}

Tender For Thinset And Interlocking Work For Setting Up Moksha Vahini In Takiya Complex - Earth Work In Excavation In Foundation, Trenches Etc. Including Dressing Of Sides And Ramming Of Bottoms, Includinggetting Out The Excavated Material, Refilling Afte, kumher-Rajasthan

Department Of Local Bodies has published Tender For Thinset And Interlocking Work For Setting Up Moksha Vahini In Takiya Complex - Earth Work In Excavation In Foundation, Trenches Etc. Including Dressing Of Sides And Ramming Of Bottoms, Includinggetting Out The Excavated Material, Refilling Afte. Submission Date for this Tender is 17-03-2025. Paver Blocking Tenders in kumher Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

48009578
Tender For Thinset And Interlocking Work For Setting Up Moksha Vahini In Takiya Complex - Earth Work In Excavation In Foundation, Trenches Etc. Including Dressing Of Sides And Ramming Of Bottoms, Includinggetting Out The Excavated Material, Refilling Afte
Open Tender
NCB
Rajasthan
Kumher
17-03-2025

Tender Details

Tender For Thinset And Interlocking Work For Setting Up Moksha Vahini In Takiya Complex - Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, includinggetting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m 2 Providing and laying in position cement concreteof specified grade excluding the cost of centringand shuttering - Allwork upto plinth level : 1:4:8(1 Cement : 4 fine/ coarse sand : 8 graded stoneaggregate 40 mm nominal size). 3 Random rubble masonry with hard stone infoundation and plinth :Cement mortar 1:6 (1cement : 6 coarse sand) 4 Brick work with FPS bricks of class designation 75in superstructure above plinth level upto twostories in all shapes and sizes in : Cement mortar1:6 (1 cement : 6 coarse sand) 5 Providing and laying in position cement concreteof specified grade excluding the cost of centringand shuttering - All work upto plinth level :1:1½:3 (1 Cement : 1½ coarse sand : 3 gradedstone aggregate 20 mm nominal size). 6 Cement plastering including T&P, scaffolding, materialand complete labour, including cost of water, curing,racking of joints etc. with 12 mm cement plaster of mix: including Providing /mixing of synthetic fiberscompulsorily complying with IS 16481:2022 of 06mm/12 mm length to be mixed @ 0.25% by weight ofCement i.e. 125 gms per 50 kg Cement up to 900 gmsper cum of Concrete/ mortar plaster of mix : 1:4 (1cement : 4 fine/ coarse sand) 7 Providing and laying damp-proof course with cementconcrete grade M-15 (1 : 2 : 4) mortar prepared with 1%solution of water-proof compound complete as perspecification . including Providing /mixing of syntheticfibers compulsorily complying with IS 16481:2022 of 06mm/12 mm length to be mixed @ 0.25% by weight ofCement i.e. 125 gms per 50 kg Cement up to 900 gmsper cum of Concrete/ mortar.50mm thick. 8 Steel work welded in built up sections/ framedwork including cutting, hoisting, fixing in positionand applying a primingcoat of approved steelprimer using structural steel etc. as required. Ingratings, frames, guard bar, ladder, railings,brackets, gates and similar works.Brick work with bricks of class designation 75 infoundation and plinth in: Cement mortar 1:6 (1cement : 6 coarse sand) 9 Providing corrugated G.S. sheet roofing includingvertical/ curved surface fixed with polymer coatedJ or L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I.limpet washers filled with white lead andincluding a coat of approved steel primer and twocoats of approved paint on overlapping of sheetscomplete upto any pitch in horizontal/ vertical orcurved surfaces) excluding the cost of purlins,rafters and trusses and including cutting to sizeand shape wherever required.0.80mm thick withzinc coating not less than 275gm/m² 10 Rolling shutter made of 80x1.25 mm machinerolled laths 11 Top cover of Rolling shutters 1.20 mm thick 12 27.5 cm long wire spring grade no 2 for rollingshutters 13 Ball bearing for rolling shutters 14 Extra for mechanical devices chain and crankedoperation for operating rolling shutters : exceeding10.00 sq.m and upto 16.80 sq.m area of door 15 40 mm thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1cement : 5 coarse sand) including pointing withcement mortar 1:2 (1 cement : 2 stone dust) withan admixture of pigment to match the shade ofstone.Red sand stone 16 Distempering with oil bound washable distemperof approved brand and manufacture to give aneven shade.New work (two or more coats) over andincluding priming coat with cement primer. 17 Providing and fixing of precast concreteinterlocking tiles of desired shape of M 30 grademanufactured from fully computerized automaticstationery hydraulic vibrio pressed machine andfully computerized automatic batching plant ofclass A1/A2 as per BS 6717:2001. The CCinterlocking paving blocks be laid on average50mm. thick bed of coarse sand and the joint is tobe filled with fine sand. Laying procedure oncompacted sub-base as defined. Complete job is tobe executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Liftsetc. complete as per specifications. Tensilesplitting strength, abrasion and braking load etc.as per BS 6717:2001, Grey cement.80mm thick 18 Providing, laying, spreading and compacting ofgranular sub-base by providing close gradedMaterial, mixing in a mechanical mix plant atOMC, carriage of mixed Material to work site,spreading in uniform layers with motor grader onprepared surface and compacting with vibratorypower roller to achieve the desired density,complete as per MoRT&H specification clause -401 including all material, labour, machinery,lighting, guarding and maintenance ofdiversion.Grading - III Material 19 Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately) :Red sand stone - exposed face fine dressed with rough backing.40 mm thick. 20 GI wire gauge 24 gauge 14 mesh of IS 1568-1970 marked 85 gauge of dia 0.56 mm

Key Value

Document Fees
INR 500 /-
EMD
INR 9940.0 /-
Tender Value
INR 4.97 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail