Providing Rates For Supply/Fixing Of Various Items As Per Bill Of Quantity For Meerut Mandal (Part-Iii) - Providing and fixing chicken wire mesh ( Murga jali ) in cement plaster over joints of R.C.C and brickwork. Supplying, fabricating, transporting, hoisting and fixing in position good quality of Jaisalmer Yellow Sandstone in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding. The carving and molding work shall be of very good quality. The stones to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architects. Providing and fixing StandAlone Signage in yellow jaisalmer sandstone of approved thickness with powder coated 10-12mm MS letters and illustration at desired locations with letters (in english, hindi and Braille)- etched, through cut, infilled or painted, also including the cost of design, fabrication and onsite installation with all the necessary accessories and equipments for fixing on any surface as per drawing and design approved from Architect in charge.English: Helvetica Font with min. 36size, Hindi: Krutidev Font with min. 36 size Supplying and applying Stone Crete plaster with proper mixing, application, finishing, curing, washing, and sealing. Materials include high-quality Stone Crete mixed with colored chips and pigments, aluminum channels (25mm x 3mtr) fixed with cement paste, and a bonding agent of slurry mix (cement, water, bonding agent).It involves mixing materials, fixing channels every 3m, applying a bonding primer, and using a trowel for uniform coverage. Once 80-90% dry, the surface is washed with a sponge and nylon brush to remove cement particles. After 24 hours, an acid wash is performed for final cleaning.Curing takes 48 hours, followed by a final wash and the application of a high-quality sealer for durability. Quality assurance ensures professional execution with inspections for uniformity and finish.Colour Pigment and texture will be approved by an architect Incharge.(Make: ACI/Asian/Nerolac or equivalent) Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. ties 350 mm long of 25x3 mm section at not less than 3 ties per sqm as per approved design.(Prayag Clay tiles/Nuvocotto or equivalent) Supply and Laying a water soluble penetrative solution for waterproofing of masonry building material & Nano technology based as it provides molecular level hydrophobicity to inorganic substrate .The product is based on organosilicon chemistry, hence reacts with the inorganic substrate surface, seals the surface uto a depth of 2-3 mm and provides long service life where Nano size allows penetration deep into substrate that provides 20+ years water repellency. including cost of all materials, labour tools and plants etc. required for proper completion of the work. (Make: Zycosil/Pratt & Lamber or Equivalent) 12 mm Brick tile work for wall lining over required bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/Sqm including pointing in white cement complete.(Make:Prayag clay tiles/Nuvocotto or equivalent) Supply & fixing clay tiles of 10X16 inches on roof including the cost of Ridge, typical caly tile, edge tiles and inlcusion of glass tiles in color and finish as per drawing approved from Architect in charge, and supply of all materials labours & tools etc required for safe erection and cost of adhesive, waterproof membrane and MS frame of L profile/rectangular hollow sections required for fixing and supprting the tiles., also includes the cost of all the necessary fitting and required for completion of the work as per Engineer in charge.(Make:Nuvocotto/Wienerberger or equivalent) Providing and fixing StandAlone Signage in Marble of approved thickness with powder coated 10-12mm MS letters and illustration at desired locations with letters (in english, hindi and Braille)- etched, through cut, infilled or painted, also including the cost of design, fabrication and onsite installation with all the necessary accessories and equipments for fixing on any surface as per drawing and design approved from Architect in charge English: Helvetica Font with min. 36 size Hindi: Krutidev Font with min. 36 sizeSignage- B :- Design, fabricate, and install aluminum reflective signage with a 2mm thick aluminum panel (1200mm x 600mm for the upper, 1200mm x 300mm for the lower) coated with high-intensity retro-reflective vinyl sheeting as per ASTM D4956 Type IV standards. The signage will be mounted on two galvanized steel posts (65mm dia, 2400mm height), fixed on M20 grade concrete foundations (600mm x 600mm x 900mm deep) with stainless steel fasteners. The installation includes excavation, concrete work, and secure fitting of the signage at the designated location, with all work as per drawings and approved by the architect in charge. Providing and fixing StandAlone Signage in Marble of approved thickness with powder coated 10-12mm MS letters and illustration at desired locations with letters (in english, hindi and Braille)- etched, through cut, infilled or painted, also including the cost of design, fabrication and onsite installation with all the necessary accessories and equipments for fixing on any surface as per drawing and design approved from Architect in charge English: Helvetica Font with min. 36 size Hindi: Krutidev Font with min. 36 sizeSignage-C: Informational Name Plates Providing and fixing StandAlone Signage in Marble of approved thickness with powder coated 10-12mm MS letters and illustration at desired locations with letters (in english, hindi and Braille)- etched, through cut, infilled or painted, also including the cost of design, fabrication and onsite installation with all the necessary accessories and equipments for fixing on any surface as per drawing and design approved from Architect in charge English: Helvetica Font with min. 36 size Hindi: Krutidev Font with min. 36 sizeCantilevered Signage Supply & fixing Ornamental clay tiles of 10X16 inches for ceiling including the cost of Ridge, typical caly tile, edge tiles and inlcusion of glass tiles in color and finish as per drawing approved from Architect in charge, and supply of all materials labours & tools etc required for safe erection and cost of adhesive, waterproof membrane also includes the cost of all the necessary fitting and required for completion of the work as per Engineer in charge.(Make:Nuvocotto/Wienerberger or equivalent) Providing, fabricating and fixing/ erection of 6mm SS plate backlitted at desired location as per approved drawing of OLDEST BANYAN TREE NARORA, BULANDSHAHR,or as approved by Client department having Helvetica Font with 400mm size Also including cost of providing and fixing of fasteners complete in all respects as per Architect in charge.(make Metaguise/Citadel/ Woodform Architectural or equivalent) Providing, fabricating and fixing/ erection of 6mm SS plate backlitted at desired location as per approved drawing of 500 YEAR OLD BANYAN TREE ,having Helvetica Font with 300mm size Also including cost of providing and fixing of fasteners complete in all respects as per Architect in charge.(make Metaguise/Citadel/ Woodform Architectural or equivalent) Supply and Laying a water soluble penetrative solution for waterproofing of masonry building material & Nano technology based as it provides molecular level hydrophobicity to inorganic substrate .The product is based on organosilicon chemistry, hence reacts with the inorganic substrate surface, seals the surface uto a depth of 2-3 mm and provides long service life where Nano size allows penetration deep into substrate that provides 20+ years water repellency.(Zycosil/Pratt & Lamber or Equivalent) including cost of all materials, labour tools and plants etc. required for proper completion of the work.(Prayag Clay tiles/Nuvocotto or equivalent) Supply & Installation Of-UNICOPro Welded Mesh Modular FenceSystem.Panel: Galvanised MS Wires.Post: Galvanised MS.Panel Height: 1560 mm.Panel Width: 2500 mm.Mesh Aperture: 50 mm x 200 mm.Wire Diameter: H-4.5 mm, V-4.5 mm.Post Type: H-Profile.Post Height: 1600 mm.Mounting Type: Base Plate.Surface Finish: Pure PolyesterCoating/Over 65 Microns/1000 HoursSalt Spray Tested.Colour Code: RAL 6005 (Moss Green).(Tata Wiron/Ambica wires or equivalent) Supply and fixing of Tri Arc Terracotta Pavers: robust and aesthetic applications, having 3.5 tiles per square foot for coverage; tile weighs approximately 2 kg having terracotta finish as approved by Architect in charge thickness of 60 mm, ensuring durability and resistance to wear and tear. They are ideal for outdoor and heavy-traffic areas, providing both functionality and visual appeal.The scope of work includes delivering the pavers to the site and ensuring proper installation as per best practices. This involves preparing the base, aligning the tiles accurately, and securing them in place to achieve a durable and visually pleasing finish.(Citadel/Nuvocotto/Prayag clay tiles or equivalent) Providing and fixing exposed brick flooring with modular common burnt clay bricks, machine made bricks, where edges are sharp and borders are straight and Size of 200X100X30 of FP-10 having Smooth surface finish with Compression Strength should be less than 105 kg/sq cm and Water absorption should not exceed 20% on a bed of 12 mm cement mortar, to be laid in pattern as per drawing approved from Architect in charge including filling the joints with same mortar (Prayag Clay Tiles/Nuvocotto or equivalent) Providing and fixing archeton terracotta cladding of U-Value 0.8 & R value of 1.25 and dimension 304*594*16 mm with modules of 300*600 with Q3** resistance to impacts (classification as per French standards) with wind resistance to positive/ negative pressure 6500 / 4500 Pa, weight of 27.13 kg per m2 which conform to standard NF EN 539-2, water absorption to be between 3% - 5% conforming to EN ISO 10545-3 § 5.1.1, bending strength not to exceed 1400 Newton conforming to EN ISO 10545-4. Installation of terracotta panels to be done by securing to the vertical T-shaped aluminium profile using the fixing clips fastened with 2 self-tapping stainless steel screws. Vertical aluminium T-shaped profiles are to be pre-punched hole with vertical spacing of 25mm. The terracotta tile is to be well-supported on four points by the clips and on its two smaller sides by the rubber gasket so as to have a very good wind load resistance of more than 6500 PA positive wind load pressure and a negative wind load pressure of 4500 PA and flexural strength of 135 da N. The total thickness cladding system is not to be more than 110 mm. The quantity of products per sq.m are to be 5.56 tiles, with quantity of profiles per main course sq.m to be 1.67 lm/m2, with quantity of clips to be 11.11 nos. per sq.m . Scaffolding and electricity for fixing to be provided by GC Make -(Citadel/Nuvocotto or equivalent) Supply and fixing of Tri Arc Terracotta Pavers: robust and aesthetic applications, having 3.5 tiles per square foot for coverage; tile weighs approximately 2 kg having terracotta finish as approved by Architect in charge make: Nuvocotto/or equivalent; thickness of 60 mm, ensuring durability and resistance to wear and tear. They are ideal for outdoor and heavy-traffic areas, providing both functionality and visual appeal.The scope of work includes delivering the pavers to the site and ensuring proper installation as per best practices. This involves preparing the base, aligning the tiles accurately, and securing them in place to achieve a durable and visually pleasing finish.(Nuvocotto/Prayag clay tile or equivalent) Providing & fixing White River (Stone) Pebbles size of 2 to 2.5 dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. Design & Fabricating Ornamental work on mild steel (MS) sheets, which includes a series of detailed processes to achieve the desired design and finish through CNC cutting, which allows for precise and intricate patterns to be cut into the MS sheet based on the approved drawings and designs provided by the Architect in charge. Following the cutting process, etching and engraving are performed to add depth and detail to the design, enhancing the ornamental appearance. These processes involve carefully removing material from the surface to create the desired patterns and textures. After the cutting, etching, and engraving are completed, refilling is conducted to ensure the engraved areas are smooth and consistent with the overall design. This step ensures that the intricate details are highlighted and any imperfections are corrected. The MS sheet used for this work will be of an approved thickness to ensure structural integrity and durability. Additionally, the specification includes the cost of powder coating the MS sheet in an approved shade. (make Metaguise/Citadel/ Woodform Architectural or equivalent) Design & Fabricating Ornamental work on mild steel (MS) sheets, which includes a series of detailed processes to achieve the desired design and finish through CNC cutting, which allows for precise and intricate patterns to be cut into the MS sheet based on the approved drawings and designs provided by the Architect in charge. Following the cutting process, etching and engraving are performed to add depth and detail to the design, enhancing the ornamental appearance. These processes involve carefully removing material from the surface to create the desired patterns and textures. After the cutting, etching, and engraving are completed, refilling is conducted to ensure the engraved areas are smooth and consistent with the overall design. This step ensures that the intricate details are highlighted and any imperfections are corrected. The MS sheet used for this work will be of an approved thickness to ensure structural integrity and durability. Additionally, the specification includes the cost of powder coating the MS sheet in an approved shade. (make Metaguise/Citadel/ Woodform Architectural or equivalent) 12 mm Brick tile work for wall lining over required bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/Sqm including pointing in white cement complete.(Prayag Clay tiles/Nuvocotto or Equivalent) Supplying, fabricating, transporting, hoisting, and fixing in position high-quality modular size wire-cut bricks for various elements at all levels. The bricks shall be free from cracks, lines, stains, and even in shade for each element, ensuring uniformity. The bricks shall be fine-grained and of a reddish or buff color, sourced locally. The work shall be executed as per the attached drawings, incorporating various processes such as carving (manual or by machine), ornamental work, traditional work, figure work (of any type and size), CNC cutting, and molding. The carving and molding work shall be of excellent quality, finished with a water-repellent coating from an approved manufacturer, as required and as approved by the architects.(Prayag Clay tiles/Nuvocotto or Equivalent) Supply and laying of Chetan 1.5 Mtr RCA Male to XLR MaleCable Make: Bose/ L-Acoustic/ Powersoft Supply, Installation, testing and commissioining of Yamaha PX3 Power Amplifier Make: Bose/ L-Acoustic/ Powersoft Supply, Installation, testing and commissioining of LSZH Speaker Cable 2C/14 AWG 2.5Sq.mm. Jkt Purple 152M Make: Bose/ L-Acoustic/ Powersoft Providing and injecting HM-500 Epoxy Anchoring Type: HM-500 : Red or Black Density: 1.5±0.1g/cm³ in proportion Mix Ratio: 3:1 Color/ or recommended by the manufacturer into drills cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (make Hilti/HM or equivalent) Supply, Installation, testing and commissioining of TruAudio AS-1 AcoustiScape 4.5Outdoor Landscape Speaker Make: Bose/ L-Acoustic/ Powersoft Providing machine made Wire Cut Bricks where edges are sharp and borders are straight and Size of 8.5x 4x3 having Smooth surface finish with Compression Strength should be less than 105 kg/sq cm and Water absorption should not exceed 20%. Thickness of 230mm wall Providing and Filling of Cinder in sunken portion including levelling & dressing complete in all respect as per Engineer-in-charge. Providing and fixing Yellow Sandstone brackets 55x22.5x45 cm sunk and moulded including providing and fixing with 4 Nos gun metal cramp 25x6 mm 30 cm long 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, sidebuttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.Jaisalmer Yellow sand stone Supplying, fabricating, transporting, hoisting and fixing in position good quality of Mid Ornamental Yellow Sandstone in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative size 5MX2.5MX450MM OR tentative Size as approved from architect in charge Supplying, fabricating, transporting, hoisting and fixing in position good quality of Ornamental Jaisalmer Yellow Sandstone statue in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative size 1.5MX1.5MX1.5 M tentative Size as approved from architect in charge Supplying, fabricating, transporting, hoisting and fixing in position good quality of Ornamental Jaisalmer Yellow/Dholpur pink Sandstone Symbol in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative size 0.6 MX0.6 M tentative Size as approved from architect in charge Stone work, plain in copings, cornices, string courses and plinth courses, Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.Jaisalmer Yellow Sandstone Supplying, fabricating, transporting, hoisting and fixing in position good quality of Jaisalmer Yellow Sandstone in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding. The carving and molding work shall be of very good quality. The stones to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architects. Supplying, fabricating, transporting, hoisting and fixing in position good quality of sandstone BRACKET in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative sizeas approved from architect in charge Supplying, fabricating, transporting, hoisting and fixing in position good quality of Ornamental sandstone Jharokha in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative size 0.35 MX0.2 MX0.2 M tentative Size as approved from architect in charge Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Jaisalmer yellow sand stone - Exposed face machine cut and table rubbed with rough backing. . 70 mm thick Extra for forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of stone cladded or laid surface in square or V as per approved pattern, complete as per specifications and direction of the Engineer-in-Charge and Architect in charge. SUBHEAD - XII :SOLAR POWER GENERATION SYSTEMSupply & Fixing of Cantilever Structure: Supply & Erection of builtup cantilever structure 6.00m span comprising of one vertical post of 6 Mtr. High made up of 300mm & N.B. Medium class M.S. pipe as vertical menber welded with (750X750X12mm) MS plate at top and (900X900X12mm) at bottom for bearing of horizontal frame comprising of 50mm N.B. made Medium class main pipe, 40mm N.B. Medium pipe Bracing as per approved Designe, Drawing with one coat of steel primer and two coats of synthetic enamel paint Also vertical pole should have the strip of AFP (Alluminium Flexible Sheeting) 0.3x 0.9 M Pasted and 2 Nos. FMM (Flexible Median Marker) fixing with Epoxy to provide median safety during night time or severe weather at the top of foundation after complete construction of RCC fondation of size 1.00x1.00 Mtr. and 1.80 Mtr. deep for built up overhead structure including earthwork in excavation, 100mm thick lean concrete in 1:2:4 cement, coarse sand and 40mm guage stone ballast, RCC with 1:1.5:3 cement, coarse sand and 20mm stone grit including supply & courting of 25mm Dia foundation bolts (900mm long) as per provision of structure including coast of reinforcement and shuttering as per direction of Engineer-in-ChargeSupply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. Providing and applying of Heritage GRIT FINISH, a surface texture paint after applying corresponding roller coat brush finish as heritage primer on pre plasterd surface to be smooth level without any undulations,color scheme as per approved sample in approved shade.Grit is a two component system of natural marble chips 25 kg and 5 kg of Bonding agent (100% pure Acryalic emulsion). The composition of texture paint consits of grit, made of natural marble chips,no pigment added matt finish.flame retardant resistance to fungal and algal attacks The first coat (primer )should be applied by brush or wool roller as base coat, diluted with sufficient water and the next coat a final coat to be applied with trowel and properly finished. The thickness of both coat should be 1.00 mm to 1.50 mm.Application to be carried out by companys Authorised Dealer Approved Rate of MVDA Mathura Supply of Solar AIO Single piece High pressure Die cast (LM6 Alloy) Aluminium housing appearance of Solar AIO shall be traditional Street Light, IP65 & IK08, suitable for OD 50/60mm bracket, having Min 3000 lumens, suitable for 24hrs (2 Nights) Autonomy and its backup calculation sheet shall be approved by Consultant Dimming Profile : • From Dusk – First 05hours sensor enabled with 30% brightness level • Next 05Hours sensor disabled and fixed at 30% Brightness level • Next 2hours/dawn- Sensor enabled with 30% brightness level Lithium pherrophosphate Battery capacity min 20Ah@12.8V or 256 watt hour & shall be of fresh manufactured battery (Not re-used cells) Battery Temp range -20-+60°C and panel capacity min 35Wp, CRI >=70, Efficacy Min >175lm/W is MUST, system wattage should not be more than 17W ± 5%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. Life class of LED System 50000hrs@L70, LED Make - CREE/NICHIA/LUMILEDS/OSRAM. CE Certified, charger efficiency >90% and standards IEC62109-1, IEC61547, CISPR15, IEC62093, IEC61347-2-13, EN50530, IEC62384 The PV module should be made up of crystalline silicon solar cells Mono-Crystalline and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1,2 IEC60598, Operating temp 0 Degree C to 50 Degree C, certifying above given prameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory, Complete luminaire/battery/panel/charge controller must be BIS accredited (If applicable) and as per UPPWD Approved Product List. Philips Model : SunStay or similar in OSRAM, Lighting technology and Trilux. The provision and installation of a marble bench with precise dimensions of 1500 mm in length, 450 mm in width, and 600 mm in height, complete with detailed carving and ornamentation. The carving and ornamentation must be executed by skilled artisans to ensure intricate and precise details that match the design specifications.Installation includes preparing a suitable foundation, which involves excavation, concrete pouring, and leveling to ensure a stable base. It must be securely fixed to this foundation, with all necessary support structures in place to maintain stability. The marble selected for this bench must be of high quality, suitable for the intended environment, and in accordance with the design approved by the Architect Incharge . Providing and fixing StandAlone Signage in Marble of approved thickness with powder coated 10-12mm MS letters and illustration at desired locations with letters (in english, hindi and Braille)- etched, through cut, infilled or painted, also including the cost of design, fabrication and onsite installation with all the necessary accessories and equipments for fixing on any surface as per drawing and design approved from Architect in charge English: Helvetica Font with min. 36 size Hindi: Krutidev Font with min. 36 sizeSignage-A (SIZE - 2400X1200)MM Providing and fixing StandAlone Signage in Marble of approved thickness with powder coated 10-12mm MS letters and illustration at desired locations with letters (in english, hindi and Braille)- etched, through cut, infilled or painted, also including the cost of design, fabrication and onsite installation with all the necessary accessories and equipments for fixing on any surface as per drawing and design approved from Architect in charge English: Helvetica Font with min. 36 size Hindi: Krutidev Font with min. 36 sizeSignage-C (SIZE - 900X450)MM Extra for forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of stone cladded or laid surface in square or V as per approved pattern, complete as per specifications and direction of the Engineer-in-Charge and Architect in charge. Providing and Fixing of sand stone water spouts of size 900x300x125 with adhesive including the cost of all necessary fittings, accessories as per Design and drawing received from Architect in charge Supply, Installation, Testing & Commissioning of 196mm Dia X 158mm Height 3000K Circular Flood light with Non-integral driver & completely made in India luminaire. Luminaire must use Single LED of Mono colour . The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 & IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 60W and shall deliver 3300 lumens. Beam angle of the Luminaire shall be 15 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, The luminaire shall have declared life of 50,000 burning hours at L70. The luminaire shall automatically addressable using hand-held addressing device. Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make.(Wipro cat ref : LF04-671-15-30-G2 or equivalent in Trilux/ regent/ LT) Supply, Installation, Testing & Commissioning of 1000 mm length X 80mm Width X 115mm Height 3000K Linear Wall Washer with Non-integral driver & completely made in India luminaire. Luminaire must use Single LED of Chip and shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 & IK07 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 96W and shall deliver 5280 lumens. Beam angle of the Luminaire shall be Asymetric optics .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, . The luminaire shall have declared life of 50,000 burning hours at L70. Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. (Wipro cat ref : LF01-671-ASM-30-G2 or equivalent in Trilux/ regent/ LT) Supply, Installation, Testing & Commissioning of 16mmX16mm of 5 meters length 3000K Flexible strip led light with Non- Integral driver.The luminaire’s shall be made of Silicon extrusion with high-efficiency, high grade appearance, soft bend flexibility & Option of Top bend , the same shall be so designed with completely made in India luminaire. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP67 protection. No need external decoder.The LEDs shall have minimum CRI ≥80 (White Light)& shall have SDCM≤5. The luminaire shall have system wattage of 14 Watt/meter and shall deliver 714 lumens. Fixture shall operating temperature range of 0°C to 45°C. The fixture shall have an Non integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. Bidder shall submit the following reports along with technical bid LM79 report of the family of luminaire issued by NABL accredited lab, LM80 issued by LED manufacturer BIS certificate for LED Luminaire. Brand name shall be embossed / printed on each an every light fixtures. make ((Wipro cat ref :LS27-14-TB16-30-G1 or equivalent in Trilux/ regent/ LT) Supply, Installation, Testing & Commissioning of 100 mm Dia X 185mm width X 106mm Height 3000K Circular Mini Flood Light with Integral driver & completely made in India luminaire. The luminaire’s shall be made of Extruded aluminum housing powder coated with C13:C16n Dark Gray color.The complete luminaire has IP65 & IK06 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥70 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 20W and shall deliver 1700 lumens. Beam angle of the Luminaire shall be 15 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 140 - 280V AC.. The luminaire shall have declared life of 50,000 burning hours at L70.Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. (Wipro make - LF39-271-015-30-XX or equivalent in Philips or bajaj) Supply, Installation, Testing & Commissioning of 100 mm Dia - 15 W, Integral Surface Down Light.Housing is made with Extruded Aluminum powder coated,for better heat desipation.Product comprising of LED with 3000K. Fixtures should have toughended glass with 60 deg Beam angle with 1350 Lumens. The luminaire shall have IP65 & IK06 protection.The LEDs shall have minimum CRI ≥70.Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC. The luminaire shall have declared life of 50,000 burning hours at L70.LED Driver efficiency should be 85% & proper heat sink for heat dessipation suitable to operate in input voltage range of 140V to 280V (nominal rated voltage – 240V). LED driver shall have output short circuit & over voltage protection inbuilt. Luminaire and Driver must be made in India with same brand. make: (wipro :- LD08-151-XXX-30-SM or equivalent in bajaj or havells) Supply of Isolated, constant Voltage type 150 W LED Driver enclosure in Extruded Aluminium metal enclosure . Driver shall be made in India compatible for Mono Color luminaires with silicone potted and IP 66 Protected of same make as luminaire. Output voltage of the driver 24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum & sould have large operating input voltage range of 150V to 270V (nominal rated voltage – 240V) with 5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection, Thermal Shutdown protection. Supply, installation, testing and Commissioning of IP67 S Type 2 Core Connector ( C-2C-S-IP67) Supply, installation, testing and Commissioning of IP67 T Type 2 Core Connector ) ( T-5C-T-IP67) Integration and Programming of all the devices listed above Providing & laying of light cinder filling under floor of toilets & other sunken roofs. Providing and laying factory made chamfered edge Cement Concrete paver blocks (200X200X60)MM in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Architect-in-Charge.(Pavers India/Vyara India or Equivalent) Supplying, fabricating, transporting, hoisting and fixing in position good quality of Ornamental Jaisalmer Yellow sandstone Jharokha in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative size 0.5MX0.3MX0.75M tentative Size as approved from architect in charge Stone work, plain in copings, cornices, string courses and plinth courses in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.Jaisalmer Yellow Sandstone Providing and laying factory made chamfered edge Cement Concrete paver blocks (200X200X60)MM in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Architect-in-Charge.(Pavers India/Vyara India or Equivalent) Providing and fixing Jaquar Make Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook of quality and make as approved by Engineer - in - charge. Supply of Surface mounting round 6 Watt 10 Watt , LED Down Lighter, suitable for 24Hr Continuous Operation, 660-1100 system lumens, 110lm/W, PF>0.95, THD <10% at full load, CRI>80, Avg Life Class 50000Hrs @L70, complete in all respect. Supplying of Bulkhead type light fitting complete with, wire guard, holder, electronic ballast 1 x 10 W lamp including connections etc.Including connection with 1.5 sqmm FRLS PVC insulated copper conductor as required. Supplying of LED mirror light luminaire with 10W watt complete with electronic ballast, lamp including connection etc. complete as required, Including connection with 1.5 sqmm FRLS PVC insulated copper conductor. Supply, Installation, Testing & Commissioning of 196mm Dia X 158mm Height 3000K Circular Flood Light with Non-integral driver & completely made in India luminaire. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 & IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 60W and shall deliver 3300 lumens. Beam angle of the Luminaire shall be 30 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC. The luminaire shall have declared life of 50,000 burning hours at L70.Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. Wipro cat ref LF04-671-30-30-G2 or Equ in - Trilux/Colour Kinetics) Supply, Installation, Testing & Commissioning of 16mmX16mm of 5 meters length 3000K Flexible strip led light with Non- Integral driver.The luminaire’s shall be made of Silicon extrusion with high-efficiency, high grade appearance, soft bend flexibility & Option of Top bend , the same shall be so designed with completely made in India luminaire. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP67 protection. No need external decoder.The LEDs shall have minimum CRI ≥80 (White Light)& shall have SDCM≤5. The luminaire shall have system wattage of 14 Watt/meter and shall deliver 714 lumens. Fixture shall operating temperature range of 0°C to 45°C. The fixture shall have an Non integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. Bidder shall submit the following reports along with technical bid LM79 report of the family of luminaire issued by NABL accredited lab, LM80 issued by LED manufacturer BIS certificate for LED Luminaire. Brand name shall be embossed / printed on each an every light fixtures. wipro cat ref LS27-14-TB16-30-G1 or equivalent in Regent /trilux /colour kinetics Supply, Installation, Testing & Commissioning of 1000 mm length X 46.5 mm Width X 75mm Height of 3000K Linear Wall Washer with Integral driver & completely made in India luminaire. Luminaire must use Single LED of Chip and shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 & IK07 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 40W and shall deliver 1900 lumens. Beam angle of the Luminaire shall be 40° optics .Fixture shall operating temperature range of 0°C to 45°C.Input Voltage Range of 100-300V AC. The luminaire shall have declared life of 50,000 burning hours at L70.Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. Wipro make - LF01-361-1540-30G1 or Equ in - Trilux/Colour Kinetics) Supply, Installation, Testing & Commissioning of 100 mm Dia X 185mm width X 106mm Height 3000K Circular Mini Flood Light with Integral driver & completely made in India luminaire. The luminaire’s shall be made of Extruded aluminum housing powder coated with C13:C16n Dark Gray color.The complete luminaire has IP65 & IK06 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥70 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 10W and shall deliver 850 lumens. Beam angle of the Luminaire shall be 15 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 140 - 280V AC.. The luminaire shall have declared life of 50,000 burning hours at L70.Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. Wipro make - LF39-131-015-30-XX or equivalent in Regent /trilux /colour kinetics Supply, Installation, Testing & Commissioning of 100 mm Dia - 15 W, Integral Surface Down Light.Housing is made with Extruded Aluminum powder coated,for better heat desipation.Product comprising of LED with 3000K. Fixtures should have toughended glass with 60 deg Beam angle with 1350 Lumens. The luminaire shall have IP65 & IK06 protection.The LEDs shall have minimum CRI ≥70.Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC. The luminaire shall have declared life of 50,000 burning hours at L70.LED Driver efficiency should be 85% & proper heat sink for heat dessipation suitable to operate in input voltage range of 140V to 280V (nominal rated voltage – 240V). LED driver shall have output short circuit & over voltage protection inbuilt. Luminaire and Driver must be made in India with same brand. wipro cat ref : LD08-151-060-30-SM or equivalent in Regent /trilux /colour kinetics SITC of Isolated, constant Voltage type 240 W LED Driver enclosure in Extruded Aluminium metal enclosure . Driver shall be made in India compatible for luminaires with silicone potted and IP66 Protected of same make as luminaire. Output voltage of the driver 24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum & sould have large operating input voltage range of 150V to 300V AC(nominal rated voltage – 240V) with 5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection, Thermal Shutdown protection. Wipro cat ref : LG34-240-24-10IP66 or equivalent in Regent /trilux /colour kinetics SITC of Isolated, constant Voltage type 150 W LED Driver enclosure in Extruded Aluminium metal enclosure . Driver shall be made in India compatible for luminaires with silicone potted and IP66 Protected of same make as luminaire. Output voltage of the driver 24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum & sould have large operating input voltage range of 150V to 300V AC(nominal rated voltage – 240V) with 5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection, Thermal Shutdown protection. Wipro cat ref : LG34-240-24-10IP66 or equivalent in Regent /trilux /colour kinetics
