Tender For Maintenance And Repair Of Street Lights And Office Buildings In Shirdi City., shirdi-Maharashtra

Tender For Maintenance And Repair Of Street Lights And Office Buildings In Shirdi City.-2 Tubular/Iron Girder/Octya Gal/Cement Pole to be removed and deposited at N.P. Godavun. 3 Erecting tubular type poles in concrete group (excluding poles with concrete material) 4 Erecting bunch conductors and stays by filling iron girders (I section)/cement poles in concrete group (excluding poles with concrete material) 5 Erecting octagonal type poles with concrete foundation nuts and bolts (excluding poles with concrete material) 6 Erecting iron girders (I section)/cement poles in concrete group (including poles with concrete material) 7 Erecting tubular type poles in concrete group (including poles with concrete material) 8 Erecting octagonal type poles with concrete foundation nuts and bolts (excluding poles with concrete material) (with pole with material) 9 Erecting tubular type pole hit by vehicle in concrete group (with concrete material with pole) 10 Erecting octagonal type pole hit by vehicle with concrete foundation nut bolt (with concrete material with pole) 11 Cutting and repairing rusty street light pole and erecting it in concrete group (with concrete material with pole) 12 Installing octagonal street light pole bracket (with bracket) 13 Installing tubular street light pole bracket (with bracket) 14 Installing street light bracket on wall with bracket 15 Cabling street light pole FIR Box , MCB, without bus 16 Earthing street light pole (40 mm GI PIPE, GI WIRE, NUT BOLT) 17 Stud/stay installation for poles (with concrete material including poles and studs) 18 3-phase overhead overhead wire for tubes/lamps on poles 19 1-phase overhead overhead wire for tubes/lamps on poles 20 Underground cable laying, connection etc. (with three feet deep excavation with double wall corrugated pipes WDC of HDPE) 21 H.T./ L.T. Electricity poles (I section girder/cement poles/tubular) shifting. Removing from one place in good condition and re-erecting at a new place and restoring electricity supply (including electrical conductors, connections, hole fitting) 22 Shifting of octagonal poles Removing from one place in good condition and re-erecting at a new place and restoring electricity supply (including electrical conductors, connections, hole fitting) 23 Painting of old tubular, girder poles (silver paint 2 layers) 24 Increasing concrete foundation for tubular/girder poles (2 feet) 25 R.C.C. of octagonal poles in road divider Concrete foundation (with material) for erection of poles (Designing and Casting M-20 Cement Concrete foundation suitable for Conical / octagonal poles for 10 to 12 m long considering the safe scil bearing capacity at site as T/sq m , 2 m depth, including excavation , foundation nuts & bolts etc in approved manner) 26 Numbering the poles with oil paint. 27 Repairing and painting old bent I section pole / tubular pole 28 Repairing minor wiring of fan / lamp / tube in building 29 House wiring as per point 30 Installing tube in building 31 Changing cutout in panel box / Changing main switch / Changing MCB switch / Changing contactor / Changing timer switch 32 Panel box hole fitting or shifting (with 63A, 100A FUSE) 33 Repairing energy saver panel with 3 phase material 34 Repairing 30 HP starter at water supply station 35 3/5/10/30/ H at water supply station Repairing P starter 36 Starting up after minor repairs of 3/5/10/30/ H P motor at water supply station 37 Starting up after repairing high mast lamp on pole 38 Installing inverter and adequate wiring for it 39 Installing lamp/street light on pole/high mast. 40 Making cable joint. (with water proof tape material)

INR 1000 /-

INR 5000.0 /-

Refer document