Tender For Work Of Installation Of Lighting Fitting And Pole In Smriti Upvan Park, Kanpur Road Scheme - Supply Of 3.0 Mt High Decorative Pole Made Of Mild Steel Galvanized Tubler Pole Having Different Profile , Bottem Profille 114 X 4 Mm Upto 1000 Mm & To, lucknow-Uttar Pradesh

Tender For Work of installation of lighting fitting and pole in Smriti Upvan Park, Kanpur Road Scheme - Supply of 3.0 mt high decorative pole made of mild steel galvanized tubler pole having different profile , bottem profille 114 x 4 mm upto 1000 mm & topprofile 60 mm x 3.2 mm upto 2000 mm with cast Aluminium embellisment. The pole has a service windo with 25 amp connector and SPMCBfor loop in & loop out . The pole is primer coat of PU paintedwith4 Nos of Foundation J-Bolt 16 mm dia 300 mm long one side threadedwith Nut and washer all complite as per direction of E/Ic.(Analysis Rate) 2 Supply and fixing ofdecorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and aboveprotection complete in all respect. SOR S.I No.1443/2018 CAT-AA 3 Supply and fixing offactory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 65 protection complete in all respect.. SOR S.I. No. 1454/2018 CAT-AAA 4 Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR S.I No.501/2018 5 10 sq. mm 2 core 6 Supply and fixing of plain or pin type copper tin plated cable socket ( Lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SOR S.I. No. 504/2018 7 10 sq. mm (504 C) 8 Supply and Wiring of submains with two nos. of 2.5 sq. mm.FRLSH PVCinsulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of allmaterial labour and T&P required for proper completion of the work as directed at site by Engineer in charge.(PWD,SOR-289/2018) (3x50+10x10=250 Mt) 9 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of 40 A TPN, complete in all respect.SOR S.I. No. 807/2018 10 Supply and Fixing of 0.5 Amp to 5 Amp. SP MCB (10KA)C,urve. CAT - A,SOR 2018/1001 11 E/W in foundation all complite as per direction of E/Ic.(1x50x 0.4x0.4x0.5=4.8 cum) 12 CC work in foundation in 1:2:4 cement core sand and 20 mm stone gritt all complite as per direction of E/Ic.(1x50x 0.4x0.4x0.6=3.74 cum) 13 Making suitable earthing of ST/Rail Pole with 2.5 M long 20 mm dia M.S Rod with 7/16 SWG GS wire in 15 mm dia 2.0 M long GI pipe duly clamped with 2 nos. of clamps and binding on pole including cost of labour & T&P etc required for proper completion of work. 14 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. (PWD-SOR,725(A)/2018 15 Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.(PWD-SOR,717/2018 16 DismentlingofACSRconductoretc.completein all respect asper direction of E/I.SI NO.627(labour rate ) 17 Supply of LED driver for led fitting approved make of following capacity (PSR) 18 18 watt to 50 watt 19 S/F of LED potted driver suitable for 150 w-200W light fixtures. Technical specification constant current potted driver vin 240 Vac, 50Hz, Vout:75-165V DC, PF>95 operating voltage range 140-270V, THD<10, lout-1350Ma 20 Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountendon non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc.The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.pwd 801AIncoming100 Amp. TPN-1 No Outgoing 63 Amp. TNP-2 Nos.Cat. B. Cubicle Type 21 labour charge for dismentaling steel tubular pole 9 Metre long designated 410 SP-29 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect pwd 2018/610 labour rate 22 Supply and fixing ofHDPE Pipe ISI marked Along with all Accessories Like Socket band, couplers etc. confirming to IS : 14930 Part-II Complete with fixing and Cutting jointing etc. Direct in Ground (75 smt mtr below ground label) including Excavation and Refilling the Trench but Excluding sand Cushioning and protective covering the trench But Excluding sand cushioning and protective covering etc. Complete as required Size 63 mm dia. (OD 63 mm and ID 51 mm nominal) Approved Rate 23 S/F of 40 Amp switch contactor as pe attached rate analysis complete in all respect as per direction of E/ic 24 S/F of condact timer switch 110-240 Vac-I complete in all respect as per direction of E/ic rate analysis as per attached

INR 1475 /-

INR 151200.0 /-

INR 32.64 Lakhs /-