Revamping And Maintenance Of Fire Fighting System-- 1 Supply, installation, testing and commissioning of pressure gauge 0-200 PSI (0 - 14 Kg) range, 3/8 BSP bottom entry, 4 dial weather proof with stainless steel internals, siphon tube and ball valve including fittings, etc. complete as required as per the technical specification. 2 Supply, installation, testing and commissioning of C class heavy duty MS pipe conforming to IS 3589 / 1239 including ms fittings like elbows, tees flanges, reducers, tapers, nuts bolts, gaskets etc. conforming to IS standards. Supports for the pipes shall be done using MS Channels / Angle Iron in walls/structures at required intervals as specified for firefighting work. Piping shall have one coat of zinc chromate primer and two coats of synthetic enamel-based paint of IS approved colour code, one coat before erection and final coat of paint shall be painted after erection. Size - 150mm Diameter 3 Supply, installation, testing and commissioning of C class heavy duty MS pipe conforming to IS 3589 / 1239 including ms fittings like elbows, tees flanges, reducers, tapers, nuts bolts, gaskets etc. conforming to IS standards. Supports for the pipes shall be done using MS Channels / Angle Iron in walls/structures at required intervals as specified for firefighting work. Piping shall have one coat of zinc chromate primer and two coats of synthetic enamel-based paint of IS approved colour code, one coat before erection and final coat of paint shall be painted after erection. Size - 100mm Diameter 4 Supply, installation, testing and commissioning of C class heavy duty MS pipe conforming to IS 3589 / 1239 including ms fittings like elbows, tees flanges, reducers, tapers, nuts bolts, gaskets etc. conforming to IS standards. Supports for the pipes shall be done using MS Channels / Angle Iron in walls/structures at required intervals as specified for firefighting work. Piping shall have one coat of zinc chromate primer and two coats of synthetic enamel-based paint of IS approved colour code, one coat before erection and final coat of paint shall be painted after erection. Size - 80mm Diameter 5 Supply, installation, testing and commissioning of C class heavy duty MS pipe conforming to IS 3589 / 1239 including ms fittings like elbows, tees flanges, reducers, tapers, nuts bolts, gaskets etc. conforming to IS standards. Supports for the pipes shall be done using MS Channels / Angle Iron in walls/structures at required intervals as specified for firefighting work. Piping shall have one coat of zinc chromate primer and two coats of synthetic enamel-based paint of IS approved colour code, one coat before erection and final coat of paint shall be painted after erection. Size - 65mm Diameter 6 Supply, installation, testing and commissioning of C class heavy duty MS pipe conforming to IS 3589 / 1239 including ms fittings like elbows, tees flanges, reducers, tapers, nuts bolts, gaskets etc. conforming to IS standards. Supports for the pipes shall be done using MS Channels / Angle Iron in walls/structures at required intervals as specified for firefighting work. Piping shall have one coat of zinc chromate primer and two coats of synthetic enamel-based paint of IS approved colour code, one coat before erection and final coat of paint shall be painted after erection. Size - 50mm Diameter 7 Supply, installation, testing and commissioning of C class heavy duty MS pipe conforming to IS 3589 / 1239 including ms fittings like elbows, tees flanges, reducers, tapers, nuts bolts, gaskets etc. conforming to IS standards. Supports for the pipes shall be done using MS Channels / Angle Iron in walls/structures at required intervals as specified for firefighting work. Piping shall have one coat of zinc chromate primer and two coats of synthetic enamel-based paint of IS approved colour code, one coat before erection and final coat of paint shall be painted after erection. Size - 40mm Diameter 8 Supply, installation, testing and commissioning of C class heavy duty MS pipe conforming to IS 3589 / 1239 including ms fittings like elbows, tees flanges, reducers, tapers, nuts bolts, gaskets etc. conforming to IS standards. Supports for the pipes shall be done using MS Channels / Angle Iron in walls/structures at required intervals as specified for firefighting work. Piping shall have one coat of zinc chromate primer and two coats of synthetic enamel-based paint of IS approved colour code, one coat before erection and final coat of paint shall be painted after erection. Size - 32mm Diameter 9 Supply, installation, testing and commissioning of C class heavy duty MS pipe conforming to IS 3589 / 1239 including ms fittings like elbows, tees flanges, reducers, tapers, nuts bolts,gaskets etc. conforming to IS standards. Supports for the pipes shall be done using MS Channels / Angle Iron in walls/structures at required intervals as specified for firefighting work. Piping shall have one coat of zinc chromate primer and two coats of synthetic enamel-based paint of IS approved colour code, one coat before erection and final coat of paint shall be painted after erection. Size -25mm Diameter 10 Supply, installation, testing and commissioning of dual plate non-return valve of following sizes conforming to IS: 5312 complete with CI body, rubber gasket, GI bolts, nuts, washers etc. as required asper the technical specification. Size - 150mm diameter 11 Supply, installation, testing and commissioning of dual plate non-return valve of following sizes conforming to IS: 5312 complete with CI body, rubber gasket, GI bolts, nuts, washers etc. as required asper the technical specification. Size 100mm diameter 12 Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron body, Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes as required as per the technical specification. 150mm diameter 13 Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron body, Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes as required as per the technical specification. 100mm diameter 14 Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron body, Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes as required as per the technical specification. 80mm diameter 15 Supply, installation, testing and commissioning of gun metal fire hydrant valve, Single head oblique type with 63 mm instantaneous outlets with female socket for hose connection and inlet side with flange suitable for 80 mm pipe flange, valve conforming to IS:5290 complete with blank cap, chain etc required as per the technical specification. 16 Supplying and fixing First-aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with up-to-date amendments, complete with the following as required as per the technical specification.a) 30 m. long 20 mm (nominal internal dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585(b) 20 mm (nominal internal) dia gun metal globe valve&nozzle.(c) Drum and brackets for fixing the equipment’s on wall.(d) Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe` 17 Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required as per the technical specification. 18 Supplying & fixing 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling as required as per the technical specification. 19 Supply, installation, testing and commissioning of hose boxes wall/pedestal type of size 750 x 250 x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per specifications. 20 Supply, installation, testing and commissioning of Fire brigade collective breaching with 4 nos .of 150mm flanged outlet connection and built in check valves complete as required as per the technical specification. 21 Supply, installation, testing and commissioning of Air release valve 25 mm dia. complete as required as per the technical specification. 22 Supply, Installation, Testing and Commissioning of 150mm dia Sprinkler alarm valve of Cast iron body and bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, GI pipe of required size, flanges, orifice plate, gasket etc. complete as required as per the technical specification. 23 Standard response, standard coverage sprinkler, pendant type sprinkler ;1/2 NPT, K -5.6, Chrome Finish; operating temperature at 68 deg.C, including cost of rosette plate complete as required as per the technical specification. 24 Standard response, standard coverage sprinkler, upright type sprinkler ;1/2” NPT, K -5.6, Chrome Finish; operating temperature at 68 deg. C. complete as required as per the technical specification. 25 Early suppression fast response sprinkler, pendant type sprinkler ;3/4 NPT, K -16.8, Chrome Finish; operating temperature at 74 deg. C. including cost of rosette plate complete as required as per the technical specification. 26 Supplying and fixing of Draw out with gun metal body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for 100 mm dia MS/GI pipe connection, conforming to IS 904 as required. (Direct Connection from the sump) 27 Supply, installation, testing and commissioning of Full way Sluice valve (above 80mm dia) cast iron, double flanged with rising stem. Each sluice valve shall be provided with wheel in exposed positions and cap top for underground valves conforming to IS 780 PN1.6 class of following sizes as required. 150mm diameter 28 Supply, installation, testing and commissioning of Full way Sluice valve (above 80mm dia) cast iron, double flanged with rising stem. Each sluice valve shall be provided with wheel in exposed positions and cap top for underground valves conforming to IS 780 PN1.6 class of following sizes as required. 100mm diameter 29 Supply, installation, testing and commissioning of heavy type nickel plated brass metal Ball Valves with Chromium plated brass balls necessary fittings of screwed end type. 20mm diameter 30 Supply, installation, testing and commissioning of water monitor conforming IS 8442 with 63 mm gun metal jet nozzle capable of delivery range 50 to 55 m, horizontal rotation of 360 deg along with accessories etc as required. 31 Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 100 mm diameter pipes 32 Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 150 mm diameter pipes 33 Supply, installation, testing and commissioning of Addressable type Smoke Detector (photoelectric cum rate of rise temperature type) complete with all accessories like base, base box, etc. to be installed under/above false ceiling, roof and concealed space, etc. interconnecting to loop cable complete as required. Shall be UL listed/ FM Approved, Complete as required as per the technical specification. 34 Supply and installation of Exit way signages, LED Exit / Egress Edge lit lights with rechargeable battery made of acrylic / aluminum, conform to IS 9581-1981, 22 SWG CRCA white powder coated housing having input voltage of 230V 50Hz, with UPS backup or of photo luminescent paint as mentioned in the specifications as required. 35 Supply and installation of FIRE DE TEC cylinder (DB) 2kg fitted with DLP valve fitted with FK-5-1-12 as per directions of the engineer at the site. 36 Supply and installation of Pressure Switch as per directions of the engineer at site. 37 Supply and installation of End of Line Adaptor as per directions of the engineer in charge 38 Supply and installation of Sensor Tube for Fire Detection Tube-UL Listed as per directions of the site in charge 39 Supply and installation of Health Monitor cum Alarm Panel as per directions of engineer at site.
