threaded suspenders including bends etc as requiredMake-BEC/MEM.150 mm (W) X 50 mm (H) with 1.6 mm thick sheet |
| 146 | Earthing |
| 147 | Earthing with GI earth pipe 4.5 meter long,40mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. |
| 148 | Providing and fixing 25mm X 5 mm GI strip at 0.50 meter below ground/surface including connection/termination with nut, bolt, spring, washer excavation and refilling(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as required. |
| 149 | Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
