|
| 1 | Supply and fix in replacement copper conductor cable 40/0.0076 Sqmm 3 core not less than 2 mtrs long with 5/6 Amp 3 Pin plug topsuitable for desert cooler complete all as specified and directed. |
| 2 | S&F in replacement set of Honeycomb Cooling Pad for desert cooler upto 50 Ltr Capacity of existing make complete all as specified and directed. |
| 3 | M&L for rewinding of exhaust fan/kit fan 12\" sweep 900 RPM motor of any make with super quality of winding copper wire of existing size complete with varnishing, backing, testing including painting with synthetic enameled paint including dismentaling of old unserviceable exhaust fan motor complete all as specifieda and directed. |
| 4 | S&F in repair of water lifting submersible pump of capacity 20 watt, 180V-230V suitable for desert cooler including necessary wiring complete all as specified and as directed. |
| 5 | Supply and fixing in repair of exhaust fan motor of 300mm sweep heavy duty for desert cooler complete as per sample complete all as specified and as directed. |
| 6 | S&F in replacement of PVC pipe 15mm dia suitable for desert coolers complete all as specified and as directed. |
| 7 | S&F in repair starting capacitor 4.0 MFD 230 Volts including testing complete all as specified and as directed. |
| 8 | S&F in repair of Fan blade of desert cooler heavy duty HDPE suitable for 4000/5000 CFT capacity of size 300mm sweep complete all as specified and directed. |
| 9 | M&L for servicing and testing of split / window type AC, capacity upto 1.5/2.0 Ton, any make, by cleaning cooling coil, condenser fins, blowing of dust from machines/air filters, checking and oiling/greasing of blower motor, checking and removing any vibration and leakage in the equipment including checking/repair to inter locking device for winter/summer to ensure cutting off of compressor/heating in case of failure of blower motor including taking down and refixing in position complete all as specified and directed.Note - Cost of minor repair, replacement of petty items such as nuts, bolts, washers, screws, rubber mounting pads of compressor etc, transportation of equipment to workshop and back is deemed to be inlusive in the unit rates quoted by the contractor. |
| 10 | Supply and fix in replacement, new compressor for split type / window type AC 1.5 Ton capacity including disconnecting, opening up, taking out burnt compressor by cuting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping thel water vapour ensuring leak proof system complete all as specified and as directed.Note: Compressor shall be tested to entire satisfaction of Engr-in- Charge and test results recorded and kept on charge. |
| 11 | Supply and fix in replacement, new compressor hermetic/rotary for split type / window type AC of 2 Ton capacity including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling |testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping the water vapour ensuring leak proof system complete all as specified and as directed.Note: Compressor shall be tested to entire satisfaction of Engr-in-Charge and test results recorded and kept on charge. |
| 12 | Supply and fix in replacement of starting relay suitable for Split/window AC capacity up to 2 ton complete all as specified and as directed. |
| 13 | Supply and fix in replacement of over load protection suitable for Split/window AC capacity up to 2 ton complete all as specified and as directed. |
| 14 | Supply & Fixing of Running Capacitor 50 (+- 5) MFD complete all as specified and directed |
| 15 | Supply and fix in replacement of blower motor 1/8 HP, double shaft, single phase suitable for window type AC up to 2 ton capacity including testing complete all as specified and as directed. |
| 16 | Supply and fix in replacement of power circuit breaker (PCB) kit for split type AC upto 2 ton complete all as specified and as directed. |
| 17 | Supply and fix in replacement of power circuit breaker (PCB) kit for window type AC for 1.5 ton complete all as specified and as directed. |
| 18 | S & F in repair of cooling fan blade suitable for Split AC of any make & capacity complete all as specified and as directed. |
| 19 | S & F in repair of Blower Fan Motor suitable for Split AC (Outdoor side) of any capacity & make complete all as specified and as directed. |
| 20 | S & F in repair of ML-1 contactor 240 volt, 25 Amp for split type AC 1.5/2.0 TR complete all as specified and as directed. |
| 21 | M & L in repair of copper tube 3/4\"\" with Insulation cover as per site requirementcomplete all as specified and as directed..Note:- Cost of brazing/ soldering of copper tube is deemed to be inlusive in the unit rates quoted by the contractor.) |
| 22 | M & L in repair of copper tube 1/4\"\" with Insulation cover as per site requirement complete all as specified and as directed..Note:- Cost of brazing/ soldering of copper tube is deemed to be inlusive in the unit rates quoted by the contractor. |
| 23 | Material and labour for trickle charging of refrigerant / gas or as required in AC/Refrigerator/Deep Freezer/Water Cooler, any capacity, after detection of leakage with soap solution/halide torch ,making the system leak proof by brazing/ soldering the leakage point, flushing out the moisture. contents trapped in the pipe line by charging CO2 gas and maintaininga the pressure for prescribed period complete all as specified and directed. |
| 24 | S&F in replacement of Sheet Metal Enclosure with metal clad socket and earth plug with one number MCB 20 Amp including connecting complete all as specified and as directed.Note- (i)The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour. |
| 25 | M&L in repair of sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cableincluding existing PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLSinsulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified.(Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length.) |
| 26 | Supply and fix in replacement new compressari suitable for refrigerator of capacity 310 Ltr including disconnecting opening up taking out burnt compressor by cuting/opening the pipe connections, fixing in position assembling, testing and commissiorning including oil charging after ensuring entire system leak proof complete all as specified and as directed. |
| 27 | Supply and fix in replacement new compressari suitable for deep freezer of capacity 210 Ltr including disconnecting opening up taking out burnt compressor by cuting/opening the pipe connections, fixing in position assembling, testing and commissiorning including oil charging after ensuring entire system leak proof complete all as specified and as directed. |
| 28 | S&F in repair Relay suitable for refrigerator/Deep freezer suitable as per there capacity complete all as specified and as directed. |
| 29 | S&F in repari PCB for Refrigerator upto 310 Ltr capacity & make recommended by the manufacturer complete all as specified and as directed. |
| 30 | Taking out water cooler of any make and capacity from position and cleaning the complete condenser coil & storage tank with chemical base solution and soda water including servicing, oiling of FHP motor checking of electrical & water supply connection and re-fixing the same with complete testing complete all as specified and as directed. |
| 31 | Supply and fix in replacement of new Compressor for water cooler ofl capacity 40/80 Ltr, including disconnecting, opening up,. taking out burnt taking out- burnt compressor byl cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including oil charging after ensuring entire system leak proof complete all as specified and as directed. |
| 32 | Supply and fix in replacement of new compressor for water cooler of capacity 150/150 Ltr, including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including oil charging after ensuring entire system leak proof complete all as specified and as directed. |
| 33 | Supply and fix in replacement blower motor 1/35 HP with base and clamp, rubber mountings for water coolers complēte all as specified and directed. |
| 34 | Material and labour for rewinding of blower motor of water cooler 40/80 Iitres capacity any make with super enamelled copper wire including replacement of wornout bushes etc and testing complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and fix in replaceiment push type water tap, 15 mm dia, chromium plated suitable for water cooler complete all as specified and directed. |
| 36 | Supply and fix in replaceiment of water drain pipe, 36mm dia upto 3 Mtr length for water cooler complete all as specified and directed. |
| 37 | S&F in replacement of starting capacitor capacity of 80-100 MFDall as specified and directed. |
| 38 | S&F of running capacitor 4 MFD 230 volts 50 Hzs AC suitable for water cooler including taking out old capacitor complete all as specified and directed. |
| 39 | Taking out old U/S voltage stabilizers of capacity upto 5 KVA from MES store/site and repair the samewith complete testing and fixing as specified and directed. |
| 40 | S&F in repair Main Relay 24 volts 25 Amps etc complete all as specified and directed. |
| 41 | S&F in repair Main Control Circuit (PCB) etc complete all as specified and as directed. |
| 42 | S & F in repair of busbar chamber capacity of 200 Amps, 4 way, 4 pole, 50 Hz, 415 Volts, on wall/pole/panel or grouted in ground with iron stand of suitable size with PCC of 1:4:8 in ground with proper lugs having 4 Nos of aluminium bus bar complete all as specified and directed. |
| 43 | Supply and fixing in replacement of VTPN DB 12 way suitable for Mounting MCCB as Incomer of rating 100 Amp with suitable rated bus bar having IP-43 protection and double metal doorincluding MCCB 100 Amps, AC, 415 Volt, 4 Pole, 16 KA with thermal magnetic trip unit (TMTU) adjustable thermal setting 0.7 - 1 x In, class II front face, Ics = 100% Icu as per IS/IEC 60947-2 complete all as specified and as directed. |
| 44 | Supply and fixing in repairMCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door complete all as specified and as directed. |
| 45 | S&F of MCB SPN 40 to 63 Amp 240 volt \"C\" 10 KAcurve complete all as specifed and directed. |
| 46 | S&F of MCB SP10 to 32 Amp 240 Volt \"C\" curve 10 KA complete all as specified and directed. |
| 47 | S&F in repair of MCCB 100 Amps, AC, 415 Volt, 4 Pole, 16 KA with thermal magnetic trip unit (TMTU) adjustable thermal setting 0.7 - 1 x In, class II front face, Ics = 100% Icu as per IS/IEC 60947-2 complete all as specified and directed. |
| 48 | S&F in repair of MCB SP 20-32 Amp 240 Volt \"C\" curve 10 KA complete all as specified and directed. |
