}

Tender For Road Safety Work On Kharkhauda To Mohiuddinpur Geja Siwalkhas Road In Meerut District - Providing And Laying Hot Applied Thermoplastic Compound 2.5 Mm Thick I/C Reflectrorising Glass Beads @ 250.00 Gm Per Sqm Area Thickness Of 2.5 Mm Is Exclusi, meerut-Uttar Pradesh

Public Works Department has published Tender For Road Safety Work On Kharkhauda To Mohiuddinpur Geja Siwalkhas Road In Meerut District - Providing And Laying Hot Applied Thermoplastic Compound 2.5 Mm Thick I/C Reflectrorising Glass Beads @ 250.00 Gm Per Sqm Area Thickness Of 2.5 Mm Is Exclusi. Submission Date for this Tender is 03-03-2025. Safety Consultancy Service Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

47951886
Tender For Road Safety Work On Kharkhauda To Mohiuddinpur Geja Siwalkhas Road In Meerut District - Providing And Laying Hot Applied Thermoplastic Compound 2.5 Mm Thick I/C Reflectrorising Glass Beads @ 250.00 Gm Per Sqm Area Thickness Of 2.5 Mm Is Exclusi
Open Tender
Indian
Uttar Pradesh
Meerut
03-03-2025

Tender Documents

Tender Details

Tender For Road Safety Work On Kharkhauda To Mohiuddinpur Geja Siwalkhas Road In Meerut District - Providing and laying hot applied thermoplastic compound 2.5 mm thick i/c reflectrorising glass beads @ 250.00 gm per Sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all material , labour and T&P etc as per Table No.800-3 of clause MORTH 2 Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 3 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting Type IV vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 50 cm x 60 cm x 60 cm, 60 cm below ground lvel as per approved drawing (Shavron) 4 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting Type IV vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 60 cm Circular with diffinitation plate (20 cm x 60 cm) 60 cm below ground lvel as per approved drawing (Speed Limit) 5 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting Type IV vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 90 cm x 60 cm, 60 cm below ground lvel as per approved drawing (HAZARD MARKER) 6 Reflective Raised Pavement Marker Providing and fixing of raised pavement markers (Cat Eye) Type x-ASTMD-4956-04 Avery Dennision/3m(USA Make) having moulded body of polycarbonate, ASA, HIPS or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. The length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of Category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent.With 7 years warranty. Rate shall be inclusive of all taxes, royalty, VAT etc. All T&P/ machine material and labour required for proper completion of work. including all labour, material, T&P, taxes & labour cess but excluding GST (as SI no.9 New item )

Key Value

Document Fees
INR 2714 /-
EMD
INR 547000.0 /-
Tender Value
INR 69.33 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail