Tender For Manufacturing, Fabrication And Fixing Of Ms Doors Size 6-0 X 3-0 Made Out Of Ms Sheet Having Gauge Of 1 Mm Thick, Ms Angle Ms Sheet, Ms Flat, Hold Fast, Kundi, Handle, Hinges, Electric Rods Charges, Gen Set, Charges, Welding And Finishing With Good Quality Paint (Two Coats) Complete In All Respects. Repair of MS doors of size 6-0 x 3-0 including the cost of cutting welding complete in all respect as per satisfaction of EIC Providing and fixing of MS Hardware Kundi, handle, hinges, kabza including cost of nut bots and electric rods charges, generator set charges, welding and finishing with good quality paint (Two coats) complete in all respects. Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil Disposal of building rubbish/malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Ingineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR item No. 15.60 Providing and fixing PTMT bib cock of approved quality and colour 15 mm normal bore, 122 mm long weighing not less than 99 gms Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.17.28.2 Flexible pipe, 17.28.2.2 40 mm dia 2 Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: 17.32.2 Rectangular shape 453x357 mm Providing and fixing of PVC pipe including specials labour for fixing trenching refilling PVC solvent and testing as per satisfaction of EIC 110 mm dia. PVC pipe. Make: PRINCE/DIPLAST/SUPREME/JINDAL Providing and fixing of PVC pipe including specials labour for fixing trenching refilling PVC solvent and testing as per satisfaction of EIC Plastic Mug(1.5 litre) (milton) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Make: PARAG/ESTRAL/PHONELEX 20 mm nominal outer dia Pipes 25 mm nominal outer dia Pipes Providing and fixing PTMT, push cock of approved quality and olour.18.57.1 15 mm nominal bore, 98 mm long, weighing not less than 75 gms. Providing and fixing gate valve made PTMT/ CPVC or other equal brand for water tank of approved quality and colour. Providing and fixing union made PTMT/ CPVC or other equal brandfor water tank of approved quality and colour. Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 18.18.220 mm nominal bore Providing and placing on terrace (at all floor levels) polyethylene water storage tank, I5 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Repair of damaged existing Constructing brick masonary chamber for under ground C.I. inspection chamber including repair of damaged bricks, chamber walls, benching and cleaning of inspection chamber complete in all respects as per satisfaction of EIC. C.I. cover and frame 300x300 mm inside C.L. cover without frame 300x300 mm inside weight not less than 4.50 kg. 1 Replacement of damaged existing RCC MH cover & frame HD-20 size 450x 450 mm for chamber as per DSR. Making connection of drain or sewer line with existing manhole and making good the walls, floors with C.C. (1:2:4) mix. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: 19.21.1 For pipes 100 to 250 mm diameter Providing and fixing 50 watt LED flood light with bracket out side on the wall complete in all respects Supply and Erection of PVC pipe heavy Duty & HDPE pipe HD (fire) Retardant) for wiring process including bends, inspection boxes etcHDPE Ilectrical conduit pipe 20mm dia (ISI marked) flushed (make Diplast. Suprem, polydet) Supplying and fixing following size/ modules, GI/PVC box alongwith modular base & cover plate for modular switches in recess etc.as required. 1:27.4 6 Module (200mmX75mm) E Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 1.24.1 5/6 A switch 1.24.3 15/16 A switch 1.24.4 3 pin 5/6 A socket outlet 1.24.5 6 pin 15/16 A socket outlet Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C.posts, struts, earth work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. 16.17.1 With G.I. barbed wire Supplying at site 16.15.1 R.C.C. Standards post/ struts/rails/pales of mix 1:1.5:3 (1 cement: 1.5 coarse sand 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to starches. Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Finishing walls with Acrylic Smooth exterior paint of required shade: 13.46.1 New work (Two or more coat applied @ 1.67ltr / 10 | sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Writing of slogan and making drawing/images regarding promotion of Swatch Bharat Abhiyan etc. including cost of 1 quality paint, brush, labour etc. Complete in all respects as per direction of EC. (NSI) Proving and fixing of Laminated Sun Sign Board Material for indication of various sign board in Toilet Block of Size 36 ^ prime prime *30^ prime prime Toilet ID Board) 12 ^ prime prime *12^ prime prime MALE/FEMALE), Differently abled, Child Friendly 8X12 (Google Map), (Sanitary Napkin Machine), QR Code 12 ^ prime prime *8^ prime prime 0| No Smoking) (Transgender) 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement 1.5 fine sand: 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 19,30.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets: 19.30.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Providing and fixing M. S. sheetFrame Size 18X19 with M.S angle, fasteners with the help of mason, labor& electric cutter including welding set with welding rods, gen set, welding and finishing with good quality paint (Two coats) Complete in all respects .
