Tender For Provision Of Perimeter Lighting At Kolhapur Airport (Phase-I).; 1 Supply of 6 mtr height hot dip galvanised octagonal poles with 130 mm bottom (A/F) and 70 mm top (A/F) made of 3mm thick HT sheet along with base plate of size 200mm X 200mm X 12mm thick welded to bottom of the pole having lockable Terminal box, gasket along with4 Nos. TS-600 foundation bolts including template, providing bakelite sheet with stud type 32 A heavy duty 4 pole connector, DIN Rail for mounting of MCB in the terminal box etc. complete as required. 2 Supplying and fixing of 1 metre long bracket with 300 mm long ERW pipe suitable to fix on 70 mm top (A/F) Octogonal pole and mounting 45 W LED street light fitting including welded cap, stiffner, nuts & bolts (3 Nos, M10 E.R.W.) and washer etc. complete as required.Single Arm 3 Supplying and fixing of 1 metre long bracket with 300 mm long ERW pipe suitable to fix on 70 mm top (A/F) Octogonal pole and mounting 45 W LED street light fitting including welded cap, stiffner, nuts & bolts (3 Nos, M10 E.R.W.) and washer etc. complete as required.Double Arm 4 Supply of 45 W LED type Street Light Luminaire with control gear, made of pressure die cast aluminium housing with heat resistant toughened flat glass/polycarbonate cover and minimum IP 65 protection, suitable for operation in 140-270 V, 50 HZ AC supply and confirming to the specification specified in the tender document with all accessories etc. complete as required. 5 Supply of indoor surface mounting 10 W (nominal capacity), 600 mm length LED light fitting, complete with LED tube rod, accessories etc and suitable for use on 230 volts, 50 Hz, single phase,A.C. supply complete as required. 6 Supply of surface mounting 10 W (nominal capacity), IP 65, Bulkhead LED light fitting, complete with accessories suitable for use on 230 volts, 50 Hz, single phase,A.C. supply complete as required. 7 Supply of 300 mm sweep wall fan having Aerodynamically designed, Balanced Blade, suitable for use on 230 volts, 50 Hz, single phase,A.C. supply etc. complete as required. 8 Supplying and fixing DP sheet steel enclosure on surface/ recess complete as required. 9 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.(a) Group C 10 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 11 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 12 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) Double pole 13 Erection of 6 mtr. height street light pole of above S.No.1including making suitable cement concrete foundation, excavation and refilling etc. complete as required as per OEM approved design. 14 Installation, testing and commissioning of street light fixtures on existing street light pole of height not more than 6 mtr. complete with providing and laying of 3 x 1.5 sqmm PVC insulated flexible copper contuctor cable from terminal box to fitting, connections etc. as required. 15 Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting/wall fan, complete with all accessories including connections etc. as required. 16 PTTAPANEL Design, manufacture, supply, installation, testing and commissioning ofoutdoor compartmentalized type Panel 50 kA short circuit breaking capacity, having panel of suitable size, bus bars with SMC/DMC supports, made of 14 SWG CRCA sheet steel, totally enclosed, IP-65, free standing, floor / wall mounting, powder coated painting, suitableto the existingspace, operation on 3 phase and neutral, 415V, 50 Hz AC system with bus bars, G.I flat Earth strip on both side , Removable gland plates at bottom with suitable size of predrilled holes for cables, cable interconnections,wiring, earthing,rotary handles & spreader links to all MCCBs, powder coated painting etc. with following items and installation on suitable channels /elevated concrete foundation as per site requirement etc. complete as required.INCOMER(i) MCCB of 125 Amps, 35 kA, 4 pole, microprocessor based release with Rotary operating mechanism, shunt trip, auxiliary contact etc.- 02 Nos(ii) Indication Lamps, LED type, R.Y.B and breaker ON, OFF, TRIP lamps- 02 Sets(iii) Digital Mulit functional meter suitable range for 3 phase, 4 wire with LED display and selector switch along with MCB of suitable ratings- 02 Sets,for 3 phase 4 wirewith LED display and selector switch and cast resin CT ratio programmable and auto ranging along with 3 numbers of class 1.0, 15 VA suitable range CTs -02 Sets(iv) Electrical and mechanical interlocking arrangment between above 02 nos. incomers so that supply to busbar to be fed by only 01 incomer at a time.BUSBAROne set of 250 AmpTPN aluminium bus bars of 35 KA capacityOUTGOING(i) 03 Nos. FP, 63 A, 35 kA MCCB with extended terminal with real time timer of suitable rating, contactors and direct rotary handle etc as required(ii) 01 No. FP, 125 A, 35 kA MCCB with extended terminal & direct rotary handle etc as required(iiI) 02 Nos. FP MCB 32 Amps, directly connected to bus bar in separate compartment 17 Supply of following sizes of XLPE insulated and PVC sheatheel XLPE aluminnum conductor armoured cable of 1.1KV grade conforming to IS 7098 (Part-I) with up to date amendments as required. 4 X 16 Sq.mm 18 Supply of following sizes of XLPE insulated and PVC sheatheel XLPE aluminnum conductor armoured cable of 1.1KV grade conforming to IS 7098 (Part-I) with up to date amendments as required. 4 X 25 Sq.mm 19 Supply of following sizes of XLPE insulated and PVC sheatheel XLPE aluminnum conductor armoured cable of 1.1KV grade conforming to IS 7098 (Part-I) with up to date amendments as required. 3.5 x 240 Sq.mm 20 Supply of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II etc. , complete as required90 mm dia (OD-90 mm & ID-76 mm nominal) 21 Supply of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II etc. , complete as required50 mm dia (OD -50mm & ID 40 mm nominal) 22 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required100 mm dia. 23 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required50 mm dia. 24 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 185 sq. mm and upto 400 sq. mm 25 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL / HDPE pipe as required.Upto 35 sq. mm 26 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL / HDPE pipe as required.Above 185 sq. mm and upto 400 sq. mm 27 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) 28 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 29 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm) 30 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (Excluding Gland) 31 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.3.5 X 240sq. mm (62mm) 32 Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3.5 X 240 sq. mm 33 Laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.90 mm dia (OD-90 mm & ID-76 mm nominal) 34 Laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.50 mm dia (OD -50mm & ID 40 mm nominal) 35 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. 36 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 37 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 38 Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 39 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required 40 Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres. 41 Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres. 42 Providing and laying in position reinforced cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in etc. as required (excluding reinforcement). 43 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
