Tender For Selection Of Working Agency For Electrification Work Under Pm Awas Yojnaunder Ee,Edd Barabanki. - Safe Loading Carriage Including Unloading And Proper Stacking Of Following Materials From Central Store Barabanki / Je Store To Site Of Work. 2 , barabanki-Uttar Pradesh

Tender For Selection of working agency for Electrification work Under PM Awas Yojnaunder EE,EDD Barabanki. - Safe loading Carriage including unloading and proper stacking of following materials from central store Barabanki / JE Store to site of work. 2 STP Pole 11 Mtr 3 Polymeric 11 KV Pin Insulator 4 Top Channel 5 Dropper Channel 6 Substation Base 7 MS Earthing Rod 8 Transformer 250 KVA 9 11 KV XLPE Cable AL 3x70 Sq.MM 10 LT XLPE Cable AL. 1x240 Sq.MM 11 ACSR Weasal Conductor 12 Jointing Kit 3x70 Sq.MM O/D 13 Stay Set Complete 14 Other Line Material 15 Dragging of pole from JE Dump Store to site 16 Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle andstay insulate etc. 17 Stringing and sagging of 11 KV line with ACSR Weasal Conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department) 18 Chemical Pipe Earthing Boring type 19 Installation of Mounting of Following capacityof Transformer including its connection between 11 KV and LT Line. 20 Mounting of 250 KVA Tranformer 21 Erectionof Substation type double pole with STP 11 Mtr. Long including mounting of Top Channal, base angle with clamps with nut & bolt 33/11 KV line. 22 Erectionof singleSTP 11 Mtr for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 23 Earthing of pole with MS Earthing. 24 Providing of various type materials. All materials shall be supplied by the contractor. 25 Nut & Bolt 26 Clamp for Top/ Dropper / X-arm and T-off Channel etc. 27 GI Pipe 3&4 DIA 28 G I. TPMO Set 29 LT XLPE Cable AL. 3.5x70 Sq.MM 30 PVC Insulated armoured Consumer Service AL. Cable 2x4 Sq.MM (As per current market rate) 31 LT T/F AL. Busbar 5x5 Sq.Ft. (As per current market rate) 32 Lockable Distribution Box of size 450x400 MM (Type C) (As per Current Market rate) 33 Outdoor Type LT Distribution bolts with a rupturing capacity of 5 KA at 415 or 415 or H called for individual items. Openable in front & back suitable for 3 phase for wire 50 Hz AC Supply & an ambient temparature of 45 deg. C. The Cubicile should be weather proof, Dust proof, Bermain proof and incloser protection shall be IP- as per IS 2147-1962 and IS-8623 the pannals & switeches boards shall be fabricated out of 40SWG CRCA Sheet Steel & Provided with 16SWG Hinged door including suitable Foundation. MAIN LT PANEL AT SUBSTATION -160 KVA.Incomer - 1 set of 400 Amp. TP MCCB with Spreader & Extended Hadle Metering on Incomer 1 Set of Digital Ammeter with ASS 1 Set of Digital Voltmeter with VSS 1 Set of LED type phase indication light (22.5MM) with control MCBs Outgoing -6 sts of 250 amp. TP MCCB with spreader & Extended handle (3No.+1No. Capacitor panel) 2 Sets of 100 Amp. TP MCCB with spreader & Extended handle. (As per current market rate) 34 Fixing of various type materials. All Labour T&P shall be supplied by the contractor. 35 Nut & Bolt 36 Clamp for Top/ Dropper / X-arm and T-off Channel etc. 37 GI Pipe 4&6 DIA 38 G I. TPMO Set 39 PVC Insulated armoured Consumer Service AL. Cable 2x4 Sq.MM (As per current market rate) 40 LT T/F AL. Busbar 5x5 Sq.Ft. (As per current market rate) 41 Lockable Distribution Box of size 450x400 MM (Type C) (As per Current Market rate) 42 Outdoor Type LT Distribution bolts with a rupturing capacity of 5 KA at 415 or 415 or H called for individual items. Openable in front & back suitable for 3 phase for wire 50 Hz AC Supply & an ambient temparature of 45 deg. C. The Cubicile should be weather proof, Dust proof, Bermain proof and incloser protection shall be IP- as per IS 2147-1962 and IS-8623 the pannals & switeches boards shall be fabricated out of 40SWG CRCA Sheet Steel & Provided with 16SWG Hinged door including suitable Foundation. MAIN LT PANEL AT SUBSTATION -160 KVA.Incomer - 1 set of 400 Amp. TP MCCB with Spreader & Extended Hadle Metering on Incomer 1 Set of Digital Ammeter with ASS 1 Set of Digital Voltmeter with VSS 1 Set of LED type phase indication light (22.5MM) with control MCBs Outgoing -6 sts of 250 amp. TP MCCB with spreader & Extended handle (3No.+1No. Capacitor panel) 2 Sets of 100 Amp. TP MCCB with spreader & Extended handle. (As per current market rate) 43 Concreating and pilinthing of ST& PCCPole 18x24 CM. 44 Laying of Underground 11kv XLPE Cable By drill Method/Manually 45 Laying of 11kv XLPE Cable By Overhead 46 Laying of Underground LT XLPE Cable AL. 3.5x70Sq.MM By Manually 47 LT Distribution Panel Plinth 48 Testing ofXLPE Cable all size. 49 Hosting of Cable all size. 50 Grouting of Pole 51 Fabricate with hole suitable size in steel items, receive from central store lightas top channel/dropper channel sub station base angle etc. 52 Looping of cable and mounting of pole all size. 53 Construction of retaining wall, fabrication & erection of Wiremesh fancing of size 5+3 & 2.0 M height around Transformer and with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 35×35×5 mm jointed with nuts and bolts. The panel must be supported with MS Glat of size 50×6 mm. Wirremesh of size 10 SWG rectangle type, its painting as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost). 54 Construction of masonry type transformer plinth of size 1.5×1.5×1.5 M with brick, cement, Coarse sand, sand & brick ballast, filling of sand in the hollow space, plastering outer surface in ratio 1:4:6 top of the plinth 4” thickness grouting of 2 nos. MS Channel of size 100×50×200 mm on the top of the plinth for placement of transformer. (All the material will be arranged by the contractor) 55 Other line work

INR 3540 /-

INR 99500.0 /-

INR 99.18 Lakhs /-