Tender For Remaining Work For Construction Of Police Station Building At Pahari Disttt. Bharatpur. - Part-A ( Dismantling and Demolising work) 2 Dismentling stone slab roofing over wooden Karries and battens (dismentaling of Karries and battens to be paid sepratly)including stacking of servicable material and disposal of unservicable material within 50 meter lead 3 Dismentalling doors, windows and clearstory windows steel or wood shutters including chowkhats and holdfasts etc complete and stacking within 50 meter lead of area exceeding 3 Sqm 4 Demolishing Stone rubble masonry manually/ by mechanical means including of servicable material and disposal of unservicable material within 50 meters lead as per direction of engineer incharge (In Lime mortar) 5 Part-B Civil work 6 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil. 7 Earth work in excavation over areas (exceeding 30cm in depth, 1.5 Mtr. in width as well as 10 Sqm on plan) including disposal of excavated earth lead up to 50m and with all lift disposed earth to be levelled and neatly dressed: All kinds of soil 8 Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). 9 Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand. 10 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 11 Random rubble dry stone Kharanja under floor. 12 Carriage of earth, sand, lime, morrum, mannure or salb etc. including loading, unloading & staking as per specification etc. complete with lead of 10 Km. 13 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 14 ANTI TERMITE TREATMENT: - 15 Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement : 6-Sand). 16 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for : 17 Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam etc.for using steel telescopic prop instead of wooden member 18 Add extra over item no 4.7.2 for using steel telescopic prop instead of wooden member 19 Columns, pillars, posts and struts etc. 20 Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.M20 grade Nominal Mix 21 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement for :- 22 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M20 grade Nominal Mix 23 Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases. M20 grade Nominal Mix 24 Add extra forProviding M-25 grade R.C.C. instead of M-20 grade R.C.C. 25 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. 26 Thermo-mechanically Treated bars (Conforming of relevent IS code) 27 Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. 28 Cement mortar 1 : 6 (1 cement : 6 coarse sand) 29 Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. 30 Cement mortar 1 : 4 (1 cement : 4 coarse sand) 31 Add extra over item No. 5.8 for half brick masonry in super structure upto third story including cost of norminal hoop reinforcement (2 Nos. ,6mm Ø M.S. bar at every fourth course) . 32 Cementconcrete1:2 :4(1cement:2coarsesand:4gradedstoneaggregate20mmnominalsize) with water proof compound as per manufactures specification. 33 Crazy marble stone flooring 20mm thick marble stone over roof in ordinary cement with black or of specified color topping including filling the gaps with cement marble chips mix in proportion of 4 : 7 (4cement : 7 white black or white or black marble chips) size from 1mm to 4mm by volume and under layer of 25mm thick cement concrete [1 : 2 : 4, graded stone aggregate 12.5mm nominal size] rubbing and polishing and cement slurry etc. complete : Providing marble strips in joint of crazy flooring strips 40 mm wide and 12 mm thick. 34 Providing batta (gola) 75mm x 75mm in cement concrete (1 : 2 : 4) including finishing with cement mortar 1 : 3 as per standard design. 35 Providing and fixing up to floor three level pre cast cement concrete string or lacing courses, copings, bed plates, anchor blocks, windows sills, shelves, louvers steps, staircases, etc. including carriage, hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surface, including all T & P, curing etc. complete:Nominal M15 grade Mix (with graded stone aggregate 40 mm nominal size).Cement Concrete 1:2:4 36 Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges : Kota stone 25 to 30mm thick. 37 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of :Green / Black / Other granite Above 3601 Cm2 Slabs 38 Supply & fixing of steel window made out 75x40 mm hollow metal pressed section of 16 gauge thick sheet partly openable and partly fixed panel shutter with 5 mm thick plain glass panes outside openable and wire gauge 14x24 gauge inside openable shutter with M.S. square bar 10 mm side, fixed, portion of window should be glazed by 5 mm thick plain glass of TG welded to M.S. frame and approved make putty with glazing clips inching joints mitred and plug welded with suitable hinges hold fast steel lug and screws with approved oxidized steel handles fittings peg stays etc. complete in all respect including providing 10 mm square MS bars 15 cm. center to cernter and applying priming coat of red oxide paints as per approved drawing by Engineers incharge ground floor/ first floor. 39 Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with C.C 1:2:4( M-15 Grade)complete in all respect as directed by Engineerin-charge:Profile C 40 Providing and fixing frame for doors and windows of EZ-7 ISI marks section welded at corners and dully painted with red oxide paint, frame to be fixed by MS flat 230 x 16 x 3mm size holdfast embedded in cement concrete M 100 (1 : 3 : 6) block size 230 x 115 x 75mm with oxidized iron 100 mm round hinges screwed and welded complete in all respect as per design with priming coat of red oxide. 41 Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. 42 Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).With 75mm opening when closed 43 Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 44 Supply & fixing steel shutter (Almirah type) with 18 gauge steel border & steel shutter including locking arrangement and painting etc. complete fixed on wall with joint fast (iron clip) 45 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A :35 mm thick .Commercial Veneer both side 46 For Internal teak wood lipping in 25mm depth 47 Polished Blue Kota Stone flooring skirting, laid over 20mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab from 2001 to 5000 Sq.Cm (a) 25mm thick slab. 48 Polished Blue Kota Stone slab in steps, walls, pillars having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete : 20mm thick slab area upto 900 Sq.Cm. 49 Extra for Mirror polishing on terrazzo/Kota stone work where ever required to give high gloss finish complete. 50 Cement concrete flooring grade 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete :75mm thick with 20mm thick nominal size aggregate. 51 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) 52 Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished :-20 mm thick 53 Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished :-12 mm thick 54 Applying Birla / JK white cement based putty over cement plaster surface for making even surface. 55 Making grooves as per design in plaster 10mm to 20mm wide Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mmand 10 mm thick as per approved design 56 Providing and fixing Anodised Aluminium Curtain rod with Aluminium brackets complete :25 mm dia 57 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 58 Add extra over item no. 7.3.1 and 7.3.2 for Marble printed, granite shade tiles. 59 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 60 Add extra over item No 7.6.1 and 7.6.2 for using 400x400mm size MAT finished tiles in place of 300x300mm size. 61 P & F Vitrified Porcelain Polished tiles ( Naveen/ Euro make , size 600 mm x 600 mm and thickness 10mm) on floor, skirting and steps etc. laid with tile admixture (Roff Pidilite or equivalent) including filling of joints by water proofing tile grout (Fevimate, Roofie, Untile or equivalent) specially for adhesive with graded granuals, polymer and stable pigment fine finished including cleaning of joints etc. complete as per direction of Engineer Incharge. Conforming to IS 15622 of approved make in all colour and shade, 62 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. 63 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 64 Decorative plaster work with spectrum textured coating as per approved colour and shade complete as per manufacturers specifications. 65 PERKY-FINE TEXTURED- (Roller Finish) av. thickness 400 to 500 microns. 66 Painting with enamel paint of approved brand and manufacture to give an even shade : 67 Two or more coats on new work 68 P & F rigid pvc pipe (IS:4985 mark) class II/ (4 kg./cm2) approved quality / make including joining the pipe with solvent cement rubber ring and lubricant : 110mm dia 69 P & F rigid pvc pipe fittings (IS : 4985 mark) of approved quality / make including joining the pipe with solvent cement rubber ring and lubricant : 70 Bend 87.5 :110mm dia 71 Pipe Clip :110mm dia 72 Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick batscomplete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. 73 Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete. 74 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours.b) Second layer of slurryof cement @ 0.242 kg/sqm mixed with water proffing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for4 hours followed by water curing for 48 hours.The rates includes preparation of surface treatment & sealing of all joints ,corners,junction with polymer mixed slurry. 75 Extra for providing edge moulding to 18mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer - in - Charge. Granite Work 76 Providing and fixing factory made polyvinyl chloride (PVC) Door frameof the size 50x47mm with a wall thickness of 5mm made out of extruded 5mm, made out of extruded 5mm PVC foam sheet, mitre cut at two corners and jointing with 2 nos. of 150mm long brackets of 15x15mm M.S. Square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. square tube of 19gauge, EPDM rubber gasket weather seal to be providing through out the frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasterners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum 2 nos. for horizontal member etc. complete as per manufacture specifications and direction of Engineer- in-charge. 77 Providing and fixing of 30mm thick Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sizes of 19mm for styles & 15mm x 15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame shall be covered with 5mm thick heat moulded Rajshri PVC C Channel of size 30x50mm forming styles and 5mm thick, 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side & 10mm (5mmx2) thick, 20mm wide cross sheets as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. framewelded / sealed to the stiles & rail with 30mm wide x 5mm thick PVC sheet beading on either side the jointed together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufactures specification & drawing (For W.C. & Bathroom shutters). including all door fittings such as Hinges, L-drop, Handles, Locking bolts etc. as per approved of Engineer-in-charge 78 Rain Water Harvesting 79 Construction oftubewell up to 100m depth and above to accomodate housing and assembly pipe in all types of alluvium strata by rotay drilling method with code of practice for construction and testing of tubewells (IS:2800 (Part-II) : 1991 and IS:2800 (Part-II) :1979 both amended up to date) with supply of bail plug if necessary.The work will not include cost of housing pipe and strainer pipe assembly cost, gravel and development work. Work would be deemedcompleted only after obtaining sound free water during pumping.200 mm nominal bore 80 Construction of Recharge Shaft in filter pit including Earth work Excavation , lifting excavted earth with all lift and 50 m lead and centering & shuttering evenever required. Diameter 900 mm 81 Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20 mix with40 mm thickness Diameter 900 mm 82 Supply & lowering air line of 25mm dia, G.I. pipe B class having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion & making air vent at top including the cost of Tee-Nipples, Elbow, Socket etc. 83 Supply and lowering vent air pipe 63mm dia rigid PVC pipe(IS 4985) mark class II (4kg per cm2 ) with required all necessary fittings including perforation of 3 to 5 mm size all around the pipe at a distance of 180 to 220mm in zig zag fashion and making air vent at top complete as per direction of Engineer incharge. 84 Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids 85 Size 9 to 12 mm 86 Size 3 to 5 mm 87 Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, without deduction of voids. 88 Excavation in roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tipper, trimming bottom and side slopes in accordance with requirement of lines, grades and cross section and transporting to embankment location with lift upto 1.5m and lead up to 1000m as per technical specification clause 301.3 89 Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 100 mm as per drawings and as per IS15658:2006. and all materials shall conformto MoRTH Specification Clause 602.with M-30Grade0.30Mtrx0.30 Mtr x 0.15 Mtr Edge Blocks.CategoryC:Not dentatedonany of its faces like Hexagonal, Rectangular, Square shape as per IRC:SP:63-2004 90 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to be required line, level and curvature jointed with cement mortar 1:3 (1 Cement: 3 Coarse sand) including making joint with without grooves (Thickness of joint except at sharp curve shall ot be more than 5mm) including making drainage opening whereever is required complete including painting etc as per direction of engineer Incharge (Length of finished kerb edging shall be measured for payment).(Precast CC kerb Stone shall be approved by Engineer In charge.) 91 sanitary work 92 P&F Indian type white glazed vitreous china 1st quality W.C. Orissa pan( IS. 2556 Mark) with 100 mm vitreous china Por S trap including cutting and making the wall and floor. Size 580mmx440 mm 93 P & F Europeantype white glazed vitreous china 1st quality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor Wall Mounting (syphonic) 94 P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked)White 95 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:- PVC with PVC bend of make Commander champion 96 P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 580 mm x 450 mm 97 P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor :1.0mm thick salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel- Kanth, Jaina, Faber, Cryistal) with large waste coupling. :-Size 37x18x7 (Overall Size)37 x 18 x 717x15x7 (with drain board) 98 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (large) or half stall size 610x400x80mm. 99 P&F W.V.C.(IS:2556)Squatting Urinal of standard make complete,including cutting and making good the wall and floor : size 450X350 mm 100 P&FC.P.brassUrinalFlushPipeset complete with flanged brackets of approved make.For 3 Urinal 101 P & F C.P. brass Urinal Spreader for stall urinal of approved make. 102 P & F Marble. Urinal Partition slab both sides polised of approved design cut from marble size 900X600mm. Makrana Albeta marble having light spreaks 103 P&F W.V.C. Half- round channel of approved make in C.M. mortar 1:3, Joints finished in white cement of :size 150mm 104 P & F Bevelled edge Mirror of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick asbestos cement sheet ground fixed to wooden screws & washers. 105 Size 600 x 450mm x 4 mm thick 106 P & F Grating of approved quality/make: 107 Stainless Steel Sheet size 125mm dia. 108 C.P. brass Towel Rail elbow type with concealed screws size 450mm (Heavy duty). 109 P & F Liquid Soap Container with brackets complete of approved make: 110 C.P. brass 111 P & F Tooth Paste & Brush Holder of approved quality/make: 112 C.P. brass (Heavy and Superior quality. 113 P & F Soap Dish or Tray of approved quality/make 114 C.P. brass heavy and superior quality. 115 P & F Bath Shower of approved quality/make. 116 C.P. brass of Heavy & superior quality, revolving with adjustable key 150mm. 117 P & F Extension Pipe for bib cocks of approved quality/make. 118 C.P. brass of Heavy & Superior quality 50x15mm 119 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 120 Providing & fixing C.P.flange for 15mm dia taps. 121 P & F Bib Cock (IS:8931 Mark) 122 Superior quality of approved make :long nose, 15mm nominal bore weight not less than 810 gm 123 CP Brass bib cock, 15mm nominal bore. 124 P & F stop cock (IS:8931 Mark), superior quality of approved make : 125 Brass 1350 gm. 25mm nominal bore. 126 P & F Ball Cock (IS : 1703 Mark) with Rod & P.V.C. Ball complete : 127 Brass wt.400 gm. 15mm 128 P & F Inlet Connection (Angle Valves) Superior quality, of approved make for Wash basin, Gyset etc. 129 ---do--- with 37cm long pipe and nut 130 P & F Sink cocks of superior quality & approved made : 131 CP Sink cock swinging spout 15mm 132 P & F 15mm. Dia Connection Pipe of approved quality/make : 133 PVC pipe with C.P. Brass nuts upto length 300mm 134 P & F Full way valve (IS:778 Mark) or wheel valve of approved make : 135 Gun-metal 15mm nominal bore. 136 (-do-) 25mm nominal bore. 137 P & F Mixing Range (15mm) 138 C.P. One hole / close basin mixer with casted spout 139 C.P. wall mixer telephonic type crutch & telephonic shower 140 P & F PVC storage Tank (IS : 12701 marked indicating the BIS license No.), of approved make with cover, 25mm dia 1M long G.I. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design : 141 1000 litres capacity. 142 Hoisting Charges for each floor : 143 For items 2.26.5 to 2.26.8 144 Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size. 145 15mm dia nominal bore 146 25mm dia nominal bore 147 Providing and fixing square mouth S.W. gully trap grade A complete with C.I. grating brick masonry chamber with bricks of class designation 75 and water tight C.I. cover with frame of 300x300mm size (inside the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg. as per standard design : 148 225 x 150 mm size P type 149 P & F rigid pvc pipe (IS:4985 mark) class II/ (4 kg./cm2) approved quality / make including joining the pipe with solvent cement rubber ring and lubricant 150 75mm dia 151 110mm dia 152 P & F rigid pvc pipe fittings (IS : 4985 mark) of approved quality / make including joining the pipe with solvent cement rubber ring and lubricant : 153 Bend 87.5 154 75mm dia 155 110mm dia 156 Coupler (Socket) 157 75mm dia 158 110mm dia 159 Plain Tee 160 75mm dia 161 110mm dia 162 Vent Cowel 163 75mm dia 164 110mm dia 165 Pipe Clip 166 75mm dia 167 110mm dia 168 Plain floor trap 169 110mm dia 170 Construction of manhole in all type of soil inner size 90 X 60 Cm. 450 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. 171 Depth up to 0.5 M 172 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. 173 Inside size 450 X 450 mm depth upto 0.5 MCement cover with frame. 174 Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: 175 Size 300 cm. dia outside & 300 Cm. depth 176 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja,50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- 177 Size 400x140x150 cm.(for 50 users) 178 Construction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with : 179 C.P. Brass grating 180 Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. 181 150mm dia 182 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design 183 150 mm diameter S.W. pipe 184 P & F GI pipes (External works) with GI fittings (IS:1239 Mark) including trenching & refilling earth etc. 185 15mm dia nominal bore 186 25mm dia nominal bore 187 P & F G.I. pipes (Internal work) with G.I. fittings (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors : 188 Exposed on wall 189 15mm dia nominal bore 190 25mm dia nominal bore 191 15mm dia nominal bore 192 Making connection of GI distribution branch with GI main including all fitting 193 Upto 25mm dia 194 P & F sand cast Floor Trap (Nahni) of (IS:1729 mark) of approved quality / make with socket down or hinged grating including and making good the floor. 195 Size 100x100mm 196 P & F Sand-cast Iron (S.C.I.) Pipe (IS : 1729mark) of approved make in wall or in floor with M.S. holder bat clamps in 10 X 10 X 10 Cm. M-15 grade concrete blocks, joints filled with CM 1:4 with spun yarn including cutting holes and making good the wall: 197 75mm dia 198 100mm dia 199 Add extra for Lead caulked joints (IS:782-1978) in sand cast iron pipes/spun 200 75mm dia, 0.88 kg. Pig lead 201 100mm dia, 0.98 kg. Pig lead 202 P & F SCI Fittings (IS : 1729 mark) in CM 1:4 with spun yarn 203 75mm with door 204 Tee 205 Bend 206 100mm with door 207 Tee 208 Bend 209 Electrical work 210 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI markedMMS ( IS:9537 P - III ) PVC conduit & its accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories) 211 Short point (up to 3 mtr.) 212 Medium point (up to 6 mtr.) 213 Long point(up to 10 mtr..) 214 Wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & its accessories, round tles,18 SWG M.S. box with earth terminal, 6 A two way switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories) 215 Long point(up to 10 mtr..) 216 Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & its accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal,6 Aswitch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories) 217 On board 218 Short point (up to 3 mtr.) 219 Medium point (up to 6 mtr.) 220 Long point(up to 10 mtr..) 221 Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required. GP1 ( use semi moduler accessories) 222 In Item no. E020100, E020200, E020300 The rates are for flush type PC / Urea series accessories ,for using semi modular PC / Urea series accessories, rate shall be increased 2 % in point wiring rate( For item no. 1 to 4 ) 223 S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit and making good the same as required.Gr I 224 20 mm 225 25 mm 226 32 mm 227 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.Gr I 228 3x 1.5 sq.mm 229 2 x 2.5 sq. mm. + 1x1.5sqmm ( All light and power Ckt) 230 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (AC Ckt) 231 4 x 6.0 sq.mm (Sub main) 232 1 x 4.0 sq.mm (With sub main ) 233 P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.Gr I 234 Single pole MCB 235 6 A to 32 A rating 236 Double pole MCB ( for UPS and AC Point ) 237 6 A to 32 A rating 238 Four pole MCB 239 40 A 63 A rating 240 Triple pole MCB 241 40 A 63 A rating 242 P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.Gr I 243 Double door (single phase) 244 4 Way 245 Double door (Three phase) 246 6 Way 247 P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCCB and SP / TP MCB as outgoing ,phophatised ,powder painted complete with insulated suitable ratingcopper bus bar , neutral link, earth link and din bar, masking sheet & conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. GP1 248 Double door with Provision of Incomer MCCB 100 / 125 A Rating 249 6 Way 250 P&F flush/surface type enclosure for housing MCB/Isolator with Din rail including making connectionswith lugs, repairs etc. as required. GP1 251 With sheet steel enclosure 252 Two way 253 P & F ISI marked following semi modular accessories with decorative cover plate of approved colours including making connections testing est. as required GP1 254 RJ-11 telephone jack single two line 255 RJ-45 computer jack with shutter 256 5 step fan regulator 257 T.V. socket single outlet 258 P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. GP1 259 1-2 Module 260 P & F following size mounting grid plates with cover plates GP1 261 1/2 Module 262 SITC of quick make and quick break3 pole current limiting MCCB having following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with frontface and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push( test) to trip, including making connections with lugs & spreaders,etc. as required. GP1 263 With Thermal Magnetic release 264 up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu 265 P/Laying P.V.C./ XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.Armoured 266 10.0 Sq.mm 267 4 core ( For Submersible pump) 268 25.0 Sq.mm 269 3.5 core ( For main line) 270 Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 271 4 x 10.0 sq.mm 272 3.5 x 25.0 sq.mm 273 P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make.Outer Dia. / Inner dia. 274 110 / 95 mm 275 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. B class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. 276 Maintenance free Gel EarthingwithPipe in pipe / Pipein striptechnologyfilled with anti corrosive conductive compound ( CPRI Tested )below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineralfillingcompound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone) and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes. 277 With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating 278 GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip 279 S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 280 25mm x 6mm G.I. ( Hot Dipped) Strip 281 8 SWG G.I. ( Hot Dipped) Wire 282 P&F 1200mm sweep BEE 5 star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/p 50 watt at max speed & 230 Volt, air delivery>210 CMM, Speed> 330 RPM with down rod upto 30 cm with 3 x 1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required. 283 P & F 18 swgM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . 284 P&F of Double ball bearing, capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.Gr I 285 300 mm sweep 286 P&F of Heavy duty capacitor start, Double ball bearing900/1400 RPM single phase ISI marked Exhaustfan,IS:2312 marked in existing opening including making connections testing etc. as required. GP1 287 300 mm sweep(900/1400 RPM) 288 Supply & FixingISI marked( IS : 15683 )Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, completein all respects includinginitial fill and wall suspension of following capacity.GP1 289 6 kg 290 P & F of IP 65 protected LED Street Light fixture 70-75 watt (with surge protection device 10KA) applicable for area lighting with extruded pressure diecast aluminium housing, system lumens efficancy of 100 Im/watt minimum, toughened glass with diffuser, suitable lenses on LED, 240V, 50 Hz of High Power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency>85% and in compliance to IEC standards system life of 50,000 Burning Hours, CRI>80, PF>0.90 at full load, CCT 5700-6500 K (as per direction of Engineer incharge). Fixtures shall be CE compliance. 291 S & F of Street light bracket made out from following size of B class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. 292 32 mm Dia. 293 Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required. GP 1 294 Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required GP 1 295 Supply & fixing of Faceplate for Flush / SurfaceMount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm GP 1 296 Single Aperture 297 Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable GP 1 298 9 U(44 mm ) wall mounted 299 P & F ISI marked gong bell including making connection testing etc. as required.GP1 300 P & F ISI marked flush/surface type buzzer including making connection testing etc. as required.GP1 301 P & F ISI marked single tone electronic call bell including making connection testing etc. as required.GP1 302 P & F ISI markedding dong/musical chime bell including making connection testing etc. as required.GP1 303 P & F IS:371 marked6 amp surface type ceiling rose including making connection testing etc. as required.GP1 304 P & F ISI marked6 amp bakelite batten/angle holder including making connection testing etc. as required.GP1 305 P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required. GP1 306 4.0 Sq.mm 3 core flat / Round 307 Supply and fixing of Oil / Air break Starter panel made out of sheet steelpowder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFFpush buttons,ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors. GP1 308 For single phase Submersible / Monoblockpump 309 0.5 HP to 3.0 HP 310 P & F of 4 star ratedvertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloyconnection,testing etc. as required. GP1 311 25 Ltr. 312 P & F energy efficient/energy saving 9 watt IP 20 LED Bulb cool white, in existing holder/fixture as required, minimum 900 Lumen output, 25000 burning hours, CCT 5700 K or 6500 K (as per direction of Engineer incharge), ANSI Lamp efficacy minimum 100 lumen /Watt, CRI 80, Driver efficiency > 85%, PF 0.95 at full load/230 volt AC. 313 P & F of IP20 surface/recess mounted LED downlight made of pressure diecast aluminium housing, with heat sink and good quality reflector, high efficiency external driver, power consumption 14/15 watt, system lumen efficiency >80 lumen/watt, CCT 6000K (minimum) K, CRI>80, PF>0.9 life time 50,000 burning hours. 314 P&F of IP 20 LED tube light 20 watt external batten mode from CRCA sheet steel suitable to replace T-8/T-12 tube light, integral driver, 2000 luman + 5% tolerance system kuman efficiacy oh 100 Lm/watt minimum expected life time of 25000 burning hours, CCT 5700 K, ANSI, CRI 80, driver efficiency>85% , Life expectancy of driver min 30000 hrs. PF 0.95 at full load/230 volt AC. 315 P&F of 36 Watt IP 20 LED 2x2 fixture, Recessed / surface type, having efficacy of not less than 100 lumen / watt, made out from CRCA housing and with high purity / transmisvity duffuser for uniform light distribution high efficiency driver electronics and in compliance to IEC standard (integral with light fisture), life time of more than 50000 burning hours, CCT 6000K (minimum), CRI>80 driver maintaining PF>0.9. 316 SITC of MNRE approved & confirming to IS:12933 P-1,2,3&5 Flat Plate Collector type solar hot water system withcollector, insulated stainless steel storage tank with electrical back up , MS standfor Collector & Tank etc. as required. of following capacity. 317 500 litre/ day 318 Non BSR but already approved rate 319 P&F of CE & ROHS Certified, IP65 protected “All in one” Solar streetLight luminaries made out from powder coated die cast aluminum alloy housing, comprising of mono-crystalline silicon solar panel, Controller (with MPPT function), PIR sensor can control by remote, Real time on/off function for auto operation of light & Lithium battery with 6 hour charging, 12-16 hours discharge on full power mode and 30-36 hours discharge on power saving mode. With High Power LED’s having individual lens to achieve beam angles, LED Make: Osram, Phillips, Bridgelux, CREE. 320 12 watt LED Solar Panel : 18V, 38WHBattery: 12.8 v, 15AHLumen:1200-1320 LM 321 Infrared Bullet / Dome Camera 322 Supply of 2 MP HD Analog IR Bullet Camera, CMOS/CCD, Min. Illumination 0.01lux (color) & 0lux with IR or better, upto 1920×1080 @ 25fps or better resolutions, 3.6mm fixed lens, able to provide 80° or better angle of view Day/Night, 20 Meter or better IR Range, S/N Ratio >62db or better, shutter speed 1s ~ 1/50,000s, True WDR 120db or better, AGC, White Balance ATW, BLC, DNR, Mirror, 12V DC, power consumption should not be more than 7W, able to work in -40° ~ 60°C temperature or better,IP66 rated housing with fully metal body, complete with mounting accessories. UL, CE and FCC CertificationApproved Makes: LG / SAMSUNG / HIKVISION 323 16 Channel Digital Video Recorder 324 Supply, Installation, Testing and comissioning of 16 Channel Digital Vedio recorder to support 16-ch 1080P video input with 2 slot for HDD. HDMI output, 1080P playback resolutions, bit rate 32 kbps-10Mbps, complete in all respect as per aboev specifications ( (DVR Approved Makes : Hikvision, Samsung, LG). NVR and Camera should be of the same make for smooth functioning. 325 SITC of 4 TB Surveillance HDD (Approved Makes: Seagate) 326 SITC of SMPS Power Supply required for the above 16 cameras (Standard make) 327 SITC of wiring for analoge camera video and power composite cable (3+1) 328 Supply, Installation, Testing and Commisioning of good quality of BNC connector, complete in all respect. 329 Supply, Installation, Testing and Commisioning of good quality of DC PIN connector, complete in all respect. 330 Supply of 19 (18.5”) Full HD LED / LCD Security Monitor, LED-Backlit TFT LCD technology with 1366×768 resolutions, Wide view angle: 90°(H)/65°(V), 3D comb filter, 3D De-interlace, 3D noise reduction, HDMI, VGA input, High reliable components for 7×24 working, Brightness: 200cd/m2 or better, Contrast: 600:1 or better, Color: 16.7m or better, VESA stand, power consumption not more than 25W, with HDMI Cable and mounting accessories Approved Makes: LG / SAMSUNG / HIKVISION / HONEYWELL
