Tender For Stage Contract Ii For Sub Division Sallar= 1 Engagements of JCB as and when required for excavation and execution of various works of various natures including disposal of excavated material upto leads and liftsas per the direction of engineer in charge 2 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, all leads and lifts as directed by engineer incharge -All kinds of soil 3 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed within a lead of 50m (All kinds of Soil) 4 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : 5 Earth work in excavation by manualmeans in trenches for foundations, drains, pipes, cables etc .upto required depth ) and for shafts, wells, cesspits including dressing of sides and ramming of bottoms , including getting out excavated earth and disposal of surplus excavated earth as directed,( All kinds of Soil) 1 meter fromcutting edge 6 Supply and filling of RBM /Nallah muck for Stone soling or any backfilling or filling or any other work as directedof specified size including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacityincluding carriage of the same from approved source upto site of work complete 7 Supply and filling of Khak bajri including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacityincluding carriage of the same from approved source upto site of work complete( for Berm) 8 Providing / laying of RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete.10 9 12 10 14 11 16 12 18 13 24 14 28 15 32 16 36 17 40 18 Providing / laying of MS Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. 6 19 8 20 10 21 12 22 Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). 23 Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. 24 Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 63 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation of each layer with PRR of 8 to 10 Tonne capacity including rolling on screening, dust and crushed stone including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(Finished work to be measured) (ROLLING TO BE DONE STRICTLY AS PER DIRECTION OF ENGINEER IN CHARGE ) 75mm compacted thickness 25 Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 53 to 22.4mm size, stone screening 11.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(Finished work to be measured)(ROLLING TO BE DONE STRICTLY AS PER DIRECTION OF ENGINEER IN CHARGE ) 75mm compacted thickness 26 Providing, laying, spreading and compacting graded stone aggregate (sizerange 53 mm to 0.075 mm ) to wet mix macadam (WMM) specificationincluding premixing the material with water at OMC in mechanical mixplant, carriage of mixed material by tipper to site, for all leads & lifts,laying in uniform layers with mechanical paver finisher in sub- base / basecourse on well prepared surface and compacting with vibratory roller of 8to 10 tonne capacity to achieve the desired density, complete as perspecifications and directions of Engineer-in-Charge 27 Providing and applying tack coat using hot straight run bitumen ofgrade – VG-10, including heating the bitumen, spraying the bitumenwith mechanically operated spray unit fitted on bitumen boiler,cleaning and preparing the existing road surface as per specifications( necessary test mandatory )On bitumen/WBM/WMM surface @ 0.50 Kg/sqm. 28 Providing and applying tack coat using bitumen emulsion conforming toIS: 8887, using emulsion pressure distributer including preparing thesurface and cleaning with mechanical broom.With medium setting bitumen emulsionOn W.B.M. /W.M.M. @ 0.4 Kg/sqm.( necessary test mandatory ) 29 P/L B.M using crushed stone aggregates of specifiedgrading premixed with bituminous binder, transported tosite by tippers, laid over a previously prepared surfacewith paver finisher equi pped with electronic sensor tothe require d grade, level and alignment and rolling withsmooth wheeled, vibratory and tandem rollers as perspecifications to achieve the desired compaction and d.ensity, complete as per specifications and directions ofEngineer-in-Charge :50 to 100 mm average compactedthickness with bitumen of grade VG-10 @ 3.5%(percentage by weight of total mix) prepared in DrumType HMP of 60-90 TPH capacity. incl. Cost andcarriage of all materials involved.( necessary test mandatory ) 30 P/L SDBC using crushed stone aggregates of specifiedgrading , pre-mixed with bituminous binder and filler,transporting the hot mix to work site by tippers, layingwith paver finisher equipped wilh electronic sensor to therequired grade, level and alignment and rolling withsmooth wheeled, vibratory and tandem rollers to achievethe desire d compaction & density as perspecification,complete and as per directions of EngineerinCharge:25 mm compacted thickness with Bitumen :VG-10 @ 5% (percentage by weight of total mix) andlime filler @ 2%(percentage by weight of Aggregate)prepared in Drum Type HMP of60-90 TPH capacity. inclcost and carriage( necessary test mandatory ) 31 P/L of 6 mm thick seal coat of premixed fineaggregate(passing 2.36 mm and retained on 180 micronsieve) with bitumen using 128 Kg of bitumen of gradeVG -10 per cum of fine aggregate and 0.60 cum of fineaggregate per 100 sqm of road surface including hotmixing of fine aggregate and bitumen in hot mix plant,transporting the mixed material from plant site bymechanical transport up to the site of work, laying themixed material with paver finisher to required level andgrade rolling with road roller to achieve desiredcompaction including cost and carriage of all the materialhire charges of machinery and all taxes etc. complete( necessary test mandatory ) 32 Providing and fixing of water proof shamiyana (pandala with steel pipe frame) and kanats on hire charges basis of below mentioned sizes with all carriages to and fro and let out the same after completion of function(20x 20)for VVIPS with crewel ceiling/Sides (Along excel Sheets) 33 (30x 30)for general public with normal ceiling/sides withfurnishing (excel Sheets) 34 Supply of chairs ,arranging in rows behind barricading and VIP area on hire charges including all carriages to and fro completeplastic chairs 35 Supply of chairs ,arranging in rows behind barricading and VIP area on hire charges including all carriages to and fro completeVIP Chairs 36 Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length KD Wood 37 Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 30mm Second kail wood 38 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. 39 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge :Second class Kail wood 30mm 40 Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :125x75x4 mm 41 100x75x4 mm 42 Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with nuts and screws etc. complete :300x16 mm 43 250x16 mm 44 Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with necessary screws etc. complete :250x10 mm 45 100x10 mm 46 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 47 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pairof 15 mm C.P. brass pillar taps. 48 Providing and fixing PTMT bib cock of approved quality and colour15 mm nominal bore, 86 mm long, weighing not less than88 gms 49 Providing and fixing PTMT wall mixer of approved quality and colour. 50 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm 51 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 52 Hire Charges of Suction/sewageJeting machine 2200 PSI machine i/c POL & operator 53 Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. 54 Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 4% carriage 55 P/L in position cement concrete in1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 4% carriage 56 P/L in position cement concrete in1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 4% carriage 57 P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete.( all works upto plinth level)4% carriage 58 Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement 4% carriage 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) 59 Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. FE-500 D or more 60 FORM WORKCentering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases for columns 61 Return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc. 62 Suspended floors, roofings, landings, balcones and access plateform 63 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 64 40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 65 25mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 66 12mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. 67 12mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. 68 15mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. 69 15mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. 70 Engagement of labour /Masdoor for one day for doing work as per direction of engineer incharge 71 Engagement of skilled labour with all machinary like cutters , axe etc for purning of the trees 72 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. 73 Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive 74 Clearance of slipsdisposal lead upto 50 m and lift upto 1.5 m.in ordinary soils disposal lead upto 50 m and lift upto 1.5 m. 75 in soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m. 76 In soils; mixed with Decomposed Rocks; by blasting or any other means 77 Providing and applying 2.5mm thick road marking strips (retro-reflective)of specified shade/colour using hot thermoplastic material by fully/semiautomaticthermoplastic paint applicator machine fitted with profile shoe,glass beads dispenser, propane tank heater and profile shoe heater, drivenby experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreignmaterial etc. complete as per direction of Engineer-in-charge andaccordance with applicable specifications. 78 White washing with lime to give an even shade :Old work (two or more coats) 79 White washing with lime to give an even shade :Old work (one or more coats) 80 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work 81 Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.Old work ( One or more coats) 82 Providing and fixing precast reinforced cement concrete 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)kilometer stone as per standard design including finishing smooth in 1:3cement mortar ( 1cement : 3 fine sand) including the cost of earthwork, concrete in foundation, painting and lettering etc. .35x111x25 cm size. complete job. 83 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 30 cm girth upto and including 60 cm girth. 84 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 60 cm girth upto and including 120 cm girth. 85 Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with 16.0 (Road Work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. 16.66.1 Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm. 86 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete.welded 87 Providing and fixing hand rail of approved size by welding etc. to steelladder railing, balcony railing, staircase railing and similar works, includingapplying priming coat of approved steel primer and synthetic paint..M.S. tube 88 Providing and fixing hand rail of approved size by welding etc. to steelladder railing, balcony railing, staircase railing and similar works, includingapplying priming coat of approved steel primer and synthetic paint.G.I. pipes 89 Supplying/fixng of polygonal/RR masnory 2nd class quarry stone from approved source in dry with bond stones in G.I. wire crates of approved diameter by site incharge and mesh size of 100 x 100 mm and weight not less than 46 kg/crate including tipping,wrapping,cost of wire crates, carriages, loading, unloading all complete job strictly as per the direction of site incharge complete job 90 Supplying/fixng of boulder stone of approved size by site inchargein dry with bond stones in G.I. wire crates of approved diameter by site incharge and mesh size of 100 x 100 mm and weight not less than 46 kg/crate including tipping,wrapping,cost of wire crates, carriages, loading, unloading all complete job strictly as per the direction of site incharge complete job 91 Providing and fixing of PVC pipes Type -Bmaterial s weep hole or as required at site including all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 4 dia 92 Providing and fixing of PVC pipes Type -Bmaterial as weep hole or as required at siteincluding all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 3 dia 93 Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge Made of G.I. wire of dia 4 mm 94 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete. Hot finished welded type tubes 95 Providing and fixing of imported wood panelling ready made of thickness 12mm incl wooden joists,12mm ply, polishing complete job 96 Providing corrugated High Rib Color Coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m 97 Providing corrugated CGI sheet roof including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m 98 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe, 16mm OD(SDR-7.4) 99 Supply and fixing of ply wood including cost of nails/screws etc.6mm 100 12mm 101 19mm 102 supply and fixing of Plain Galvinised sheets 103 Fixing of available timber planks including cost of nails etc 104 Dismembering of timber including stacking within a lead of 50mts 105 Fixing of available CGI sheets including cost of nails/hooks as per requirement 106 Dismembering of CGI sheets including stacking within a lead of 50mts 107 Supply And Fixing Of popular wood 108 Nylon Rope of dia 20mm dia 109 CARRIAGE (Mechanical transport) Carriage of timber through mechanical transportupto 5km per km 110 5 to 10kms (additional) 111 10 to 20kms (additional) 112 beyond 20kms(additional) 113 Carriage of steel/CGI through mechanical transportupto 5km per km 114 5 to 10kms (additional) 115 10 to 20kms (additional) 116 beyond 20kms(additional) 117 Sand, stone aggregate below 40 mm nominal size5km 118 Beyond 5 km upto10 km per km 119 Beyond 10km upto 20 km per km 120 Carriage of bricks through mechanical transportupto 5km per km 121 5 to 10kms (additional) 122 10 to 20kms (additional) 123 beyond 20kms(additional) 124 HEADLOAD of material using ponys/manual labour for an av. leadCEMENT@RS.50 PER KM PER BAG 125 SAND/BAJREE @RS.200 PER KM PER CUM STEEL TMT BARS 126 Steel TMT bars 127 COLOR COATED GS SHEETS 128 puf panels 129 other construction material on pony
