|
| 1 | Stone Aggregate(single size): 40 mm nominal size |
| 2 | Stone Aggregate(single size):20 mm nominal size |
| 3 | Stone Aggregate(single size): 10 mm nominal size |
| 4 | Stone Aggregate(single size): 6 mm nominal size |
| 5 | Coarse sand (zone III) |
| 6 | Portland Cement |
| 7 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 8 | Vibrator (Needle type 40 mm) |
| 9 | Stone for masonry work |
| 10 | Twisted steel/deformed bars |
| 11 | Solid blocks of size 30x20x15cm |
| 12 | Fine sand (zone IV) |
| 13 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 14 | Acrylic exterior paint |
| 15 | Exterior primer |
| 16 | Flats up to 10 mm in thickness |
| 17 | Welding by electric plant |
| 18 | Red oxide Zinc chromate primer |
| 19 | Structural steel such as tees, angles, channels and R.S. joists |
| 20 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 21 | Beam clamp 300-380 mm (450-1070 mm) |
| 22 | Aracanut post |
| 23 | Bamboo/kallanmula |
| 24 | G.I pipes 50 mm dia |
| 25 | G.I. pipes 40 mm dia |
| 26 | GI trafford profile sheet 0.35mm thick |
| 27 | Stainless steel screws 50 mm |
| 28 | PVC bend 63 mm dia |
| 29 | PVC Tee 63x63x63 mm dia |
| 30 | PVC end cap 63 mm dia |
| 31 | PVC Elbow 63 mm dia |
| 32 | PVC pipe 63 mm outer dia. 4 kgf/cm2 |
| 33 | PVC Reducer 63x50 mm dia |
| 34 | PVC vent cowl 63 mm dia |
| 35 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 36 | wall form panel 1250x500 mm |
| 37 | 100 mm channel shoulder 2.5 m long |
| 38 | Double clip (bridge clip) |
| 39 | Single clip |
| 40 | M.S. Tube 40 mm dia |
| 41 | Laterate stone of size 40x20x15cm |
| 42 | Solid blocks of size 30x20x20cm |
| 43 | Galvanised steel corrugated sheets |
| 44 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 45 | Galvanised steel J or L hooks 8 mm dia |
| 46 | G.I Limpet washer |
| 47 | Bitumen washer |
| 48 | Roofing paint for iron sheets in red colour |
| 49 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
| 50 | Wire nails |
| 51 | Mild steel plates |
| 52 | Mild steel rivets |
| 53 | 20 mm dia holding down bolts |
| 54 | Quarry Waste |
| 55 | Corner angle 45x45x5 mm 1.50 m long |
| 56 | Bamboo 25 mm dia 2.5 meter long |
| 57 | Separation Membrane of impermeable plastic sheeting 125 micron thick |
| 58 | Boulder 50 mm to 200 mm |
| 59 | Crates made of MEsh type 10x12 (D=100mm) Zinc coated (Mash wire diameter 3.00 mm) |
| 60 | Green Net 75% shade |
| 61 | Polyurethene bags |
| 62 | Royalty for good earth |
| 63 | Interlocking C.C. paver block (80 mm thick, M-30) |
| 64 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
| 65 | Mild steel tubes hot finished welded type |
| 66 | 200 mm Aluminium aldrop |
| 67 | Second class kail wood in planks |
| 68 | Second class kail wood in scantling |
| 69 | Safeda ballies 125 mm diameter |
| 70 | Mild steel round bar 12 mm dia and below |
| 71 | PVC pipe 15 mm outer dia. 12kgf/cm2 |
| 72 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 73 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 74 | Vitreous China orrisa type w.c. pan size 580 mm |
| 75 | Vitrified floor tile 60x60 cm |
| 76 | Hollock ballies 125 mm diameter |
| 77 | Adjustable span ESO+SI (2.35-3.40) |
| 78 | Anjili wood scantls |
| 79 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 80 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 81 | Bright finished or black enameled mild steel screws 40 mm |
| 82 | Bright finished or black enameled mild steel screws 20 mm |
| 83 | Anjili wood planks |
| 84 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 85 | Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile |
| 86 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
| 87 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
| 88 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 89 | Chromium plated Brass screws 25 mm |
| 90 | Iron hooks & eyes 100 mm |
| 91 | Anodised Aluminium tower bolt (barrel type)300x10 mm |
| 92 | Chromium plated Brass screws 30 mm |
