Supply &Amp Fixing Of Furniture At 132 Kv Gss Ajnoti - Supply And Fixing Of Office Table Of Size 1665 Mm (L.) × 900 Mm (W) × 750 Mm (Hi). The Top Panel Shall Be Made From 25 Mm Thick Pre - Laminated Boards With 2 Mm Thick Pvc Edge Beading On All Sides. , Kota-Rajasthan

Supply &Amp Fixing Of Furniture At 132 Kv Gss Ajnoti - Supply and fixing of office table of size 1665 mm (L.) × 900 mm (W) × 750 mm (HI). The top panel shall be made from 25 mm thick Pre - laminated boards with 2 mm thick PVC edge beading on all sides. Under structure shall be made from 0.9 mm thick powder coated 50 microns CRCA sheet & MS Tubular Frame of size 25.4 mm square, thickness 1.2mm MS ERW tube. Modesty panel shall be made from 0.9 mm thick powder coated 50 microns. The table is general office working table having M.S. drawer units (One drawer/box & one filing drawer at one side & one three box drawer unit on other side, 10 lever cam lock on storage unit. Moving through channel slider on both sides. The under structure should be covered from three side with 0.9 mm thick powder coated 50 microns CRCA sheet. All steel components will be powder coated epoxy polyester paint and bottom rubber stoppers on all legs. The weight of the frame should not be less than 35 kg. 2.00 Each 2 Supply and fixing of office table of size 1199mm (L) × 590 mm (W) × 735 mm (H). The top panel shall be made from 25 mm thick prelaminated particle board with 2mm thick PVC edge beading on all sides. Under structure shall be made from 0.9 mm thick powder coated 50 microns CRCA sheet & MS Tubular Frame of size 25.4 mm square thickness, 1.2 mm MS ERW tube. Modesty panel shall be made from 0.9 mm thick Powder coated 50 microns. The table is general office working table having M.S. three box drawer unit on one side 10 lever cam lock on storage unit. Moving through channel slider on both sides. The under structure should be covered from three side with 0.9 mm thick powder coated 50 microns CRCA sheet.. All steel components will be powder coated epoxy Polyester paint and bottom rubber stoppers on all legs. The weight of the frame should not be less than 22 Kg. 2.00 Each Supplying and fixing of Computer table of size: 1200 x 600 x 750 cm, Top of table finished with 25mm thick pre laminated particle board with 2mm thick PVC edge banding all around. Under structure shall be made from 0.9 mm thick powder coated 50 microns CRCA Schedule-G Name of work :- Supply & Fixing of furniture at 132 KV GSS Ajnoti 3 sheet & MS Tubular Frame of size 25.4 mm square thickness 1.2mm MS ERW tube. Modesty panel shall be made from 1.0 mm thick powder coated 50 microns. One drawer of 40 x 50 x 18 cm size, one cupboard with self, CPU Stand, Foot Rest, Key board tray fitted with necessary fittings such as wire / cable manager, auto closing hinges, stainless steel handle, multipurpose lock, sliders, necessary bushes etc. with fully closed back panel. The weight of the frame should not be less than 22 Kg. 1.00 Each 4 Supply and fixing of Cane Chair with Armrest. The seat & back shall be made from seasoned wood, knitted with cane and finished with synthetic paint (black). The dimensions of overall chair shall be minimum 58 cm (L) x 88 cm (H) x 57.0 cm (D). The armrest tube shall be made of M S pipe dia 25mm x 1.6mm with wooden handles molded from black polypropylene. The under structure assembly shall be a cantilever type frame made of pipe dia 25mm x 1.6mm thick MS ERW tube. Overall Dimensions of Chair shall be of standard height of seat 450 mm from floor level. All steel components shall be powder coated epoxy polyester paint. ( Overall size = 58×57×88 Cm (LxDxH). 6.00 Each 5 Supply and fixing of visitor chair with scat/back made up of dimensions 51.0 cm (W) × 48.0 cm (D) (approx.) and overall height of Chair 90.0 cm (approx.) with a seat height of 46.0 cm (approx.) ; Overall width and height of foam pedestal 45.0 cm (W) x 45.0 cm (H) (approx.) made out of 40 density P.U. foam over 18mm thick plywood upholstered with tapestry matty fabric, soft PU foam armrests and tubular frame of CR capsule pipe size 1 x 1.5 of 16 SWG. 4.00 Each 6 Supply and fixing of steel side rack of size 750mm (L.) × 380 mm (W) × 900 mm (H) fitted with 3 Nos steel sheet having exposed edge of sheet bend up to minimum of size 20mm having thickness 0.8mm with 4 slotted angles of sizes 35X35X1.8mm fitted with corner plates and Hex Nut, Bolt, rubber stopper at bottom of legs. All steel components shall be powder coated with epoxy polyester paint. (Overall size = 750×380×900 mm). 2.00 Each 7 Supply and fixing of three seater S.S. waiting chair with seat & back made of special S.S. perforated 20 gauge sheet with S.S. handle with Y type S.S. frame, base is supported over M.S. Pipe 3 x 1.25, 16 gauge with fitting of nuts & bolts complete. Size 152cm (W), 40 cm, (D), 70cm (H) and seat height 41cm. All M.S. components are Epoxy polyester powder coated with the following specifications. Dry film thickness more than 45 microns. Pencil scratch hardness more than 2H.The weight of the complete unit 2.00 Each shall not be less than 35 Kg. 8 Supply and fixing of square shape Stool of size 450 mm, height - 450 mm, made up of 1.2mm thick CR Steel sheet fitted on round pipe frame structure of size minimum 25mm x 1.2 mm thick MS ERW tube. All steel components shall be powder coated epoxy polyester paint. 1.00 Each 9 Supply and fixing of standard size single Bed of Size 1875mm (L) x 900mm (W) × 380mm height made of Teak wood Grade - I, 4 supports of minimum Size 65×40 cross wise and 2 supports Longitudinally fixed with side frame of 100 mm width and 35mm thickness. End panels of 19 mm thick wooden Block board and lamination and of size not less than 300 mm, duly covered with Mat finished laminated with proper edge beading of M. P. teak wood grade -I (6 mm thick). Provision of all four legs as continuous single member (either sides of panels) and of size 100mm x 40mm complete with spirit polish on exposed wooden surface 2.00 Each 10 Supply and fixing of Bed side table size 400 × 450 × 450 made of 19mm thick wooden block board (National or equivalent) having 1 drawer and 1- rack (with operating knob) made of 15 mm thick shuttering ply, front, Top and side portions covered with Mat finish laminated (of formica or equivalent teak finish shade complete with spirit polish on all exposed wooden portion and painted with white enamel paint on inside back and bottom surfaces. 2.00 Each 11 Supply and fixing of M. P. Teak wood grade-I centre table of standard size with minimum size 900 x450 × 450, 19mm thick wooden Block board top (National or equivalent) covered with Mat finished lamination (Formica or equivalent) with teakwood grade-I round beading having projection of 12 mm on all four edges. One wooden shelf fixed with T. W. frame minimum 35 x 35 mm at 150 mm height from ground and M. P. teak wood Grade - I beading complete with four legs size 50 x 50 mm, Skelton of M. P. Teak wood Grade - I . All Exposed wooden portion nicely finished and spirit polished. 2.00 Each 12 Supply and fixing of wooden side table minimum size 600 × 600 × 450 made out of 19 mm block board with 1 mm mica on top and wooden edge bands on all sides. Legs to be made of 40 x 40 mm teak wood. All wooden parts to painted with melamine polish complete as per the directions of the engineer in charge. 2.00 Each Supply and fixing of wooden cushion chair of size 980(H) x 440(W)x 550(D) mm with low 13 back support, chair base made of wooden frame with chair seat and back made of medium density foam covered with cotton fabric tapestry with base 12mm thick plywood (National or equivalent) and two numbers wooden arms with round edges. All exposed wooden surface shall be spirit polish.

Refer document

Refer document

INR 1.46 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB