Providing Rates For Supply/Fixing Of Various Items As Per Bill Of Quantity For Meerut Mandal (Part-Iv) , Modular Physics Lab Providing And Fixing Laboratory Tables Understruture Consists Of D-Frames Assembly, Horizontal Members With Grantie Top And Cover Panels. These Understructures Shall Be Of 800/860Mm Height As Per Site Requirement Or As Per The Direction Of Engineer-In-Charge. The Paymnet Will Be Made After The Measurementoftop Surface Area And Uom Mentioned In Boq . All D-Frames Assemblies Should Be Manufactured From Standard Hollow Metal Sections; Confirming To I.S. Code7138:1973 (Indian Standard Specification For Steel Tubes For Furniture) And All Sheet Metal Components Should Be Of Crca Confirming To Is Code 513:1994. The Dimensions Of D Frame Shall Depend Upon The Depth Of The Understructure. The Overall Depth Of D-Frame Shall Be 480Mm For 600Mm Depth And 555Mm For 750Mm Depth Structure (Referred As F In Drawing) And 160Mm For 600Mm Depth & 235Mm For 750Mm Depth Extended Frame (Referred As G In Drawing). All Frame-Work Should Be Pre-Treated With Superior Pure Epoxy Powder Coated Finish With 50 Micron Thickness. The D-Frames Should Have A Provision To Fix Suspended Storage Cabinets. Side Frame Welded Ms Erw Tube Of Dimension 50 X 25 X 1.6Mm Thickness Minimum. Bracket For Pipe : Ms Crca 2Mm Thick..Levelling Screws: 4 Nos. Of M-10 Levellers (Ms + Nylon) Adjustments Possible With Range20mm.D Frame Should Be Placed At The All End Points And Where The Centre Gap Between Two Cabinets Is More Than 750 Mm , Horizontal Memebers Are Used Tosupport Granite Between The Storagesto Form The Structural Support. Horizontal Members Should Be Made Be Jointfrom Crca Plate/Clampof 2Mm Thickness. Cross-Sectional Dimensions Of The Pipe Should Be 50 X 25Mm With A Minimum Of 1.6 Mm. They Should Be Made Of Crca Ms And Coated With Pure Epoxy Powder. . Together With The D-Frames And Storages With Horizontal Members Connected Together. , All Side Cover Panels And Back Panels, Filler Panels Should Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating With Thickness Of 50 Microns , The Complete Structure Shall Be Provided With A Work Top Made Of 18Mm(+/-2Mm) Thick Black Granite.The Exposed Edges Of The Work Top Should Be Chamfered And Smoothened.The Bottom Of The Work Top Should Be Polished And There Should Be A V Groove Through Out The Length Of The Exposed Edges To Protect The Cabinets From Coming In Contact With The Spillages.The Over Hangon The Storage Cabinet Is 25Mm At The Frontside And 30Mm At The Sides.The Back In Gm At Erial Used Is An Eoprenema To F 6Mm Thickness. Are Present Ation The Worktop Edges Is Shown , Providing And Fixing Work Bench Storage Cabinets. The Storage Cabinet Shall Be Welded Body With Load Bearing Members Such As Top, Bottom And Stiffeners Made Of 0.8Mm Thick Crca Sheet.. The Storage Unit Shall Be Provided With A Shelf Made Of 0.8Mm Thick Crca Sheet Which Is Adjustable . Each Shelf To Have Load Carrying Capacity Of 40 Kgs. Shutterhas A Sandwich Construction With Profile . The Complete Storage Unit Should Be Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Is Suspended On Tubular Structure. . Drawer And Shutter Shall Be Provided With A Lock 180 Degree Cam With 4Mm Thick Lever. Rateincludes The Rates Of 4 Pipes Supporting The Storages, All The Above Items Should Be As Per Specifications & Direction Of Engineer-In-Charge.Storage Unit Of Size 600Mm(W) X 540Mm(D) X 675-735Mm(H) With 1 Drawer And 2 Shutters , Providing And Fixing Metal Raceway Above The Granite Top In Traingular Shape Having Cutout For 3 Module Plate To Be Provided With Electricals Switches And Sockets Of Anchor Made Or Similar. . Raceway Made Of Minimum 0.8 Mm Thick Frame. Shelf : The Finish Should Be Pure Epoxy Coating Of 50Micron Thickness.All The Above Items Should Be As Per Photo, Sketch Specifications & Direction Of Engineer-In-Charge. , Modular Chemistry Lab Providing And Fixing Laboratory Tables Understruture Consists Of D-Frames Assembly, Horizontal Members With Grantie Top And Cover Panels. These Understructures Shall Be Of 800/860Mm Height As Per Site Requirement Or As Per The Direction Of Engineer-In-Charge. The Paymnet Will Be Made After The Measurementoftop Surface Area And Uom Mentioned In Boq . All D-Frames Assemblies Should Be Manufactured From Standard Hollow Metal Sections; Confirming To I.S. Code 7138:1973 (Indian Standard Specification For Steel Tubes For Furniture) And All Sheet Metal Components Should Be Of Crca Confirming To Is Code 513:1994. The Dimensions Of D Frame Shall Depend Upon The Depth Of The Understructure. The Overall Depth Of D Frame Shall Be 480Mm For 600Mm Depth And 555Mm For 750Mm Depth Structure (Referred As F In Drawing) And 160Mm For 600Mm Depth & 235Mm For 750Mm Depth Extended Frame (Referred As G In Drawing). All Frame-Work Should Be Pretreated With Superior Pure Epoxy Powder Coated Finish With 50 Micron Thickness. The D-Frames Should Have A Provision To Fix Suspended Storage Cabinets. Side Frame Welded Ms Erw Tube Of Dimension 50 X 25 X 1.6Mm Thickness Minimum. Bracket For Pipe : Ms Crca 2Mm Thick..Levelling Screws: 4 Nos. Of M-10 Levellers (Ms + Nylon) Adjustments Possible With Range 20Mm.D Frame Should Be Placed At The All End Points And Where The Centre Gap Between Two Cabinets Is More Than 750 Mm . , Horizontal Memebers Are Used Tosupport Granite Between The Storagesto Form The Structural Support. Horizontal Members Should Be Made Be Jointfrom Crca Plate/Clampof 2Mm Thickness. Cross-Sectional Dimensions Of The Pipe Should Be 50 X 25Mm With A Minimum Of 1.6 Mm. They Should Be Made Of Crca Ms And Coated With Pure Epoxy Powder. . Together With The D-Frames And Storages With Horizontal Members Connected Together , All Side Cover Panels And Back Panels, Filler Panels Should Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating With Thickness Of 50 Micron , The Complete Structure Shall Be Provided With A Work Top Made Of 18Mm(+/-2Mm) Thick Black Granite.The Exposed Edges Of The Work Top Should Be Chamfered And Smoothened.The Bottom Of The Work Top Should Be Polished And There Should Be A V Groove Through Out The Length Of The Exposed Edges To Protect The Cabinets From Coming In Contact With The Spillages.The Over Hangon The Storage Cabinet Is 25Mm At The Frontside And 30Mm At The Sides.The Back In Gm At Erial Used Is An Eoprenema To F 6Mm Thickness. Are Present Ation The Worktop Edges Is Shown , Providing And Fixing Work Bench Storage Cabinets. The Storage Cabinet Shall Be Welded Body With Load Bearing Members Such As Top, Bottom And Stiffeners Made Of 0.8Mm Thick Crca Sheet.. The Storage Unit Shall Be Provided With A Shelf Made Of 0.8Mm Thick Crca Sheet Which Is Adjustable . Each Shelf To Have Load Carrying Capacity Of 40 Kgs. Shutterhas A Sandwich Construction With Profile . The Complete Storage Unit Should Be Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Is Suspended On Tubular Structure. . Drawer And Shutter Shall Be Provided With A Lock 180 Degree Cam With 4Mm Thick Lever. . Rateincludes The Rates Of 4 Pipes Supporting The Storages, All The Above Items Should Be As Per Specifications & Direction Of Engineer-In-Charge.Storage Unit Of Size 600Mm(W) X 540Mm(D) X 675-735Mm(H) With 1 Drawer And 2 Shutter , Providing And Fixing Sink Units Of Size 600Mm(W) X 540Mm(D) X 675-735Mm(H) Minimum Which Comprises Of Sink Cabinet, Polypropylene Sink Unit And 1-Way Goose Neck 360 Degree Revolving Faucet.A. Sink Cabinet: Providing And Fixing Sink Cabinet. The Sink Cabinet Shall Be Welded Body With Load Bearing Members Such As Top, Bottom And Stiffeners Made Of 0.8Mm Thick Crca Sheet. The Cabinet Unit Shall Be Provided With Pair Of Shutters. Shutter Has A Sandwich Construction . The Complete Unit Should Be Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Is Resting On Tubular Structure, . Rateincludes The Rates Of 4 Pipes Supporting The Storages. B. Polypropylene Sink Assembly: Providing And Fixing Polypropylene Sink With Pp Waste, Anti-Siphon Bottle Trap & Flexible Drainage Pipe. Sink Bowl Shall Be Polypropylene Molded Made Up Of 5Mm Thick High Density And Elastic Poly Propylene With Good Resistance To Organic Solvents. Standard Bowl Size Is 500Mm(L) X 400Mm(W) X 300Mm(D). C. 1 Way Water Faucet: Providing And Fixing 1-Way 360 Degree Revolving Water Faucet. Faucet Fittings Should Be Laboratory Grade. Water Faucet And Valve Bodies Should Be Cast Red Brass Alloy Or Bronze Forgings, All Fittings Should Be Powder Plated. Brass As Peris:319, Pipe As Per : Is:407,O Utlet Nipple In Pp Construction. Pp Knob To Be Used. All Gasket And O-Ring Of Nitrile Rubber Make. Inlet Connection 1/2 Bsp. Gooseneck Spout With 360 Degree Rotation With 500000 Life Cycles. Pneumatic Test At 250 Psi, Hydraulic Test At 125 Psi, Bursting Test At 500 Psi. Coating To Be Glossy Epoxy Fusion Bond.All The Above Items Should Be As Per Specifications & Direction Of Engineer-In-Charg , Providing And Fixing 2 Tier Reagent Racks Of Size 1800Mm(L) X 300Mm(W) X 680Mm(H). It Should Be Complete Modular Design Consisting Of 2 Stage Horizontal Storage Shelves Made Of Minimum 0.8 Mm Thick Frame. Shelf : Crca Ms With Pure Epoxy Powder Coating And Having Cutouts For Electrical Switches And Sockets. It Should Have Provision For Placing Granite Pieces. Cutout For 3 Module Plate To Be Provided With Electricals Switches And Sockets Of Anchor Made Or Similar. The Finish Should Be Pure Epoxy Coating Of 50Micron Thickness.Load Carrying Capacity Of 70Kg For Island Table. All The Above Items Should Be As Per Specifications & Direction Of Engineer-In-Charge. , Modular Biology Lab Providing And Fixing Laboratory Tables Understruture Consists Of D-Frames Assembly, Horizontal Members With Grantie Top And Cover Panels. These Understructures Shall Be Of 800/860Mm Height As Per Site Requirement Or As Per The Direction Of Engineer-In-Charge. The Paymnet Will Be Made After The Measurementoftop Surface Area And Uom Mentioned In Boq . All D-Frames Assemblies Should Be Manufactured From Standard Hollow Metal Sections; Confirming To I.S. Code 7138:1973 (Indian Standard Specification For Steel Tubes For Furniture) And All Sheet Metal Components Should Be Of Crca Confirming To Is Code 513:1994. The Dimensions Of D Frame Shall Depend Upon The Depth Of The Understructure. The Overall Depth Of Dframe Shall Be 480Mm For 600Mm Depth And 555Mm For 750Mm Depth Structure (Referred As F In Drawing) And 160Mm For600mm Depth & 235Mm For 750Mm Depth Extended Frame (Referred As G In Drawing). All Frame-Work Should Be Pre Treated With Superior Pure Epoxy Powder Coated Finish With 50 Micron Thickness. The D-Frames Should Have A Provision To Fix Suspended Storage Cabinets. Side Frame Welded Ms Erw Tube Of Dimension 50 X 25 X 1.6Mm Thickness Minimum. Bracket For Pipe : Ms Crca 2Mm Thick..Levelling Screws: 4 Nos. Of M-10 Levellers (Ms + Nylon) Adjustments Possible With Range 20Mm.D Frame Should Be Placed At The All End Points And Where The Centre Gap Between Two Cabinets Is More Than 750 Mm . , Horizontal Memebers Are Used Tosupport Granite Between The Storagesto Form The Structural Support. Horizontal Members Should Be Made Be Jointfrom Crca Plate/Clampof 2Mm Thickness. Cross-Sectional Dimensions Of The Pipe Should Be 50 X 25Mm With A Minimum Of 1.6 Mm. They Should Be Made Of Crca Ms And Coated With Pure Epoxy Powder. . Together With The D-Frames And Storages With Horizontal Members Connected Together , All Side Cover Panels And Back Panels, Filler Panels Should Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating With Thickness Of 50 Micron , The Complete Structure Shall Be Provided With A Work Top Made Of 18Mm(+/-2Mm) Thick Black Granite.The Exposed Edges Of The Work Top Should Be Chamfered And Smoothened.The Bottom Of The Work Top Should Be Polished And There Should Be A V Groove Through Out The Length Of The Exposed Edges To Protect The Cabinets From Coming In Contact With The Spillages.The Over Hangon The Storage Cabinet Is 25Mm At The Frontside And 30Mm At The Sides.The Back In Gm At Erial Used Is An Eoprenema To F 6Mm Thickness. Are Present Ation The Worktop Edges Is Shown , Providing And Fixing Work Bench Storage Cabinets. The Storage Cabinet Shall Be Welded Body With Load Bearing Members Such As Top, Bottom And Stiffeners Made Of 0.8Mm Thick Crca Sheet.. The Storage Unit Shall Be Provided With A Shelf Made Of 0.8Mm Thick Crca Sheet Which Is Adjustable . Each Shelf To Have Load Carrying Capacity Of 40 Kgs. Shutterhas A Sandwich Construction With Profile . The Complete Storage Unit Should Be Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Is Suspended On Tubular Structure. . Drawer And Shutter Shall Be Provided With A Lock 180 Degree Cam With 4Mm Thick Lever. . Rateincludes The Rates Of 4 Pipes Supporting The Storages, All The Above Items Should Be As Per Specifications & Direction Of Engineer-In-Charge. Storage Unit Of Size 600Mm(W) X 540Mm(D) X 675-735Mm(H) With 1 Drawer And 2 Shutters , Providing And Fixing Sink Units Of Size 600Mm(W) X 540Mm(D) X 675-735Mm(H) Minimum Which Comprises Of Sink Cabinet, Polypropylene Sink Unit And 1-Way Goose Neck 360 Degree Revolving Faucet.A. Sink Cabinet: Providing And Fixing Sink Cabinet. The Sink Cabinet Shall Be Welded Body With Load Bearing Members Such As Top, Bottom And Stiffeners Made Of 0.8Mm Thick Crca Sheet. The Cabinet Unit Shall Be Provided With Pair Of Shutters. Shutter Has A Sandwich Construction . The Complete Unit Should Be Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Is Resting On Tubular Structure, . Rateincludes The Rates Of 4 Pipes Supporting The Storages.B. Polypropylene Sink Assembly: Providing And Fixing Polypropylene Sink With Pp Waste, Anti-Siphon Bottle Trap & Flexible Drainage Pipe. Sink Bowl Shall Be Polypropylene Molded Made Up Of 5Mm Thick High Density And Elastic Poly Propylene With Good Resistance To Organic Solvents. Standard Bowl Size Is 500Mm(L) X 400Mm(W) X 300Mm(D). C. 1 Way Water Faucet: Providing And Fixing 1-Way 360 Degree Revolving Water Faucet. Faucet Fittings Should Be Laboratory Grade. Water Faucet And Valve Bodies Should Be Cast Red Brass Alloy Or Bronze Forgings, All Fittings Should Be Powder Plated. Brass As Peris:319, Pipe As Per : Is:407,O Utlet Nipple In Pp Construction. Pp Knob To Be Used. All Gasket And O-Ring Of Nitrile Rubber Make. Inlet Connection 1/2 Bsp. Gooseneck Spout With 360 Degree Rotation With 500000 Life Cycles. Pneumatic Test At 250 Psi, Hydraulic Test At 125 Psi, Bursting Test At 500 Psi. Coating To Be Glossy Epoxy Fusion Bond. All The Above Items Should Be As Per Specifications & Direction Of Engineer-In-Charge , Providing And Fixing 2 Tier Reagent Racks Of Size 1800Mm(L) X 300Mm(W) X 680Mm(H). It Should Be Complete Modular Design Consisting Of 2 Stage Horizontal Storage Shelves Made Of Minimum 0.8 Mm Thick Frame. Shelf : Crca Ms With Pure Epoxy Powder Coating And Having Cutouts For Electrical Switches And Sockets. It Should Have Provision For Placing Granite Pieces. Cutout For 3 Module Plate To Be Provided With Electricals Switches And Sockets Of Anchor Made Or Similar. The Finish Should Be Pure Epoxy Coating Of 50Micron Thickness.Load Carrying Capacity Of 70Kg For Island Table. All The Above Items Should Be As Per Specifications & Direction Of Engineer-In-Charge , Modular Kitchen ;-Making Of The Kitchenoverhead/Low Storage Cabinets Carcass And Shutters In 18Mm Thick Commercial Board With 4Mm Frosted Glass. Carcass Compeleted With 4 Side Panels With Required Shelfs. Depth Will Be Standerd Base Units-600Mm. Included Hinges, Handles, Pvc Legs, Wall Hanging Brackets, Metal Wire Cutlery And Plate Holder.Overhead Cabinet Height Will Be Of 600Mm From Floor Overhead Cabinet Shutters Will Be Open In Groove. , Modular Kitchen ;-Providing & Fixing Decorative High Pressure Laminated Sheet Of Plain / Wood Grain In Gloss / Matt/ Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is : 2046 Type S, Including Cost Of Adhesive Of Approved Quality.1.0 Mm Thick Note:- Both Side Laminate , Modular Kitchen ;-Providing And Fixing Ready Made 304 Grade Stainless Steel Modular Kitchen Basket And Accessories Such As Right Angle Basket (Plain Cup & Saucer, Plant, Partition, Bottle Rack, Thali, Cutlery) Kitchen Utensil Basket, Dinner Set Basket, Kitchen Grain Basket, Multipurpose Basket As Per Site Requirement Including Finishing (Wherever Required) And Fittings. The Same Shall Be Fixed With Necessary Stainless Steel Nuts & Bolts, Stainless Steel Screws & Telescopic Channel Etc. As Per Direction Of Engineer-Incharge. (For Payment Purpose Only Weight Of Stainless Steel Basket Shall Be Considered Excluding Weight Of All Fixing Accessories Such As Nuts, Bolts, Fasteners Telescopic Basket Channels Etc. Payment Of Providing And Fixing Telescopic Channel Shall Be Paid Separately) , Modular Kitchen ;-Providing And Fixing 2Mm Thick 16 To 19Mm Wide Pvc Edge Binding Tape Of Approved Quality For Cupboard/Wardrobe Shutters Including Necessary Synthetic Resin Hot Pressed To Edges On Binding Machine Etc. Complete As Per Directions Of Engineer- In-Charge. , Providing And Fixing Tiled False Ceiling Of Specified Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams/ Sqm, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. Gi Metal Ceiling Lay In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm, And 0.5 Mm Thick With 8 Mm Drop; Made Of G I Sheet Having Galvanizing Of 100 Gms/Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending. , Providing And Fixing Stainless Steel ( Grade 304) Railing/ Ss Door Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-Incharge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Ss Gate 41 Nos. 41X45= 1845 Kg , Same Above But Ss Staircase Railing 15X250 = 3750 Kg , Providing And Fixing Wire Gauge Shutters Using Stainless Steel Grade 304 Wire Gauge With Wire Of Dia 0.5 Mm And Average Width Of Aperture 1.4 Mm In Both Directions For Doors, Windows And Clerestory Windows With Necessary Screws :30 Mm Thick Shutters,With Isi Marked Stainless Steel Butt Hinges Of Required Size,Second Class Teak Wood , Providing And Fixing Bright Finished Stainless Steel 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. Make:- Hettich, Godrej Or Equivelent , Granite Work (Polished And Machine Cut) Of Thickness 18Mm For Wall Lining (Veneer Work) Backing Filled With A Grout Of 12 Mm Thick Average In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing With White Cement Mortar 1:2 (1 White Cement : 2 Marble Dust) With An Admixture Of Pigment To Match The Granite Shade: (To Be Secured To The Backing By Means Of Cramps, Which Shall Be Paid For Separately).Granite Of Any Colour And Shade , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes.110 Mm Diameter , Providing And Fixing 1Mm Thick M.S. Sheet Door Shutter Size 600X600mm With All Necessary Fittings Complete, Including Applying A Powder Coated Paint 70 Micron Of Approved Quality & Brand And Manufacture To Give An Even Shade. , Rcc Bed Plywood On Bedin Dormitory As Per Attached Aor , Construction Of Granular Sub-Base By Providing Close Graded Material Conforming To Specifications, Mixing In A Mechanical Mix Plant At Omc, Carriage Of Mixed Material By Tippers To Work Site, For All Leads & Lifts, Spreading In Uniform Layers Of Specified Thickness With Motor Grader On Prepared Surface And Compacting With Vibratory Power Roller To Achieve The Desired Density, Complete As Per Specifications And Directions Of Engineer-In-Charge.With Material Conforming To Grade-I (Size Range 75 Mm To 0.075 Mm) Having Cbr Value-30 , Providing And Laying C.C. Pavement Of Mix M-30 With Ready Mixed Concrete From Batching Plant. The Ready Mixed Concrete Shall Be Laid And Finished With Screed Board Vibrator , Vacuum Dewatering Process And Finally Finished By Floating, Brooming With Wire Brush Etc. Complete As Per Specifications And Directions Of Engineer-Incharge , Genrator Set 25Kv Kirloskar , Genrator Set 58.5Kvkirloskar , Providing And Fixing Chicken Mesh For Aac Block Work Plaster , Brick Work With Common Burnt Clay Machine Moulded Modular Bricks Of Class Designation 12.5 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10 Mm Wide 12 Mm Deep Complete In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand).Above Plinth Level Upto Floor V Level , Providing And Fixing Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Decorative Type Flush Door Shutter Of Required Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Having Minimum Density Of 650 Kg/ Cum And Screw Withdrawal Strength Of 1800 N (Face) & 900 N (Edge), Minimum Compressive Strength 50 N/Mm2, Modulus Of Elasticity 850 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant. Wpc To Be Laminated With Pvc Foil Of Minimum 14 Microns Thick Of Approved Design Pasted With Hot Melt Adhesive On Both Faces Of Shutter And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk S.S Screws, All As Per Direction Of Engineer-In- Charge. (Note: Stainless Steel Butt Hinges And Necessary S.S Screws Shall Be Paid Separately). 30 Mm Thick , Providing And Laying 60Mm Thick Faciory Made Cement Concrete Interlocking Paver Block Of M -30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Line Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. , Finishing Walls With Weather Coat Paint Of Required Shade :New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm). Make:- Cico
