|
| 1 | Displacement (CC) / Engine capacity. 700 cc - 1250 cc |
| 2 | Max Power 20-30BHP @ 2500 rpm and above |
| 3 | Max Torque 500NM @ 2000 rpm and above |
| 4 | Type of fuel Diesel |
| 5 | Load Capacity 2 cu.m |
| 6 | Vehicle emission NormsBS _VI. |
| 7 | No of cylinder in engine 2 - 4 cylinder |
| 8 | Length of chassis 3800 mm - 3950 mm |
| 9 | Width of chassis 1500 mm - 1550 mm.Ground clearance. 150 mm -165mm |
| 10 | Fuel tank capacity Diesel-30 Ltrs to 40 ltrsCNG- 12-25kg |
| 11 | Size of Tyre\"s & No\"s 145R12-5Nos. |
| 12 | wheel base 1900 mm - 2250 mm |
| 13 | Gross vehicle weight 1550 kg - 1900 k9 |
| 14 | ClutchSingle plate dry friction diaphragm |
| 15 | Transmission System Manual |
| 16 | No of speed/ forward gears4 Nos Speeds(4F+ 1R) |
| 17 | Type of Steering Manual / Power |
| 18 | Speed Governors Shall be Fitted |
| 19 | Pay Load 800KG to 1000KG |
| 20 | Tipper body length2100 mm-2200mm, Mild steel |
| 21 | Tipper body Width1400 mm -1500mm, Mild steel |
| 22 | Tipper body Height 750mm- 950 mm, Mild steel |
| 23 | Side portion (LH &RH)& reardoors Sheet thickness2 mm, Mild steel |
| 24 | Tipper body top sheet includingframe sheet thickness1.6mm, Mild steel |
| 25 | Tipper Body Top Lid Sheetthickness1.2mm, Mild steel |
| 26 | Tipper Container Tipper Contajner should be abricated with two doors on the rear side and four doors on four top corners of the containers with hinges and locking system. A partition should be provided on the middle of container along the vertical lenqth of the body. |
| 27 | Tipper Body Top Lid main Sheetthickness 75x40x6mm |
| 28 | Hydraulic cylinder make Reputed Make |
| 29 | Hydraulic system driven Main Engine |
| 30 | Pump MakeAs per IS standard |
| 31 | Painting Should be painted with one coat ofAnti-corrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistance for weatherizing and breakage. The color shade should be as per norms. |
| 32 | Lettering To be carried out as directed by Deptofficers |
| 33 | Tipper body rear door Shall be with necessary lockinq facility. |
| 34 | Side safety guard Shall be provided as per RTOrequirement |
| 35 | Additional conditions Vehicle with fuel sensor and GPS tracking. |
| 36 | Warranty Distance/Year 25000Km/12 months whichever is earlier. |
| 37 | For thefirstoneyeartheoperationandMaintenancecostperLCV shall be theresponsibility of thesupplier. |
| 38 | Light Commercial Vehicleincluding Gst18% |
