Furniture supply and fixing and other development work in District Collector Office main meeting hall - SN Particulars LxBxH Pefnot af trườn the công thường rong nhong walpeal power presul tren MS sheet and pain new mating of grale ar por 15 277 and conting angle of reser thecaring with dachte 12 og frendothe 220 Wem of maand length, and other end of are hurger horg 145409een nating of the tạ 1200 come to which the conting setentrem thack boten wedge of en watered at Caring of 10 Sen 40mm come to centre shall be fixed in a deter corps channel with commoting caps made of 2 ng song fing the gym board with ceslag tion and cham tak 27en high tuning tanges of 20m and 30 kg. of ringted to wallation with the hulp of reat pla am when long anal inchadeng jenting and fi hack troch of sence and square edges of the board wat reversended filler, jorna enter uste behun x per manufactures spesification and alv in the cont of ruling openings the light fittings, gifts, diffuser, ou made with hare of pereres chatrehly food all compriate as per drawing and specifinan of the Engon charge he inchaing the ont of punting with 125 mm thick dy board conforming to 11. 2095-Part 1, 1 2 5.60 x 13.500 Providing & Foxing in position. Carpet more than 800 gm, mad with 100% stam proof thees of approved make along with 5mm underlay as per Architectural & Acousticul Design & Instructions & Complete in sil aspects including all materials Inbour, finishing etc complete 1 x 560 x 13.500 3 Supply Imstatason. Testing and Comissioning of 150 certified company made Ar Cooled Hi Wall spil type Air conditioners with latest star rating system as per BEE amended upto date complete with indsor unit(IDU), Our door unit (ODU) surface concealed copper Refrigerant piping with msulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mt (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) R-32/R 410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz 1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll/rotary compressor Min 5 year OEM warranty both compressor and PCB. NABL accredeated as per ISISO/IEC 17025 standards/CPRI ERDA lab testing reports as per IS 1391(Part-2) 2018 with OEM certificate must submitted to engineer in-charge All as per pre approved by Engineer in-charge. All as per pre approved by Engineer in charge For additorial technical parameters of products/work refer Annexure A attached with this BSR Non Invertor Type 1.8/2.0 TR with 3 star rating of BEE (ISEER not less then 35) 4 Podium The Podium Size shall be 750 mm x550mm x 1100mm hl Shall be made up of 16 mm thick paper laminated MDF board having 1 nos PVC cable manager Shall have input and cutput cable manager made of PVC The front of podium wilt be used for engraving the name of respective medical college which will be told to the 11 (Approved by Rajasthan Medical Education Directorate, Jaipur) Providing & Frung in position, Acoustical Paneling made from 12mm thick Agro wood strips of 50, 75 7 100 mm width on 50 x 50 mm Sal-wood frame of 600 x 600 c to c having supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm thick with approved coloured fabric on strips side & chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings/finishing items. Melamine Polish & Scaffolding, as per Architectural & Acoustical Design & instructions & Complete in all aspects including all materials labour, finishing etc complete 2 2 5.6 3.00 135 3.00 5 Providing and fixing 12mm thick panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick Fire retardant plywood of lamination painting quality conforming to IS 5509 7 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS 2046 Type S including cost of adhesive of approved quality 1.5 mm thick Item No. 4 to 20 (Rate approved by CE PWD Rajasthan Jaipur letter No. D-808 Date 06.03.2019) 8 Supply & Installation of Chairman Unit with fixed microphone and flexible stem. Priority button for chairman mitrophone, Optical Optional chime tone facility for preveding chairman announcement with two headphone sockets, built in loudspeaker to prevent acoustic feedback, the built in loudspeaker to prevent acoustic feedback, the built in loudspeaker is automatically muted when the microphone is on/off button. Chairman make unit should have a frequency response 400 Ha to 10 Hz including making Connection, testing etc as required. Makes Bosch/ Dis (shure)/Televic Audio Technical. (Rate approved by CE PWD Rajasthan Jaipur letter No. D-808 Date 06.03.201) 9 Supply & Installation of Conference Deligste mike unit with flexible stem. which is easily adjustable to allows two people to use the same delegate unit To prevent aroustic feedbark, the built in loudspeakers automatically muted when the microphone in in, huilt in volume control for headphone, two headphone socket, microphone on/off button, loudspeake automatically muted when microphone is on, conference Delegate mike uni should have a frequency response 400 Hz to 10 KHz including makong connection, testing etc as required. Malors Bosch/ Dis (shure)/ Televic/Audio Technical (Rate approved by CE PWD Rajasthan Jaipur letter No. D-808 Date 06.03.2019) 1 10 Supply & Installation of Conference Control Unit (CCU) for givin power the chairman unit ans. Deligate unit with ushult a hand equilizer, unat compung of knobs al 250 Hz, 2 Khz and & kha, Volume control far 1 Ma mpat Pin DIN Connector for loop through, should also consusta Miersphtune input with XLR Connector with rated output impedance of 100 mm and system should have capability to content sup to 50 мачте ushing makign connection, rating ett an inquierd Maersk Teler/ Audas Techne al (Rate approved by CE PWD Rajasthan Jaipur letter No. D-808 Date 06.03.2019) Supply & Installation of Amlifier Unt for Providing a crisp call or clear music with 4 Microphone/ line inputs, plus music source input, announcement only output. 3 wire volume override, wide range of output power (60, 120 and 240 watts) with Mains power supply 230 VAC 10%, 50 Hz (reduced Power a lower mains), Inrush current 20A Power Consuption 120W. Frequency response (Line) 80 Hzto 18 KHz (+1/-3 dB@-10 ref rated output) Frequency response (Misc) 80 Hz to 18 KHz (+1-3 dB-10 ref rated output) Distortion 1% rated outpout power, 1KHz Bass Control Max 8 dB Treble Control Max 8dB including making connectionetc complete in all respect Makes Bosch/ Da (shure)/ Televic/ Audio Technica (Rate approved by CE PWD Rajasthan Jaipur letter No. D-808 Date 06.03.2019) 12 SITC of Speaker Unit Maximum power 12 W with (12/6/3/1 5W) SOUND Pressure level at reted power/1W (1 Khz, 1m) 100 dB/89 dB 103dB/ 89 dB opening angle at 1KHz/4 KHz (6dB) 180 degree/ 54 degree 180 degree/ 58 degree Effective frequency range (-10 dB) 55 Hz to 20 Khz, 55 Hz to 20 khz rated Voltage 70V) 100V, 70 V/100 V Rated impedance 418/833 Ohm 208 417 Ohm Connector 3-pole screwterminal block including makign connection etc complete in all respect Maes Bosch/ sure/ Audio Technical JBL/DIS/Bose (Rate approved by CE PWD Rajasthan Jaipur letter No. D-808 Date ДЕ АЗ 20191 13 Supply & Installation of UHF hand Cardless mike with frequency rage UHF770-870 Mhz with complete receiver unit including making connection etc complete receiver unit including making connection etc complete in all respect. Make Bosch/ JBL/ Electrovoice (Rate approved by CE PWD Rajasthan Jaipur letter No. D-808 Date 06.03.2019) 14 Supply & Configuration of Cordless Colelr Mike complete receiver unit including miking connection etc complete in all respect Make Bosch/ JBL Electrovoice Supply & Laying of 8 core Shielded cable for Extension cables for contribution unit control Unit interconnection including making connection testing etc as required Make Bosch/ Shure/ Televic 1000 1 Supply & Installation of Audio Recorder Player for recording the conference talks with recordign capacity of aprox 32 hours complete in all respect Make Sony/ Bose/ Shure Supply & laying of 2 Core x 15 Sqmm Shielded speaker cable including making connection testing etc as required Make Finolex/polycab/ RR kabel/ Kramer/ Belden 900 Supply & testing and commissioning of HDMI Cable High speed HDMI cables 25M TR RESOLUTION SUPPORTED 480, 480p, 720p, 1080 1080p, CONDUCTOR AWG: 3-25th cables use 26 AWG (7/0.16): 35 & 50 m use 24 AWG (7/02) SHIELD, dual overall shield against EMVRFI interference. (a) Al-Mylar, (b) tinned copper, CABLE OD (MM). 3-25 ft. 7.6 mm, 35 & 50 ft. 8.3 mm MOLDED connectors Yes, GOLD-PLATED CONNECTORS yes HDCP COMPLIANT Yes. FLAME TEST CL2 including making connection etc complete in all respect Make Sony Panasonic BenQ 19 Suppily & Installation of Din Sockets. Duly Mounted on the Conference Table 20 Supply Testing & Commissioning of LCD Projector, Brightness 4100 lumens. Screen Size 0.76-762 m (30-300 inches) diagonally. 43 aspect Rato. Resolution 1024 x 768 pixels, (input signals that exceed this resolution will be converted to 1024 x 768). Lamp Power consumption 30 W (6W when standby mode set to Normal 0.5 W When standby mode set to Eco1), Panel Size 16 mm (0.63 inches) diagonal (4 3 aspect ratio, pixel 786 432 (1024 x 768) pixels, HDMI, VGA, VIDEO AUDIO LAN, USB Dimensions (WxHxD) 335 mm x 96 mm (when legs at shortest Position) 252 mm including makign connection etc complete in all respect Make Sone/ Panasonic/ BenQ Supply & Installation of Motorised screen as per detailed techncial specificabon size aprox 8x6 ft High Quality Amencan MW fabric, Fabric, Hassle Free Instalaltion, Dual Remote IR & RF with control panel. Heavy Duty Synchronous Motor, including making connection etc compite in all respects Make Suviral Draper/ Liberty Supply & Testing and Commissioning of Ceiling mounting kit 3 to 5 ft, ceiling mount capacity Externaly flexible design allow to fit almost all popular Projectors Quick release universal mount for projector, 360 degree Rotate for Projector, +20 degree Tilt and Roll for Projector. Adjustable-height from 1142 to 32 (290 mm-810 mm), Cable routing channel for a clean look, cable managemetn including fixing with fastner etc are required complete in all respect SITC of 40° Flat Screen HD LED TV with remoe control and wall mount unit floor stand complete with making connections etc as required Make Sone/LG/ Panasonic P&F of IP20 LED ceiling/recessed/suspended mounting light fixture made from CRCA sheet steel housing, high purity/transmisivity diffuser for uniform light distribution High efficiency driver electronics having efficiency >85% and in compliance to IEC standards (Integral with light fixture) Power Consumption of 40W/50W/60W-3000/3300/4200 lumens, System lumen efficacy of 70-80 Im/Watt output suitable for 2x36WFTL/2x35W CFL/3x36W CFL light fixtures, life time of 50,000 burning hours with 70% initial lumens maintained. CCT 3000°K, 4000 K & 6000K Fixtures shall be CE compliance Recessed Mounting 36W LED light fixture 2x2 with acrylic/prismatic front cover Providing. Supplying & Installation of Medium back breathable mesh fabric upholstered Ergonomic revolving chair 1. Medium Rise revolving chair 2. Dimensions of Chairs a) Seat Width 500 mm +/- 10mm. Depth 480mm -10mm b) Back Rest Width 420mm -10mm Height from Seat 550mm +/-10mm Minimum Seat Height 470mm +/- 10mm & Maximum Seat height 570mm+ 10mm 3 Seat shall be made up of 12 mm thick hot pressed ant-termite water resistant plywood, upholstered with Breathable Mesh fabric and moulded polyurethane foam The polyurethane foam density shall be 45+/-2kg/m3 4. Chair back shall be made of 40 mm thick edge of PVC moulding with Breathable Mesh upholstery. The seat and back are arrested together with a 9.0cm (W) spine made of 08cm thick HR steel. Breathable Mesh Chair Backrest Moulds shall provide adequate back support, and makes the long hours of seating comfortable 5 PU padded Adjustable handles (300mm W75mm D) shall operate through push button 6. Chair shall have regular tit mechanism feature: 360 degree revolving type with single position locking & Chrome base fixed with 5 nos. Nylon castors. The pedestal is 67 ficm pitch-center dia (77.0 cm with castor). The twin wheel castors are injection moulded in Black Nylon All work complete induding Fabrication, nailing, screwing, pasting, transporting loading unloading placing, frishing, sefting, etc complete in all due respect as per terhnical specifications standants, directions and satisfaction of Enginee Incharge 1 1 10 Medium back mesh revolving Conference Halls chair 1 Medium Rise revolving chair 2 Dimensions of Chairs a) Seat Width 500 mm + 10mm, Depth 480mm +/-10mm b) Back Rest Width 420mm/10mm, Height from Seat 550mm +/- 10mm c) Minimum Seat Height 470mm +/- 10mm & Maximum Seat height 570mm/10mm 3.Seat shall be made up of 12 mm thick hot pressed and termite water resistant plywood upholstered with Mesh fabric and moulded polyurethane foam The polyurethane foam density shall be 45+/-2kg/m3 4 Chair back shall be made of 40 mm thick edge of PVC moulding with Mesh unholstery The seat and back are arrested together with a 90cm (W) spine made of 0 Bom thick HR steel Netted Chair Backrest Moulds shall provide adequate back support and makes the long hours of seating comfortable 5. PU padded Adjustable handles (300mm W75mm D) shall operate through push button 6. Chair shall have regular sit mechanism feature: 360 degree revolving type with single position locking & Chrome base fixed with 5 nos. Nylon castors. The pedestal is 67.0cm pitch-center dia (77.0 cm with castor). The twin wheel castors are injection moulded in Black Nylon All work complete including Fabrication, nalling, screwing, pasting, transporting. loading unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge. 27 CONFERENCE TABLE Providing and Fuing of U-Shape conference table of 750mm in width and height made out of 19 mm the commercial board structure The table top is made out of 19 mm the double layered ply booard all finished with 1 mm thk laminate as per design & drawing Rate are include necessary electrical conduit & switch boxes complete or as per direction of engineer in charge
