Supply, Installation, Testing, Commissioning & maintenance Of Ccms Panel In Uda Area. - Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure A attached with this BSR 25.0 Sq. mm 3.5 Core 3600.00 Mtr 285.00 1026000.00 2.00 Supply and installation of spike of M.S. rod 20mm dia 3.0mtr. long for earthing of (tower/pole) drive into earth by mechanical means sturcture connection the spike with cross arm top hamper PCC pole, lattics tower to earth etc. complete as per technical specification of DISCOM. 50.00 Each 1819.00 90950.00 3.00 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR 3x 1.5 sq.mm 2500.00 Mtr 63.00 157500.00 4.00 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR 2 x 2.5 sq.mm SITC of Automatic Street Light Control system with CCMS to schedule the timing of lights (Reprogrammed based on astronomical clock or on field or through central control), ON / OFF switch ( On field or centrally). connection type Three phase 18 Kw load, operating voltage 90-415Vac per phase L-N 50 Hz, maximum load handling capacity of 8 kVA per phase, supports LED Light. 24 Hours Li-ion battery back-up for communication, 220mAh coin cell for RTC. with earthing of panel and devices and 05 years comprehensive maintenance. Protective features with auto cut and auto recovery using threshold configuration for short circuit, over voltage. CCMS system to capture the energy usage and other parameters at predetermined interval and store data for 30 days, download data in field via mobile app or mobile dash board, system protection against surges, upgrade formway on field using a communication device via WIFI / GSM and GPRS low voltage / High Voltage Trip,Overload cutoff and operating voltage. Surge Protection: CAT B (6 kV/3 kA) ● Lamp Protection: 160 - 280Vac per phase L-N, 63A relay, 32A MCBs ● Monitoring: Voltage, current, power, power factor, energy, lamp hours ● Data Storage: 7 days history, 1-year report ● Timers: Scheduled and astronomical ● Switching: Remote and onsite ● Additional Features: GPS locator, event recording for supply and relay ON/OFF. MS sheet with two coats of enamel paint, duly hinged doors operable from both side with locking arrangement mounted on angle iron frame of size 35 mm x 35 mm x 3 mm having Panel Size-3.2mm Sheet(L)-600mm*(H)-1000mm*(D)- 350mm.
