Installation Of Children Playing Equipment/Fountain At Womens /Children Park Kulgam (Balance Work).- 1 (A) : Civil Work For (Construction of Fountain)Earthworkinexcavation by mechanical means for foundation, trencheing,incl.dressingofsidesand ramming of bottom bymechanical meanswithin a lead of 50m and lift 1.5m all kinds of soil. 2 Providing and laying of stone soling (hand packed)incl. backfilling, compactingin foundation trenches and carriage 3 Providing andlaying of cement conc. Of Specified grade of(1:4:8)mix including curing, carriage, but excluding form work. 4 Providing and laying of reinforcement cement conc. Of specified grade(1:1.5:3) mix including curing, carriage, but excluding form work. 5 Providing and laying of reinforcement cement conc. Of specified grade(1:2:4) mix including curing, carriage, but excluding form work. (Circular Bed) 6 a) Centeringandshutteringincludingstrutting,proppingetc.completeincluding removal of form work.(below ground) 7 b) Centeringandshutteringincludingstrutting,proppingetc.completeincluding removal of form work.(above ground) 8 Reinforcemerntfor RCCwork incl.Straightening, Cuttingandplacingin position all complete. 9 Providing and laying gang saw cut of thickness 30 mm , mirror polished pre molded and pre polished machine cut granite stone of required size and shape of approved shade, color and texture laid over 20mm thick base of cement mortar 1:4 (1 cement: 4 Coarse sand ) including grouting the joints with white cement mix with matching pigment , epoxy touch ups etc. complete as per the directions of EIC. 10 Providing and Laying of matt finish vitrified tile of size (300x300x9.8)mm having water absorption less than 0.5% and confirming to IS 15622 of approved make in all colors and shades laid on 20mm thick base of cement mortar 1:4( 1 cement : 4 Coarse Sand) including grouting bthe joints with white cememt mix with matching pigment , epoxy touchups etc., complete as per the directions of EIC. 11 (B):Civil Work For Control Panel (8x4)Earthworkinexcavation by manual means for foundation, trencheing,incl.getting out excavated earth and disposal of surplus excavated eath and includes dressingofsidesand ramming of bottom, within a lead of 50m and lift 1.5m all kinds of soil. 12 Providing and laying of stone soling (hand packed)incl. compacting in foundation trenches and carriage includes backfilling. 13 Providing andlaying of cement conc. Of Specified grade of(1:4:8)mix including curing, carriage, but excluding form work. 14 Providing and laying of reinforcement cement conc. Of specified grade(1:1.5:3) mix including curing, carriage, but excluding form work. 15 Reinforcemerntfor RCCwork incl.Straightening, Cuttingandplacingin position all complete.@50Kg/Cum. 16 Providing and fixing ofclassB medium duty G.l. pipe (100mm dia, 6mm thick) conforming to IS 1239 including welding, fitting elbows, tees flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the MS plate by welding and painting with two or more coats of synthetic enamel paint of suitable shade complete as required. 17 Providing and Fixing of Flange Plates (8x8) and 8mm thickness, including welding with GI pipes & drilling holes etc. 18 Providing and Fixing of Foundation Bolts type J (M20x300)mm, including Nuts and Washers as required thereof. The job includes providing steel rods of appropriate size to fix Bolts properly in concrete. 19 Structural steel work (Welded) in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by EIC.Qty @5kg/Sft 20 Providing and Fixing of ISMC:75 channel sections as per the site requirement and approved by EIC. The job includes cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, as directed by EIC. 21 Providing and Fixing coloured high rib corrugated G. S. sheet (18 swg) roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) including cutting to size and shape wherever required 0.5 mm thick (including projections eaves and soffit).Note: 1.25 mm thick with zinc coating not less than 350 gram/m2. 22 Providing and fixing angle iron frames of mild steel Angle sections of size 25x25x5 mm and 40x40x5 mm for Door. The job including welding of MS flat strips of (25x 3) mm with Angle Iron frame including fixing door and necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 23 Providing and Fixing of Wire Mesh (Mesh size 50x50)mm & wire dia 2.2mm. The job including fixing of wire mesh with flat MS strips welded with angle irons frames as well as covering open portion of truss to ensure proper closing of whole job as direct by EIC. 24 C) Installation of Fountain at Women / Children Park Kulgam(Balance Work)Providing and Fitting of a 10 ft Diameter Ring Conduit usingClass B GI Pipes of 80mm dia (conforming to IS 1239). The assembly shall include holder assemblies with sockets, adapters, spaced at 1ft centre to centre. The scope includes all fabrication, cutting, threading, welding, and installation using appropriate tools and tackles. 25 a) Supply and installation of interconnecting piping in various diameters using GI B Class pipe. The scope includes the cost of cutting, welding, nuts, bolts, bends, elbows, T/Y -joints, sockets, adapters, and other necessary fittings.80 mm 26 b) Supply and installation of interconnecting piping in various diameters using GI B Class pipe. The scope includes the cost of cutting, welding, nuts, bolts, bends, elbows, T/Y -joints, sockets, adapters, and other necessary fittings.65 mm 27 c) Supply and installation of interconnecting piping in various diameters using GI B Class pipe. The scope includes the cost of cutting, welding, nuts, bolts, bends, elbows, T/Y -joints, sockets, adapters, and other necessary fittings.25 mm 28 Providing and Fitting of Support for Ring conduit, Flower Jet conduit and for centre jet nozzle fixed in floor with flange plate, nuts,bolts, washers, strips etc. sufficient to withstand against vibration . Complete job 29 SITC of 12mm Mini Isolation valves with specifications as per IS. 30 Providing and Fitting of Single-stage aerated centre foam jet nozzleof dia 25-40mm capable of handling water height of15 ft. The assembly shall include holder assemblies with sockets, adapters, and ball valves (IS 778), flanges,nuts, bolts as required. The scope includes the supply, installation,cutting, threadingand welding using all necessary tools & tackles and all necessary accessories to ensure a complete and functional setup.MOC:Stainless Steel 316 or equivalentMake: Reputed. 31 Providing and Fitting Clear stream jet Nozzles of 12mm dia (thread size) with hole size of dia 06-08mm capable of handling water height of 15 ft with in built angle adjustment ball & socket joint (IS 778).MOC:- Stainless SteelMake: Reputed. 32 Providing and Fitting of Flower jet nozzle with socket and valve inlet dia of 20-25mm able to achieve water height of 15ft. The assembly shall include holder assemblies with sockets, adapters, and ball valves (IS 778). The scope includes the supply, installation,cutting, threadingand welding using all necessary tools & tackles and all necessary accessories to ensure a complete and functional setup. MOC:- Stainless SteelMake: Reputed. 33 Providing and fitting of 20mm dia G.I pipesfor supply to the sump with all fittings, fabrication, cutting, threading, welding, using appropriate tools and tackles. 34 Providing and fitting of 50mm dia G.I pipes for Drainage from the sumpwith all fittings, fabrication, cutting, threading,using appropriate tools and tackles. 35 Providing and Fitting of waterproof high power LED lights 9W,12V, 9x3 = 27 Watt, color changing RGB / Multicolor made out ofSS 304.Rating IP68.Make: Reputed. 36 Supply, installation, testing, and commissioning of 100A Outdoor Control PanelIP66 Rating ,made up of powder coated metal sheet 12 SWG enclosure with front door ,provision of gland plates for incoming and outgoing cables and double layered doors for locking provision and resricted access. sizeenough to accomodate all the components along with 15kVA Servo Stabilizer. Components of Panel:1.Incomer MCCB 100A TPN2. 100A Aluminum bus bars insulated with epoxy powder coating.3. Variable Frequency Devices(VFD)for motor control enabled with inbuilt SyncD drivers for color changing effects and for dancing of fountain jets : a) 5HP VFD for 5HP Motor 1No. c) 3HP VFD for 3 HP Motor 1 No. d)1HP VFD for 1 HP Motor 1 No.4. MCB TPN 63A for 5HP VFD 1 No.5. MCB TPN 32A for 3HP and 1HP VFD 02 No.6. MCB Single Phase 15A 05 No.7. PLC 1 No.8. DCC SMPS 24/12V DC,KW rating as per requirement.10. LED Light controller 1No. with light console 02 No.11. StandBy Dry SemiAutomatic Starters(5HP 1 No., 3HP 1 NO and 1HP 1 NO .) 12. Indicators, Voltmeters,Ammeters,Selector Switches, Push Buttons, CTs, DBR Resistances, Buzzer, Step down Transformer,Noise Filter panel accessories, power and control wire,temperature monitoring devices, an emergency stop (E-Stop), status and alarm indicators (LED and audible), Push feature to lock any running color chase to fix a color,, and cooling fans or air conditioning for ventilation, indoor panel box with powder coating.13. Interconnection Cabling in Multistrand CU Conductor with required size and ratings as approved by EIC.14. Musical panel with audio system, DMX Controller for dynamic lighting effects.15. Earthing: With G.I.earth pipe 4.5metre long and 40mm dia with masonry encloser in cement mortar, cover plate having locking arrangement on the top,using salt and charcoal/coke for pipe earth electrode as required including excavation & refilling complete as required16. Other necessary items.Note: All the items mentioned above shall be of reputed make and approved by EICand adequate in number to ensurecomplete and functional setup. 37 Supplying, installation, testing and commissioning of Open well submersible Pump with SS body coupled with totally enclosed water filled squirrel cage induction motor, water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation. Make : ReputedCapacity : Not Less than 1 H.PIP Rating: IP68. 38 Supplying, installation, testing and commissioning of Open well submersible Pump with SS body coupled with totally enclosed water filled squirrel cage induction motor, water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation. Make : ReputedCapacity : Not Less than 3 H.PIP Rating: IP68. 39 Supplying, installation, testing and commissioning of Open well submersible Pump with SS body coupled with totally enclosed water filled squirrel cage induction motor, water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation. Make : ReputedCapacity : Not Less than 5 H.PIP Rating: IP68. 40 Supplying & installation of approved make single phase 0.5 HP,50Hz,220V,centrifugal mono-block pump self-priming, connections, solid concrete foundation, MS enclosure as required as per specifications including pipe and connection cable. Make: Reputed. 41 Supplying and laying of 35 sqmm 3.5 core aluminum armoured undergroundcable from main source to control panel.Make: Reputed. 42 Supplying and laying of PVC insulated submersible3 core copper cable 4 sq mm.Make : Reputed 43 Supplying and laying of PVC insulated submersible3 core copper cable 2.5 sq mm.Make : Reputed 44 Supply and Laying of PVC insulated submersible 2 core 1.5 sq mmcopper conductor .Make : Reputed 45 Supplying and laying of PVC insulated multistrand copper cable 1 sq mm.Make : Reputed 46 Supplying and laying of PVC insulated multistrand copper cable 2.5 sq mm.Make : Reputed 47 Supply and laying of HDPE PLB conduit of 40mm dia for wires .Make : Reputed 48 Supply and laying of HDPE PLB conduit of 12mm dia for lights .Make : Reputed 49 Providing and Fitting of SS Water Strainers for each pump and at the inlet to the sump with all necesarry fittings. 50 SITC of Class D Audio power amplifier IP68 rating (300watt) OL protection / OV protection / High-fidelity (Hi-Fi).Make:Reputed. 51 Providing and Fitting of 50Watts speakers matching with amplifiers complete as per standard specifications.IP 67 ratingMake:Reputed. 52 Supply, Installation, Testing and Commissioning of 15 KVA oil cooled servo controlled Automatic Voltage Stabilizer with digital micro processor based controller with Copper winding, oil cooled, unbalanced type with bypass arrangement of power drawing conforming to IS 9815 with an input voltage range (270V-460V AC) and output voltage (415V AC +/- 2%), overload capacity 120%, operating frequency 50Hz including specified cables on input and output side along with suitable protection mechanism including earthing, cement concrete bed and canopy for outdoor installation.Make:Reputed. 53 D)Installation ofChildren Playing Equipments at Women / Children ParkKulgam (Balance Work)Supply and Installation ofsee-saw withfollowing specifications:Seating capacity : 4 people (combined weight 300kg )Dimensions: ≥ (8 x 3 x 2 ) ftMaterial of construction:Main frame: Mild Steel (M.S.) pipe,class B, 40 mm boreSeats: Fiberglass Reinforced Plastic (FRP) with a thickness of at least 6 mmBase plate: M.S (1 x 1) ft and 8 mm thick, secured and anchored with 16 mm diameter anchor bolts Pivot/fulcrum; Heavy duty steel with a sealed bearing system. 54 Supply and InstallationofChildren Quadruple PlayingStation(consisting of different types of slides viz wavy slide, spiral slide, straight tube slide and a stair with HDPE grip ) of approved brand and manufacture of size not less than ( 30 x 20 x 12 ) ft .With a base plate 1x1 ft and8 mm thick fixed and anchored with 16 mm dia Anchor Bolts . Slide length ≥ 15 Feet.MOC: Vertical Pipes 80 NB GI Pipes class B heavy duty, FRP for slides not less than 6 mm thick.Forinterconnections MS class B ofdiameter not less than 30 mm or equivalent section.Theplaystation should be able to bear a loadof minimum 2000 kgs. 55 Supply and Installation of Duck merry Go roundsix seaterof size Dia ≥ 2.5 m, Height ≥ 1.3 m, seat height ≥ 0.5 mmade ofclass B MS pipe of diameter 50 mm fixed with rotating bearing(heavy duty seal, permenantly lubricated roller bearing)with a base plate of size (1x1) ft and 8mm thick fixed and anchored with 16 mm dia anchor bolts. 56 Supply and Installation of dual set Chain Swing with FRP seats ofthickness not less than6mm andholding weight upto 100 Kgeach of size 10 x 4 x 8 made out of 80 mmGI pipe class C , with base plates(1x1) ft and 8 mm thick fixed and anchored with 16 mm dia Anchor Bolts. 57 Supply and Installation of dual set of 3 set slider of approved brand and manufacture of standard size made out of 80 mm dia MS pipes with 10 mm attached chain with base plate 8 mm thick fixed and anchored with 16 mm dia Anchor Bolts. 58 Supply and Installationof M SMonkey climber ofHeight ≥ 2.5 m,Breadth ≥3m,rung spacing 0.3m-0.4m , ground clearenceof 0.3 m( from lower rung to ground)ofGI class B pipe of diameter not less than 50 mmfor vertical supports and diameter not less than 25 mm for interconnecting pipes placed uniformly. Frame shall be duly anchorbolted(16mm dia) with the foundation. Load bearing capacity ≥300 kgsClimbing grips: HDPE. 59 Supply and Installationof a 14 ft diameter Jumping Trampoline featuring a minimum frame height(ground to round frame) of 1 m and a jump height of no less than 8 ft. The trampoline shall be equipped with galvanized steel springs(heavy duty not less than 90 in number & of Size 7-8 inches,a heavy-duty polypropylene jumping mat, and high-density foam padding encased in thick vinyl fabric with closed-cell foam for durability and intensive use. The safety enclosure net must have a minimum height of 7 ft and shouldbe securely attached to extended U-type vertical frame supports. The frame should be constructed from high-tensile galvanized steel with a minimum diameter of 60 mm and a wall thickness of 5 mm, supporting a load capacity of at least 300 kg. 60 Providing and Laying of RCC in foundation for anchoring of childrenPlaying Equipments in 1:1.5:3 Mix . This includes earth work in excavation, centering and shutteringcomplete job.Reinforcement @50kg/cum.
