Supply And Install Modular Furniture For Various Departments At Ycmou, Nashik And Regional Centre, Pune, Nanded, Nagpur, Mumbai. , Table With Side Table (2600 X 2300):-Supplying & Placing Modular Table In Completely Knock Down Conditions With An Overall Size 2600Mm X 2300Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Have The Size 2600Mm X 1100Mm/950Mm X 750Mm Made Up Of 75Mm Thick Medium Density Fibre-Board Of General Purpose Of Is 12406 With Red Veneer Polished As Per Approved Decorative Colour. The Table Top Profile Shall Have Round Structure With Taper Edges. The Table Top Shall Be Supported On Mdf Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The 75Mm Thick Gable End Shall Be Provided At Both Side With An Overall Size 820Mm X 670Mm Of Mdf With Veneer Polished. The Gable End Shall Be Inclined As Per Table Top Constructed And Edges Shall Have Taper Structure. The Gable End Base Shall Be Made Up Of Mdf With Black Polished Having The Size 840Mm X 95Mm With 10Mm Thick. The Table Shall Be Clad With 12Mm Thick Modesty Panel. The Modesty Panel Shall Be Made Up Of Medium Density Fibre-Board With An Overall Size 2290Mm X 670Mm. Modesty Panel Shall Have Round Profile According To Table Top Structure And Shall Be Polished With Leather, It Shall Have An Outer Modesty Panel For Aesthetically Design Made Up Of Mdf Polished With Red Veneer Having The Size 1600Mm X 370Mm With 12Mm Thick. The Edges Shall Be Taper As Per Approved Design. A Leather Base 6Mm Thick Writing Pad Shall Be Provided With An Overall Size 1100Mm/900Mm X 400Mm. The Side Storage Unit Shall Be Provided With The Top Size Of 1200Mm X 600Mm X 750Mm Made Up Of Mdf Board With Veneer. Storage Top And Skirting Shall Be 25Mm Thick, Shutter, Facia, Adjustment Shelf And Divider Shall Be 18Mm Thick And Bottom Shall Be 9Mm Thick Made Up Of Mdf Board Of Is 12406. Storage Have 4 Nos. Drawers Having Size 735Mm X 190Mm & 735Mm X 105Mm Shall Be Operated With The Assistance Of 400Mm Soft-Close Telescopic Channel Runs On Ball Bearing Telescopic Channel Having Load Capacity 35Kg, 1 Nos. Shelf Having Size 395Mm X 530Mm Shall Be Adjustable Type. All Drawers Shall Have Simultaneous Locking Property With The Assistance Of Central Locking Mechanism And Having Leather Base Handle. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom With Size 1160Mm X 50Mm And 520Mm X 50Mm With 25Mm Thick And Black Polished. Pedestal Shall Be Provided With An Overall Size 600Mm X 600Mm X 650Mm. The Drawer Top And Side Shall Be 25Mm Thick, Bottom, Back And Side Panels Including The Drawer Facia Is Made Up Of 18Mm Thick And Drawer Base Shall Be 9Mm Thick Made Up Of Mdf Board Of Is 12406. The Top Edges Shall Be Taper Structure. The Drawer Boxes Shall Be Operated By 400Mm Bottom Channel Sliding Roller To Smooth Operation Having Load Carrying Capacity 20 Kg. The Drawer Shall Have Centralize Locking Mechanism And Leather Base Handle. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Table With Side Table (2400 X 1700):-Supplying & Placing Modular Table In Completely Knock Down Conditions That Is To Be Assembled At Site. The Worktop Shall Have 60Mm Thick Made Up Of Medium Density Fibre-Board With Approved Veneer Polish And At Centre With Leather Covering. The Table Top Profile Shall Have Round Structure With Waterfall Edges. The Table Top Shall Be Supported On Mdf Board Based Capsule Shape Box One Side In Pu Finish & Duly Deco Painted. The End Wall Of The Table On The Other Side Shall Be Topped By 1D+1S Pedestal 350Lx600dx700ht In 18Mm Thick Mdf Board Based & Complete Body, Fascia, Shutter, Internal Box & In Moulded Construction With Full Round Post Forming Edges And Duly Deco Painted. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Medium Density Fibre-Board In Pu Finish. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Side Unit For Storage Purpose E With Curved Shaped Door . The Drawer Shall Be Operated With Finger Groove Handle And Easily Close & Open With The Assistance Of Sliding Channels To Enable Smooth Operation And Sliding Rail Track And Concealed Crank Hinge. Storage External Body, Drawer Fascia & Shutter In Mdf Veneer Finish, Sides Shall Be Made Up Of Mdf Base Board With Veneer Polish And Top, Bottom, Skirting, & Internal Partition, Drawer Box In 18Mm Mdf Based In Pu Paint Finish. Storage To Have Lock & Wireless Charger. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. The Complete Structure Shall Be Supplied With Approved Veneer Laminate, Pu Polish And Deco Painted. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Table With Side Table (2100 X 1800):-Supplying & Placing Modular Table In Completely Knock Down Conditions With An Overall Size 2100Mm X 1800Mm X 750Mm That Is To Be Assembled At Site. The Top Shall Have The Size 1900Mm X 900Mm Made Up Of 45Mm Thick Mdf Venner . The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported On 75Mm Peg Mounted Over Side Storage Unit And Fixed Pedestal. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 45Mm Thick Profile Shall Be In Linear Shape . The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 1800Mm X 510Mm X 625Mm. The Side Unit Shall Be Made Up Top And Side 45Mm Thick And Drawer Base 9Mm Thick & Other Parts 18Mm Thick Like Shutter, Back, Facia, Etc. It Shall Have 3 Drawer And 2 Sliding Shutter. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Hanging Pedestal Shall Be Provided With An Overall Size 455Mm X 685Mm X 485Mm. The Pedestal Shall Be Made Up Of Pedestal Side, Back, Facia Shall Be 18Mm Thick & Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 2 Nos. Of Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Sliding Channels To Enable Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Table With Side Table (2100 X 1800):-Supplying & Placing Modular Table In Completely Knock Down Conditions With An Overall Size 2100Mm X 1800Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Have The Size 2200Mm X 950 Mm X 76Mm Thick Made Up Of Medium Density Fibre-Board With Approved Veneer Laminate And Pu Polish Accordingly. The Table Top Profile Shall Be In Rectangle Shape With Round Corners And Full Round Post Forming Edges. The Table Top Shall Be Supported On Mdf Board Based Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 76Mm Thick Medium Density Fibre-Board And Profile Shall Be In Moulded Construction With Full Round Post Forming Edges And Duly Deco Painted. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Medium Density Fibre-Board In Linear Shape With Appropriate Pvc Edge Banding And Veneer Laminate. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 1900Mm X 500Mm X 600Mm. It Shall Have 2 Nos. Of Drawer, 1 Nos. Of Filling Space With Door And 1 Nos Of Open Space . The Drawer Shall Be Operated With Profile Handle And Easily Close & Open With The Assistance Of Sliding Channels To Enable Smooth Operation And Sliding Rail Track And Concealed Crank Hinge. Drawer Facai, Sides And All Other Shall Be Made In 18Mm Thick And Drawer Base Shall Be 9Mm Thick. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. The Complete Structure Shall Be Supplied With Approved Veneer Laminate, Pu Polish And Deco Painted. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Table With Side Table (1500 X 750):-Supplying & Placing Executive Table With Credenza Unit In Completely Knock Down Conditions With An Overall Size 1500 Mm X 1800Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Have Made Up Of 25Mm Thick Pre-Laminated Mdf Board With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20M With 1.6Mm Thick Duly Powder Coated. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Mdf Board In Linear Shape With Appropriate Pvc Edge Banding. The Table Understructure Shall Consist Of Crca Rectangle Pipe Leg (Loop Leg) And (U-Type Leg) Having Cross-Section Area 40Mm X 10Mm And 95Mm X 25Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Credenza Unit For Storage Purpose With An Overall Size 1800Mm X 580Mm X 430Mm. It Should Be Made Up Of Pre-Laminated Mdf Board Of Grade Ii Of Is 12823 With Drawer Base 9Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Facia, Side Panel Etc. It Shall Have 3 Drawer And 1 Sliding Shutter Which Is Operated On Ball Bearing Channel To Enable Smooth Operation, Ss Handle And Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Credenza Unit Shall Be Mounted On Crca Rectangle Pipe Frame Leg Having Cross-Section Area 40Mm X 10Mm With 1.5Mm Thick. The Complete Metal Parts Shall Be Duly Powder Coated To The Thickness 50-60? Dry Film Thickness. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Table With Side Table (1500 X 750):-Supplying & Placing Executive Table With Credenza Unit In Completely Knock Down Conditions With An Overall Size 1350Mm X 1500Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Have Made Up Of 25Mm Thick Pre-Laminated Mdf Board Of . With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20M With 1.6Mm Thick Duly Powder Coated. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Board In Linear Shape With Appropriate Pvc Edge Banding. The Table Understructure Shall Consist Of Crca Rectangle Pipe Leg (Loop Leg) And (U-Type Leg) Having Cross-Section Area 40Mm X 10Mm And 60Mm X 25Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Credenza Unit For Storage Purpose With An Overall Size 1500Mm X 500Mm X 430Mm. It Should Be Made Up Of Pre-Laminated Board Of . With Drawer Base 9Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Facia, Side Panel Etc. It Shall Have 3 Drawer And 1 Sliding Shutter Which Is Operated On Ball Bearing Channel To Enable Smooth Operation, Ss Handle And Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Credenza Unit Shall Be Mounted On Crca Rectangle Pipe Frame Leg Having Cross-Section Area 40Mm X 10Mm With 1.5Mm Thick. The Complete Metal Parts Shall Be Duly Powder Coated To The Thickness 50-60? Dry Film Thickness. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Table With Side Table (2400 X 1700):-Supplying & Placing Executive Table With Credenza Unit In Completely Knock Down Conditions With An Overall Size 2400 Mm X 1700Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Have Made Up Of 25Mm Thick Pre-Laminated Mdf Board With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20M With 1.6Mm Thick Duly Powder Coated. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Mdf Board In Linear Shape With Appropriate Pvc Edge Banding. The Table Understructure Shall Consist Of Crca Rectangle Pipe Leg (Loop Leg) And (U-Type Leg) Having Cross-Section Area 40Mm X 10Mm And 95Mm X 25Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Credenza Unit For Storage Purpose With An Overall Size 1800Mm X 580Mm X 430Mm. It Should Be Made Up Of Pre-Laminated Mdf Board Of Grade Ii Of Is 12823 With Drawer Base 9Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Facia, Side Panel Etc. It Shall Have 3 Drawer And 1 Sliding Shutter Which Is Operated On Ball Bearing Channel To Enable Smooth Operation, Ss Handle And Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Credenza Unit Shall Be Mounted On Crca Rectangle Pipe Frame Leg Having Cross-Section Area 40Mm X 10Mm With 1.5Mm Thick. The Complete Metal Parts Shall Be Duly Powder Coated To The Thickness 50-60? Dry Film Thickness. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Table With Side Table (3000 X 750):-Supplying & Placing Executive Table With Credenza Unit In Completely Knock Down Conditions With An Overall Size 3000 Mm X 2100 Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Have Made Up Of 25Mm Thick Pre-Laminated Mdf Board With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20M With 1.6Mm Thick Duly Powder Coated. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Mdf Board In Linear Shape With Appropriate Pvc Edge Banding. The Table Understructure Shall Consist Of Crca Rectangle Pipe Leg (Loop Leg) And (U-Type Leg) Having Cross-Section Area 40Mm X 10Mm And 95Mm X 25Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Credenza Unit For Storage Purpose With An Overall Size 1800Mm X 580Mm X 430Mm. It Should Be Made Up Of Pre-Laminated Mdf Board Of Grade Ii Of Is 12823 With Drawer Base 9Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Facia, Side Panel Etc. It Shall Have 3 Drawer And 1 Sliding Shutter Which Is Operated On Ball Bearing Channel To Enable Smooth Operation, Ss Handle And Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Credenza Unit Shall Be Mounted On Crca Rectangle Pipe Frame Leg Having Cross-Section Area 40Mm X 10Mm With 1.5Mm Thick. The Complete Metal Parts Shall Be Duly Powder Coated To The Thickness 50-60? Dry Film Thickness. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. , Conference Table (4200 X 1200):-Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size 4200Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix, Dowels, Pins And Brackets. The Worktop Shall Have The Combination Of Mdfand Veneer . The Hall Be Made Up Of 43 Mm Thick Mdf Veneer With Deco Matt Finish. The Table Top Profile Shall Be Boat Like Shape With Round Corners. . Single Sided Flip-Up Box Should Be Enclosed At Table Top That Houses Video, Audio, Data And Power Connection Discretely. Wire Carrier Shall Be Provided Below The Table Top For Power Connection Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. The Table Shall Be Supported On Gable End. The End Wall Of The Table On The Side And Mid Shall Be Topped By Gable End. It Should Be Made Up Of 36Mm Thick Mdf Veneer Board And Profile Shall Be In Linear Shape The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick . There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Conference Table (4200 X 1200):-Supplying & Placing Reception Table In Completely Knock Down Conditions With An Overall Size 4200 Mm X 820Mm X 1000Mm That Is To Be Assembled At Site. The Top Shall Have Made Up Of 49Mm Thick Pre-Laminated Mdf Board Of . With Approved Laminate And Finish As Per Approved Shade. The Upper Top Shall Have 49Mm Thick. The Top Profile Shall Be In Rectangle Shape With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Side Edges Shall Be Covered With Die Casted Aluminium Profile. The Table Top And Upper Top Shall Be Supported On Particle Board Base Strip. The Table Shall Have A Front Panel 49Mm Thick Pre-Laminated Mdf Board. A Wire Manager Cap Shall Be Provided On The Top Of The Table For Power Connection. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Shall Be Made Up Of 49Mm Thick Pre-Laminated Mdf Board And Profile Shall Be In Linear Shape With One Clipped Corner And Covered By Aluminium Profile. There Shall Be Buffers Provided To Avoid The Scratches On The Floor. The Table Shall Be Clad With 49Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 49Mm Thick Pre-Laminated Mdf Board In Linear Shape With Appropriate Pvc Edge Banding And Covered By Aluminum Profile Connected With Both End. , Conference Table (3000 X 1200):-Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size 3000Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix, Dowels, Pins And Brackets. The Worktop Shall Have The Combination Of Mdfand Laminate . The Hall Be Made Up Of 43 Mm Thick Mdf Laminate With Deco Matt Finish. The Table Top Profile Shall Be Boat Like Shape With Round Corners. . Single Sided Flip-Up Box Should Be Enclosed At Table Top That Houses Video, Audio, Data And Power Connection Discretely. Wire Carrier Shall Be Provided Below The Table Top For Power Connection Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. The Table Shall Be Supported On Gable End. The End Wall Of The Table On The Side And Mid Shall Be Topped By Gable End. It Should Be Made Up Of 36Mm Thick Mdf Veneer Board And Profile Shall Be In Linear Shape The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick . There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. , Lenior Work Table (3100 X 660):-Supplying & Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 3100 Mm X 660 Mm X 1200Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Top Shall Have 25Mm Thick Pre-Laminated Mdf Board With One Side Laminate Finish. The Edges Of The Top Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edgebander Machine At 200 0C. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Mdf Board Having Size 550Mm X 280Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60Mm Thick And 1200Mm Height With Framework Made Of Aluminium Alloy Extrusions. All Aluminium Parts Shall Be Pretreated And Duly Powder Coated Of 40?-60? Thick. All These Frame Work Sections Shall Be Fitted To Each Other By Fasteners Of 2Mm Thick Which Is Properly Zinc Coated For Corrosion Resistant. Raceway Shall Be Of Aluminium Of Size 118Mm Height Below The Work Top As Per Requirement For Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Curve Trims. The Trims Shall Be Made Of Aluminium Extrusions Of Size 60X19mm With 1.5Mm Thick End Caps On Joints 2 Way, 3Way & 4 Way Caps. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engineered For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cutouts Shall Be Provided On Raceways To Fix All Electrical And Data Points. The Table Top Shall Be Supported On Metal Loop Leg With Powder Coated Having Size 575Mm X 700Mm . There Shall Be Shoe Provided At The Bottom Of Loop Leg To Avoid The Scratches On The Floor. Mobile Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Mdf Board. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Normal Drawer Having Size 400Mm X 150Mm And 1 Filing Drawer Having Size 400Mm X 293Mm. The Drawer Shall Be Operated With Ss Base D-Handle And Easily Close & Open With The Assistance Of 400Mm Roller Base Bottom Channel Having Load Capacity 20Kg And 400Mm Ball Bearing Base Telescopic Channel Having Load Capacity 35Kg To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. The Pedestal Shall Be Mounted On Injection Moulded Nylon Castor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Lenior Work Table (4000 X 1200):-Supplying & Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 4000 Mm X 1260Mm X 1200 Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Top Shall Have 25Mm Thick Pre-Laminated Mdf Board With One Side Laminate Finish . The Edges Of The Top Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edgebander Machine At 200 0C. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Mdf Board Having Size 550Mm X 280Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60Mm Thick And 1200Mm Height With Framework Made Of Aluminium Alloy Extrusions. All Aluminium Parts Shall Be Pretreated And Duly Powder Coated Of 40?-60? Thick. All These Frame Work Sections Shall Be Fitted To Each Other By Fasteners Of 2Mm Thick Which Is Properly Zinc Coated For Corrosion Resistant. Raceway Shall Be Of Aluminium Of Size 118Mm Height Below The Work Top As Per Requirement For Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Curve Trims. The Trims Shall Be Made Of Aluminium Extrusions Of Size 60X19mm With 1.5Mm Thick End Caps On Joints 2 Way, 3Way & 4 Way Caps. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engineered For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cutouts Shall Be Provided On Raceways To Fix All Electrical And Data Points. The Table Top Shall Be Supported On Metal Leg With Powder Coated. Mobile Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Mdf Board . Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Normal Drawer Having Size 400Mm X 150Mm And 1 Filing Drawer Having Size 400Mm X 293Mm. The Drawer Shall Be Operated With Ss Base D-Handle And Easily Close & Open With The Assistance Of 400Mm Roller Base Bottom Channel Having Load Capacity 20Kg And 400Mm Ball Bearing Base Telescopic Channel Having Load Capacity 35Kg To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. The Pedestal Shall Be Mounted On Injection Moulded Nylon Castor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Lenior Work Table (1200 X 600):-Supplying & Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 1200 Mm X 660Mm X 1200 Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. . The Top Shall Have 25Mm Thick Pre-Laminated Mdf Board With One Side Laminate Finish . The Edges Of The Top Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edgebander Machine At 200 0C. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Mdf Board Having Size 550Mm X 280Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60Mm Thick And 1200Mm Height With Framework Made Of Aluminium Alloy Extrusions. All Aluminium Parts Shall Be Pretreated And Duly Powder Coated Of 40?-60? Thick. All These Frame Work Sections Shall Be Fitted To Each Other By Fasteners Of 2Mm Thick Which Is Properly Zinc Coated For Corrosion Resistant. Raceway Shall Be Of Aluminium Of Size 118Mm Height Below The Work Top As Per Requirement For Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Curve Trims. The Trims Shall Be Made Of Aluminium Extrusions Of Size 60X19mm With 1.5Mm Thick End Caps On Joints 2 Way, 3Way & 4 Way Caps. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engineered For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cutouts Shall Be Provided On Raceways To Fix All Electrical And Data Points. The Table Top Shall Be Supported On Metal Leg With Powder Coated . . Mobile Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Mdf Board . Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Normal Drawer Having Size 400Mm X 150Mm And 1 Filing Drawer Having Size 400Mm X 293Mm. The Drawer Shall Be Operated With Ss Base D-Handle And Easily Close & Open With The Assistance Of 400Mm Roller Base Bottom Channel Having Load Capacity 20Kg And 400Mm Ball Bearing Base Telescopic Channel Having Load Capacity 35Kg To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. The Pedestal Shall Be Mounted On Injection Moulded Nylon Castor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Lenior Work Table (1000 X 600):-Supplying & Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 1000 Mm X 660Mm X 1200 Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Top Shall Have 25Mm Thick Pre-Laminated Mdf Board With One Side Laminate Finish. The Edges Of The Top Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edgebander Machine At 200 0C. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Mdf Board Having Size 550Mm X 280Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60Mm Thick And 1200Mm Height With Framework Made Of Aluminium Alloy Extrusions. All Aluminium Parts Shall Be Pretreated And Duly Powder Coated Of 40?-60? Thick. All These Frame Work Sections Shall Be Fitted To Each Other By Fasteners Of 2Mm Thick Which Is Properly Zinc Coated For Corrosion Resistant. Raceway Shall Be Of Aluminium Of Size 118Mm Height Below The Work Top As Per Requirement For Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Curve Trims. The Trims Shall Be Made Of Aluminium Extrusions Of Size 60X19mm With 1.5Mm Thick End Caps On Joints 2 Way, 3Way & 4 Way Caps. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engineered For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cutouts Shall Be Provided On Raceways To Fix All Electrical And Data Points. The Table Top Shall Be Supported On Metal Leg With Powder Coated. Mobile Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Mdf Board. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Normal Drawer Having Size 400Mm X 150Mm And 1 Filing Drawer Having Size 400Mm X 293Mm. The Drawer Shall Be Operated With Ss Base D-Handle And Easily Close & Open With The Assistance Of 400Mm Roller Base Bottom Channel Having Load Capacity 20Kg And 400Mm Ball Bearing Base Telescopic Channel Having Load Capacity 35Kg To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. The Pedestal Shall Be Mounted On Injection Moulded Nylon Castor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Lenior Work Table (900 X 600):-Supplying & Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 900 Mm X 580 Mm X 1200Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of Back To Back 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Sharing Base Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Top Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And The Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In Front Side Of User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions (Pre-Treated) And Duly Powder Coated With 40-60? Thick. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With End Caps On Joints 2 Ways, 3 Ways & 4 Ways (L-Cover For Corner, T-Cover For Middle Section Wherever Required). The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm(H) X 60Mm(D) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board (With Fabric) Provided At Front Of The User. Laminated Bottom Tile Shall Be Situated Below The Work Top. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Work Station For 4 (3360 X 3360):-Supplying & Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 3360 Mm X 3360Mm X 1350-1050Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Top Shall Have 25Mm Thick Pre-Laminated Mdf Board With One Side Laminate Finish. The Edges Of The Top Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edgebander Machine At 200 0C. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Mdf Board Having Size 550Mm X 280Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60Mm Thick And 1200Mm Height With Framework Made Of Aluminium Alloy Extrusions. All Aluminium Parts Shall Be Pretreated And Duly Powder Coated Of 40?-60? Thick. All These Frame Work Sections Shall Be Fitted To Each Other By Fasteners Of 2Mm Thick Which Is Properly Zinc Coated For Corrosion Resistant. Raceway Shall Be Of Aluminium Of Size 118Mm Height Below The Work Top As Per Requirement For Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Curve Trims. The Trims Shall Be Made Of Aluminium Extrusions Of Size 60X19mm With 1.5Mm Thick End Caps On Joints 2 Way, 3Way & 4 Way Caps. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engineered For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cutouts Shall Be Provided On Raceways To Fix All Electrical And Data Points. The Table Top Shall Be Supported On Metal Leg With Powder Coated. Mobile Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Mdf Board. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Normal Drawer Having Size 400Mm X 150Mm And 1 Filing Drawer Having Size 400Mm X 293Mm. The Drawer Shall Be Operated With Ss Base D-Handle And Easily Close & Open With The Assistance Of 400Mm Roller Base Bottom Channel Having Load Capacity 20Kg And 400Mm Ball Bearing Base Telescopic Channel Having Load Capacity 35Kg To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. The Pedestal Shall Be Mounted On Injection Moulded Nylon Castor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Reception Table (1600 X 700):-Supplying & Placing Computer Desk Of Size 1600Mm(W) X 700Mm(D) X 750Mm(H). It Should Have Work Top Made Up Of 25Mm Thick Pre-Laminated Mdf Board Of . With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape And The Edges Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Mdf Board Connected With Both End. At One Side A Fixed Pedestal Shall Be Provided With 3 Drawer. The Drawer Shall Be Operated On Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Be Operated With Al Die Cast Handle With Central Locking Mechanism In Which All The Drawers Shall Be Locked With Single Key. Drawer Facai, Sides And All Other Shall Be Made In 18Mm Thick Pre-Laminated Mdf Board With Appropriate Edge Banding And Drawer Base Shall Be 9Mm Thick. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding Skirting Shall Be Provided At Bottom Of The Pedestal At Both Sides. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Reception Table (3000 X 700):-Supplying & Placing Reception Table In Completely Knock Down Conditions With An Overall Size 3000 Mm X 820Mm X 1000Mm That Is To Be Assembled At Site. The Top Shall Have Made Up Of 49Mm Thick Pre-Laminated Mdf Board Of . With Approved Laminate And Finish As Per Approved Shade. The Upper Top Shall Have 49Mm Thick. The Top Profile Shall Be In Rectangle Shape With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Side Edges Shall Be Covered With Die Casted Aluminium Profile. The Table Top And Upper Top Shall Be Supported On Particle Board Base Strip. The Table Shall Have A Front Panel 49Mm Thick Pre-Laminated Mdf Board. A Wire Manager Cap Shall Be Provided On The Top Of The Table For Power Connection. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Shall Be Made Up Of 49Mm Thick Pre-Laminated Mdf Board And Profile Shall Be In Linear Shape With One Clipped Corner And Covered By Aluminium Profile. There Shall Be Buffers Provided To Avoid The Scratches On The Floor. The Table Shall Be Clad With 49Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 49Mm Thick Pre-Laminated Mdf Board In Linear Shape With Appropriate Pvc Edge Banding And Covered By Aluminum Profile Connected With Both End. , Discussion Table (900 Dia):-Supplying & Placing Discussion Table In Completely Knock Down Conditions With An Overall Size Dia. 900Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Mdf With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Circular Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Shall Be Supported On Ms Powder Coated Rectangle Pipe Frame Having Cross-Section Area 50Mm X 25Mm With 1.6Mm Thick. The Table Understructure Shall Have 3 Nos. Chrome Plated Reducing Leg. There Shall Shoe Provided At The Base To Avoid Scratches On The Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Work Table (1200 X 600):-Supplying & Placing Modular Table In Completely Knock Down Conditions With An Overall Size 1200Mm X 600Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Worktop Shall Be Made Up Of 25Mm Thick Particle Board With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 550Mm X 280Mm. The Trey Shall Be Operated On Keyboard Channel. The Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 650Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Cabin Chairs:-Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (30+25)Mm Thick Having Density (40 & 32)Kg/M³ And The Back Shall Be Made Of (15+6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 30Mm Thick Having Density 32Kg/M³. The Same Shall Be Upholstered With Leatherite Tapestry 1Mm Thick And 535 Gsm.. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support & Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Cushion Arm With Leatherite Covering Top Completely Joint With Seat And Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism Having Upright Locking And Tilt Tension Adjustment With Anti-Shock Feature Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 80Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Shall Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 490±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 610±10 Mm(W) X 790±10 Mm(H) From Seat & From Back 890Ht. Overall Height Shall Be = 1230±10 Mm, Overall Width = 740±10 Mm Depth = 850±10Mm. Seat Ht 500Mm From Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Cabin Chairs:-Providing And Supplying High Back Chair With Ergonomic Design. The Seat And Back Shall Be Made Up Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 40Kg/M³ In Seat And (30+25)Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine With Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminium Arm With Cushion Top And Leatherite Upholstery. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standard. The Pedestal Should Have Five Legged Ms Crca Chrome Plated Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 480±10 Mm(D) X 550±10 Mm(W) And Back Size Shall Be 530±10 Mm(W) X 700±10 Mm(H) From Seat. Overall Height Shall Be = 1110±10 Mm, Overall Depth = 660±10 Mm & Overall Width = 645±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Cabin Chairs:-Providing And Supplying High Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ Upholstered With Fabric Tapestry. The Back Shall Be Made Of Two Piece Injection Moulded Polypropylene Net Cover Upholstered With Breathable Mesh Tapestry. The Base Of The Seat Shall Be Supplied With Polypropylene Cover And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support As Well As Head Support. The Chair Armrest Shall Be Made Of Aluminium With Polyurethane Arm Completely Joint With Back. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism Having Four Position Locking And Tilt Tension Adjustment With Anti-Shock Feature. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 120Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Aluminium Die Casted Having Pitch Circle Dia. 700Mm And Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chairs Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 540±10 Mm (D) X 535±10 Mm (W) And Back Size Shall Be 480±10 Mm (W) X 740±10 Mm (H) From Seat. Overall Height Shall Be = 1120±10 Mm, Base Width/ Depth = 760±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Conference Chairs:-Providing And Supplying High Back Chair With Ergonomic Design. The Seat And Back Shall Be Made Up Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 40Kg/M³ In Seat And (30+25)Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine With Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminium Arm With Cushion Top And Leatherite Upholstery. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standard. The Pedestal Should Have Five Legged Ms Crca Chrome Plated Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 480±10 Mm(D) X 550±10 Mm(W) And Back Size Shall Be 530±10 Mm(W) X 700±10 Mm(H) From Seat. Overall Height Shall Be = 1110±10 Mm, Overall Depth = 660±10 Mm & Overall Width = 645±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Visitors Chairs:-Providing And Supplying A Visitor Chair With Ergonomic Design For User Comfort & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 40Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Back Support. The Chair Shall Be Supplied With Aluminium Arm With Cushion Top. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms Crca Chrome Plated Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 475±10 Mm(D) X 550±10 Mm(W) And Back Size Shall Be 530±10 Mm(W) X 500±10 Mm(H) From Seat. Overall Height Shall Be = 960±10 Mm, Overall Depth = 660±10 Mm & Overall Width = 610±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Visitors Chairs:-Providing And Supplying A Visitor Chair With Ergonomic Design For User Comfort & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 40Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Back Support. The Chair Shall Be Supplied With Aluminium Arm With Cushion Top. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms Crca Chrome Plated Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 475±10 Mm(D) X 550±10 Mm(W) And Back Size Shall Be 530±10 Mm(W) X 500±10 Mm(H) From Seat. Overall Height Shall Be = 960±10 Mm, Overall Depth = 660±10 Mm & Overall Width = 610±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Visitors Chairs:-Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support With The Assistance Of Cushion. The Armrest Shall Be Of Chrome Plated Frame Padded With Cushion With Leatherite Covering On Top. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Pipe Having Cross Section 40Mm X 20Mm. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Seat Size Shall Be 500±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 490±10 Mm(W) X 550±10 Mm(H) From Seat & Overall Height = 960±10 Mm, Overall Width = 600±10 Mm & Overall Depth = 670±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Visitors Chairs:-Providing And Supplying Mid Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resiliance Polyurethane Foam 40Mm Thick Having Density 40Kg/M³ With Fabric Tapestry 0.6Mm Thick And 235 Gsm And The Back Shall Be Made Of Two Piece Injection Moulded Polypropylene Net Cover Upholstered With Breathable Mesh Tapestry. The Armrest Of The Chair Shall Be Used Polypropylene Arm Completely Joint With Seat & Back. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Powder Coated With Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor.The Seat Size Shall Be 470±10 Mm(W) X 460±10 Mm(D) And Back Size Shall Be 460±10 Mm(H) From Seat & Overall Height = 865±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Staff Working Chairs:-Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ Upholstered With Fabric Tapestry. The Back Shall Be Made Of Polypropylene Net Cover Upholstered With Breathable Mesh Tapestry. The Base Of The Seat Shall Be Supplied With Polypropylene Cover And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. The Chair Shall Have Aluminium Base Black Integral Polyurethane Arm Completely Joint With Back Net Cover. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism Having Four Position Locking And Tilt Tension Adjustment With Anti-Shock Feature Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 120Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Aluminium Die Casted Having Pitch Circle Dia. 650Mm And Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chairs Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 535±10 Mm(D) X 535±10 Mm(W) And Back Size Shall Be 475±10 Mm(W) X 570±10 Mm(H) From Seat. Overall Height Shall Be = 935±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 620±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Discussion Chairs:-Providing And Supplying Lobby/Lounge Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Polyurethane Foam 40Mm Thick Having Density 40Kg/M³ With Leatherite Tapestry 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Metal Insert Ms Frame Upholstered With High Resilience Polyurethane Foam 30Mm Thick Having Density 32Kg/M³ With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Seat And Back Shall Be Arrested Together With Crca Pipe Frame Frame. The Frame Structure Shall Be Supported By Four Legs Made Up Of Ms/Crca Chrome Plated Capsule Pipe Having Size 25.4Mm With 1.6Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 465±10 Mm(D) X 465±10 Mm(W) And Back Size Shall Be 345±10 Mm(H) From Seat. Overall Height Shall Be = 775±10 Mm, Overall Width = 555±10 Mm And Overall Depth = 575±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Recliner Chairs:-Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing Recliner Chair With Electric Motorised Mechanism. The Seat Shall Be Made Of Metal Insert Ms Frame Upholstered With High Resilience Polyurethane Foam (40+40)Mm Thick Having Density (40, 32)Kg/M³ With Leatherite Tapestry And The Back Shall Be Made Of Metal Insert Ms Frame Upholstered With High Resilience Polyurethane Foam Having Density 23Kg/M³ With Leatherite Tapestry With Contoured Lumbar Support For Extra Comfort. The Seat And Back Shall Be Fixed With Metal Frame And The Armrest Shall Be Used Cushion Arm With Steel Cup Holder Withleatherite Tapestry Completely Joint With Seat . The Chair Shall Have Electric Motorised Mechanism For Tilting Adjustment Of The Back. The Seat Size Shall Be 520±10 Mm (D) X 550±10 Mm (W) And Back Size Shall Be 550±10 Mm (W) X 780±10 Mm (Ht) From Seat. Overall Height Shall Be = 1110±10 Mm, Overall Width = 910±10 & Depth = 1070±10. Depth After Reclining = 1750±10. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Leture Hall Chairs:-Providing And Supplying Student/Training Room Chair. The Seat And Back Shall Be Made Up Of 12Mm Thick Hot Pressed Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 40Kg/M³ In Seat 19Mm Thick Having Density 40Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Seat And Back Shall Be Arrested Together With Metal Pipe Frame. Writing Pad Shall Be Provided Of 18Mm Thick Plyboard. The Frame Structure Shall Be Fixed Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Round Pipe Of Dia. 15Mm With 1.5Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 460±10 Mm(D) X 415±10 Mm(W) And Back Size Shall Be 455±10 Mm(W) X 410±10 Mm(H) From Seat. Overall Height Shall Be = 840±10 Mm, Overall Depth = 715±10 Mm & Overall Width = 490±10 Mm.Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Auditorium Chairs:-Supplying & Placing Visitor Chair. The Seat And Back Shall Be Made Of Double Layered (15+6)Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Chair Shall Be Supplied With Cushion Arm With Leatherite Mounted On Metal Pipe Frame. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms Crca Chrome Plated Tubular Pipe Having Cross-Section Area 40Mm X 20Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 490±10 Mm(D) X 515±10 Mm(W) And Back Size Shall Be 520±10 Mm(W) X 530±10 Mm(H) From Seat. Overall Height Shall Be = 950±10 Mm. , Single Seater Sofa ():-Supplying And Placing Single Seater Sofa That Shall Be Constructed From Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick. The Under Structure Shall Consist Of Chrome Plated 30Mm X 15Mm Hemispherical Shape Legs. There Shall Be Ppcp Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 570±10 Mm(D) X 1500±10 Mm(W), Seat Height = 460±10 Mm, Overall Width = 1860±10 Mm, Overall Depth = 760±10 Mm & Overall Height = 760±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Two Seater Sofa (1400 X 750):-Supplying And Placing Two Seater Sofa That Shall Be Constructed From Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick. The Under Structure Shall Consist Of Chrome Plated 30Mm X 15Mm Hemispherical Shape Legs. There Shall Be Ppcp Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 570±10 Mm(D) X 1500±10 Mm(W), Seat Height = 460±10 Mm, Overall Width = 1860±10 Mm, Overall Depth = 760±10 Mm & Overall Height = 760±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Three Seater Sofa (1800 X 750):-Supplying And Placing Three Seater Sofa That Shall Be Constructed From Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick. The Under Structure Shall Consist Of Chrome Plated 30Mm X 15Mm Hemispherical Shape Legs. There Shall Be Ppcp Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 570±10 Mm(D) X 2040±10 Mm(W), Seat Height = 460±10 Mm, Overall Width = 2400±10 Mm, Overall Depth = 760±10 Mm & Overall Height = 760±10 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Low Height (750 Mm) Pu Polish 2100 Length:-Supplying & Placing Storage Back Unit In Completely Knock Down Conditions That Is To Be Assembled At Site. The Top Shall Be Made Up Of Medium Density Fibre-Board With Approved Veneer Laminate And Pu Polish Accordingly. The Panel Shall Be In Rectangle Shape And Should Be 25Mm Thick. Veneered Portion Of Work Surface Shall Be Finish With Pu Polish. The Complete Unit Shall Be Made Up Of Medium Density Fibre-Board Duly Veneer Laminate And Pu Polish. It Shall Have Door Shutter Operated With The Assistance Of Soft-Close Concealed Crank Hinge. W 2100 X D 450 X H 750 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Low Height (750 Mm) Pu Polish 2101 Length:-Supplying & Placing Storage Back Unit In Completely Knock Down Conditions That Is To Be Assembled At Site. The Top Shall Be Made Up Of Medium Density Fibre-Board With Approved Veneer Laminate And Pu Polish Accordingly. The Panel Shall Be In Rectangle Shape And Should Be 25Mm Thick. Veneered Portion Of Work Surface Shall Be Finish With Pu Polish. The Complete Unit Shall Be Made Up Of Medium Density Fibre-Board Duly Veneer Laminate And Pu Polish. It Shall Have Door Shutter Operated With The Assistance Of Soft-Close Concealed Crank Hinge. Size Shall Be W 2200 X D 450 X H 750 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Low Height (750 Mm) Pu Polish 1900 Length:-Supplying & Placing Storage Back Unit With An Overall Size 1900Mm X 450Mm X 750Mm. The Storage Shall Be Made Up Of Pre-Laminated Mdf Board Of . With Approved Laminate And Finish As Per Approved Shade. The Top Shall Be Made Up Of 25Mm Thick And Other Parts Like Side, Back, Shutter, Facia, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Be Supplied With 2 Nos. Of Shelves. Door Shutters Shall Be Provided For Opening And Closing The Storage. The Shutter Shall Be Operated With Concealed Crank Hinge And Groove Handle As Well As Proper Locking Arrangement. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Low Height (750 Mm) Pu Polish 1500 Length:-Supplying & Placing Storage Back Unit With An Overall Size 1500Mm X 450Mm X 750Mm. The Storage Shall Be Made Up Of Pre-Laminated Mdf Board Of . With Approved Laminate And Finish As Per Approved Shade. The Top Shall Be Made Up Of 25Mm Thick And Other Parts Like Side, Back, Shutter, Facia, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Be Supplied With 2 Nos. Of Shelves. Door Shutters Shall Be Provided For Opening And Closing The Storage. The Shutter Shall Be Operated With Concealed Crank Hinge And Groove Handle As Well As Proper Locking Arrangement. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Low Height (750 Mm) Pu Polish 2400 Length:-Supplying & Placing Storage Back Unit With An Overall Size 2400Mm X 450Mm X 750Mm. The Storage Shall Be Made Up Of Pre-Laminated Mdf Board Of . With Approved Laminate And Finish As Per Approved Shade. The Top Shall Be Made Up Of 25Mm Thick And Other Parts Like Side, Back, Shutter, Facia, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Be Supplied With 2 Nos. Of Shelves. Door Shutters Shall Be Provided For Opening And Closing The Storage. The Shutter Shall Be Operated With Concealed Crank Hinge And Groove Handle As Well As Proper Locking Arrangement. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Low Height (750 Mm) Pu Polish 1200 Length:-Supplying & Placing Storage Back Unit With An Overall Size 1200Mm X 450Mm X 750Mm. The Storage Shall Be Made Up Of Pre-Laminated Mdf Board Of . With Approved Laminate And Finish As Per Approved Shade. The Top Shall Be Made Up Of 25Mm Thick And Other Parts Like Side, Back, Shutter, Facia, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Be Supplied With 2 Nos. Of Shelves. Door Shutters Shall Be Provided For Opening And Closing The Storage. The Shutter Shall Be Operated With Concealed Crank Hinge And Groove Handle As Well As Proper Locking Arrangement. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Mid Height (1200 Mm) 1500 Length:-Supplying & Placing Storage Unit. It Should Be Made Up Of Pre-Laminated Mdf Board With Laminate And Finish With An Overall W 1950 X D 450 X H 1200 Mm. The Top Of The Shutter Shall Be 25Mm Thick And All Other Profile I.E. Side, Back, Shutter, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 2 Nos. Of Adjustable Shelf And 4 Nos. Of Sliding Shutters Shall Be Provided For Ease Of Opening. The Sliding Shutter Shall Be Operated On Sliding Rail Track And Ss Handle As Well As Push Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Full Height (2100 Mm) 1000 Length:-Supplying & Placing Storage Unit. It Should Be Made Up Of Pre-Laminated Mdf Board With Laminate And Finish Overall W 1000 X D 450 X H 2100 Mm. The Top Of The Shutter Shall Be 25Mm Thick And All Other Profile I.E. Side, Back, Shutter, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 2 Nos. Of Adjustable Shelf And 4 Nos. Of Sliding Shutters Shall Be Provided For Ease Of Opening. The Sliding Shutter Shall Be Operated On Sliding Rail Track And Ss Handle As Well As Push Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Full Height (2100 Mm) 750 Length:-Supplying & Placing Storage Unit. It Should Be Made Up Of Pre-Laminated Mdf Board With Laminate And Finish Overall W 750 X D 450 X H 2100 Mm. The Top Of The Shutter Shall Be 25Mm Thick And All Other Profile I.E. Side, Back, Shutter, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 2 Nos. Of Adjustable Shelf And 4 Nos. Of Sliding Shutters Shall Be Provided For Ease Of Opening. The Sliding Shutter Shall Be Operated On Sliding Rail Track And Ss Handle As Well As Push Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Single Side Single Side:-Supplying & Placing Storage Unit W 1200 X D 300 X H 2100 Mm. It Should Be Made Up Of Pre-Laminated Mdf Board With Laminate And Finish. The Top Of The Shutter Shall Be 25Mm Thick And All Other Profile I.E. Side, Back, Shutter, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 2 Nos. Of Adjustable Shelf And 4 Nos. Of Sliding Shutters Shall Be Provided For Ease Of Opening. The Sliding Shutter Shall Be Operated On Sliding Rail Track And Ss Handle As Well As Push Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. , Single Side Both Side(1200 X 600 X2100):-Supplying & Placing Storage Unit W 1200 X D 600 X H 2100 Mm. It Should Be Made Up Of Pre-Laminated Mdf Board With Laminate And Finish. The Top Of The Shutter Shall Be 25Mm Thick And All Other Profile I.E. Side, Back, Shutter, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 2 Nos. Of Adjustable Shelf And 4 Nos. Of Sliding Shutters Shall Be Provided For Ease Of Opening. The Sliding Shutter Shall Be Operated On Sliding Rail Track And Ss Handle As Well As Push Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. , Single Bed With Side Table(1950 X 900):-Dimensions W X H X D (Cm) - 900 X 930 X 1950 Primary Material - Engineered Wood Primary Material Subtype - Particle Board Storage Mechanism - Box Storage Finish Color - Brown Style - Contemporary & Modern Seat Height (Cm) - 43 Storage Included - No Material Of Bed Frame Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade, Headboard & Foot Board Provided. Thickness Of Mattresses Panel ± 1(Mm) 18, Thickness Of Bottom Panel Of Storage Box ±1 (Mm) 18, Thickness Of Front, Back And Side Panels ±2 (Mm) 18, Thickness Of Material Of Headboard ±2 (Mm) 18, Overall Height Of Headrest ±5 (Mm) 930 Length Of Headboard ±10 (Mm) 900, Thickness Of Material Of Footboard ±2 (Mm) 18, Overall Height Of Footboard ±5 (Mm) 450, Overall Length Of Footboard ±10 (Mm) 900. With Mattress. , Double Bed With Side Table():-Bed For Room The Bed’S Elegant Design Integrates Seamlessly Into Any Environment, Ensuring Patient Comfort While Maintaining An Aesthetically Pleasing Atmosphere. , King Size Bed With Side Table():-The Bed’S Elegant Design Integrates Seamlessly Into Any Environment, Ensuring Patient Comfort While Maintaining An Aesthetically Pleasing Atmosphere. Versatile Adjustments: The Bed Allows For A Variety Of Adjustable Features, Including Head And Knee Angle Adjustments, Tailored To Meet Diverse Medical And Comfort Requirements. Sturdy Construction: Built With High-Quality Materials, This Bed Guarantees Durability And Reliability, Making It Suitable For Demanding Healthcare Environments. Ergonomic Specifications: Total Length: 2,134 Mm Total Width: 1,160 Mm Total Height: Ranges From 761 To 1,141 Mm Mattress Base Height: 290 To 670 Mm Safe Working Load: The Bed Can Safely Support Up To 204 Kg, Accommodating A Wide Range Of Patients. Advanced Mobility: Equipped With 125 Mm Diameter Double-Wheel Casters Featuring A Central Locking System, This Bed Offers Smooth Movement And Secure Positio , Centre Table (Teepoy)(900 X 450):-Supplying & Placing Center Table With An Overall Size W 900 X D 450 X H 450. The Top Shall Be Made Up Of 30Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Lower Shelf Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board. The Under Structure Shall Consist Of Ss 202 Grade Shiny Chrome Finish Pipe Frame Having Cross-Section Area 30Mm X 15Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Side Table(500 X 500):-Supplying & Placing Side Table With An Overall Size W 500 X D 500 X H 450 Mm . The Top Of The Table Shall Be Made Up Of 30Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Top Profile Shall Be In Square Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Lower Top Of The Table Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board. The Under Structure Shall Have Ss 202 Grade With Shiny Chrome Finish Pipe Frame With Cross-Section Area 30Mm X 15Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Tv Unit With Study Table:-Tv Unit Providing And Installation Of Tv Unit Carcass Panel Shall Be Made Of 18 Mm Prelaminated Particle Board With Edge Banding 2 Mm Thickness On Visible Sides. Drawer Bottom Shall Be Made Of 12 Mm Thick Prelaminated Particle Board. 4 Drawer Front Shall Be Made Of 18 Mm Thick Prelaminated Particle Board With Edge Banding 2 Mm Thickness On Visible Sides. All Drawers Shall Be Fitted With Knobs.Top Shall Be Made Up Of 18Mm Partilcle Board Postform At Front Side. W 3600 X D 450 X H 750 Mm. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Accostical Panel:-Channelled Wall Panelling Of Size: 192X2400x15mm Providing And Fixing Channelled Perforated Panels Of Width 192Mm, Thickness Of 15Mm And Length 2400 Mm, Made Of A Moisture Resistant Fibre Board Substrate With A Laminated Facing As Per The Approved Shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) And A Melamine Balancing Layer On The Reverse Side. The Boards Shall Have A Special Perforation Pattern Where The Reverse Surface Has A “Helmholtz” Fluted Perforation With Consecutive 3Mm Wide Groove Followed By 13Mm Or 21Mm Of Visible Pane (G-13/ G-21). The Edges Of The Panel Shall Be “Tongue-And- Grooved” To Fix Special Clips For Installation And Seamless Visual. The Back Of The Perforated Panel Shall Have Sound Absorbing Non-Woven Soundtex Acoustical Fleece Hot Pressed To Achieve Nrc Of 0.5. For G-21 And 0.6 For G-13. (Average Value Of Absorption Co-Efficient Readings Taken At 250 Hz, 500 Hz, 1000 Hz And 2000 Hz) As Per Astm C423 And Humidity Resistance (Rh) Of 70% With Camber Limit Less Than 1Mm/1000Mm And Bow Less Than 1Mm/300Mone Metric Tonnehe Panels Shall Be Mounted On Special Aluminium Splines (Keel) Using Inside Clips Provided By Manufacturer And Approved By The Architect/ Engineer-In-Charge.Installation: An Appropriate Vapour Barrier (By Others) Shall Be Applied/Installed On The Vertical Surface Before The Installation To Properly Seal Against Entry Of Any Moisture. Vapour Barrier (By Others) Shall Be Installed As Per Manufacturer’S Recommendation. Install Wooden Batten Grid (Provided By Others) Of Section 50X50mm Or As Approved By The Architect On The Solid Wall/Partition To Provide Level And Plumb Surface For Fixing Keel. Install Keel Vertically Using Screws And Plugs At Spacing Of Not More Than 600Mm Centre-To-Centre. The First And Last Keel Should Not Be More Than 150Mm From The Ends. Trim The Tongue Of The First Bottom Panel And Install Using Headless Nail With Groove Side Upward. Subsequent Panels Are Installed With Tongue Side Downward By Engaging With Each Other Using Tongue And Groove Mechanism And Secured By Inside Clip. Continue This Process Until Required Height Is Achieved. Shorter Butt Edges Need To Be Joined Using Industrial/Wood Glue. The Keel Shall Also Be Used For Transition Of The Butt End Of Adjacent Panel At Every 7.2M. Install The Skirting (Provided By Others) Of Width 50Mm Or More As Required By The Architect/ Engineer-In-Charge. Finish Off The Edges Using Wooden Moulding Of Matching Colour (By Others). Installation Should Be Carried Out As Per Manufacturer Recommended Procedure. , Partion:-Supplying & Placing Partion In Completely Knock Down Conditions With An Overall Height Of 1200Mm That Is To Be Assembled At Site. The Partion Shall Be A Panel Based Partition System Of 60Mm Thick. The Panel On The Sides Of User Shall Be Of 1350 Height. Upper Part Of The Panels To Be Finished With Approved Laminate. Framework Shall Be Made Of Aluminum Alloy Extrusions. All Aluminum Parts Shall Be Pretreated And Duly Powder Coated Of 40?-50? Thick. All These Frame Work Sections Shall Be Fitted To Each Other By Fasteners Of 2Mm Thickness Which Is Properly Zinc Coated For Corrosion Resistant. The Trims Shall Be Made Of Aluminum Extrusions Of Size 60X19mm With 1.5Mm Thick And Should Be Covered With Die Cast End Caps On Joints, 2 Ways, 3 Ways & 4 Ways Caps As Required. Oem Must Have Bifma Test Certificate, Aiota Certificate, Valid Menmbership Of Cii, Green Guard Certificate For Same Category. , Almira(900 X 1830):-Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 900Mm (W) X 450Mm (D) X 1830Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. All Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 40-60?. , Almira(900 X 1125):-Providing, Supplying And Placing Steel Personal Locker. The Overall Size Of The Almirah Shall Be 900Mm (W) X 400Mm (D) X 1125Mm (H). The Cabinet Shall Be Supplied With 2 Nos. Of Separate Doors. Storage Shall Have 2 Nos. Of Adjustable Shelf. The Doors Shall Be Operated With Aesthetically Appealing Snap Fit Abs Plastic Handle And Concealed Crank Hinge. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Of Each Shelf Shall Be 40 Kg Maximum. Each Rack Shall Be Provided With Stiffener At Bottom For Strength. The Entire Body Panel, Shelf Shall Be Made Of High Yield Strength 0.8Mm Thick Crca Sheet Of Grade ‘D’ Confirming To Is: 513. To Protect The Ball From Kicks, Abrasion And Serve As A Decorative Moulding Skirting Shall Be Provided At The Bottom Of The Almirah. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To The Thickness 40-50? Thick. , Wardrob(1600 X 2400):-Providing & Fixing Wardrobe As Per Photograph. Wardrobe Top, Carcass & Shutter And Shelf Are Made Of 18Mm Thick Pralamianted Partical Board. 18Mm Plpb Openable Shutter. Wardrobe Shall Have Single Drawer Inside The Wardrobe With Recessed Handle, Opening Of Drawers Shall Be Very Smooth. W 1600 X D 600 X H2400 , Wardrob(900 X 2400):-Providing & Fixing Wardrobe As Per Photograph. Wardrobe Top, Carcass & Shutter And Shelf Are Made Of 18Mm Thick Pralamianted Partical Board. 18Mm Plpb Openable Shutter. Wardrobe Shall Have Single Drawer Inside The Wardrobe With Recessed Handle, Opening Of Drawers Shall Be Very Smooth. W 900 X D 600 X H2400
