Tender For 3016/3 Pannuwala Se Karnawala Jabdi Marg Tak - Construction Of Sub Grade And Earthern Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads Transporting To Sites, Spreading, Grading To Required Slope And Compacted , moradabad-Uttar Pradesh

Tender For 3016/3 Pannuwala Se Karnawala Jabdi Marg Tak - Construction of sub grade and earthern shoulders with approved material obtained from borrow pits with all lifts and leads transporting to sites, spreading, grading to required slope and compacted to meet requirement of table 300.2 including all labour, material, T&P etc complete but excluding GST. 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 Kn in stages to proper grade and camber applying and brooming stone screening / binding material to fill up the interstics of coarse aggregate, watering and compacting to the required dencity. Grading 3 as per technical specification clause 405 including all labour, material, T&P etc complete but excluding GST. 3 Providing and applying Tack coat with bitumen VG-10 using Bitumen pressure distributer @0.30 kg. per sqm on the prepared dry and hungry bitumenious surface cleaned with Hydraulic broom as per Technical specification Clause 503.including all labour, material, T&P etc complete but excluding GST. 4 Providing, laying and rolling of open graded P.C. of 20mm thickness composed of 13.2mm to 5.6mm aggregates eigher using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previously prepared base i/c mixing in a suitable plant, laying and rolling with a three wheeld 80-100 kN static roller capacity, finished to required level and gredes to be followed by seal coat of eigher Type C as per Technical Specification Clause 508including all labour, material, T&P etc complete but excluding GST. 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510including all labour, material, T&P etc complete but excluding GST. 6 Excavation in foundation in ordinary soil (loam clay and sand) including lift upto 1.50 M and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation, including cost of material, labour,Royalty, labour cess, T&P etc and other taxes but excluding GST. 7 Cement Concrete with 4 cm gauge with Stone Ballast coarse sand & Cement in proportion 8:4:1 in foundation proper completion of the work including cost of material, labour,Royalty, labour cess, T&P etc and other taxesbut excluding GST S.I. No. 281 8 R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:2:4 in lintels of doors, windows and sunshades excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse but excluding GST. 9 Mild steel or TMT Bars(Fe-500D grade or higher) orHYSD Bars or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) brought to required shape as necessary including bending for proper completion of the work and including supply of all steel. but excluding GSTS.I.No. 504.

INR 854 /-

INR 200000.0 /-

Refer document