|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Stone Aggregate ( Single size) 40 mm nominal size |
| 3 | Stone Aggregate(single size) 20 mm nominal size |
| 4 | Coarse sand zone III |
| 5 | Portland Cement |
| 6 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 7 | Vibrator (Needle type 40 mm) |
| 8 | Stone for masonry work |
| 9 | Stone Aggregate(single size) 10 mm nominal size |
| 10 | wall form panel 1250x500 mm |
| 11 | Corner angle 45x45x5 mm 1.50 m long |
| 12 | 100 mm channel shoulder 2.5 m long |
| 13 | Double clip (bridge clip) |
| 14 | Single clip |
| 15 | M.S. Tube 40 mm dia |
| 16 | Structural steel such as tees, angles, channels and R.S. joists |
| 17 | Red oxide Zinc chromate primer |
| 18 | Adjustable span ESO+SI (2.35-3.40) |
| 19 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 20 | Beam clamp 300-380 mm (450-1070 mm) |
| 21 | Second class kail wood in planks |
| 22 | Second class kail wood in scantling |
| 23 | Hollock ballies 125 mm diameter |
| 24 | Wall form panel 1250x450xmm |
| 25 | Corner angle 45x45x5 mm 2.50 long |
| 26 | Column clamp 450x1070 mm |
| 27 | Prop 2 m (2-3.5m) |
| 28 | Twisted steel/deformed bars |
| 29 | Solid blocks of size 30x20x15cm |
| 30 | Anjili wood scantls |
| 31 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 32 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 33 | Bright finished or black enameled mild steel screws 40 mm |
| 34 | Bright finished or black enameled mild steel screws 20 mm |
| 35 | Anjili wood planks |
| 36 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 37 | Flats up to 10 mm in thickness |
| 38 | Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles |
| 39 | 200 mm Aluminium aldrop |
| 40 | Iron hooks & eyes 100 mm |
| 41 | Brass hard drawn hooks and eyes 150 mm |
| 42 | G.I pipes 50 mm dia |
| 43 | Mild steel tubes hot finished welded type |
| 44 | Welding by electric plant |
| 45 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
| 46 | Wire nails |
| 47 | GI trafford profile sheet 0.35mm thick |
| 48 | Bitumen washer |
| 49 | Stainless steel screws 50 mm |
| 50 | Mild Steel round bar above 12 mm dia |
| 51 | Oxidised mild steel tower bolt (barrel type) 200x10 mm |
| 52 | Oxidised mild steel screws 30 mm |
| 53 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 54 | Chromium plated Brass screws 25 mm |
| 55 | Fine sand (zone IV) |
| 56 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 57 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 58 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 59 | Plastic emulsion paint |
| 60 | Synthetic enamel paint in black or chocolate shade |
| 61 | Vitreous China orrisa type w.c. pan size 580 mm |
| 62 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 63 | 100 mm S.C.I. trap with vent heel |
| 64 | Vitreous china flat back wash basin 550x400 mm |
| 65 | 15 mm C.P.brass tap |
| 66 | C.P. brass waste 32 mm |
| 67 | C.I. bracket for wash basin and sinks |
| 68 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 69 | PVC pipe 25 mm outer dia . 12 kgf/cm2 |
| 70 | PVC pipe 110 mm outer dia 6kgf/cm2 |
| 71 | PVC Elbow 110 mm dia |
| 72 | PVC bend 110 mm dia |
| 73 | PVC Tee 110x110x110mm dia |
| 74 | PVC vent cowl 110 mm dia |
| 75 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 76 | PVC end cap 63 mm dia |
| 77 | PVC end cap 110 mm dia |
