Tender For Supply Of Frp Tanks-- 1 FRP TankApplication at site: Acid Measuring Tank /Alkali Measuring Tank Concentration of Acid: 40% Concentration of Alkali / Caustic Soda Lye:60% Max Operating temperature: 60°C Position at site (CPU Unloading Area/ETP/DM Injection): Over ground / In vertical position at foundation Capacity: 1.24KI Size: Ø 1100 mm x 1300mm length Standard: BS4994 MOC: FRP with superior vinyl ester resin (3 layer structure) Wall Thickness: Shell-8mm FRP; Bottom Thickness - 10mm FRP, Top Thickness - 8mm FRP Type: Cylindrical, Vertical, Fully supported flat legs in bottom, Lifting hooks, Anchor lugs, One no. flanged manhole as per tank dia with cover having standard thickness of neck and Cover, One No. Ø 100mm nozzle having level transmitter of standard make at top, Stiffeners, SS fasteners, EPDM Gaskets Other Points for fitting of lines: 03 No. Ø 32mm nozzles with gussets (outlet, inlet, overflow), 01 No. Ø 40mm nozzle with gusset (drain), 02 No. Ø 32mm nozzle with gusset having manual level gauge of standard make Extra fitting for alkali tank:02 No. Ø 50mm nozzle for agitator and breather at top Existing Nozzle Standard: ANSI-B-16.5-150 Note: 1. Manual Level Gauge and Level transmitter of standard make for alltanks, Fume absorber for acid tank, Breather and Agitator for alkali tank along with associated pipe lines (CPVC chem Pro Schedule 80/ polymer) will be provided by firm with tank. 2. Fabrication of nozzles should be as per the existing arrangement of tank at site hence it is mandatory to visit the site before fabrication of tank. 3. Layer structure of MOC should be as per attached drawing 2 FRP TankApplication at site: Acid Measuring Tank /Alkali Measuring Tank Concentration of Acid: 40%Concentration of Alkali / Caustic Soda Lye:60% Max Operating temperature: 60°C Position at site (CPU Unloading Area/ETP/DM Injection): Over ground / In vertical position at foundation Capacity: 3000 litre Size: Ø 1500 mm x 1700mm length Standard: BS4994 MOC: FRP with superior vinyl ester resin (3 layer structure) Wall Thickness: Shell-8mm FRP; Bottom Thickness - 10mm FRP, Top Thickness - 8mm FRP Type: Cylindrical, Vertical, Fully supported flat legs in bottom, Lifting hooks, Anchor lugs, flanged manhole as per tank dia with cover having standard thickness of neck and Cover, One No. Ø 100mm nozzle having level transmitter of standard make at top, Stiffeners, SS fasteners, EPDM Gaskets Other Points for fitting of lines: 03 No. Ø 32mm nozzles with gussets (outlet, inlet, overflow), 01 No. Ø 40mm nozzle with gusset (drain), 02 No. Ø 32mm nozzle with gusset having manual level gauge of standard make Extra fitting for alkali tank:02 No. Ø 50mm nozzle for agitator and breather at top Existing Nozzle Standard:ANSI-B-16.5-150 Note: 1. Manual Level Gauge and Level transmitter of standard make for all tanks, Fume absorber for acid tank, Breather and Agitator for alkali tank along with associated (CPVC chem Pro Schedule 80/ polymer) pipe lines as per site requirement will be provided by firm with tank.2. Fabrication of nozzles should be as per the existing arrangement of tank at site hence it is mandatory to visit the site before fabrication of tank.3. Layer structure of MOC should be as per attached drawing 3 FRP TankApplication at site: Bulk Alkali / Acid Storage Tank Concentration of Alkali / Caustic Soda Lye: 60%; Concentration of Acid: 40% Max Operating temperature: 60°C Position at site (DM Plant): Horizontal position at foundation Capacity: 27 KI; Size: Ø 2400 mm x 5964 mm length Standard: BS 4994 MOC: FRP with superior vinyl ester resin 3 layer structure Wall Thickness: Shell- 16 mm FRP; Bottom Thickness - 16mm FRP, Top Thickness - 12 mm FRP Type: Torispherical, Horizontal, Lifting hooks, Anchor lugs, 01 no. flanged manhole with cover having standard thickness of neck or as per drawing attached, one no. Davit Type manhole having standard thickness of neck, Anchor lugs, Total no. of nozzle with Gussets (Minimum 09 Nos and as required) its location will be as per attached drawing (inlet, outlet, overflow, drain, level Transmitter, Manual Level Gauge), Stiffeners, SS fasteners, EPDM Gaskets; Existing Nozzle Standard: ANSI-B-16.5-150 Note: 1. Manual Level Gauge, breather for alkali tank, fume absorber for acid tank and Level transmitter of standard make along with associated pipe lines (CPVC chem Pro Schedule 80/ polymer)will be provided by the firm with tank. 2. Fabrication of nozzles should be as per the existing arrangement of tank at site hence it is mandatory to visit the site before fabrication of tank. 3. Layer structure of MOC should be as per attached drawing.
