Tender For Relaying of Synthetic track and Renovation works at Municipal Stadium Pala, Kottayam- Civil works - Renovation of existing Infrastructures 2 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 3 15.28.1 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet 4 od347878/2023_2024 : Dismantling chain link fencing/ GI Posts of any size, including making rolls and stacking within 50 metres lead. Cost inclusive of cutting charges, labouretc all complete. 5 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 6 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 7 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 8 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 9 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 10 14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) 11 13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm 12 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 13 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 14 10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 15 10.20 : Providing and fixing bolts including nuts and washers complete. 16 od347879/2023_2024 : Providing & fixing Poly carbonate plain sheet / solid sheet 3mm or 4 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required. 17 12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 18 od219246/2024_2025 : Providing and fixing 30cm wide UPVC rain water Gutter pipe/pathy (White,brick red,royal blue,grey) of overall size 45 cm in rectangular section with clamp/brackets @ a spacing 1200mm and 2x12 gauge screws mm, necessary bolts, nuts andincluding making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/ m2 19 12.41.2 : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter 20 13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work 21 15.17.2 : Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats 22 16.83 : Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 23 od60267/2024_2025 : Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of 6mm aggregate etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.) (Based on CPWD 16.84) 24 od60283/2024_2025 : Steel work for fencing with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete(Rate based on CPWD 50.10.2) 25 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 26 16.70.1 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 4 mm 27 od68107/2024_2025 : SKF_OD 7/2022-2023 Supplying and stacking for measurement sieved red earth at site including royalty and carriage upto 5 k.m. lead,all labour charges for stacking, loading and unloading etc complete.( Based on CPWD 30.2.2 &30.2.4.3) 28 od68108/2024_2025 : SKF - OD 2/2022-2023 Supplying and stacking for measurement sieved jamuna sandat site including cost of sand andcarriage upto 5 k.m. lead,all labour charges for stacking,loading and unloading etc complete. (Based on CPWD 30.2.2 &30.2.4.3) 29 od68256/2024_2025 : DSR 30.2.4.3: Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment): Screened through sieve of I.S. designation 4.75 mm. 30 od219201/2024_2025 : Mixing red earth, jamuna sand and manure in the required proportion specified or directed by the Officer-in-charge including all cost of labour charges,hire charges of machineries etc complete.(Based on CPWD 30.2.9) 31 od68110/2024_2025 : SKF_OD 3/2022-2023 Spreading of red earth, jamuna sand and manure in required thickness as per direction of officer-in-charge including all cost of labour charges, hire charges of machineries etc complete. (cost of red earth ,jamuna sand and manure to be paid separately).( Based on CPWD 30.2.8) 32 od68111/2024_2025 : SKF_OD 10/2022-2023 Consolidation of sub grade with power road roller of 8 to 12 tonne capacity with road roller including making good the undulations etc. including all cost of labour, hire charges, fuel, oil, etc. complete.( Based on CPWD 16.1) 33 30.2.56 : Anti termite treatment of lawn area through premise 30.50% I P. one literpremisediluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)andas per direction of officer-in-charge. 34 od69692/2024_2025 : Grassing with Bermuda grass, rolling the surface with light roller make the surface smoothen and even including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing as per the Direction of Engineer in Charge. In rows 5 cm apart in both directions 35 Construction of gallery steps. 36 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 37 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 38 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 39 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 40 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 41 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 42 50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. 43 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 44 5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) 45 5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 46 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 47 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more 48 13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) 49 13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) 50 50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete 51 13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 52 10.26.3 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes 53 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 54 od217210/2024_2025 : Providing and laying of interlock concrete block pavements having thickness 60mm (M35) as per drawings and technical specification clause 1504 confirming to IS 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with CC M35( @ 0.045 m3/m) 55 Subbase Renovation 56 od347936/2023_2024 : Scarifying the existing Synthetic Track Surface and Bituminous Concrete to a depth of 50 mm and disposal of scarified material within all lifts and lead upto 1000 meters by Mechanical Means (Based on MoRTH 3.15) 57 5.2.a : Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 58 5.6.2.a : Providing and laying bituminous concrete with 80-100 TPHhot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder( NRMB)@ 5.4 per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Grading - II (13.2 mm Nominal Size) 59 Synthetic Track 60 od32899/2024_2025 : SKF_OD 5/2022-2023 Supply of full PUR , World Athletics ( formerIAAF) approved Synthetic Track Surfacing system in accordance with World Athletics standard suitable for conducting World Athletics approved international Athletic events. Total thickness of the synthetic track surfacing system shall be 14 to 15mm comprising 9.4 to 10.0 mm force reduction layer comprising 4.7mm Bottom Layer made with Black SBR granules embedded in PUR coating ,4.7mm Middle Layer(s): Black SBR granules embedded in PUR coating and final resilient wearing layer of granular texture, red-brown. Full PUR coating with EPDM granules embedded 5.0 mm. In high stress areas thickness should be as per World Athletics requirement. Laying and installation according to World Athletics specifications and approved methodology and drawings including provisions of installation of sleeves for throwing events, inlay equipment for pole vault, long &triple jump and steeple chase. This rate also include lane marking and class 2 certification 61 od347953/2023_2024 : Supply and Filling Fine Sand of approved quality in Long Jump Pit as per the direction of officer in charge. (Based on DSR 30.2.2, 30.2.4.3, 30.2.8) 62 Track Equipments 63 od347960/2023_2024 : Supply and installation of the WA Certified Competition Aluminium Removable Track:kerb , installed as per WA specification and as directed by the engineer-in-charge. 64 od68239/2024_2025 : Supply and installation of the WA Certified Competition takeoff tray, installed as per WA specification and as directed by the engineer-in-charge. 65 od68233/2024_2025 : Supply and installation of the WA Certified Competition Dummy board with Synthetic top, installed as per WA specification and as directed by the engineer-in-charge. 66 od68234/2024_2025 : Supply and installation of the WA Certified Competition takeoff wooden board installed as per WA specification and as directed by the engineer-in-charge. 67 Cricket Pitch 68 2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil 69 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 70 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 71 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 72 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 73 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 74 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 75 5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 76 od66379/2024_2025 : Steel work for fencing with GI pipes including cutting , hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolting with special shaped washers etc. 77 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 78 od66407/2024_2025 : Supply and Installation of approved quality 2mm thick UV Stabilized Nylon net of Mesh size not greater than 50mm in existing GI poles including all charges as per the direction of Engineer in charge. 79 od61698/2024_2025 : Providing & laying vacuum dewatered flooring using M20 grade concrete 1:11/2:3 (1cement :11/5 coarse sand : 3 graded stone aggregate 20mm nominal size)including vibrating concrete by using screed vibrator and vacuum dewatering using approved make equipment and finishing the top surface to required level and grade using power trowels of standard make.(Base on CPWD 16.75 & 5.1.2) 80 od61662/2024_2025 : Supply and installation of artificial Cricket Turf (Brand: Bellinturf/BellinturfW, Royal/equivalent) having loop Pile Type of 5500 Dtex, Pile Height of 15 MM +/- 1 MM, 3/16” , Stitch Rate of 33/ 10 cm +/-3%, Density: 69300/sq. m+/-3%, Backing: PP Cloth + Mesh + SBR. The rate is inclusive of installation using high bond adhesive of Fevicol SR 998/equivalent, marking of wicket area etc as per the drawing and methodology as per the direction of engineer in charge. 81 od61665/2024_2025 : Supply of standard size cricket wicket set including wooden stumps,wooden bails with heavy duty iron spring base stand for net practice. 82 Sprinkler works 83 od55783/2024_2025 : SKOD_ SP_2023 :POP UP SPRINKLERS Supply, installation testing and commissioning of Popup sprinkler full and semi/part circle filtration of radiusthrow minimum 15 m up to 23 m & flow of 0.09-0.61lps. at an operative pressure of 2.5-4.5kg/cm.sq.,The Sprinkler is Gear driven rotary type with slip clutch mechanism and heavy duty retract spring. memory arc, nonstrippable and brass reinforced nozzle turret, left right both side arc adjustment, Memory arctechnology, part and full circle in same sprinkler.The sprinkler shall have Multi-function, pressure-activated wiper seal for low pressure opreration. The sprinkler shall have Internal Seal-A-Matic device which prevents low head drainage (up to 3.1 m) hence puddling & erosion. The body of sprinkler is of non-corrodible, heavy duty, ABS plastic. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. 84 od55784/2024_2025 : SKOD_ SP_2023 :Supply, Fixing &Commissioning of Sod Cup Kit allows users to grow turf on the cap of the rotors. This allows for an early invisible installation for applications such as sports fields. The rugged construction of the Cup Kit provides maximum durability while maintaining maximum player safety. Integral pullup slot. Easy arc adjustment after installation through inner cup. Drain holes top romote healthy turf growth. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 85 od55785/2024_2025 : SKOD_ SP_2023 :Supply, Fixing &Commissioning of1 Pop up Connecting Swing joint Assembly. The tubing shall be made of UPVC, a working pressure of 5.5kg/cm2 at 43 degree celcius and a surge pressure of 16.6kg/cm2. The fittings shall be made of UV resistant thermoplastic. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 86 od217674/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning of HDPE services saddle of varying size with pressure rating of PN10. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 87 od217675/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning of PVC Ball Valve, security pivot to maintain lever in space, double water tight joint, direct injection stem, non mechanical, with a base which permits maximum penetration into the valve of size 63mm with pressure rating PN10. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 88 od55786/2024_2025 : SKOD_ SP_2023 : Supply, Fixing & Commissioning of Double acting 1/2" Air release valve, made of HDPE material. The Air release valve shall be capable of both releasing and admitting air from and into the line. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 89 od55787/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning of 12" Rectangular Valve Box made of HDPE ,or higher grade material with green lid and corrugated structure with unique shovel access slot and bolt hole knock out. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 90 od55788/2024_2025 : SKOD_ SP_2023 : Supply, fixing & Commissioning of 6" Round box of HDPE or higher grade material with green lid and corrugated structure with unique shovel access slot and bolt hole knock out.Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. 91 od55789/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning of 1.5'' quick coupling valve made up of solid brass with locking cover corrosion resistant and SS spring. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 92 od217677/2024_2025 : SKOD_ SP_2023 : Supply, Fixing & Commissioning of Brass key threads into top of quick coupling valve to provide water access. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 93 od217679/2024_2025 : SKOD_ SP_2023 :PUMPING UNITSupply, Fixing & Commissioning ofMonoblock or open well submercible pumpset of having discharge and head of design flow . Duty of Pump : min 4 lps / Each Pump;Pressure Head Range = min 50 - 55 RM. No of pumps: 1 working + 0 standby. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete. 94 od217680/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning ofControl panel suitable for pump set having panel box made of CRCA sheet of 2mm thickness and fixed along withDOL starter, start/ stop push buttons, Ammeter, Single phase preventor, Voltmeter, Indicating lamps, MCB, Dry level guard sensor with control cable,etc. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 95 od217681/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning ofSuction, Delivery & Header Pipes of size suitable for the pump flow (ASTM sch40/80 orPVC10Kg/cm2). Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. 96 od55790/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning ofCI control Valve, Butterfly Valve inmainline for by pass and flow diversion of approved quality with pressure rating of PN10. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. 97 od55791/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning of 2gunmetal Non Return Valve PN10 with all accessories to prevent back flow. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 98 od217767/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning of PVC Pressure release valve 2" with all accessories . Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete. 99 od217768/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning ofCI Paddle Wheel Water Meter Metal Flanged of pressure rating 10 Bar with all accessories . Work has to be executed as per the approved drawings and/or as per the direction of Engineer in charge.Rate inclusive of all materials, fittings, labour, transportation complete. 100 od55792/2024_2025 : SKOD_ SP_2023 :Automation Equipment : Supply, Fixing & Commissioning of Automation Equipment: 14 Awg cable with high molecular weight polyethelene and applications upto 600volts , temperature upto - 55 to+ 60 deg centigrade ,soft drawn bare copper meeting ASTM B3, tensile strength 1400PSI for two way communication between solenoid valve and decoders complete .Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings, labour, transportation complete. 101 od55793/2024_2025 : SKOD_ SP_2023 : Supply, Fixing & Commissioning of ASTM Station Modular Controller UV resistant,wall mount case,with LCD display ,non volatile memory,10KV surge protection with removable front panel and programmable under battery in office, total run time calculator ,short detect errors, one touch watering, with contract default programes, slow closing valve removable battery with sensor terminals. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings,labour, transportation complete. 102 od55794/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning of3" Solenoid globe Valves as central shut off valve with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 0.7 to 10 bar and maximum flow of 10 to100 m3/h ,at water temp. upto 60°C with 24 VAC - 50 Hz,coil resistance 30ohm with provision to attach Pressure Regulating Module (Dial). Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. 103 od55795/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning of2" Solenoid globe Valves with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer, pressure rating upto 10.4bar and maximum flow of 150GPM ,max water temp. upto 42degree centigrade, with 24AC solenoid,current rating 0.41A @60Hz,coil resistance 30 ohm with provision to attach Pressure Regulating Module (Dial). Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials, fittings, labour, transportation complete. 104 od217791/2024_2025 : Supply, Fixing & Commissioning of 3Disc Filter made of HDPE having an suitable inlet connections,spinning particulate in suspension away from the filter ingelement , 3/4 out let for flushing at bottom of filter & maximum working presure of 12Bars. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete. 105 od217793/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning ofPressure Regulating Module (Dial) to Maintain constant outlet pressure between 1.04 to 6.9 bar. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete. 106 od217794/2024_2025 : SKOD_ SP_2023 :Supply, Fixing &Commissioning of Direct bury-on wire connect or with strain relief, UL 486 D certified, with water proof silicon sealant, fits wire from 22ga to 6ga as per specifications complete. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. Rate inclusive of all materials, fittings ,labour, transportation complete. 107 od217795/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning of Moisture sensing device, to measure soil temp, EC, Moisture level complete to convert as smart controller, with corrosion resistant sensor and setting threshold moisture level. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. 108 od55796/2024_2025 : SKOD_ SP_2023 : Supply, Fixing & Commissioning ofASTM automatic rain shut off device, latching hinge with multiple rain fall settings 5mm to 20mm ULCUL listed Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. 109 od55797/2024_2025 : SKOD_ SP_2023 :Supply, Fixing & Commissioning of Pump relay 24AC PLA relay, stabiliser 300watts Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete. 110 90.12.41.6 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 3 core 6 sq mm with factory made clamp 111 90.12.41.7 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 3 core 10 sq mm with factory made clamp 112 90.12.41.32 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 6 sq mm with factory made clamp 113 90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor (10 SWG) 114 Solar 115 od217812/2024_2025 : SKFOD_ Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:-a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.c) Data Monitoring System complete with accessories.d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.e) Lightning and surge voltage protection.f) Connections & Interconnections by supplying &fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying &fixing of necessary channel/conduit lugs and other accessories etc. as required. All makes and execution of work done as per the direction of engineer in charge.
