Supply And Delivery Of Different Types Of Furniture For Borjora & Mejia Ccc Under Bankura Division Wbsedcl Supply And Delivery Of Different Type Office Furniture For Barjora And Mejia Ccc Under Bankura Divn , Supply At Barjora Ccc : Supply And Placement Of Godrej Make As Per Design Approve As Per Order Companion C-11 Material: Top 18 Mm Melamine Laminated Particle Board & Rest 15 Mm Paper Laminated Particle Board Hardware:Screw, Kd Fittings, Slides & Castors Construction:Knock Down Load Bearing Capacity:30 Kgs. Packets:1 No. Finish: Melamine Laminated Top & Rest Paper Lamination (Color: Honey) Dimensions: W 1200 X D 600 X H 750. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem. , Supply And Placement Of Godrej Make As Per Design Approve As Per Order Table Aristo 1350W Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Gromet Provided On Work Surface For Wire Management Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Handle Is Provided For Ease Of Opening. Storage Is Provided With Cam Lock For Security. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem. , Supply And Placement Of Godrej Make As Per Design Approve As Per Orderstorewel Plain Almirah 1. Models Plain With 4S2. Product Size: Plain (4S) - 916 Mm (W) X 486 Mm (D) X 1981 Mm (H) Dmx Drg.- St-095, Rev.0 3. Construction & Material Welded Construction.0.8 Mm Thk Crca For Back, Shelf & 0.9 Mm Thk Crca For All Other Components. 4. Configuration (Door) Full Height Steel Hinged Door5. Locking & Handle : Mazak Handle 3 Way Locking Mechanism With Shooting Bolt Arrangement.6. Shelving : Height Wise Adjustable Shelf Mounting Uniformly Distributed Load Capacity Per Each Full Shelf Is 80 Kg Maximum Plain 4S : 4 Nos. Of Adjustable Full Shelves. 7. Leveler M10 Screw Type Leveler With Hex Plastic Base 8. Finish Epoxy Polyester Powder Coated To The Thickness Of 50 Microns (+/-10).The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem. , Supply And Placement Of As Per Approve As Per Order Godrejmotion Chair Seat/Back Assembly: The Cushioned Seat Assembly Consists Of Seat Base Moulded In Glass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene In-Situ Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. Back Size : 45.5 Cm. (/1/) X 53.0 Cm. (H)Seat Size : 48.5 Cm. (W) X 49.0 Cm. (D) High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Used In Seat And Backcushion Is Moulded In Density Min 48 Kg/M3, And Hardness Load 15 ± 2 Kgf As Per Is:7888 For 25% Compression.. Tilt Mechanism, Spines & Spine Connector: The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi-Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjustments. The Cantilevered Seat Offers Impact Cushioning While Sitting And Synchronises With The Back Movement During Posture Changes. The S Shaped Spines Moulded In High Strength Glass-Filled Poly-Amide And The Spine Connector Moulded In Glass-Filled Poly-Amide Form The Back-Spine Structure Involved In Multi-Dimensional Recline Motion. The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limit Featurewhich Should Be Inbuilt In Seat Base And The Tension (Return Force) Should Be User Weight Dependent. Adjustable Armrests: The Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glass-Filled Poly-Amide: The Height Adjustment Feature Should Be Button Operated Having Adjustment Of 6.6±0.5Cm. The Armrest Top Should Be Made Up Of Integral Skin Pu Moulded Over Plastic Inner Moulded In Glass-Filled Poly-Amide. Pneumatic Height Adjustment: The Seating Height Can Be Adjusted With A Pneumatic Gas-Lift Having An Adjustment Stroke Of 9.2 ± 0.3 Cm Pedestal Assembly: The Pedestal Should Be Injection Moulded In Glass-Filled Poly-Amide And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.0±0.5 Cm. Pitch Centre Diameter And 76.0±1.0 Cm. With Castors. Twin Wheel Castors :5 Nos. Twin Wheel Castos Are Injection Moulded In Poly-Amide Having 5.0 ± 0.1 Cm Wheel Diamter Assembled To The Pedestal The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem. , Supply And Placement Of Godrej Make As Per Design Approve As Per Order Chair Fu 7046 The Seat And Back Shall Be Made From 1.2 ±0.1Cm Thk. Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Shall Be Upholstered With Fabric And Moulded Polyurethane Foam Together With Seat And Back Covers. The Back Foam Shall Bedesigned With Contoured Lumbar Support For Extra Comfort. The Dimensions Of Seat Shall Be45.0Cm(W) X 42.0Cm.(D) And Of Back Shall Be 40.0Cm(W) X 47.0Cm.(H). The Seat And Back Covers Shall Be Injection Moulded In Black Co-Polymer Polypropylene. The Hr Polyurethane Foam Shall Bemoulded With Density.=45±2.Kg/M3and Hardness Load 16±2 Kgf As Per Is:7888.For 25% Compression. The One-Piece Armrests Are Injection Moulded From Black Nylon. The Armrests Are Fitted To The Seat With Armrest Connecting Brackets Made Of 0.5± 0.05 Em. Thk. Hr Steel.The Permanent Contact Mechanism Shall Be Designed With 360° Revolving Type, 14±2°Maximum Back Tilt Only, Upright Position Locking, Tilt Tension Adjustment. The Pneumatic Height Adjustment Shall Has An Adjustment Stroke Of 11.0 ±0.3Cm. The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Injection Moulded In Black 30% Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 62.0 ±0.5Cm. Pitch-Centre Dia. (72.0 ±1.0Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Beseat Height - Min 43.0 To Max 54.0Cm, Height - Min87.5 To Max 98.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-71.0 Cm And Depth-71.0 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem. , Cello Perfect Super Delux Chair , Supply And Placement Of Godrej Make As Per Design Approve As Per Order Steel Book Rack Base Unit Overall Dimensions Ofsteel Book Rack Shall Be 36 Inch(W)X15inch(D)X72inch(H).Rigid Knockdown Construction ,Material Used Shall Be Crca 0.8 Mm Thick . The Stackability Shall Be Add-On Units Can Be Stacked Width Wise To Form A Bank Of Racks Having Common Side Panel . Number Of Adjustable Shelf Shall Be Five With 12 Loading Levels . Uniformly Distributed Load Capacity Per Each Shelf Is 80 Kg Maximum . Shelf Back Stiffenerat The Rear End Of The Shelves Shall Be Provided . These Are To Support Books On The Rear Side .The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem. , Supply And Placement Of As Per Approve As Per Order Godrej Pisa 3 Str Sofa Seat Foam: The Seat Should Bemade Of Pu Foam With Density 32 ± 2 Kg/Cu.Mtr Having An Additional Top Layer Of J Pu Foam With Density 28 ± 2 Kg/Cu. Seat Should Beupholstered With Fabric Or Leatherette. 2) Back Foam: The Back Should Bemade Of Pu Foam With Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 23±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette Understructre : Understructure Should Bemade Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywoodocp-Qlta-Pl14-18 4. Dia 4Mm Zigzag Spring Assembly Should Bemounted In Understructure For Support And Additional Cushioning Purposeleg Assembly: It Should Bea Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate.Width (W): 205.5 Cm. Depth (D): 92.0 Cm. Height (H): 82.0 Cm. Seat Height (Sh): 45.0 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem. , Supply At Mejia Ccc :Supply And Placement Of Godrej Make As Per Design Approve As Per Orderstorewel Plain Almirah 1. Models Plain With 4S2. Product Size: Plain (4S) - 916 Mm (W) X 486 Mm (D) X 1981 Mm (H) Dmx Drg.- St-095, Rev.0 3. Construction & Material Welded Construction.0.8 Mm Thk Crca For Back, Shelf & 0.9 Mm Thk Crca For All Other Components. 4. Configuration (Door) Full Height Steel Hinged Door5. Locking & Handle : Mazak Handle 3 Way Locking Mechanism With Shooting Bolt Arrangement.6. Shelving : Height Wise Adjustable Shelf Mounting Uniformly Distributed Load Capacity Per Each Full Shelf Is 80 Kg Maximum Plain 4S : 4 Nos. Of Adjustable Full Shelves. 7. Leveler M10 Screw Type Leveler With Hex Plastic Base 8. Finish Epoxy Polyester Powder Coated To The Thickness Of 50 Microns (+/-10).The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem. , Supply And Placement Of As Per Approve As Per Order Godrejmotion Chair Seat/Back Assembly: The Cushioned Seat Assembly Consists Of Seat Base Moulded In Glass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene In-Situ Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. Back Size : 45.5 Cm. (/1/) X 53.0 Cm. (H)Seat Size : 48.5 Cm. (W) X 49.0 Cm. (D) High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Used In Seat And Backcushion Is Moulded In Density Min 48 Kg/M3, And Hardness Load 15 ± 2 Kgf As Per Is:7888 For 25% Compression.. Tilt Mechanism, Spines & Spine Connector: The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi-Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjustments. The Cantilevered Seat Offers Impact Cushioning While Sitting And Synchronises With The Back Movement During Posture Changes. The S Shaped Spines Moulded In High Strength Glass-Filled Poly-Amide And The Spine Connector Moulded In Glass-Filled Poly-Amide Form The Back-Spine Structure Involved In Multi-Dimensional Recline Motion. The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limit Featurewhich Should Be Inbuilt In Seat Base And The Tension (Return Force) Should Be User Weight Dependent. Adjustable Armrests: The Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glass-Filled Poly-Amide: The Height Adjustment Feature Should Be Button Operated Having Adjustment Of 6.6±0.5Cm. The Armrest Top Should Be Made Up Of Integral Skin Pu Moulded Over Plastic Inner Moulded In Glass-Filled Poly-Amide. Pneumatic Height Adjustment: The Seating Height Can Be Adjusted With A Pneumatic Gas-Lift Having An Adjustment Stroke Of 9.2 ± 0.3 Cm Pedestal Assembly: The Pedestal Should Be Injection Moulded In Glass-Filled Poly-Amide And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.0±0.5 Cm. Pitch Centre Diameter And 76.0±1.0 Cm. With Castors. Twin Wheel Castors :5 Nos. Twin Wheel Castos Are Injection Moulded In Poly-Amide Having 5.0 ± 0.1 Cm Wheel Diamter Assembled To The Pedestal The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem. , Supply And Placement Of Godrej Work Table Of Size 1500X750x740 As Per Drawing Worktopmade From 25 Mm Thick Pre-Laminated Particle Board. All The Edges Are Sealed With 2 Mm Thick Pvc Edge Band All Around Side Panels Made From 25 Mm Thick Pre-Laminated Particle Board. All The Edges Are Sealed With 2 Mm Thick Pvc Edge Band On The User Side And 0.8 Mm On The Top And Bottom Side. The Side Panels Have 2 Glide Screws Each For Leveling Of The Desk. Modesty Panel Made From 18 Mm Thick Pre-Laminated Particle Board. All The Edges Are Sealed With 0.8 Mm Thick Pvc Edge Band All Around Free Standing Pedestalthe Freestanding Pedestal Is Made From 18 Mm Pre-Laminated Particle Board With A Combination Of 2Mm And 0.8 Mm Pvc Edge Band On All The Exposed Surfaces As Per Requirement. The Drawers Are Provided With Suitable Slides For Smooth Operation. All The Pedestal Drawers Are Centrally Locked With A Single Key. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem. , Supply And Placement Of Godrej Make Earl Visitor Chair As Per Design Approve As Per Order With Seat And Back Made Up Of 1.2+/-0.1 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Should Be Designed With Contoured Lumbar Support For Extra Comfort. Back Size: 49.5Cm.(W) X 45.5Cm.(H) Seat Size: 49.5Cm.(W) X 43.0Cm.(D). The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M3 And Hardness = 20 +/- 2 On Hampden Machine At 25% Compression. The One Piece Armrest Should Be Made Of Black Integral Skin Polyurethane With 50-70 Shore Hardness And Reinforced With Ms Insert. The Armrests Are Scratch And Weather Resistant And Should Be Fitted To The Seat With Seat Armrest Connecting Bracket Made Of 0.3+/-0.022Cm Thick Hr Steel.The Understructure Should Be A Tubular Frame Of Cantilever Type Made Of 2.54+/-0.03Cm X0.2+/-0.16 Cm Thick Ms Erw Tube And Black Powder Coated. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul), Idm For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accreditedorganization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). The Bidder Should Either Be An Oem Or Authorized Dealer Of The Oem.
